Export limit exceeded: 412849 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 412849 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 412849 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (412849 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74695 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_flow_table: drop existing skb dst before skb_dst_set_noref() Incoming skbs passing through netfilter flowtable offload hooks (or XFRM offload path) might already carry a ref-counted dst_entry assigned during earlier RX or routing steps. Calling skb_dst_set_noref() when skb already holds a ref-counted dst overwrites skb->_skb_refdst, leaking the previous dst_entry reference count and triggering a DEBUG_NET_WARN_ON_ONCE assertion in skb_dst_check_unset(): WARNING: at skb_dst_check_unset include/linux/skbuff.h:1170 WARNING: at skb_dst_set_noref include/linux/skbuff.h:1234 WARNING: at nf_flow_offload_ip_hook+0xf6c/0x2b60 net/netfilter/nf_flow_table_ip.c:864 Drop any existing dst_entry reference with skb_dst_drop(skb) before setting the non-referenced flowtable destination. | ||||
| CVE-2026-74690 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/ism: Fix UAF of sba and ieq during ism_dev_exit() A ism interrupt handler can be active in parallel with ism_dev_exit(), accessing freed data structures. No new interrupts will be generated after unregister_ieq(). Drain ongoing interrupt handlers by free_irq(), before freeing ism data structures. | ||||
| CVE-2026-74687 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: watchdog: at91sam9_wdt: prevent timer rearm during teardown at91_ping() rearms the watchdog timer from its callback. timer_delete() neither waits for a running callback nor prevents it from rearming the timer, so probe failure or driver removal can leave the timer accessing the devm-allocated at91wdt after it has been freed. Use timer_shutdown_sync() on both teardown paths. It waits for a running callback and rejects any attempt by the callback to rearm the timer. | ||||
| CVE-2026-74684 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net: tap: set skb->dev before parsing virtio net header in tap_get_user_xdp() The commit 4f61f133f354 ("net: tap: NULL pointer derefence in dev_parse_header_protocol when skb->dev is null") fixed a crash in tap_get_user() by assigning skb->dev before calling tun_vnet_hdr_to_skb(). This is required because virtio_net_hdr_to_skb() may invoke dev_parse_header_protocol(), which dereferences skb->dev. Without the assignment, a NULL pointer dereference can occur. However, tap_get_user_xdp() still parses the virtio-net header before assigning skb->dev. When the vhost TX path passes an XDP buffer containing a GSO virtio-net header but the protocol is set to zero on purpose, tun_vnet_hdr_to_skb() can reach dev_parse_header_protocol() while skb->dev is still NULL, resulting in a crash. Fix this by looking up the tap device and assigning skb->dev before calling tun_vnet_hdr_to_skb(), matching the ordering already used in tap_get_user(). Preserve the existing RCU read-side critical section across dev_queue_xmit(). | ||||
| CVE-2026-74653 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250_of: clear stuck empty-FIFO RX-timeout on LPC32xx The NXP LPC32xx UART (PORT_LPC3220) can latch an RX character-timeout interrupt while the RX FIFO is empty: IIR reports UART_IIR_RX_TIMEOUT (0x0c) but LSR.DR is clear. A character timeout is only cleared by reading RHR, but serial8250_rx_chars() reads RHR only when LSR.DR is set, so nothing ever clears the condition. The interrupt is level-triggered and re-fires immediately, so on a single-core ARM926 the resulting interrupt storm livelocks the CPU. It is reproducible when userspace repeatedly opens the front-panel port (ttyS1): serial8250_do_set_termios() re-enables interrupts on unlock and the handler then spins forever with iir=0xcc lsr=0x60 ier=0x05, tripping the soft-lockup detector in serial8250_handle_irq_locked(). LPC32xx has no dedicated 8250 glue driver, it's driven by the generic 8250_of. Add a hardware specific handle_irq for PORT_LPC3220, wired up in of_platform_serial_setup() the same way fsl8250_handle_irq is installed. The handler follows dw8250_handle_irq(): on an RX timeout with an empty FIFO (LSR.DR and LSR.BI clear) it does one throwaway RHR read to clear the condition, then calls serial8250_handle_irq_locked(). No real received data is ever discarded, and it is a no-op on healthy UARTs which never report a timeout with DR clear. This is the same class of bug already worked around in other 8250 drivers; see commit 424d79183af0 ("serial: 8250_dw: Avoid "too much work" from bogus rx timeout interrupt") which reports the identical iir=0xcc/lsr=0x60. See also UART_RX_TIMEOUT_QUIRK in 8250_omap, and the note in 8250_bcm7271. | ||||
