Export limit exceeded: 412903 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 412903 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 412903 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 412903 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (412903 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90433 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: oc-tiny: switch to managed controller allocation The controller is allocated with the non-managed spi_alloc_host() while the interrupt is registered with devm_request_irq(). During removal, spi_bitbang_stop() only unregisters the controller; the subsequent spi_controller_put() then frees the controller together with its embedded driver-private devdata, which is the IRQ handler's dev_id. The devm_request_irq() release action (free_irq()), which drains the handler, does not run until after .remove() returns. A late or latched interrupt can therefore reach tiny_spi_irq() and dereference already-freed memory (e.g. hw->base). Switch to devm_spi_alloc_host() so that the devres LIFO order releases the controller only after free_irq() has drained the handler, and drop the now-redundant spi_controller_put() from .remove(). The probe error path is simplified to direct returns. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-90427 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Don't fall back to a freed smmu after devm_krealloc() __tegra241_cmdqv_probe() uses devm_krealloc() to grow @smmu into the larger tegra241_cmdqv, which frees the original @smmu once it relocates. A failure after that returned NULL, and the caller then dereferenced the freed @smmu on its fallback path. Return an int and take @smmu by reference instead, then update *smmu to the reallocated pointer after devm_krealloc() succeeds, so the caller and its fallback path both use the live @smmu rather than the freed original. | ||||
| CVE-2026-90424 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Fix VINTF0 leak on the init-failure path tegra241_cmdqv_init_structures() allocates VINTF0 with kzalloc_obj(), inits it, and preallocates its logical VCMDQs. Two of its error paths leak. When tegra241_cmdqv_init_vintf() fails it returns before VINTF0 reaches the cmdqv->vintfs[] array, so the devres unwind on probe failure cannot reach it; free it directly there. A later VCMDQ preallocation failure instead leaves VINTF0 published, and so this time the unwind does reach tegra241_cmdqv_remove_vintf(), which then frees it from vintf->hyp_own. But tegra241_vintf_hw_init() sets that flag only afterward, from a HW read-back, so the still-uninited VINTF0 reads as guest-owned and leaks, with mutex_destroy() and ida_destroy() run on fields it never set up. Decide ownership from vintf->idx instead, the index assigned when its id is allocated: idx 0 is the kernel-owned VINTF0, while idx >= 1 marks a guest VINTF. So the in-kernel free decision in tegra241_cmdqv_remove_vintf() and tegra241_vintf_free_lvcmdq() now keys on idx too, and hyp_own stays a pure HW-readback state. | ||||
| CVE-2026-90422 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: pllfh: Fix IO remapping leak in register_pllfhs error path When mtk_clk_register_pllfhs function fails to register a PLL, it unregisters all PLLs and cleans up itself in its error path before returning, so the function callers don't need to do it. But contrary to mtk_clk_unregister_pllfhs function, that does almost the same sequence, it does not free the IO memory mapped on fhctl node, leading to a leak. Fix this leak by factorizing the cleanup sequence in a new private function and use it both mtk_clk_register_pllfhs and mtk_clk_unregister_pllfhs functions. Also, change the loop index start value to avoid the -1 operation on index at each loop. | ||||
| CVE-2026-90421 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: PCI: Fix UAF when probe runs concurrent to dyn ID removal Dynamic IDs are only guaranteed to be valid when dynids.lock is held, as remove_id_store() can free the node. Thus, make a copy in pci_match_device(). Also, clarify that the id parameter is only valid during probe. | ||||
