Export limit exceeded: 412903 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 412903 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (412903 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90206 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: fix max_qid race between configfs and controller allocation The function nvmet_subsys_attr_qid_max_store() can race against nvmet_alloc_ctrl() when a subsystem's max_qid limit is modified. Suppose max_qid is currently 64. If nvmet_alloc_ctrl() executes: ctrl->sqs = kzalloc_objs(struct nvmet_sq *, subsys->max_qid + 1); and at this exact point, a userspace process changes max_qid to 128, nvmet_subsys_attr_qid_max_store() will set the new max_qid value. It attempts to delete active controllers to force a reconnect, but the new controller won't be deleted because it hasn't been added to the subsys->ctrls list yet. nvmet_alloc_ctrl() then proceeds and adds the new controller to the subsys->ctrls list. Later, when nvmet_install_queue() is called, it will see max_qid set to 128, but the memory allocated for sqs is only sized for 64 entries. This results in a KASAN out-of-bounds warning and potential memory corruptions. Fix this by protecting the queue allocations and list insertion in nvmet_alloc_ctrl() with down_read(&nvmet_config_sem). Because nvmet_subsys_attr_qid_max_store() acquires down_write(&nvmet_config_sem) to modify the attribute, this safely prevents the configfs writer from modifying max_qid during controller creation. Copy the max_qid from the subsystem to the controller's structure during the allocation; ctrl->max_qid never changes as long as the controller remains in LIVE state, so this will prevent similar race conditions. | ||||
| CVE-2026-90205 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate orphan slot during inode read Patch series "ocfs2: validate active orphan slots during inode read". OCFS2 trusts active ordinary and append-DIO orphan slots read from dinodes. A corrupted slot can therefore index osb_orphan_wipes or the slot-local system-inode cache outside their allocations before the corruption is reported. Patch 1 validates the ordinary orphan slot used by inode wipe processing. Patch 2 validates the append-DIO orphan slot used by DIO completion and orphan recovery. Both checks reject corrupt metadata at the existing inode validation boundary. This patch (of 2): [BUG] A corrupted dinode with OCFS2_ORPHANED_FL can carry an i_orphaned_slot outside the mounted filesystem slot range. ocfs2_wipe_inode() uses it to index osb_orphan_wipes before looking up the orphan directory, causing an out-of-bounds memory access. BUG: KASAN: slab-use-after-free in ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102 Read of size 8 at addr ffff88800b767c00 by task kworker/u8:3/85 Call Trace: ... ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102 ocfs2_wipe_inode+0x292/0xf70 fs/ocfs2/inode.c:840 ocfs2_delete_inode fs/ocfs2/inode.c:1155 [inline] ocfs2_evict_inode+0x6c9/0x1170 fs/ocfs2/inode.c:1295 evict+0x38e/0x8f0 fs/inode.c:810 iput_final fs/inode.c:1914 [inline] iput fs/inode.c:1966 [inline] iput+0x55b/0x8b0 fs/inode.c:1926 ocfs2_recover_orphans+0x610/0xe40 fs/ocfs2/journal.c:2374 ocfs2_complete_recovery+0x5af/0xd00 fs/ocfs2/journal.c:1373 ... [CAUSE] ocfs2_validate_inode_block() validates i_suballoc_slot but leaves the active ordinary orphan slot unchecked. Downstream consumers assume that the value is smaller than osb->max_slots. [FIX] Reject an active i_orphaned_slot outside the slot range during dinode validation, before the inode reaches orphan wipe processing. | ||||
| CVE-2026-90204 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate DIO orphan slot during inode read [BUG] A corrupted append-DIO dinode (high byte at offset 0xa1 corrupted from 0 to 1) can carry an i_dio_orphaned_slot outside the mounted filesystem slot range and trigger a use-after-free error: BUG: KASAN: slab-use-after-free in ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102 Read of size 8 at addr ffff88800b767c00 by task kworker/u8:3/85 Call Trace: ... ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102 ocfs2_wipe_inode+0x292/0xf70 fs/ocfs2/inode.c:840 ocfs2_delete_inode fs/ocfs2/inode.c:1155 [inline] ocfs2_evict_inode+0x6c9/0x1170 fs/ocfs2/inode.c:1295 evict+0x38e/0x8f0 fs/inode.c:810 iput_final fs/inode.c:1914 [inline] iput fs/inode.c:1966 [inline] iput+0x55b/0x8b0 fs/inode.c:1926 ocfs2_recover_orphans+0x610/0xe40 fs/ocfs2/journal.c:2374 ocfs2_complete_recovery+0x5af/0xd00 fs/ocfs2/journal.c:1373 ... [CAUSE] ocfs2_del_inode_from_orphan() uses i_dio_orphaned_slot to index the slot-local system inode cache. The dinode validator does not check this active slot, so an out-of-range value produces an invalid cache entry pointer that is dereferenced as an inode pointer. [FIX] Reject an active i_dio_orphaned_slot outside the slot range during dinode validation, before DIO orphan recovery can consume it. | ||||
| CVE-2026-90187 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: null_blk: free zones array on device power-off null_init_zoned_dev() allocates dev->zones when a zoned device is powered on, but null_del_dev() never frees it on power-off; dev->zones is only freed later in null_free_dev(), when the configfs directory is removed. If the device is powered off and then on again, null_init_zoned_dev() allocates a new array and overwrites the dev->zones pointer, leaking the previous allocation each power cycle. Free dev->zones in null_del_dev() via null_free_zoned_dev() to solve it. And calling null_free_zoned_dev() in null_free_dev() is no longer necessary because every caller already invokes null_del_dev() first: via nullb_group_drop_item() before nullb_device_release(), in the null_add_dev() error path of null_create_dev(), and in null_destroy_dev(). Remove the redundant call. And take &lock around zone_cond_store() in the two store wrappers to serialize dev->zones check-and-deref against its alloc/free, which already run under &lock. The reason there was no problem before is that only nullb_device_release() or null_exit() frees the dev->zones, which guarantees that subsequent users won't access the configfs interface. | ||||
| CVE-2026-90183 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: blk-iolatency: clear delay state when freeing policy data io.latency can throttle a group which has no latency target of its own. When a sibling misses its target, check_scale_change() scales down its peers, and a peer that reaches queue depth one gets blkcg_use_delay() called on it on every further scale-down, even with min_lat_nsec == 0. iolatency_pd_offline() resets the target through iolatency_set_min_lat_nsec(), which clears the delay only on a nonzero to zero transition, so it never clears such a peer. Freeing the policy data then leaves blkg->use_delay set and blkcg->congestion_count elevated with nothing left that can drop it. blk_cgroup_congested() then returns true for every task in that cgroup and its descendants for as long as the cgroup lives: page_cache_sync_ra() cuts readahead to a single page, page_cache_async_ra() skips it altogether, and __folio_throttle_swaprate() takes swap_avail_lock and schedules a throttle on anonymous folio allocation. Clear the delay in iolatency_pd_free(). By then bio-held blkg references have drained, or the queue is frozen for policy deactivation, so check_scale_change() cannot re-arm it. The free callback can also see policy data which was never attached to a blkg, hence the pd->blkg check. | ||||
| CVE-2026-90182 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: blk-iocost: clear delay state when freeing policy data iocg_kick_delay() turns sufficiently large debt into an explicit block-cgroup delay with blkcg_set_delay(), setting blkg->use_delay to -1 and incrementing blkcg->congestion_count. Clearing it again depends on iocg_kick_delay() running from the period timer, the waitq timer or the issue path. ioc_pd_free() removes the iocg from active_iocgs and cancels its waitq timer, and no further bios can arrive, so once it has run nothing is left which can reduce the debt and clear the delay. The blkcg stays marked congested for the rest of its life. blk_cgroup_congested() then returns true for every task in that cgroup and its descendants: page_cache_sync_ra() cuts readahead to a single page, page_cache_async_ra() skips it altogether, and __folio_throttle_swaprate() takes swap_avail_lock and schedules a throttle on anonymous folio allocation. Clear it explicitly, after the list removal and the synchronous hrtimer_cancel() so that neither timer processing nor an I/O path can re-arm it. The free callback can also see policy data which was never attached to a blkg, hence the pd->blkg check. | ||||
