Export limit exceeded: 11458 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (11458 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68277 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/dp/mst: fix OOB reads on 2-byte fields in sideband reply parsers Three sideband reply parsers read 16-bit fields as: val = (raw->msg[idx] << 8) | (raw->msg[idx+1]); and check bounds only after the fact. When idx == raw->curlen, raw->msg[idx+1] reads one byte past the received message data into the following struct fields (curchunk_len, curchunk_idx, curlen). Affected functions: - drm_dp_sideband_parse_enum_path_resources_ack() full_payload_bw_number and avail_payload_bw_number fields - drm_dp_sideband_parse_allocate_payload_ack() allocated_pbn field - drm_dp_sideband_parse_query_payload_ack() allocated_pbn field Fix by using a single combined check (idx + 2 > curlen) before each 2-byte read. Since the check is strictly tighter than idx > curlen, no separate step is needed. [added fixes tag] | ||||
| CVE-2026-68255 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: bound EDID block reads to the response buffer virtio_get_edid_block() validates the read offset only against the device-supplied resp->size field, never against the fixed-size resp->edid array. The EDID block index is driven by the device-supplied extension count, so a malicious virtio-gpu backend can advertise a large size together with a high block count and read far past the array into adjacent kernel memory, which is then surfaced in the parsed EDID (an out-of-bounds read / info leak). Also reject any read whose end exceeds the size of the edid array. Conforming EDID responses stay within the array and are unaffected. | ||||
| CVE-2026-68100 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate num_subauth when copying ACE in set_ntacl_dacl set_ntacl_dacl() copies each ACE from the attacker-controlled stored security descriptor verbatim into the response DACL without checking sid.num_subauth. The ACE bytes (including an unchecked num_subauth) originate from an authenticated SMB2_SET_INFO(SecInfo=DACL) that is stored raw via ksmbd_vfs_set_sd_xattr(); parse_dacl() rejects a bad ACE with `break` rather than an error, so parse_sec_desc() still returns success and the malformed SD reaches the xattr intact. On a subsequent SMB2_QUERY_INFO(SecInfo=DACL) for an inode carrying a POSIX access ACL, build_sec_desc() -> set_ntacl_dacl() -> set_posix_acl_entries_dacl() walks the copied ACEs and reads ntace->sid.sub_auth[ntace->sid.num_subauth - 1] with num_subauth taken straight from the stored SD. Since sub_auth[] is fixed at SID_MAX_SUB_AUTHORITIES (15), a crafted num_subauth (e.g. 255) drives an out-of-bounds heap read of ~1 KB with an offset fully controlled by an authenticated client. The sibling functions already gate this field: parse_dacl() -- num_subauth == 0 || > SID_MAX_SUB_AUTHORITIES parse_sid() -- num_subauth > SID_MAX_SUB_AUTHORITIES smb_copy_sid() -- min_t(u8, num_subauth, SID_MAX_SUB_AUTHORITIES) set_ntacl_dacl() is the lone inconsistent path that omits the check. Add the same num_subauth validation in set_ntacl_dacl() before copying the ACE, matching the gate already enforced by parse_dacl(). | ||||
| CVE-2026-68099 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: restore DACL size on check_add_overflow() to avoid malformed ACL check_add_overflow() unconditionally writes the truncated sum into *d even on overflow, per its contract in include/linux/overflow.h. The four check_add_overflow() guards in set_posix_acl_entries_dacl() and set_ntacl_dacl() break out of the ACE-building loops on overflow, but the truncated *size is then consumed downstream at the end of set_ntacl_dacl(): pndacl->size = cpu_to_le16(le16_to_cpu(pndacl->size) + size); This produces an on-wire NT ACL whose pndacl->size under-reports the bytes actually written by the preceding fill_ace_for_sid()/memcpy() calls, yielding a malformed ACL that can trigger out-of-bounds reads when re-parsed by clients or ksmbd itself. Restore *size to its pre-addition value on each overflow branch (via `*size -= ace_sz` / `size -= nt_ace_size`) so that after the break, *size once again holds the cumulative size of the successfully-written ACEs. The committed ACL is then truncated-but-self-consistent rather than malformed. The ksmbd DACL builders are the only check_add_overflow() sites found where an overflow path breaks out of a loop and the destination value is consumed afterward. The other nearby break-style cases either return -EINVAL on overflow (transport_ipc.c) or break without consuming the overflowed destination value afterward (buildid.c). | ||||
| CVE-2026-64272 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: mms114 - fix touch indexing for MMS134S and MMS136 The MMS134S and MMS136 touch controllers have an event size of 6 bytes rather than 8 bytes. When __mms114_read_reg() reads the touch data packet from the device into the touch buffer, the events are packed tightly at 6-byte intervals. However, the driver iterates through the events using standard C array indexing (touch[index]), where each element is sizeof(struct mms114_touch) (8 bytes) apart. As a result, any touch events beyond the first one are read from incorrect offsets and parsed improperly. Fix this by explicitly calculating the byte offset for each touch event based on the device's specific event size. | ||||