| CVE-2026-74611 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: tls: rx: restore msg_iter before TLS 1.3 optimistic retry tls_decrypt_sg() advances msg->msg_iter when it maps user pages for the optimistic TLS 1.3 zero-copy path. If the decrypted record turns out not to be unpadded application data, tls_decrypt_sw() retries into a kernel skb, but leaves the iterator advanced. The subsequent copy from the skb then writes decrypted bytes again at a later point in the caller iovecs while recvmsg() reports only the post-retry length. A TLS peer can trigger this after the receiver enables TLS_RX_EXPECT_NO_PAD. Revert the iterator by the number of bytes consumed by the optimistic mapping before retrying without zero-copy. Add a selftest which sends a TLS 1.3 control record with TLS_RX_EXPECT_NO_PAD enabled and verifies that recvmsg() does not overwrite later iovecs beyond the returned length. | ||||
| CVE-2026-74605 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: eventfs: Use children field for rcu head and add memory barriers When an eventfs inode is freed, it sets ei->is_freed and then uses its ei->list to add it to the srcu link list as the list field is a union with the rcu list head. As the ei->list is used to iterate over an SRCU protected list without taking the eventfs_mutex, there's nothing stopping the iteration over that list to see the ei->rcu instead of the ei->list and it will read a corrupt target. To fix this, change the union of the rcu list head with the children list. On freeing the eventfs inode, set the is_free and execute a smp_wmb() before adding the eventfs inode to the SRCU list. On iteration of the ei->children list, at the start, execute a smp_rmb() and then read the is_freed of the ei to see if the children list is still valid. If is_freed is set, then the ei_child read is not valid and the loop should exit immediately. | ||||
| CVE-2026-74600 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/page_table_check: skip special zero mappings page_table_check_set() and page_table_check_clear() account mappings based on PageAnon(). Shared zero-page PTEs and huge zero PMDs are special mappings, but page_table_check can still account them as file-backed pages. An unprivileged process can populate enough zero mappings to overflow file_map_count and hit the existing BUG_ON(). The PTE path can do this with the shared zero page, and the PMD path can do the same with huge zero mappings. Skip special zero mappings in the user page-table accounting paths. Keep the PTE-side pte_special() check, and identify huge zero PMDs from the mapped folio instead of pmd_special(). That covers architectures where pmd_special() is a no-op without adding huge_zero_pfn checks to the generic counter helpers. | ||||
| CVE-2026-74596 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs,fsverity: remove check for fsverity being enabled in setattr_prepare() The check that fs-verity is available in the kernel is not necessary here. Filesystems could have fsverity files even without fs-verity enabled. In that case, truncate on fsverity file will succeed, what this check is trying to prevent. | ||||
| CVE-2026-74571 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: skip global block reserve accounting for rescue mounts [BUG] Mounting with rescue=ibadroots after corrupting the block group tree root triggers a NULL pointer dereference: BUG: kernel NULL pointer dereference, address: 0000000000000100 RIP: 0010:btrfs_update_global_block_rsv+0x9d/0x1c0 [btrfs] Call Trace: fill_dummy_bgs+0xd4/0x120 [btrfs] open_ctree+0xc6e/0x1ca0 [btrfs] btrfs_get_tree+0x50d/0xa40 [btrfs] The same crash occurs with a corrupted raid stripe tree root, via btrfs_read_block_groups() instead of fill_dummy_bgs(). [CAUSE] With rescue=ibadroots, btrfs_read_roots() allows the mount to continue when either root cannot be read, leaving the corresponding root pointer NULL while its on-disk feature bit remains set. btrfs_update_global_block_rsv() then dereferences the missing root based on the feature bit alone. [FIX] Rescue mounts are fully read-only and cannot start transactions, so the global reserve is never consumed. Under btrfs_is_full_ro(), mark the reserve as full and return before performing the accounting. And since we need to check if the fs is mount fully RO, export fs_is_full_ro() as btrfs_is_full_ro(), and move it to fs.h. [ Squash the fs_is_full_ro() export commit into this one. ] | ||||
