Export limit exceeded: 412880 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 412880 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 106183 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (106183 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68335 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rds: drop incoming messages that cross network namespace boundaries rds_find_bound() looks up the destination socket using a global rhashtable keyed solely on (addr, port, scope_id). Network namespaces are not part of the key, so a sender in netns A can deliver an incoming message (inc) to a socket that lives in a different netns B. When this happens, inc->i_conn points to an rds_connection whose c_net is netns A, but the receiving rs lives in netns B. Once the child process that created netns A exits, cleanup_net() calls rds_loop_exit_net() -> rds_loop_kill_conns() -> rds_conn_destroy(), freeing that connection. If the survivor socket in netns B still holds the inc, any subsequent dereference of inc->i_conn is a use-after-free. There are two dangerous sites in rds_clear_recv_queue(): 1. inc->i_conn->c_lcong (offset 88 of freed rds_connection, size 200) read via rds_recv_rcvbuf_delta() -- confirmed by KASAN. 2. inc->i_conn->c_trans->inc_free(inc) (function pointer at offset 80) called via rds_inc_put() when the inc refcount reaches zero -- same race window, potential call-through-freed-object primitive. The bug is reachable from unprivileged user namespaces (CLONE_NEWUSER + CLONE_NEWNET), available since Linux 3.8. Fix this by rejecting the delivery in rds_recv_incoming() when the socket returned by rds_find_bound() belongs to a different network namespace than the connection that carried the message. Use the existing rds_conn_net() / sock_net() helpers and net_eq() for the comparison. | ||||
| CVE-2026-68329 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Wait for completion instead of returning early in iommu_completion_wait() need_sync is a per-IOMMU flag shared by all domains and devices behind that IOMMU. It is set whenever a command is queued with sync == true and cleared when a completion-wait (CWAIT) command is queued. However, a cleared need_sync only means that a covering CWAIT has been queued, not that all previously queued commands have actually completed in hardware. iommu_completion_wait() read need_sync locklessly and returned early when it was false. This breaks the "block until all previously queued commands have completed" contract in a multi-CPU scenario: CPU2: queue inv-B => need_sync = true CPU1: queue CWAIT(N); need_sync = false; then wait_on_sem(N) CPU2: read need_sync == false => return 0 (no wait!) CPU2 returns without waiting for any sequence number even though its inv-B may not have completed yet (CWAIT(N), queued after inv-B, has not been signaled). CPU2 then proceeds to, for example, free page-table pages while the IOMMU can still walk stale translations, opening a use-after-free window. This is a logical race in the meaning of the flag, not a memory-visibility issue, so barriers alone do not help. Fix it without losing the optimization of avoiding redundant CWAIT commands: take iommu->lock before testing need_sync, and when it is false do not return early but wait for the last allocated sequence number (cmd_sem_val). Since need_sync == false implies no sync command was queued after the last CWAIT, that CWAIT is FIFO-ordered after every not-yet-completed command, so waiting for its sequence number guarantees all prior commands (possibly queued by another CPU) have completed. The common path with pending work is unchanged and no extra hardware command is issued. | ||||
| CVE-2026-68320 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix auth_chunk_list capacity check in sctp_auth_ep_add_chunkid sctp_auth_ep_add_chunkid() uses SCTP_NUM_CHUNK_TYPES (20) as the capacity limit for ep->auth_chunk_list, allowing it to hold up to 20 chunk entries (param_hdr.length up to 24). However, the copy destination asoc->c.auth_chunks in struct sctp_cookie is only SCTP_AUTH_MAX_CHUNKS (16) entries (20 bytes). When more than 16 chunks are added, sctp_association_init() memcpy overflows the destination by up to 4 bytes. Fix by using SCTP_AUTH_MAX_CHUNKS as the capacity limit, matching the destination capacity. | ||||
