Export limit exceeded: 412849 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 412849 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (412849 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74449 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix divide-by-zero in calculate_mcache_setting on zero viewport If a plane reaches calculate_mcache_setting with a zero-area viewport, calculate_mcache_setting exits early with num_mcaches == 0 and mvmpg_width/height == 0. This will cause a divide-by-zero panic and can also cause an underflow on num_mcaches. Fix this by changing calculate_mcache_setting to bool and adding guards after each calculate_mcache_row_bytes call. If num_mcaches or mvmpg_width/height is zero, return a false. Callers will propagate the failure as a rejected mode, which prevents the panic. (cherry picked from commit 29c0f7c655f47bcbd575ff75e58480df6ec3c9da) | ||||
| CVE-2026-74407 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: cancel SSR work items during PCI shutdown A reboot can crash the kernel if it overlaps with WLAN firmware crash recovery (SSR). The crash is a NULL pointer dereference in the MHI teardown path while freeing DMA-backed MHI contexts. Simplified trace: dma_free_attrs mhi_deinit_dev_ctxt [mhi] ath11k_pci_power_down [ath11k_pci] ath11k_pci_shutdown [ath11k_pci] device_shutdown kernel_restart On the host side, SSR is driven by the MHI RDDM callback, which queues reset_work to perform device recovery. reset_work power-cycles the device by calling ath11k_hif_power_down() followed by ath11k_hif_power_up(). The power-down phase deinitializes MHI and frees DMA resources. Shutdown/reboot runs fully asynchronously with this RDDM-driven SSR recovery flow. As a result, the shutdown path (ath11k_pci_shutdown() -> ath11k_pci_power_down()) can race with the SSR recovery sequence. Fix this by canceling SSR-related work items during PCI shutdown, marking the device as unregistering, and serializing the RDDM callback path that checks and queues reset_work. This ensures that no new SSR recovery work can be queued once teardown has started, and that any in-flight recovery work is fully synchronized before device power-down, preventing MHI teardown and DMA resource freeing from running more than once. Note: This issue only affects PCI/MHI-based devices. AHB-based ath11k devices do not queue reset_work in normal SSR flows. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04866.5-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1 | ||||
| CVE-2026-74405 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: OPP: Fix race between OPP addition and lookup A race exists between dev_pm_opp_add_dynamic() and dev_pm_opp_find_freq_exact(): CPU0 (add) CPU1 (lookup) ------------------------------- ------------------------------ _opp_add() mutex_lock() list_add(&new_opp->node, head) mutex_unlock() _opp_table_find_key() mutex_lock() dev_pm_opp_get(opp) kref_get() mutex_unlock() kref_init(&new_opp->kref) dev_pm_opp_put() kref_put_mutex() The newly added OPP is inserted into the list before its kref is initialized. A concurrent lookup can find this OPP and increment its reference count while it is still uninitialized, leading to refcount corruption and a potential premature free. Fix this by initializing ->kref and ->opp_table before making the OPP visible via list_add(). This ensures any concurrent lookup observes a fully initialized object. [ Viresh: Updated commit log ] | ||||
| CVE-2026-74389 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix log flood after cmd_mbox failure hns_roce_cmd_mbox() is the command interface between driver and hardware. When hardware is abnormal, the unlimited error printings after hns_roce_cmd_mbox() failure will cause log flood and even system crash. Replace ibdev_err() and ibdev_warn() with their ratelimited versions in the error handling path after hns_roce_cmd_mbox() (and its wrappers hns_roce_create_hw_ctx/hns_roce_destroy_hw_ctx) fails. | ||||