| CVE-2026-64269 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs-srv: Bound RDMA-Write length to chunk size in rdma_write_sg When the server answers an RTRS READ, rdma_write_sg() builds the source scatter/gather entry for the IB_WR_RDMA_WRITE that returns data to the peer. Its length is taken directly from the wire descriptor: plist->length = le32_to_cpu(id->rd_msg->desc[0].len); rd_msg points into the chunk buffer that the remote peer filled via RDMA-WRITE-WITH-IMM (rtrs_srv_rdma_done() -> process_io_req() -> process_read()), so desc[0].len is attacker-controlled and, before this change, was only rejected when zero. The source address is the fixed chunk start (dma_addr[msg_id]) and the source lkey is the PD-wide local_dma_lkey, which is not tied to the chunk's MR mapping, so the verbs layer does not constrain the transfer length to max_chunk_size. msg_id and off are bounded against queue_depth and max_chunk_size in rtrs_srv_rdma_done(), but desc[0].len is a separate field that was not checked against the chunk size. A peer that advertises desc[0].len larger than max_chunk_size can make the posted RDMA write read past the chunk's mapped region. The resulting behaviour depends on the IOMMU configuration: with no IOMMU or in passthrough mode the read may extend into memory adjacent to the chunk and be returned to the peer, which can disclose host memory; with a translating IOMMU the out-of-range access is expected to fault and abort the connection. In either case the transfer exceeds what the protocol permits and is driven by a remote peer. Reject a descriptor length above max_chunk_size, mirroring the existing off >= max_chunk_size bound in rtrs_srv_rdma_done(). Legitimate clients do not exceed it: the client sets desc[0].len to its MR length, which is capped at the negotiated max_io_size (max_chunk_size - MAX_HDR_SIZE). | ||||
| CVE-2026-74679 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: Use unsigned int for ndp_index The variable ndp_index is declared as a signed integer, but it stores the return value of get_ncm(), which is unsigned. A malicious host can supply a large offset that overflows the signed ndp_index, making it negative. Because ndp_index is compared against unsigned bounds, this negative value bypasses sanity checks and leads to an out-of-bounds read when calculating the address of the NDP block (ntb_ptr + ndp_index). Fix this by changing ndp_index to unsigned int to ensure consistent unsigned comparisons throughout the function. | ||||
| CVE-2026-72156 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header() mpf_ops_parse_header() reads header_size from the bitstream at MPF_HEADER_SIZE_OFFSET (24). When header_size is zero, the expression *(buf + header_size - 1) reads one byte before the buffer start. Since initial_header_size is set to 71 in mpf_ops, the fpga-mgr core guarantees the buffer is large enough to reach MPF_HEADER_SIZE_OFFSET. The only real gap is the zero header_size case, which cannot be resolved by providing a larger buffer, so return -EINVAL. | ||||
| CVE-2026-72209 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: validate attribute values on lookup ntfs_attr_find() and ntfs_external_attr_find() check that generic resident attribute values fit in their attribute records and that fixed-size resident values are large enough. For variable-length resident formats, however, the fixed part is not enough: embedded length fields can still point callers past the resident value. A crafted image can set a small resident $FILE_NAME value_length while leaving file_name_length large. Callers then trust file_name_length and read past the resident value when converting or comparing the name. This was reproduced with a crafted image under KASAN as a slab-out-of-bounds read from the kmalloc-1k MFT record copy. The stack included ntfs_lookup(), ntfs_iget(), ntfs_read_locked_inode(), ntfs_attr_name_get(), ntfs_ucstonls(), and utf16s_to_utf8s(). Add a shared attribute value validator and use it before a lookup path can return an attribute, including the AT_UNUSED enumeration case where callers inspect returned attributes directly. The helper validates resident value bounds, minimum resident value sizes, variable-length $FILE_NAME fields, and non-resident mapping-pairs metadata that was previously checked separately in both lookup paths. This also preserves the intended resident @val matching semantics in the external attribute lookup path. The old duplicated validation block overwrote the actual resident value length with the type-specific minimum length before comparing @val, so variable-length resident values could fail to match even when the bytes were identical. Keep the comparison on the actual value length, and make ntfs_attrlist_entry_add() compare resident attributes with lowest_vcn zero instead of reading the non-resident union member after a successful resident match. Reject non-resident $FILE_NAME records too: the format requires $FILE_NAME to be resident and callers treat returned records as resident. | ||||
| CVE-2026-72210 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: fix off-by-one in mapping pairs decoding bounds checks In ntfs_mapping_pairs_decompress(), attr_end points one byte past the end of the attribute record: attr_end = (u8 *)attr + le32_to_cpu(attr->length); The two bounds checks validating that mapping pair data bytes fit within the attribute use strict greater-than (>), which allows a one-byte out-of-bounds read when the data extends exactly to attr_end: b = *buf & 0xf; if (b) { if (unlikely(buf + b > attr_end)) // off-by-one goto io_error; for (deltaxcn = (s8)buf[b--]; b; b--) deltaxcn = (deltaxcn << 8) + buf[b]; } When buf + b == attr_end, the check evaluates to false and buf[b] reads one byte past the valid attribute boundary. The same pattern appears in the LCN delta bytes check. Fix both checks to use >= so that buf[b] at exactly attr_end is correctly rejected as out of bounds. | ||||