| CVE-2026-90417 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/cxgb4: Fix dereg_skb leak and double free in write_tpt_entry() When the device is in the fatal error state, write_tpt_entry() returns -EIO before handing the caller's preallocated skb to the transmit path; its allocation-failure returns do the same. c4iw_dereg_mr() ignores the error and frees mhp, leaking mhp->dereg_skb. c4iw_get_dma_mr() instead frees the skb a second time after dereg_mem() already consumed it, a double free. Make write_tpt_entry() the sole owner of a non-NULL skb, freeing it on every return preceding handoff to c4iw_ofld_send(): fatal error, tpt and stag allocation failure. c4iw_ofld_send() consumes the skb on success and error alike, so drop the redundant kfree_skb() in c4iw_get_dma_mr() after dereg_mem(). | ||||
| CVE-2026-90409 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Add vm_bind region with kbo range overlap check When a VM is created, caller has to specify the range of the address space carve-out set aside for mapping kernel BO's. That means vm_bind mappings of UM-exposed BO's should not intersect with that region, but at the moment we're not checking this. At first, I thought of giving these values to drm_gpuvm_init() through its reserve_{offset, range} arguments, but it turns out that is meant for VM address spans that are not managed through the usual drm_gpuvm split/merge circuit, so storing the end of the user VA range at VM creation time and doing a quick check in the vm_bind ioctl path was the simplest workaround. The new check also makes sure vm_bind range doesn't overflow the size of a 64-bit unsigned integer. That was already being done further down the call stack inside drm_gpuvm_sm_map -> drm_gpuvm_range_valid, but it's best to fail early in the driver before GPUVM functions are invoked so that we won't waste time allocating vm_bind context resources. | ||||
| CVE-2026-90408 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix overreads in ath12k_wmi_process_csa_switch_count_event() There is no policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT, so the parse infrastructure does not enforce a minimum length for the event struct. Additionally, the num_vdevs field is taken directly from firmware and used as a loop bound over the vdev_ids array without checking that it fits within the TLV payload. Either condition can cause an out-of-bounds read. Add a TLV policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT so the parse infrastructure enforces a minimum length for the fixed-size event struct. Add a helper ath12k_wmi_tlv_data_len() to recover the payload length of a parsed TLV from the header preceding its data pointer. Use it in ath12k_wmi_process_csa_switch_count_event() to bound num_vdevs before the loop. Compile tested only. | ||||
| CVE-2026-90399 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix stride mismatch in mac_phy_caps_parse() Currently, in ath12k_wmi_mac_phy_caps_parse(), kzalloc() sizes the mac_phy_caps buffer as tot_phy_id * len, where len is clamped to min(firmware_len, sizeof(struct ath12k_wmi_mac_phy_caps_params)). The subsequent memcpy() destination advances by sizeof(full struct) per slot via C pointer arithmetic, not by the clamped len. When firmware sends short TLVs, the second and later slots are written past the end of the allocation. The reader in ath12k_pull_mac_phy_cap_svc_ready_ext() also indexes the buffer with full-struct pointer arithmetic, so the allocation must match that stride. Fix by using kzalloc_objs(), which derives the element size from the pointer type, making allocation size and pointer stride provably consistent regardless of what len the firmware provides. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3 | ||||
| CVE-2026-90398 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix stride mismatch in mac_phy_caps_parse() Currently, in ath11k_wmi_tlv_mac_phy_caps_parse(), kcalloc() sizes the mac_phy_caps buffer as tot_phy_id * len, where len is clamped to min(firmware_len, sizeof(struct wmi_mac_phy_capabilities)). The subsequent memcpy() destination advances by sizeof(full struct) per slot via C pointer arithmetic, not by the clamped len. When firmware sends short TLVs, the second and later slots are written past the end of the allocation. The reader in ath11k_pull_mac_phy_cap_svc_ready_ext() also indexes the buffer with full-struct pointer arithmetic, so the allocation must match that stride. Fix by using kzalloc_objs(), which derives the element size from the pointer type, making allocation size and pointer stride provably consistent regardless of what len the firmware provides. Compile tested only. | ||||