| CVE-2026-74388 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: oss: Fix UAF at handling events with embedded SysEx data The OSS sequencer processes the input MIDI bytes into a sequencer event to be dispatched later (in snd_seq_oss_midi_putc() called from snd_seq_oss_process_event()). When it's a SysEx data, the event record contains data.ext.ptr pointer to the original SysEx bytes, and the referred data is copied into the pool afterwards at dispatching. The problem is that, if the sequencer port gets closed concurrently before the dispatch, the OSS sequencer core also releases the resources (in snd_seq_oss_midi_check_exit_port()), while the pending event may hold a stale pointer, eventually leading to a UAF at a later dispatch. Fortunately, there is already a refcounting mechanism (snd_use_lock_t) for the OSS MIDI device access, and for addressing the issue above, we just need to extend the refcount until the event gets dispatched. This patch extends snd_seq_oss_process_event() to give back the refcount object, which is in turn released after calling the sequencer dispatcher with the given event in the caller side. According to the original report, KASAN report as below: KASAN slab-use-after-free in snd_seq_event_dup+0x40c/0x470 RIP: 0033:0x7f2cb66a6340 Read of size 6 Call trace: dump_stack_lvl+0x73/0xb0 (?:?) print_report+0xd1/0x650 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x1a7/0x340 (?:?) kasan_complete_mode_report_info+0x64/0x200 (?:?) kasan_report+0xf7/0x130 (?:?) snd_seq_event_dup+0x40c/0x470 (?:?) kasan_check_range+0x10c/0x1c0 (?:?) __asan_memcpy+0x27/0x70 (?:?) snd_seq_event_dup+0x9/0x470 (?:?) snd_seq_client_enqueue_event+0x139/0x240 (?:?) _raw_spin_unlock_irqrestore+0x4b/0x60 (?:?) snd_seq_kernel_client_enqueue+0x102/0x120 (?:?) snd_seq_oss_write+0x416/0x4e0 (?:?) apparmor_file_permission+0x20/0x30 (?:?) odev_write+0x3b/0x60 (?:?) vfs_write+0x1ce/0x850 (?:?) lock_release+0xc8/0x2a0 (?:?) __kasan_check_write+0x18/0x20 (?:?) __mutex_unlock_slowpath+0x129/0x510 (?:?) ksys_write+0xe1/0x180 (?:?) mutex_unlock+0x16/0x20 (?:?) odev_ioctl+0x65/0xc0 (?:?) __x64_sys_write+0x46/0x60 (?:?) x64_sys_call+0x7d/0x20d0 (?:?) do_syscall_64+0xc1/0x360 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) | ||||
| CVE-2026-74386 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: fix page fragment cache leak in error path In nvmet_tcp_alloc_queue(), when a connection is closed during the allocation process (e.g., nvmet_tcp_set_queue_sock() returns -ENOTCONN), the error handling jumps to out_destroy_sq and then to out_ida_remove without draining the page fragment cache. Although nvmet_tcp_free_cmd() is called in some error paths to release individual page fragments, the underlying page cache reference held by queue->pf_cache is never released. The first allocation using pf_cache is the call to nvmet_tcp_alloc_cmd() for queue->connect, which happens after ida_alloc() returns successfully. This results in a page leak each time a connection fails during allocation, which could lead to memory exhaustion over time if connections are repeatedly opened and closed. Fix this by calling page_frag_cache_drain() before freeing the queue structure in the out_ida_remove label. | ||||
| CVE-2026-74385 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: check return value of nvmet_tcp_set_queue_sock The return value of nvmet_tcp_set_queue_sock() is currently ignored in nvmet_tcp_tls_handshake_done(). If it fails (e.g., due to the socket not being in TCP_ESTABLISHED state), the socket callbacks will not be properly set, leading to queue and socket leakage. Fix this by capturing the return value and calling nvmet_tcp_schedule_release_queue() on failure to ensure proper cleanup. | ||||
| CVE-2026-74375 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1,raid10: fix deadlock in read error recovery path raid1d and raid10d may resubmit a split md cloned bio while handling a read error. In this case, resubmitting the bio can lead to a deadlock if the array is suspended before md_handle_request() acquires an active_io reference via percpu_ref_tryget_live(). Since the cloned bio already holds an active_io reference, trying to acquire another reference via percpu_ref_tryget_live() can lead to a deadlock while the array is suspended. Fix this by using percpu_ref_get() for md cloned bios. | ||||