| CVE-2026-74560 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xsk: fix buffer leak in xsk_drop_skb() for AF_XDP multi-buffer Tx This patch is inspired by the check[1] from sashiko. It says when overflow happens, the address of cq to be published is invalid. Actually the severer thing is the whole process of publishing the address of cq in this particular case is not right: it should truely publish the address and advance the cached_prod in cq as long as it reads descriptors from txq. The following is the full analysis. xsk_drop_skb() is called in three places, which all discard a partially built multi-buffer skb: 1) xsk_build_skb() -EOVERFLOW error path: packet exceeds MAX_SKB_FRAGS 2) __xsk_generic_xmit() post-loop cleanup: an invalid descriptor in the TX ring prevents the partial packet from completing 3) xsk_release(): socket close while xs->skb holds an incomplete packet In all three cases, the TX descriptors for the already-processed frags have been consumed from the TX ring (xskq_cons_release), and CQ slots have been reserved. However, xsk_drop_skb() calls xsk_consume_skb() which cancels the CQ reservations via xsk_cq_cancel_locked(). Since the buffer addresses never appear in the completion queue, userspace permanently loses track of these buffers. Fix this by letting consume_skb() trigger the existing xsk_destruct_skb destructor, which already submits buffer addresses to the CQ via xsk_cq_submit_addr_locked(). Note that cancelling the descriptors back to the TX ring (via xskq_cons_cancel_n) is not a appropriate option because an oversized packet that always exceeds MAX_SKB_FRAGS would be retried indefinitely, which is an obviously deadlock bug in the TX path. Also move the desc->addr assignment in xsk_build_skb() above the overflow check so that the current descriptor's address is recorded before a potential -EOVERFLOW jump to free_err, consistent with the zerocopy path in xsk_build_skb_zerocopy(). [1]: https://lore.kernel.org/all/20260425041726.85FB3C2BCB2@smtp.kernel.org/ | ||||
| CVE-2026-74559 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xsk: drain continuation descs after overflow in xsk_build_skb() Fix generic xmit path multi-buffer logic when packets are either too big (count of descriptors exceed MAX_SKB_FRAGS) or an invalid descriptor is included in fragmented packet. Introduce xdp_sock::drain_cont and act upon this flag - when it is set, keep on consuming descriptors from AF_XDP Tx ring and put them directly onto Cq. Previously these descriptors were silently lost and could never be reached again. | ||||
| CVE-2026-74558 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xsk: reclaim invalid Tx descriptors in ZC batch path The zero-copy Tx batch parser stops when it encounters an invalid descriptor. If this happens after one or more continuation descriptors, the Tx consumer can be advanced past fragments that are neither submitted to the driver nor returned to userspace through the completion ring. A similar problem occurs when a packet exceeds xdp_zc_max_segs. The descriptors consumed up to the limit are released without completion, and the remaining continuation descriptors can subsequently be interpreted as the beginning of another packet. Parse Tx batches in packet units and distinguish descriptors belonging to complete valid packets from descriptors consumed while draining an invalid or oversized packet. Return the former to the driver and append the latter to the CQ address area so userspace can reclaim their UMEM frames. Treat a standalone invalid descriptor as a one-descriptor reclaim-only packet. Advancing the Tx-ring consumer releases the ring slot, but does not by itself return ownership of the referenced UMEM frame to userspace. Once draining starts, continue until the packet's end-of-packet descriptor is consumed. Preserve the drain