| CVE-2026-90179 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix deadlock in complain-mode change_hat The use of change_hat when in complain mode can cause a deadlock when the hat doesn't exist and a new learning profile is created for the missing profile. This is because change_hat() has taken the lock to search the hat list and creating the new learning profile needs to take the lock to add it to the list. From the bug report: Originally found in 7.0.0 in LTS ubuntu 26.04 with pam_apparmor + su in complain mode set to change hats. Then verified in newest available vanilla kernel I've compiled to see if still present: 7.2-rc7 vanilla -> affected checked also some other kernels: 6.18.44 vanilla -> affected 6.12.95 with debian patches -> unaffected On systems without bug (for example 6.12.95 debian) it just prints: aa_change_hat rc=0 On systems with bug, the executable always hangs, prints nothing and becomes unkillable. (And once stuck this way, it will cause any further hat changes to also cause the changing process to get stuck) Then in syslog you can find hint about cause: kernel: INFO: task hat:3409 blocked for more than 483 seconds. kernel: Not tainted 7.2.0-rc7 #1 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: task:hat state:D stack:0 pid:3409 tgid:3409 ppid:2605 task_flags:0x400000 flags:0x00080800 kernel: Call Trace: kernel: <TASK> kernel: __schedule+0x48f/0xfe0 kernel: schedule+0x27/0xa0 kernel: schedule_preempt_disabled+0x15/0x30 kernel: __mutex_lock.constprop.0+0x569/0xa10 kernel: aa_new_learning_profile+0x15f/0x210 kernel: build_change_hat+0x19f/0x3b0 kernel: change_hat.isra.0+0x5dd/0xd60 kernel: aa_change_hat+0x2f3/0x710 kernel: aa_setprocattr_changehat+0x121/0x1f0 kernel: do_setattr+0x28c/0x340 kernel: apparmor_setselfattr+0x20/0x50 kernel: security_setselfattr+0xf6/0x110 kernel: __x64_sys_lsm_set_self_attr+0x53/0x90 kernel: do_syscall_64+0xdd/0x5e0 kernel: ? __mod_memcg_lruvec_state+0xfd/0x260 kernel: ? lruvec_stat_mod_folio+0x8d/0xd0 kernel: ? __folio_mod_stat+0x2d/0x90 kernel: ? map_anon_folio_pte_nopf+0xd1/0x1f0 kernel: ? do_anonymous_page+0x184/0xa10 kernel: ? __handle_mm_fault+0x805/0x870 kernel: ? count_memcg_events+0xef/0x230 kernel: ? handle_mm_fault+0x1f0/0x2f0 kernel: ? do_user_addr_fault+0x2bb/0x7b0 kernel: ? do_syscall_64+0x94/0x5e0 kernel: ? exc_page_fault+0x75/0x160 kernel: entry_SYSCALL_64_after_hwframe+0x76/0x7e kernel: RIP: 0033:0x7f815e134c8d kernel: RSP: 002b:00007fff6df94ea8 EFLAGS: 00000246 ORIG_RAX: 00000000000001cc kernel: RAX: ffffffffffffffda RBX: 0000556d8c81d040 RCX: 00007f815e134c8d kernel: RDX: 0000000000000046 RSI: 0000556d8c81d040 RDI: 0000000000000064 kernel: RBP: 00007fff6df94ef0 R08: 00007f815e212ac8 R09: 000000000000000c kernel: R10: 0000000000000000 R11: 0000000000000246 R12: 0000556d8c81d010 kernel: R13: 0000000000000026 R14: 0000000000000046 R15: 0000000000000064 kernel: </TASK> kernel: INFO: task hat:3409 is blocked on a mutex likely owned by task hat:3409. To fix the issue, lift the locking out of the core of aa_new_learning_profile(), introduce a wrapper function that takes the lock where needed, and have build_change_hat() call the core function that no longer takes the lock. In addition fix 4 other issues introduced by commit 32e92764d6f8d ("apparmor: grab ns lock and refresh when looking up changehat child profiles") - aa_get_profile_rcu() was replaced-by: aa_get_profile without the accompanying rcu_dereference_protected() - an extra aa_get_label(label) was introduced at the start of change_hat() without an accompanying aa_put_label() causing a reference count leak. - a reference count leak was introduced in the label_is_stale(label) case, where the newest profile would be leaked instead of the label passed to the function. - a potential UAF when the lookup walks up the tree with new_ns != ns the new label refere ---truncated--- | ||||
