Export limit exceeded: 412903 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (412903 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98721 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: cadence: Initialize IRQ state before requesting IRQ The Cadence NAND interrupt handler uses both the IRQ lock and completion object. Registering the IRQ before initializing them leaves a window in which a pending interrupt can access uninitialized synchronization state. Initialize them before registering the handler. | ||||
| CVE-2026-98717 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Bail from shadow walks if the root is invalid or a dummy When walking shadow page tables, immediately terminate the walk if the root is a "dummy" root, i.e. a root whose top-level page table is backed by the zero page, but otherwise doesn't exist. If memslot creation races with a stage-2 page fault (EPT violation or #NPF) from L2, then if the stars align, KVM will attempt to walk shadow page tables using the zero page and hit a NULL pointer deref. BUG: kernel NULL pointer dereference, address: 0000000000000021 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP CPU: 30 UID: 1000 PID: 941 Comm: qemu Not tainted 7.2.0-rc2-1b731e5ded48-next-vm #1741 PREEMPTLAZY Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:__kvm_mmu_invalidate_addr+0xea/0x210 [kvm] Call Trace: <TASK> kvm_mmu_invalidate_addr+0x92/0xe0 [kvm] __kvm_inject_emulated_page_fault+0x67/0x80 [kvm] ept_page_fault+0x160/0x850 [kvm] kvm_mmu_do_page_fault+0x102/0x1f0 [kvm] kvm_mmu_page_fault+0x8e/0x6b0 [kvm] vmx_handle_exit+0x163/0x640 [kvm_intel] kvm_arch_vcpu_ioctl_run+0x960/0x2120 [kvm] kvm_vcpu_ioctl+0x2c7/0x970 [kvm] __x64_sys_ioctl+0x90/0xd0 do_syscall_64+0x67/0x5f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f606d0b53bb Opportunistically harden the shadow walks against fully invalid roots, but WARN, as all callers are expected/required to pre-check for a valid root. Don't WARN in the dummy root case as the whole point of using a dummy root is to provide a root that's valid enough to enter the guest, i.e. it should Just Work for all flows except those that *need* to know about dummy roots. Alternatively, KVM could allocate a dedicated page and associated shadow page structure for the dummy root, which is very tempting as it such an approach should be more resilient against unexpected behavior. But that would be a much larger and thus riskier change than simply terminating walks of dummy roots. | ||||
| CVE-2026-98716 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Use the active VMCB's MSR bitmap when checking if MSR is intercepted Use the MSR permission bitmap of the active VMCB instead of assuming that KVM is always using vmcb02's bitmap when L2 is active, as KVM uses msrpm02 if and only if L1 wants to intercept MSR accesses, i.e. if and only if KVM needs to merge msprm01 with msrpm12. Don't bother tracking the virtual address of the bitmap that's being used, as __va() is cheap on x86, and caching the virtual address would introduce yet another source of potentially stale information. | ||||
| CVE-2026-98711 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cw1200: fix TX padding OOB read leaking heap data to device The TX path rounds the transfer size up to the bus alignment (align_size(), up to 511 bytes for SDIO, 1 byte for SPI) but sends the padded length straight from the frame buffer, which has no room reserved for the padding. cw1200_data_write() therefore reads past the end of the frame and the bus transfer carries those bytes to the device. A bogus device can collect up to 511 bytes of kernel heap data per TX frame. The RX path does not have this problem: it allocates the skb with the aligned length (alloc_len) before reading. Compute the exact padding with the bus align_size() callback, make sure queued TX frames have tailroom for it, and zero the padding bytes before the transfer so nothing past the frame is exposed. This is not expected to change driver behavior on most cases: frame contents and transfer sizes are unchanged, only the content of the padding bytes (previously undefined stale memory, now zero), which the device never reads since the WSM header carries the real frame length. The skb expansion can only fail under memory exhaustion, in which case the frame is dropped like on the existing error paths of cw1200_tx(). Discovered by Atuin - Automated Vulnerability Discovery Engine. | ||||
| CVE-2026-98710 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlegacy: 3945: free EEPROM data on remove il3945_pci_probe() calls il_eeprom_init(), which allocates memory for the EEPROM data. The probe failure paths release this allocation with il_eeprom_free(), but the remove path does not free it after a successful probe. As a result, the EEPROM data is leaked when the PCI device is removed. Free the EEPROM data in il3945_pci_remove() before releasing the mac80211 hardware structure. This issue was found by manual code inspection. | ||||
| CVE-2026-98709 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: count only matching reservations in reserved switch ieee80211_vif_use_reserved_switch() validates a replacement by counting assigned links on ctx->replace_ctx and treating reservations too broadly. A link can still be assigned to the old channel context while holding a reservation that belongs to a different replacement operation. That can make the current replacement appear complete too early. If another link finalizes first, the function can free the WILL_BE_REPLACED chanctx while the unmatched link and driver still use it, leading to a use-after-free in later beacon generation. Require an in-place reservation to point at the current replacement context, and require the reserved and assigned contexts to be the matching replacement pair, before counting or moving the link. | ||||
| CVE-2026-98708 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: keep paired old chanctx alive An in-place replacement keeps reciprocal replace_ctx pointers between the old WILL_BE_REPLACED chanctx and the new REPLACES_OTHER chanctx. However, the early free paths only consider assigned and reserved link users when deciding whether to free the old chanctx. That lets the old chanctx be freed too early while the replacement partner still points back to it, either when the last assigned link is released or when that link successfully reassigns to another existing context. Later unreserve and switch-finalization paths can then follow a stale replace_ctx pointer. Keep a paired old chanctx alive until the replacement pair has been torn down. Apply the same check to both __ieee80211_link_release_channel() and ieee80211_link_use_reserved_reassign(). If the replacement is later abandoned, ieee80211_link_unreserve_chanctx() already tears down the pairing before freeing the old chanctx once no users remain. | ||||