| CVE-2026-72227 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: mcast: avoid OOB read of num_dests header Before the access to struct batadv_tvlv_mcast_tracker's num_dests, it is attempted to check whether enough space is actually in the network header. But instead of using offsetofend() to check for the whole size (2) which must be accessible, offsetof() of is called. The latter is always returning 0. The comparison with the network header length will always return that enough data is available - even when only 1 or 0 bytes are accessible. Instead of using offsetofend(), use the more common check for the whole header. | ||||
| CVE-2026-72241 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: leds: uleds: Fix potential buffer overread The name string supplied by userspace is not guaranteed to be null-terminated, so using strchr() on it might result in a buffer overread. The same thing will happen when said string is used by the LED class device. Fix this by using strnchr() instead and explicitly check that the name string is properly null-terminated. | ||||
| CVE-2026-72417 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: Validate iph->ihl in nf_flow_ip4_tunnel_proto() Add sanity check for iph->ihl field in nf_flow_ip4_tunnel_proto() before using it to compute the header size, avoiding out-of-bounds access with malformed IP headers. While at it, use iph->protocol instead of the hardcoded IPPROTO_IPIP constant when setting ctx->tun.proto and reference ctx->tun.hdr_size when updating ctx->offset. | ||||
| CVE-2026-72480 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: xilinx-ams: fix out-of-bounds channel lookup in event handling ams_event_to_channel() may return a pointer past the end of dev->channels when no matching scan_index is found. This can lead to invalid memory access in ams_handle_event(). Add a bounds check in ams_event_to_channel() and return NULL when no channel is found. Also guard the caller to safely handle this case. | ||||
| CVE-2026-74457 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: add bounds check for USB channel index The channel control index ctrl_idx is derived from rx->len which comes directly from a device USB payload. The mask 0x0f allows values 0-15, but the array size of usb_if->dev[] is only 2. Values 2-15 cause heap out-of-bounds read, eventually causing kernel panic in the IRQ context. Add bounds checking for ctrl_idx before the array access in both pcan_usb_pro_handle_canmsg() and pcan_usb_pro_handle_error(). | ||||
| CVE-2026-74295 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: hdac_hdmi: Validate written enum value hdac_hdmi_set_pin_port_mux() uses the written enum value to index the texts array before calling snd_soc_dapm_put_enum_double(), which validates that the value is within the enum item range. An out-of-range value can therefore make the driver read past the texts array before the helper rejects the write. Move the lookup after the helper has accepted the value. | ||||
| CVE-2026-74346 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix OOB read during CQ MR registration Sashiko pointed out an unrelated bug during a previous patch: https://sashiko.dev/#/patchset/20260512183852.614045-1-jmoroni%40google.com This change fixes the bug by eliminating the cqmr->split field which was not being set properly and instead just checks the CQ resize feature flag directly. The cqmr->split field essentially tracks whether IRDMA_FEATURE_CQ_RESIZE is set, but it was not being set until CQ creation time, which is _after_ CQ memory registration (the only other place where it is referenced). As a result, it would always be false during MR registration and would therefore cause irdma_handle_q_mem to populate cqmr->shadow even for GEN_2 HW and beyond: cqmr->shadow = (dma_addr_t)arr[req->cq_pages]; The issue is that for GEN_2 and beyond, req->cq_pages may be exactly equal to iwmr->page_cnt and therefore equal to the size of arr, which would cause an OOB read by one. | ||||
| CVE-2026-74361 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nvme: fix FDP fdpcidx bounds check The fdpcidx bounds check sets n = NUMFDPC + 1 but used > instead of >=, incorrectly accepting fdp_idx when it equals n (i.e. NUMFDPC + 1). | ||||
| CVE-2026-74399 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: evm: terminate and bound the evm_xattrs read buffer evm_read_xattrs() allocates size + 1 bytes, fills them from the list of enabled xattrs, and then passes strlen(temp) to simple_read_from_buffer(). When no configured xattrs are enabled, the fill loop stores nothing and temp[0] remains uninitialized, so strlen() reads beyond initialized memory. Explicitly terminate the buffer after allocation, use snprintf() for each formatted line, and pass the accumulated length, without risk of truncation, to simple_read_from_buffer(). | ||||
| CVE-2026-74419 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Adjust size for copy_to_user() The amount of data returned to user space should be limited by the buffer size provided by the application. If the buffer is smaller than the data size, return only the portion that fits instead of failing. | ||||