| CVE-2026-74373 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1,raid10: fix bio accounting for split md cloned bios Use md_cloned_bio() to control bio accounting instead of relying on r1bio_existed in raid1 or the io_accounting flag in raid10. The previous logic does not reliably reflect whether a bio is an md cloned bio. When a failed bio is split and resubmitted via bio_submit_split_bioset() on the error path, this can lead to either double accounting for md cloned bios, or missing accounting for bios returned from bio_submit_split_bioset() Fix this by using md_cloned_bio() to detect md cloned bios and skip accounting accordingly. | ||||
| CVE-2026-74368 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix memory leak in ath12k_wifi7_dp_rx_h_verify_tkip_mic() In ath12k_wifi7_dp_rx_h_verify_tkip_mic(), the call to ath12k_dp_rx_check_nwifi_hdr_len_valid() may return false when the NWIFI header length is invalid, causing the function to abort early with -EINVAL. When this happens, the error propagates to ath12k_wifi7_dp_rx_h_defrag(), which clears first_frag by setting it to NULL. As a result, the corresponding MSDU is no longer referenced by the defragmentation path and is never freed. This leads to a memory leak for the affected MSDU on this error path. Proper cleanup is required to ensure the MSDU is released when header validation fails during TKIP MIC verification. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 | ||||
| CVE-2026-74350 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate fast symlink target during inode read ocfs2_validate_inode_block() already rejects several inconsistent self-contained dinodes before they are exposed to the rest of the filesystem. Fast symlinks need the same treatment. A zero-cluster symlink is treated as a fast symlink and later read through page_get_link() and ocfs2_fast_symlink_read_folio(). That path uses strnlen() on the inline payload and then copies len + 1 bytes into the folio. If a corrupt dinode stores an i_size that does not fit the inline area or omits the terminating NUL at i_size, that copy reads past the end of the inode block buffer. Reject zero-cluster symlink dinodes whose i_size exceeds the inline fast-symlink capacity or whose inline payload is not NUL-terminated exactly at i_size when the inode block is validated. This keeps malformed fast symlinks from reaching the read path. Validation reproduced this kernel report: KASAN use-after-free in ocfs2_fast_symlink_read_folio+0x12c/0x1f0 RIP: 0033:0x7f5c6d859aa7 Read of size 3905 Call trace: dump_stack_lvl+0x66/0xa0 (?:?) print_report+0xce/0x630 (?:?) ocfs2_fast_symlink_read_folio+0x12c/0x1f0 (fs/ocfs2/inode.c:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x19f/0x330 (?:?) kasan_report+0xe0/0x110 (?:?) kasan_check_range+0x105/0x1b0 (?:?) __asan_memcpy+0x23/0x60 (?:?) filemap_read_folio+0x27/0xe0 (?:?) filemap_read_folio+0x35/0xe0 (?:?) do_read_cache_folio+0x138/0x230 (?:?) __page_get_link+0x26/0x110 (?:?) page_get_link+0x2e/0x70 (?:?) vfs_readlink+0x15e/0x250 (?:?) touch_atime+0x4d/0x370 (?:?) do_readlinkat+0x186/0x200 (?:?) do_user_addr_fault+0x65a/0x890 (?:?) __x64_sys_readlink+0x46/0x60 (?:?) do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) | ||||
| CVE-2026-94300 | 1 Isc | 1 Bind | 2026-10-21 | 8.1 High |
| Replaying GSS-TSIG signed UDP messages can result in memory corruption in "`named`". An attacker who can capture a previously signed UDP message can replay it while the negotiated TSIG key is still valid. By also sending crafted queries to a zone the attacker controls, the attacker may potentially achieve remote code execution. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.29, 9.21.0 through 9.21.26, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.29-S1. | ||||