| CVE-2026-90397 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: scm: Fix NULL dereference in IRQ handler before __scm is published In qcom_scm_probe(), devm_request_threaded_irq() is called before smp_store_release(&__scm, scm). Two paths can dereference __scm before it is published, both causing a NULL pointer dereference. The IRQ handler receives scm via its data argument but passes only wq_ctx to qcom_scm_waitq_wakeup() and qcom_scm_get_completion(), which then dereference __scm directly. Thread scm through both functions so the IRQ handler path never touches __scm. Non-atomic SMC calls made during probe (e.g. from qcom_tzmem_init via qcom_scm_shm_bridge_enable) can return WAITQ_SLEEP, causing qcom_scm_wait_for_wq_completion() to run before __scm is published and dereference it. Add platform_set_drvdata(pdev, scm) early in probe and change qcom_scm_wait_for_wq_completion() to take the device pointer and use dev_get_drvdata() to reach scm, removing any dependency on __scm. | ||||
| CVE-2026-90385 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1: create serial pool adding rdev to array with serialize_policy=1 The following bug has been observed with kernel 7.1.3 after adding a new rdev to an existing RAID1 array with serialize_policy enabled: Oops: 0002 [#1] CPU: 0 UID: 0 PID: 19639 Comm: ext4lazyinit Not tainted 7.1.3-1-default RIP: _raw_spin_lock_irqsave+0x27/0x50 CR2: 0000000000004960 Call Trace: wait_for_serialization+0xb9/0x260 [raid1] raid1_make_request+0x762/0xaff [raid1] md_handle_request+0x1c9/0x2e0 [md_mod] The raid1.c code calls wait_for_serialization() if the MD_SERIALIZE_POLICY is set, and wait_for_serialization assumes that rdev->serial is initialized. Normally this will be the case for arrays that have the serialize_policy sysfs attribute set to 1. But when a new rdev is added to an existing array in bind_rdev_to_array(), the condition at mddev_create_serial_pool() causes creation of rdev->serial to be skipped. Fix it. | ||||
| CVE-2026-90383 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: misc: sgi-gru: remove interrupt-context page-table walks The GRU TLB miss handler walks a process's page tables without holding page-table locks or a reference to the mapped page. It also uses a kernel page-table accessor on user page tables and supports only PMD-level large mappings on x86-64. Remove the direct walker. Send interrupt faults directly to user polling mode so the existing call-OS fallback retries them in process context. Remove the mmap-lock failure statistic that can no longer be incremented. | ||||
| CVE-2026-90375 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: fix non-AQL packet accounting for MLO stations __mt76_tx_queue_skb() overrides the wcid passed by the driver with sta->drv_priv, so the wcid might incorrectly be changed after TX, causing wcid->non_aql_packets to be counted on the wrong wcid. For example, on the AP side, if a station's setup link is the 5G link and the station uses 2G to transmit a frame, the value of non_aql_packets is increased on the 5G wcid but decreased on the 2G wcid. Once the inflated counter exceeds MT_MAX_NON_AQL_PKT, the TX scheduler permanently refuses to service the station. Drop the reassignment and account on the wcid used for transmission. This also records the actual wcid in the queue entry. | ||||
| CVE-2026-90374 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: validate RX band_idx before dereferencing phys[] band_idx comes from a 2-bit descriptor field (0-3) and was used directly to index dev->mt76.phys[] (size __MT_MAX_BAND == 3) and dereference the result. A corrupt or reserved descriptor value could index out of bounds or hit a NULL phy on parts with fewer bands. Reject invalid band indices, mirroring mt7996_rx_get_wcid(). | ||||
| CVE-2026-90368 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: unwind state on add_interface failure When mt76_wcid_alloc() fails, mt7915_add_interface() returned without clearing the vif_mask/omac_mask bits it had already set, without removing the firmware dev info added earlier, and without clearing a monitor_vif pointer to the vif mac80211 is about to free. mac80211 does not call remove_interface() for a failed add, so the indices and firmware dev entry leaked permanently and testmode could dereference the stale monitor_vif. Add a proper error unwind. | ||||