| CVE-2026-68315 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: validate stream count in sctp_process_strreset_inreq() When processing a RESET_IN_REQUEST from a peer, sctp_process_strreset_inreq() derives the stream count from the parameter length but does not check whether the resulting RESET_OUT_REQUEST would exceed SCTP_MAX_CHUNK_LEN. The OUT request header (sctp_strreset_outreq, 16 bytes) is 8 bytes larger than the IN request header (sctp_strreset_inreq, 8 bytes). Generally, the IP payload is bounded to 65535 bytes, so the stream list cannot be large enough to trigger the overflow. However, on interfaces with MTU > 65535 (e.g., loopback with IPv6 jumbograms), a stream list that fits within the incoming IN parameter can cause a __u16 overflow in sctp_make_strreset_req() when computing the OUT request size, leading to an undersized skb allocation and a kernel BUG: net/core/skbuff.c:207 skb_panic net/core/skbuff.c:2625 skb_put net/sctp/sm_make_chunk.c:1535 sctp_addto_chunk net/sctp/sm_make_chunk.c:3695 sctp_make_strreset_req net/sctp/stream.c:655 sctp_process_strreset_inreq The local setsockopt path validates the generated reset request size. However, for an incoming-only reset, it accounts for the smaller IN request even though the peer must generate an OUT request with the same stream list. Such a request cannot be completed successfully by the peer. Reject peer IN requests whose corresponding OUT request would exceed SCTP_MAX_CHUNK_LEN. Also tighten the local check so it does not send an IN request that would require an oversized OUT request from the peer. | ||||
| CVE-2026-68299 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: vmxnet3: fix BUG_ON in vmxnet3_get_hdr_len() for Geneve packets vmxnet3_get_hdr_len() assumes gdesc->rcd.v4/v6/tcp always describe the outer header, but for a Geneve-encapsulated packet the device can set them based on the inner header instead, signalled by the VMXNET3_RCD_HDR_INNER_SHIFT bit in the completion descriptor. Since the function never skips the outer encapsulation, this mismatch triggers: - BUG_ON(hdr.ipv4->protocol != IPPROTO_TCP), because the outer protocol is UDP (Geneve), not TCP. - BUG_ON(hdr.eth->h_proto != ...), when the tunnel's outer and inner IP versions differ (e.g. outer IPv6/inner IPv4 or vice versa). Check VMXNET3_RCD_HDR_INNER_SHIFT up front and bail out, since the function cannot locate the inner header it would need to parse. Also convert the remaining BUG_ON()s in this function to return 0 defensively. | ||||
| CVE-2026-68298 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/vm: Fix SVM leak on resv obj alloc failure in xe_vm_create() Commit 9e9787414882 ("drm/xe/userptr: replace xe_hmm with gpusvm") made xe_svm_init() unconditional in xe_vm_create() and extended it to also initialize a "simple" gpusvm state for non-fault-mode VMs. The matching xe_svm_fini() call in xe_vm_close_and_put() was updated to run unconditionally, but the error unwind path in xe_vm_create() was not. On the drm_gpuvm_resv_object_alloc() failure path, xe_svm_init() has already succeeded but xe_svm_fini() is only called when XE_VM_FLAG_FAULT_MODE is set. For non-fault-mode VMs this leaves vm->svm.gpusvm partially initialized and leaks the resources allocated by drm_gpusvm_init(). For fault-mode VMs, xe_svm_init() additionally acquires the pagemap owner via drm_pagemap_acquire_owner() and the pagemaps via xe_svm_get_pagemaps(). Those resources are released by xe_svm_close(), not xe_svm_fini(). On the same error path, xe_svm_close() is not called either, so fault-mode VMs leak the pagemap owner and pagemaps. Fix both leaks: - Call xe_svm_fini() unconditionally on the err_svm_fini path, matching the unconditional xe_svm_init() call. Move the vm->size = 0 assignment out of the conditional so the xe_vm_is_closed() assert in xe_svm_fini() (and xe_svm_close()) holds for both modes. - Call xe_svm_close() for fault-mode VMs before xe_svm_fini(), matching the ordering used in xe_vm_close_and_put(). (cherry picked from commit ca2a3587d577ba764e0fe628fb676244fc33ddd4) | ||||