| CVE-2026-74347 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: cttimeout: detach dataplane timeout policy and repurpose refcount Add a refcount for struct nf_ct_timeout which is used by ct extension to set the custom ct timeout policy, this tells us that the ct timeout is being used by a conntrack entry. When the last conntrack entry drops the refcount on the ct timeout, the ct timeout is released. Remove the refcount for control plane which controls if the ruleset refers to the timeout policy. After this update, it is possible to remove the ct timeout policy from nfnetlink_cttimeout immediately. This is for simplicity not to handle two refcounts on a single object. Remove nf_queue_nf_hook_drop(): a packet sitting in nfqueue will just hold a reference to the nf_ct_timeout object until packet is reinjected, since this is part of the ct extension, this will be released by the time the conntrack is freed. nf_ct_untimeout() is still called to clean up in a best effort basis: the ct timeout on existing entries gets removed when the ct timeout goes away, but as long as the iptables ruleset still refers to the ct timeout through a template, new conntracks may keep attaching it and extend its lifetime until the rule is removed. nf_ct_untimeout() is not called anymore from module removal path, this is unlikely to find timeouts give module refcount is bumped, and the new refcount already tracks the ct timeout policy use so it is released when unused. | ||||
| CVE-2026-74344 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Clear rb node linkage when freeing bpf_rb_root bpf_rb_root_free() detaches the root by copying the current rb_root_cached and then replacing the live root with RB_ROOT_CACHED. It then walks the copied root and drops each object contained in the tree. This leaves the rb node state intact while dropping the object. If the object is refcounted and survives the drop, its bpf_rb_node_kern still contains an owner pointer to the freed root and stale rb tree linkage. If a later bpf_rb_root allocation reuses the same address, bpf_rbtree_remove() can incorrectly pass the owner check and call rb_erase_cached() on a node whose rb pointers belong to the old tree. Mirror the list draining behavior by marking nodes as busy while the root is being detached, then clear the rb node and release the owner before dropping the containing object. This makes surviving nodes unowned and safe to reject from remove or accept for a later add. | ||||
| CVE-2026-74318 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix deadlock cloning inline extent when using flushoncommit In commit b48c980b6a7e ("btrfs: fix deadlock between reflink and transaction commit when using flushoncommit") a deadlock was fixed between reflinks and transaction commits when the fs is mounted with the flushoncommit option. This happened when we had to copy an inline extent's data to the destination file. However the issue was fixed only for the case where the destination offset is 0, it missed the case when the offset is greater than zero. Fix this by ensuring we get i_size update whenever we copied an inline extent's data into the destination file. Syzbot reported this with the following trace: INFO: task kworker/u8:3:57 blocked for more than 143 seconds. Not tainted syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:3 state:D stack:21600 pid:57 tgid:57 ppid:2 task_flags:0x4208160 flags:0x00080000 Workqueue: writeback wb_workfn (flush-btrfs-129) Call Trace: <TASK> context_switch kernel/sched/core.c:5402 [inline] __schedule+0x16f9/0x5500 kernel/sched/core.c:7204 __schedule_loop kernel/sched/core.c:7283 [inline] schedule+0x164/0x360 kernel/sched/core.c:7298 wait_extent_bit fs/btrfs/extent-io-tree.c:905 [inline] btrfs_lock_extent_bits+0x59c/0x700 fs/btrfs/extent-io-tree.c:2008 btrfs_lock_extent fs/btrfs/extent-io-tree.h:152 [inline] btrfs_invalidate_folio+0x440/0xc00 fs/btrfs/inode.c:7718 extent_writepage fs/btrfs/extent_io.c:1848 [inline] extent_write_cache_pages fs/btrfs/extent_io.c:2552 [inline] btrfs_writepages+0x12f3/0x2410 fs/btrfs/extent_io.c:2684 do_writepages+0x32e/0x550 mm/page-writeback.c:2571 __writeback_single_inode+0x133/0x10e0 fs/fs-writeback.c:1764 writeback_sb_inodes+0x97f/0x1980 fs/fs-writeback.c:2056 wb_writeback+0x445/0xb00 fs/fs-writeback.c:2241 wb_do_writeback fs/fs-writeback.c:2388 [inline] wb_workfn+0x3fd/0xf20 fs/fs-writeback.c:2428 process_one_work+0x98b/0x1630 kernel/workqueue.c:3318 process_scheduled_works kernel/workqueue.c:3401 [inline] worker_thread+0xb49/0x1140 kernel/workqueue.c:3482 