| CVE-2026-90177 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Check pointer type for all atomic RMW paths Atomic RMW verification records an instruction pointer type only when the current destination is PTR_TO_ARENA. A second path can therefore reach the same instruction with an ordinary pointer without comparing it against the saved arena type. The post-verification fixup uses the saved type to rewrite the instruction to BPF_PROBE_ATOMIC for every path. Record the actual destination type for all atomic RMW paths so the existing mismatch check rejects incompatible uses of one instruction. | ||||
| CVE-2026-90174 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix slab-out-of-bounds read in ksmbd_alloc_user() ksmbd_alloc_user() copies resp->hash_sz bytes out of the mountd IPC login response with user->passkey_sz = resp->hash_sz; user->passkey = kmalloc(resp->hash_sz, KSMBD_DEFAULT_GFP); if (user->passkey) memcpy(user->passkey, resp->hash, resp->hash_sz); resp->hash_sz is a __u16 supplied by the response, but resp->hash[] is only KSMBD_REQ_MAX_HASH_SZ bytes. A malformed or malicious login response can set hash_sz well beyond that (up to 65535), so the memcpy() reads past the end of the response object. ipc_validate_msg() does not bound hash_sz, so reject any response whose hash_sz exceeds the on-stack hash[] buffer before allocating and copying. [ 2030.238706] BUG: KASAN: slab-out-of-bounds in ksmbd_alloc_user+0x278/0x680 [ 2030.240549] Read of size 65535 at addr ffff888121bb6680 by task kworker/4:1/18611 [ 2030.242296] [ 2030.242710] CPU: 4 UID: 0 PID: 18611 Comm: kworker/4:1 Not tainted 7.1.0-next-20260623-virtme #96 PREEMPT(lazy) [ 2030.242732] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 [ 2030.242743] Workqueue: ksmbd-io handle_ksmbd_work [ 2030.242763] Call Trace: [ 2030.242769] <TASK> [ 2030.242776] dump_stack_lvl+0xa2/0xd0 [ 2030.242794] print_address_description+0x77/0x200 [ 2030.242815] ? ksmbd_alloc_user+0x278/0x680 [ 2030.242831] print_report+0x58/0x70 [ 2030.242848] kasan_report+0x117/0x150 [ 2030.242869] ? ksmbd_alloc_user+0x278/0x680 [ 2030.242888] kasan_check_range+0x3c7/0x3f0 [ 2030.242908] ? ksmbd_alloc_user+0x278/0x680 [ 2030.242925] __asan_memcpy+0x29/0x70 [ 2030.242942] ksmbd_alloc_user+0x278/0x680 [ 2030.242960] ksmbd_login_user+0xc3/0x120 [ 2030.242978] ntlm_authenticate+0x5e6/0x1b00 [ 2030.243017] ? __pfx_ntlm_authenticate+0x10/0x10 [ 2030.243035] ? ksmbd_session_lookup+0x188/0x1d0 [ 2030.243054] ? __pfx_ksmbd_session_lookup+0x10/0x10 [ 2030.243090] ? __sanitizer_cov_trace_switch+0x7b/0x140 [ 2030.243108] smb2_sess_setup+0x1e4a/0x27b0 [ 2030.243126] ? copy_from_kernel_nofault+0x199/0x300 [ 2030.243156] ? __pfx_smb2_sess_setup+0x10/0x10 [ 2030.243173] ? get_smb2_cmd_val+0xe3/0x1c0 [ 2030.243208] handle_ksmbd_work+0x954/0x1280 [ 2030.243230] ? __pfx_handle_ksmbd_work+0x10/0x10 [ 2030.243249] ? process_scheduled_works+0xa07/0x1490 [ 2030.243270] ? process_scheduled_works+0xa07/0x1490 [ 2030.243291] process_scheduled_works+0xa70/0x1490 [ 2030.243320] ? __pfx_process_scheduled_works+0x10/0x10 [ 2030.243340] ? do_raw_spin_lock+0x130/0x300 [ 2030.243358] ? lock_is_held_type+0x7b/0x110 [ 2030.243388] worker_thread+0x932/0xe20 [ 2030.243415] kthread+0x38a/0x470 [ 2030.243431] ? __pfx_worker_thread+0x10/0x10 [ 2030.243451] ? __pfx_kthread+0x10/0x10 [ 2030.243467] ret_from_fork+0x484/0x910 [ 2030.243485] ? __pfx_ret_from_fork+0x10/0x10 [ 2030.243501] ? __switch_to+0xc77/0x12c0 [ 2030.243523] ? __pfx_kthread+0x10/0x10 [ 2030.243540] ret_from_fork_asm+0x1a/0x30 [ 2030.243564] </TASK> [ 2030.243570] [ 2030.290164] Allocated by task 19279: [ 2030.290911] kasan_save_track+0x3e/0x80 [ 2030.292179] __kasan_kmalloc+0x72/0x90 [ 2030.293217] __kvmalloc_node_noprof+0x3ff/0x6b0 [ 2030.294467] handle_generic_event+0x59b/0x750 [ 2030.295345] genl_family_rcv_msg_doit+0x238/0x340 [ 2030.296553] genl_rcv_msg+0x606/0x7b0 [ 2030.297129] netlink_rcv_skb+0x22b/0x4a0 [ 2030.298500] genl_rcv+0x2d/0x40 [ 2030.299273] netlink_unicast+0x7ba/0x930 [ 2030.300019] netlink_sendmsg+0x8c3/0xb00 [ 2030.301073] __sock_sendmsg+0xec/0x140 [ 2030.301579] __sys_sendto+0x357/0x470 [ 2030.302255] __x64_sys_sendto+0xe3/0x100 [ 2030.303425] do_syscall_64+0x135/0x460 [ 2030.304763] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 2030.305594] [ 2030.305819] The buggy address belongs to the object at ffff888121bb6640 [ 2030.305819] which belongs to the cache kmalloc-192 of size 192 [ 2030.309595] The buggy address ---truncated--- | ||||