state on the socket when EOP has not yet been supplied, so draining can continue during a later call. Leave incomplete but otherwise valid packets on the Tx ring. Shared-UMEM pools using multi-buffer Tx also need packet-framed parsing. Walk their Tx sockets one packet at a time, preserving the existing per-socket fairness scheme, instead of using the legacy one-descriptor fallback. Keep that fallback for shared pools that do not use multi-buffer Tx. Since the drain state is maintained per socket and both the singular and shared paths can resume an interrupted drain, changing the socket list from singular to shared requires no special bind-time transition. CQ entries are positional, and drivers may complete only part of the Tx work returned by xsk_tx_peek_release_desc_batch(). Therefore, reclaim-only entries cannot be published immediately when earlier driver-visible descriptors are still outstanding. Track the number of driver-visible CQ entries preceding the reclaim entries. Let xsk_tx_completed() publish partial hardware Tx completions, and publish the reclaim entries only after every earlier Tx descriptor has completed. Complete a reclaim-only batch immediately when there is no driver-visible work in front of it, and prevent another Tx batch from being appended while reclaim entries remain pending. Also cap batch processing by the size of the pool's temporary descriptor array, as Tx rings belonging to sockets sharing a UMEM may have different sizes. This ensures that every invalid Tx descriptor consumed by the ZC batch path is either submitted to the driver as part of a valid packet or returned to userspace without violating CQ completion ordering. | ||||
| CVE-2026-74544 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: validate offshift to prevent shift-out-of-bounds u32_change() copies the user-provided tc_u32_sel.offshift (unsigned char, 0-255) into the kernel knode object without bounds validation. When a packet later hits u32_classify() with TC_U32_VAROFFSET set, it evaluates `ntohs(offmask & *data) >> offshift` where the left operand is a 16-bit value promoted to a 32-bit int. Any offshift >= 32 is undefined behavior per C11 6.5.7p3, triggerable by an unprivileged user via user/network namespaces. UBSAN: shift-out-of-bounds in net/sched/cls_u32.c:236:43 shift exponent 32 is too large for 32-bit type int Fix this by rejecting offshift >= 16 during filter creation in u32_change(). | ||||
| CVE-2026-74543 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: udp_tunnel: fix memory leak in udp_tunnel_nic_unregister() syzbot reported a memory leak [1] in the UDP tunnel NIC offload code. When device registration fails (e.g. in register_netdevice()), netdev core unwinds by sending a single NETDEV_UNREGISTER notification. If work was queued during NETDEV_REGISTER (utn->work_pending is set), udp_tunnel_nic_unregister() returns early: if (utn->work_pending) return; Because failed registrations do not enter netdev_wait_allrefs_any(), no subsequent NETDEV_UNREGISTER rebroadcast will ever occur. As a result, the struct udp_tunnel_nic allocated in udp_tunnel_nic_alloc() is leaked permanently. Fix this by removing the early return. Instead, synchronously cancel any pending work with cancel_delayed_work_sync() before freeing @utn. To be able to call cancel_delayed_work_sync() while holding RTNL (the work also needs RTNL), switch udp_tunnel_nic_device_sync_work() to rtnl_trylock(). If RTNL is contended, requeue the work with a 1 jiffy delay (via queue_delayed_work()) to prevent high CPU contention while waiting for RTNL lock. The utn->work_pending bookkeeping is no longer needed and is removed, as the workqueue core already tracks the pending/running state of the work. [1] BUG: memory leak unreferenced object 0xffff888127d5f840 (size 96): comm "syz-executor", pid 5806, jiffies 4294942188 backtrace (crc 99fdb6c8): __kmalloc_noprof+0x3bf/0x550 udp_tunnel_nic_alloc net/ipv4/udp_tunnel_nic.c:756 [inline] udp_tunnel_nic_register net/ipv4/udp_tunnel_nic.c:833 [inline] udp_tunnel_nic_netdevice_event+0x804/0xab0 net/ipv4/udp_tunnel_nic.c:931 notifier_call_chain+0x59/0x160 kernel/notifier.c:85 call_netdevice_notifiers_info+0x7d/0xb0 net/core/dev.c:2250 register_netdevice+0xc10/0xeb0 net/core/dev.c:11478 | ||||