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> INFO: task syz.0.145:8523 blocked for more than 143 seconds. Not tainted syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz.0.145 state:D stack:22752 pid:8523 tgid:8522 ppid:5850 task_flags:0x400140 flags:0x00080002 Call Trace: <TASK> context_switch kernel/sched/core.c:5402 [inline] __schedule+0x16f9/0x5500 kernel/sched/core.c:7204 __schedule_loop kernel/sched/core.c:7283 [inline] schedule+0x164/0x360 kernel/sched/core.c:7298 wb_wait_for_completion+0x3e8/0x790 fs/fs-writeback.c:227 __writeback_inodes_sb_nr+0x24c/0x2d0 fs/fs-writeback.c:2847 try_to_writeback_inodes_sb+0x9a/0xc0 fs/fs-writeback.c:2895 btrfs_start_delalloc_flush fs/btrfs/transaction.c:2182 [inline] btrfs_commit_transaction+0x813/0x2fc0 fs/btrfs/transaction.c:2371 btrfs_sync_file+0xdf4/0x1230 fs/btrfs/file.c:1822 generic_write_sync include/linux/fs.h:2663 [inline] btrfs_do_write_iter+0x6a9/0x840 fs/btrfs/file.c:1473 new_sync_write fs/read_write.c:595 [inline] vfs_write+0x629/0xba0 fs/read_write.c:688 ksys_write+0x156/0x270 fs/read_write.c:740 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x15f/0x560 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5a0bdece59 RSP: 002b:00007f5a0b446028 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007f5a0c065fa0 RCX: 00007f5a0bdece59 RDX: 000000000000029f RSI: 0000200000 ---truncated--- | ||||
| CVE-2026-74317 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ixgbe: do not configure xps for XDP queues netif_set_xps_queue() should not be called for an XDP Tx queue, since such queues are not netdev-exposed. On systems with number of CPUs >=64, on E610 adapter, netdev is configured with maximum number queue pairs being 63 (due to MSI-X assignment), but configuring XDP results in 64 XDP queues. So, during XDP program load, when netif_set_xps_queue() is called for the last XDP queue, we get a WARNING with a call trace and KASAN report afterwards (if enabled). [ 2012.699800] WARNING: net/core/dev.c:2854 at __netif_set_xps_queue+0x116a/0x1e40, CPU#36: xdpsock/103668 [...] [ 2012.700029] RIP: 0010:__netif_set_xps_queue+0x116a/0x1e40 [ 2012.700035] Code: b6 34 06 48 89 f8 83 e0 07 83 c0 01 40 38 f0 7c 09 40 84 f6 0f 85 03 0a 00 00 0f b7 44 24 40 66 43 89 44 6a 18 e9 01 fb ff ff <0f> 0b e9 f2 ee ff ff 44 8b 44 24 44 45 85 c0 74 50 4d 85 e4 0f 84 [ 2012.700040] RSP: 0018:ffff8882369aeb28 EFLAGS: 00010246 [ 2012.700046] RAX: 0000000000000000 RBX: 000000000000003f RCX: 0000000000000000 [ 2012.700050] RDX: 1ffff1111da3d891 RSI: ffff888120e34250 RDI: ffff8888ed1ec488 [ 2012.700054] RBP: ffff888913281560 R08: 0000000000000000 R09: ffff8888ed1ec000 [ 2012.700058] R10: ffff8888a2e83180 R11: 0000000000000000 R12: 0000000000007fa8 [ 2012.700061] R13: 000000000000003f R14: ffff888120e34854 R15: ffff8889132817c8 [ 2012.700065] FS: 00007fc8ea9ff740(0000) GS:ffff88884cefe000(0000) knlGS:0000000000000000 [ 2012.700069] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2012.700073] CR2: 00007f81c8000020 CR3: 00000002299f8006 CR4: 00000000007726f0 [ 2012.700077] PKRU: 55555554 [ 2012.700080] Call Trace: [ 2012.700084] <TASK> [ 2012.700087] ? ktime_get+0x61/0x150 [ 2012.700097] ? usleep_range_state+0x133/0x1b0 [ 2012.700108] ? __pfx_usleep_range_state+0x10/0x10 [ 2012.700114] netif_set_xps_queue+0x31/0x50 [ 2012.700119] ixgbe_configure_tx_ring+0x472/0x920 [ixgbe] [...] [ 2012.700486] ixgbe_xdp+0x38f/0x750 [ixgbe] [...] [ 2012.701094] BUG: KASAN: slab-out-of-bounds in __netif_set_xps_queue+0x1ac5/0x1e40 [ 2012.701100] Write of size 4 at addr ffff88888d43cff8 by task xdpsock/103668 Skip XPS configuration for XDP Tx queues. | ||||