| CVE-2026-90167 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: serialize oplock close with pending break ownership close may abort an in-flight oplock break while another breaker already holds an opinfo reference. Releasing pending_break wakes that waiter, but without serializing the close transition with bit acquisition it can become a new break owner through the test_and_set_bit() fast path. It can then overwrite OPLOCK_CLOSING with OPLOCK_ACK_WAIT and continue a break for a dying opinfo. Make OPLOCK_CLOSING terminal once the opinfo is removed from the inode list. Serialize that transition, pending_break acquisition, and OPLOCK_ACK_WAIT setup with an opinfo state lock. A breaker which loses the race releases its ownership and returns -ENOENT. Explicitly wake pending_break waiters during close so they can observe the terminal state. Also prevent ACK and timeout paths from replacing OPLOCK_CLOSING with OPLOCK_STATE_NONE. | ||||
| CVE-2026-90166 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb/server: fix null-ptr-deref in ksmbd_ipc_tree_connect_request() See the procedure below: ksmbd_tree_conn_connect ksmbd_share_config_get share->name = kstrdup() // fail if (!test_share_config_flag(share, KSMBD_SHARE_FLAG_PIPE)) // false // do not check `share->name` ksmbd_ipc_tree_connect_request strlen(share->name) // null-ptr-deref | ||||
| CVE-2026-90162 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: defer publishing granted locks to prevent UAF/double-free race In smb2_lock(), mid-batch granted locks are published to connection-wide (conn->lock_list) and file-wide (fp->lock_list) lists immediately upon vfs_lock_file() success, while also remaining tracked on the stack-local rollback_list. If a subsequent element in the same SMB2_LOCK request array fails validation or execution, the thread jumps to out: and walks rollback_list to undo previously granted locks. However, because the granted lock was already published to conn->lock_list, a concurrent UNLOCK request on the same connection can find the lock object and kfree() it before the rollback loop executes. When the granting thread subsequently walks rollback_list, it dereferences and frees the already-freed ksmbd_lock structure, resulting in a Use-After-Free and Double-Free (on both ksmbd_lock and struct file_lock). Fix this by deferring the publication of granted locks to conn->lock_list and fp->lock_list until after the entire array of lock elements has been processed without error. Mid-batch grants remain tracked exclusively on the request-local rollback_list until the whole batch succeeds, eliminating the race window. | ||||
| CVE-2026-90161 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: erofs: fix interlaced ztailpacking pclusters On-disk sizes of interlaced pclusters should be block-aligned, and ztailpacking interlaced pclusters should be invalid at all. Currently, mkfs.erofs won't generate any interlaced pcluster with ztailpacking enabled, so this doesn't affect any existing valid filesystems. However, crafted images can contain invalid interlaced ztailpacking pclusters, resulting in an out-of-bounds read from a kmap'd page and copying irrelevant kernel memory into userspace-visible page cache. | ||||
| CVE-2026-90156 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: safely discard unregistered deferred locks When vfs_lock_file() defers a lock, smb2_lock() puts its ksmbd_lock on rollback_list before allocating and registering the asynchronous work. If either operation fails, rollback assumes that smb_lock->conn is initialized and dereferences NULL. The deferred file_lock also remains linked into the VFS blocked-lock state while it is freed. Keep the lock off rollback_list until async setup succeeds. On setup failures, explicitly unblock and wake the deferred lock before freeing it and its ksmbd wrapper. | ||||