| CVE-2026-68297 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix u16 MTU truncation in media and bearer MTU validation Both TIPC_NL_MEDIA_SET and TIPC_NL_BEARER_SET accept user-supplied MTU values but only enforce a minimum bound, not a maximum. When a user sets the MTU to a value exceeding U16_MAX (65535), it passes validation but is silently truncated when assigned to u16 fields l->mtu and l->advertised_mtu in tipc_link_create(). Values like 65536 (0x10000) truncate to 0, causing a division by zero in tipc_link_set_queue_limits() which computes TIPC_MAX_PUBL / (l->mtu / ITEM_SIZE). Other overflowing values (e.g. 65537-131071) produce small incorrect MTU values, resulting in link malfunction behaviors. Crash stack (triggered as unprivileged user via user namespace): tipc_link_set_queue_limits net/tipc/link.c:2531 tipc_link_create net/tipc/link.c:520 tipc_node_check_dest net/tipc/node.c:1279 tipc_disc_rcv net/tipc/discover.c:252 tipc_rcv net/tipc/node.c:2129 tipc_udp_recv net/tipc/udp_media.c:392 Two independent paths lack the upper bound check: 1. tipc_udp_mtu_bad() -- called from __tipc_nl_media_set() (MEDIA_SET) 2. inline check in __tipc_nl_bearer_set() at bearer.c:1160 (BEARER_SET) Fix both by rejecting MTU values above U16_MAX. | ||||
| CVE-2026-68294 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: qrtr: restrict socket creation to the initial network namespace QRTR keeps its entire port and node state in module-global variables that are not partitioned per network namespace: qrtr_local_nid is a single global node id (always 1) and qrtr_ports is a single global xarray. qrtr_port_lookup() and qrtr_local_enqueue() operate on that global state with no network-namespace check, and qrtr_create() places no restriction on the namespace a socket is created in. As a result an unprivileged process that creates an AF_QIPCRTR socket in a separate network namespace, e.g. via unshare(CLONE_NEWUSER | CLONE_NEWNET), can send QRTR datagrams - including control-plane messages such as QRTR_TYPE_NEW_SERVER - to QRTR sockets owned by another namespace, and vice versa. The receiving socket sees such a message as coming from node id 1, indistinguishable from a legitimate local client, breaking the isolation that network namespaces are expected to provide. QRTR is a transport to global hardware endpoints (the modem and other remote processors) and has no per-namespace semantics; its in-kernel name service already creates its socket in init_net only. Confine the socket family to the initial network namespace, as other non-namespace-aware socket families do (see llc_ui_create() and the ieee802154 socket code). | ||||
| CVE-2026-49410 | 1 Tinyhumansai | 1 Openhuman | 2026-10-19 | 8.1 High |
| OpenHuman is an open-source agent harness available as a desktop application and Rust library. Versions before 0.56.0 allow cross-site request forgery against the unauthenticated GET /auth/telegram loopback callback because telegram_auth_handler consumes an attacker-supplied one-time Telegram login token and passes the returned JWT to credentials::ops::store_session without validating browser fetch metadata or the request origin. An attacker with an OpenHuman account can cause a user with the local core running to visit a malicious page that requests the /auth/telegram endpoint on loopback port 7788, switching the user's active local session to the attacker's backend account and exposing subsequent agent actions, memory writes, and Telegram messages associated with that session to the attacker. This issue is fixed in version 0.56.0. | ||||
| CVE-2026-112773 | 1 Craftcms | 1 Craft Cms | 2026-10-19 | 8.8 High |
| Craft CMS from 5.0.0 before 5.11.0 contains a remote code execution vulnerability that allows authenticated Control Panel users to escape the Twig sandbox by passing uncleansed criteria to getNext, getPrev, or getOwners. Attackers can inject Yii "as" or "on" config keys to attach malicious event handlers that execute when the element query runs, achieving code execution as the web user. | ||||
| CVE-2026-112301 | 1 Orbitale | 1 Imagemagick-php | 2026-10-19 | 7.3 High |
| A security flaw has been discovered in orbitale imagemagick-php up to 3.3.5. Affected by this issue is the function Command::font of the file src/Command.php. The manipulation of the argument fontFile results in os command injection. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-111924 | 1 Fleetdm | 1 Fleet | 2026-10-19 | 7.5 High |
| Fleet before 4.83.0 contains a denial of service vulnerability that allows unauthenticated attackers to exhaust server memory by sending gzip-compressed request bodies. Attackers can send small, highly compressed requests with Content-Encoding: gzip to unauthenticated endpoints that expand during decoding, crashing the entire Fleet instance. | ||||
| CVE-2026-111897 | 1 Phpmyfaq | 1 Phpmyfaq | 2026-10-19 | 7.1 High |