| CVE-2026-74307 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: validate donor file superblock early in EXT4_IOC_MOVE_EXT Reject the EXT4_IOC_MOVE_EXT ioctl early if the donor file does not belong to the same superblock as the original file. Currently, this validation is performed inside ext4_move_extents() by mext_check_validity(), but only after lock_two_nondirectories() has already acquired the inode locks. When the donor fd refers to a file on a different filesystem (e.g., overlayfs), this late validation creates a circular lock dependency: CPU0 (overlayfs write) CPU1 (ext4 ioctl) ---- ---- inode_lock(ovl_inode) mnt_want_write_file(filp) sb_start_write(ext4_sb) [sb_writers] backing_file_write_iter() vfs_iter_write(real_file) file_start_write(real_file) sb_start_write(ext4_sb) [blocked by freeze] lock_two_nondirectories() inode_lock(ovl_inode) [blocked] With a concurrent freeze operation holding sb_writers write side, this forms a deadlock cycle: CPU0 waits for freeze to complete, freeze waits for CPU1's sb_writers reader to exit, CPU1 waits for CPU0's inode lock. Since EXT4_IOC_MOVE_EXT exchanges physical extents between two files, it fundamentally requires both files to reside on the same ext4 filesystem. Moving the superblock check before any lock acquisition is both semantically correct and eliminates the circular dependency by ensuring that cross-filesystem donor fds are rejected before sb_writers or inode locks are taken. | ||||
| CVE-2026-74278 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Fix kernel heap address leak in bounce_error_event() The comment above bounce_error_event() documents that user clients should receive SNDRV_SEQ_EVENT_BOUNCE with the original event embedded as variable-length data, while kernel clients should receive SNDRV_SEQ_EVENT_KERNEL_ERROR with a quoted kernel pointer. However, the implementation unconditionally uses SNDRV_SEQ_EVENT_KERNEL_ERROR with data.quote.event set to the raw struct snd_seq_event pointer for all clients. When a bounce error event is delivered to a USER_CLIENT via snd_seq_read(), the kernel heap address in data.quote.event is exposed to userspace through copy_to_user() in the fixed-length branch. This is a distinct leak path from the one addressed by commit 705dd6dcbc0e ("ALSA: seq: Clear variable event pointer on read"), which sanitizes data.ext.ptr in the variable-length branch of snd_seq_read(). The bounce_error_event() leak uses fixed-length events that take the else branch where no sanitization occurs. Differentiate the bounce event by client type. For USER_CLIENT, send SNDRV_SEQ_EVENT_BOUNCE with SNDRV_SEQ_EVENT_LENGTH_VARIABLE and data.ext pointing to the original event. The variable-length path in snd_seq_event_dup() copies the event data into chained cells, and snd_seq_expand_var_event() copies only the content -- never the pointer -- to userspace. For KERNEL_CLIENT, keep the existing SNDRV_SEQ_EVENT_KERNEL_ERROR behavior with the quoted pointer. | ||||
| CVE-2026-74273 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cxl/region: Block region delete during region creation Expand the range lock, rename it "regions_lock", to disable region deletion in the critical period between construct_region() and attach_target(), as well as the period between device_add() and registering the remove actions. Otherwise, userspace can confuse the kernel. It can violate the assumption the region stays registered through the completion of cxl_add_to_region(). It can violate the assumption that devm_add_action_or_reset() is working with a live 'struct cxl_region'. It is ok for the region to disappear outside of those windows as that mirrors device hotplug flows where the proper locks are held. | ||||
| CVE-2026-74272 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cxl/region: Resolve region deletion races Sungwoo noticed that the sysfs trigger to delete a region may try to delete a region multiple times. It also has no exclusion relative to the kernel releasing the region via CXL root device teardown. Instead of installing new cxl root devres actions per region, use the existing root decoder unregistration event to remove all remaining regions. An xarray of regions replaces a devres list of regions. This handles 3 separate issues with the old approach: 1/ sysfs users racing to delete the same region: no longer possible now that the regions_lock is held over the lookup and deletion. 2/ multiple actions triggering deletion of the same region: solved by erasing regions while holding @regions_lock, and only proceeding on successful erasure. 3/ userspace racing devres_release_all() to trigger the devres not found warning: solved by sysfs unregistration not requiring a release action | ||||