| CVE-2026-90155 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: detach blocked lock requests before freeing A file_lock retained by ksmbd for byte-range lock bookkeeping can still be part of the VFS blocked-request graph. In particular, the VFS can chain a new waiter below an already blocked request through flc_blocked_requests. The ksmbd_file reference count does not cover that graph. Both __ksmbd_close_fd() and the cross-request unlock path free these retained file_lock objects directly. If a dependent waiter is still attached, locks_release_private() hits BUG_ON(!list_empty(&flc->flc_blocked_requests)). The same lifetime mismatch can leave a freed ksmbd_lock reachable through its request-local llist. Detach the file_lock from the blocked-request graph before freeing it in the close, cross-request unlock, and rollback paths. locks_delete_block() also wakes requests chained below the object. Remove llist when a completed lock is published so a globally visible ksmbd_lock no longer points into the submitting worker's stack. | ||||
| CVE-2026-90154 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: scope session state changes to bound connections ksmbd_all_conn_set_status() treats every connection whose transient binding flag is set as belonging to the target SessionId. A logoff or session replacement can consequently move an unrelated connection to NEED_RECONNECT or NEED_SETUP. Pass the target session itself and select connections using either the connection-local session xarray or the session's permanent channel list. Use the same association test while waiting for requests to drain. Serialize session-wide status changes under request_lock and do not overwrite EXITING or RELEASING. Protect the shutdown transition with the same lock so a concurrent session update cannot revive a closing connection. | ||||
| CVE-2026-90152 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb/server: fix session leak in ksmbd_session_register() See the procedure below: smb2_sess_setup ksmbd_smb2_session_create __session_create atomic_set(&sess->refcnt, 2) hash_add(sessions_table, &sess->hlist, sess->id) ksmbd_session_register xa_store(&conn->sessions, sess->id, sess) // fail ksmbd_user_session_put atomic_dec(&sess->refcnt) // refcnt is 1, session is not freed Remove the session from sessions_table and drop its table reference if xa_store() fails. | ||||
| CVE-2026-90150 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pnfs/blocklayout: Fix device leaks on parse failure bl_parse_concat() and bl_parse_stripe() allocate a child device array and then parse each child in turn. If parsing a child fails, the failed child is not counted in nr_children and the parent may be left with a children array that bl_free_device() will not release when nr_children is zero. Release the failed child and the already parsed children before returning the error. Also make bl_free_device() release the child array whenever the children pointer is set, so that partially initialised concat or stripe devices are cleaned up correctly. bl_parse_scsi() can also fail after assigning d->bdev_file and dropping the file reference. Clear the pointer after fput() so that an outer cleanup path does not put it again. | ||||
| CVE-2026-90149 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4/flexfiles: fix NULL dereference for NFSv4.0 data servers flexfiles accepts NFSv4.0 data servers, but two NFSv4 code paths assume the data server client has a session. Unlike NFSv4.1+, an NFSv4.0 client has no session (clp->cl_session is NULL; it uses clp->cl_slot_tbl), so I/O to a v4.0 flexfiles DS oopses: - nfs4_init_ds_session() dereferences clp->cl_session->session_state while seeding the DS lease. It also only seeds cl_lease_time when NFS4_SESSION_INITING is set; without a session that never happens, so cl_lease_time stays 0 and nfs4_renew_state() busy-loops, requeuing every 5 seconds. Seed the lease whenever there is no session and return before touching session state. - ff_layout_async_handle_error_v4() dereferences clp->cl_session->fc_slot_table on every DS I/O error. Fall back to the v4.0 transport slot table (clp->cl_slot_tbl) when there is no session. | ||||
| CVE-2026-90148 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix incorrect argument passed to nfs4_delete_lease() in nfs4_add_lease() When nfs4_add_lease() races with a delegation return, it calls nfs4_delete_lease() to clean up. Previously, it passed priv, which can legitimately be NULL. Passing a NULL priv eventually leads to a NULL pointer dereference in generic_setlease(). | ||||