| CVE-2026-74542 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix folio_queue ENOMEM in writeback by adding a mempool Fix the handling of folio_queue allocation failure in writeback by adding a mempool and passing in gfp_t flags to the rolling buffer functions that allocate memory, using the mempool if gfp != GFP_KERNEL. This is then extended upwards and the gfp to be used for a request is stored in the netfs_io_request struct and is then used for both requests and subrequests, eliminating the sleeping loops there. The failure caused: folio != NULL WARNING: fs/netfs/write_issue.c:603 at netfs_writepages+0x883/0xa10 fs/netfs/write_issue.c:603, CPU#3: syz.0.17/5919 | ||||
| CVE-2026-74533 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix race of kfree vs kref_get_unless_zero hci_conn::iso_data is accessed and modified without lock or RCU. This leads to a race [Task hdev->workqueue] [Task 2] iso_recv iso_conn_put(conn) conn = LOAD hcon->iso_data iso_conn_free(conn) iso_conn_hold_unless_zero(conn) hcon->iso_data = NULL kfree(conn) kref_get_unless_zero(&conn->ref) /* UAF */ and also to races in iso_conn_add() vs. iso_conn_free(). Fix by adding spinlock hci_conn::proto_lock and using it to guard hci_conn::iso_data. | ||||
| CVE-2026-74527 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Block VFs from clobbering special CGX PKIND state PF and VF NIX LFs that share a CGX LMAC reuse the same hardware PKIND programming. When HiGig2 or EDSA parsing is enabled, a VF NIX LF alloc must not reset the LMAC RX PKIND or default TX parse config over the PF setup. Add cgx_get_pkind() and rvu_cgx_is_pkind_config_permitted() so VFs skip cgx_set_pkind(), rvu_npc_set_pkind(), and NIX_AF_LFX_TX_PARSE_CFG updates when the LMAC is using NPC_RX_HIGIG_PKIND or NPC_RX_EDSA_PKIND. | ||||
| CVE-2026-74513 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dibs: fix use-after-free of dmb_node in loopback attach/detach/unregister dibs_lo_attach_dmb(), dibs_lo_detach_dmb() and dibs_lo_unregister_dmb() look up the dmb_node under dmb_ht_lock, drop the lock and only then operate on the node's refcount. Nothing keeps the node alive across that window: __dibs_lo_unregister_dmb() removes the node from the hash table under the write lock and immediately frees it. A concurrent final put can therefore free the node between the lookup and the refcount operation: CPU0 (attach) CPU1 (owner unregisters) read_lock_bh(&dmb_ht_lock) find dmb_node (refcnt == 1) read_unlock_bh(&dmb_ht_lock) refcount_dec_and_test() 1 -> 0 write_lock_bh(&dmb_ht_lock) hash_del(&dmb_node->list) write_unlock_bh(&dmb_ht_lock) kfree(dmb_node) refcount_inc_not_zero(&dmb_node->refcnt) <-- use-after-free The same window exists for the refcount_dec_and_test() calls in the detach and unregister paths. Close the race structurally by making hash table membership and the refcount transitions atomic with respect to each other: - Perform the final refcount_dec_and_test() and hash_del() in a single dmb_ht_lock write-side critical section, in both the unregister and the detach path. Freeing the node still happens after the lock is dropped, which is safe because a node whose refcount reached zero has left the hash table and can no longer be found. - This establishes the invariant that any node found in the hash table holds at least one reference, and that the final reference can only be dropped under the write lock. dibs_lo_attach_dmb() can thus take its reference with a plain refcount_inc() while still holding the read lock; refcount_inc_not_zero() is no longer needed. __dibs_lo_unregister_dmb() no longer touches the hash table and is renamed to dibs_lo_free_dmb() accordingly. Note: commit cc21191b584c ("dibs: Move data path to dibs layer") moved the code to its current location; the race was introduced earlier by commit c3a910f2380f ("net/smc: implement DMB-merged operations of loopback-ism"). Tested SMC-D via ISM and dibs loopback. | ||||
| CVE-2026-74466 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Close speculative mem read possibility The domain value is extracted from a given CCA or EP11 ioctl struct when a CPRB is about to be sent. Thus this is a user controlled value. Under some special conditions (custom device node used, administrative load) this value is used as an array index after bounds checking, but without speculation barrier. Add the missing array_index_nospec() call to prevent speculative execution where this domain value is used. | ||||