| CVE-2026-90367 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: hold dev->mt76.mutex while disabling tx worker in SER mt7996_mac_reset_work() parked the tx worker and disabled the RX/TX NAPIs before taking dev->mt76.mutex. mt76_worker_disable()/_enable() are plain kthread park/unpark, not refcounted, and __mt76_set_channel() toggles the same worker and the MT76_RESET bit under the mutex. An L1 SER racing a channel switch could therefore have the worker unparked and MT76_RESET cleared while the reset path resets the DMA rings, corrupting descriptors or tokens. Take the mutex before disabling the worker, as mt7915 does. | ||||
| CVE-2026-90365 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: cancel reset and rc work on device unregister Both drivers cancelled dump_work on unregister but left reset_work and rc_work to be flushed only by destroy_workqueue() in mt76_free_device(), which runs after the hw is unregistered and the hardware stopped. A reset_work that fires in that window calls ieee80211_restart_hw() and re-arms mac_work on an unregistered hw, and rc_work touches station state being torn down. Cancel both up front, alongside dump_work. | ||||
| CVE-2026-90363 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: don't tear down KMS twice when KMS init fails When priv->kms_init() (mdp4_kms_init() / mdp5_kms_init()) fails partway through, both display drivers already tear their KMS state down via mdp4_destroy() / mdp5_kms_destroy() before returning the error. The common error path in msm_drm_init() then runs msm_drm_uninit() -> msm_drm_kms_uninit(), which tries to destroy the very same KMS a second time, which causes a use-after-free crash. Bring MDP4/MDP5 in line with the DPU driver whose dpu_kms_init() doesn't perform error cleanup on the failure. Let the common path own the cleanup, instead of freeing the KMS from their error paths. The crash trace for the reference: __lock_acquire from lock_acquire (kernel/locking/lockdep.c:5906 kernel/locking/lockdep.c:5863) lock_acquire from touch_wq_lockdep_map (kernel/workqueue.c:4094 (discriminator 1)) touch_wq_lockdep_map from __flush_workqueue (kernel/workqueue.c:4136) __flush_workqueue from msm_drm_kms_uninit (drivers/gpu/drm/msm/msm_kms.c:243 (discriminator 33)) msm_drm_kms_uninit from msm_drm_uninit (drivers/gpu/drm/msm/msm_drv.c:93) msm_drm_uninit from msm_drm_init (drivers/gpu/drm/msm/msm_drv.c:184) msm_drm_init from try_to_bring_up_aggregate_device (drivers/base/component.c:249 drivers/base/component.c:227) try_to_bring_up_aggregate_device from __component_add (drivers/base/component.c:269 drivers/base/component.c:748) __component_add from dsi_host_attach (drivers/gpu/drm/msm/dsi/dsi_host.c:1739) dsi_host_attach from mipi_dsi_attach (drivers/gpu/drm/drm_mipi_dsi.c:383) mipi_dsi_attach from sharp_nt_panel_probe (drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c:247) Patchwork: https://patchwork.freedesktop.org/patch/742068/ | ||||
| CVE-2026-90359 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject >8 byte return values on return-reading trampoline paths btf_distill_func_proto() builds the function model used for the fentry/fexit/fmod_ret/fsession trampolines and struct_ops. It has accepted a 16-byte __int128 return value since the trampoline was introduced: __get_type_size() returns the integer's type size, and the return-type check only rejected ret < 0. But the BPF trampoline preserves only 8 bytes of the return value (RAX on x86, i.e. R0). For an attach type that reads the target's return value the second half (RDX / R3) is neither saved nor restored, so a program attached to a function returning a 16-byte value corrupts the value seen by the real caller and itself observes only half of it. struct_ops trampolines have the same limitation. This affects the attach types that read the target's return value: fexit, fmod_ret and fsession (plus the _multi variants of fexit and fsession), and struct_ops. fentry/fentry_multi run before the target returns and are unaffected. Reject a >8 byte return value for these attach types in bpf_check_attach_target() and bpf_check_attach_btf_id_multi(), and for struct_ops in bpf_struct_ops_desc_init(). | ||||