| phpMyFAQ 4.2.0-alpha before 4.2.0-beta contains an authorization bypass vulnerability that allows category-restricted editors to manage attachments of FAQs outside their categories by supplying arbitrary record IDs. Attackers in medium permission mode can send upload or delete requests with a target record_id or attachment ID to tamper with or remove files on unauthorized FAQs. | ||||
| CVE-2026-111881 | 1 Freerdp | 1 Freerdp | 2026-10-19 | 7.6 High |
| FreeRDP from 3.14.1 before 3.32.0 contains an integer underflow in the WinPR BMP writer, where a mismatched stride calculation passes SIZE_MAX - 3 to Stream_Zero for sub-byte images. A malicious RDP clipboard peer can return a crafted 1-bpp BMP processed by clipboard_synthesize_image_format_to_bmp for CF_DIB/CF_DIBV5, crashing the client or causing an out-of-bounds write. | ||||
| CVE-2026-111872 | 1 Itsmeravitejak | 1 Online-examination-system | 2026-10-19 | 7.3 High |
| A security vulnerability has been detected in itsmeravitejak Online-Examination-System up to e6208e630b14657999bbfe4c9912302d2a1e2449. This affects the function MySQLDB::valid/MySQLDB::getresults/MySQLDB::noresults/MySQLDB::getExams/MySQLDB::latestExamID/MySQLDB::getreport of the file results.php/include/database.php. The manipulation of the argument id/user/topic leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-111854 | 1 Tektronix | 1 3 Series Mdo | 2026-10-19 | 8.1 High |
| An issue was discovered on Tektronix 3 Series MDO devices before 1.21.1. A path traversal vulnerability in the SCPI FILESystem command interface allows remote attackers to read or modify arbitrary files on the device through insufficient validation of file paths supplied to filesystem access commands. | ||||
| CVE-2026-21589 | 1 Atlassian | 20 Bamboo, Bamboo Data Center, Bamboo Server and 17 more | 2026-10-19 | 7.5 High |
| This is a vulnerability in Bitbucket Data Center, Confluence Data Center, Jira Service Management Data Center, Jira Software Data Center, Bamboo Data Center. Crowd Data Center, Crucible and Fisheye. This Arbitrary File Access vulnerability allows an unauthenticated attacker to access specific files within the web application root directory in affected versions. Exploitation requires prior knowledge of the target file's exact name and path; this vulnerability does not allow attackers to enumerate or list directory contents. In some configurations, there may be some sensitive files that make this highly severe. This vulnerability allows an unauthenticated remote attacker to access specific files within the web application root directory in affected versions. The vulnerability must be addressed for affected versions of: -- Bitbucket Data Center, introduced in version >= 4.6.0, fix versions: 9.4.26, 10.2.8, 10.5.1 -- Confluence Data Center, introduced in version >= 5.10.0, fix versions 9.2.26, 10.2.19 -- Crowd Data Center, introduced in version >= 2.11.0, fix versions 6.3.7, 7.0.3, 7.1.7, 7.2.4 -- Jira Software Data Center, introduced in version >= 7.1.0, fix versions 9.12.40, 10.3.26, 11.3.12 -- Jira Service Management Data Center, introduced in version >= 3.1.0, fix versions 5.12.40, 10.3.26, 11.3.12 -- Bamboo Data Center >= 7.0.1, fix versions 10.2.24, 12.1.12 -- Crucible, fix versions 4.9.15 -- Fisheye, fix version 4.9.15 -- Exploitation requires prior knowledge of the target file's exact name and path. The vulnerability does not include the capability to enumerate or list directory contents. | ||||
| CVE-2026-42616 | 1 Tuxera | 1 Ntfs-3g | 2026-10-19 | 7.8 High |
| In NTFS-3G before 2026.7.7, a heap buffer overflow exists in cat() in ntfscat.c that allows an attacker to corrupt heap memory in the ntfscat binary by crafting a malicious NTFS image. The overflow is triggered by reading a file. | ||||
| CVE-2026-75353 | 1 Eipstackgroup | 1 Opener | 2026-10-19 | 7.5 High |
| OpENer v2.3/ commit 76b95cf, contains an out-of-bounds read in the server-side EtherNet/IP ForwardOpen connection-path parser. This allows a remtoe attacker to cause a denial of service | ||||
| CVE-2026-112307 | 1 Sqlparse Project | 1 Sqlparse | 2026-10-19 | 7.3 High |
| sqlparse through 0.6.0 contains a PHP code injection vulnerability that allows attackers to inject PHP expressions by supplying SQL text containing unescaped dollar signs. Attackers can embed ${expr} or {${expr}} sequences that OutputPHPFilter places in double-quoted strings, executing arbitrary PHP code when the generated snippet runs. | ||||