| CVE-2026-98707 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: shut down RX BA session timer on teardown Tearing down an RX BA session can leave the session timer queued on a freed tid_rx. Later timer-wheel processing and the timer callback itself then run against freed memory. An RX BAR handler can dereference tid_rx under RCU before teardown unpublishes it and stay in its read-side critical section while teardown deletes the session timer. The stale handler can then rearm the timer after timer_delete_sync() returns and before the RCU callback frees tid_rx. Use timer_shutdown_sync() so rearm attempts become ineffective once teardown starts. Keep reorder_timer unchanged: teardown marks the session removed under reorder_lock and its release path checks that state before rearming. session_timer has no equivalent guard because ieee80211_rx_h_ctrl() rearms it before taking reorder_lock. | ||||
| CVE-2026-98706 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: drain PS delivery work during station teardown Removing an AP or mesh station can notify the driver and wake TXQs after the station has already been removed from the driver, and can update num_sta_ps and the power-save queues after station cleanup has purged them. sta_deliver_ps_frames() tests sta->dead only before it starts delivery. A worker that passes that test can be delayed while teardown sets sta->dead and removes the station from the driver; when it resumes it still runs the full delivery. The existing cancel_work_sync() sits near the end of __cleanup_single_sta(), after the final driver state transition and after PS accounting and queue purging, so it drains the worker only once the state it has to protect has already changed. Before commit d34ba2168a3c ("mac80211: don't delay station destruction") cleanup was deferred through the same ordered workqueue as the delivery work, which kept the two ordered. Cancel the work after setting sta->dead and before moving the driver state, and move the existing cancellation to the start of __cleanup_single_sta(). The first drain closes the driver-lifetime window; driver callbacks during the remaining state transitions can still queue drv_deliver_wk through ieee80211_sta_block_awake(), so retain the second drain at the start of __cleanup_single_sta(). That drain also covers insertion failures, which reach cleanup without setting sta->dead. | ||||
| CVE-2026-98705 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: account proxy paths against the mesh path limit Proxy-path churn can drive the interface path counter negative and let later mesh path additions exceed MESH_MAX_MPATHS. mesh_path_free_rcu() decrements the interface mpaths counter for entries from both the mesh and proxy path tables, but mpp_path_add() never reserves a slot in that counter. Removing or expiring a proxy path therefore returns a slot that was never charged. mesh_path_add() uses the same counter to enforce MESH_MAX_MPATHS, so once it falls below the number of installed paths the limit no longer holds. Reserve the shared quota before allocating a proxy path and release it on every unsuccessful addition. Mesh and proxy paths now share one 1024-entry budget, so mpp_path_add() can return -ENOSPC at that limit. | ||||
| CVE-2026-98704 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: keep fallback association elements alive Associating to a non-transmitted MBSSID profile reads freed memory while determining the operating channel and applying HT capabilities. When an association response omits WMM, HT, or VHT information, ieee80211_assoc_config_link() parses the cached BSS IEs and copies the missing element pointers out of that fallback parse. For a non-transmitted MBSSID profile those pointers refer to merged-profile storage owned by the parse object, and the fallback block frees that object at its end. The copied pointers are used afterwards to determine the operating channel, configure bandwidth, and apply HT capabilities. Keep the fallback parse result alive until association setup finishes. [reorder variable declaration] | ||||
| CVE-2026-98703 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: minstrel_ht: validate fixed rate index The fixed_rate_idx debugfs file is a plain u32 attribute, so any value can be written to it. minstrel_ht_update_stats() then copies the value into mi->max_tp_rate[] and mi->max_prob_rate, and minstrel_ht_set_rate() uses MI_RATE_GROUP()/MI_RATE_IDX() to index minstrel_mcs_groups[] (42 entries) and mi->groups[].rates[] (10 entries) with it. Writing e.g. 65535 selects group 4095 and rate index 15, far outside both arrays. The out-of-bounds entries are dereferenced and updated as struct minstrel_rate_stats (retry counts, etc.), so the invalid index corrupts adjacent kernel memory. With CONFIG_UBSAN_BOUNDS the access is reported as an array-index-out-of-bounds in minstrel_ht_set_rate(). Only a valid group/rate pair, or U32_MAX to disable fixed rate processing, can be used safely, so reject any other value when the debugfs file is written. The file is only reachable through a root-only debugfs mount, so this is not a privilege boundary. The out-of-bounds access is still a bug that must not be reachable through a writable debugfs attribute. | ||||
| CVE-2026-98701 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: release mesh path quota on failed additions Repeated failed or duplicate mesh path additions can exhaust MESH_MAX_MPATHS while the path table holds fewer paths, which stops new paths to reachable destinations from being created. mesh_path_add() reserves a slot before allocating and inserting a path. If allocation fails, the function returns without releasing the slot. If the rhashtable insertion reports an error or an existing destination, the function discards its candidate but retains the reservation. No new path is installed in any of these cases. Release the reservation whenever the candidate is not installed. | ||||
| CVE-2026-98700 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: set info->band for 802.3 encap offload frames Unlike the 802.11 TX paths, ieee80211_8023_xmit() does not set info->band from the channel context on non-MLD interfaces. It stays at 0, so ieee80211_get_tx_rates() uses the wrong band for these frames. Set it the same way as ieee80211_build_hdr(): drop the frame if there is no channel context, and leave the band at 0 on MLD interfaces. | ||||
| CVE-2026-98699 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix mesh fast xmit path deletion UAF mesh_fast_tx_cache() stores raw mesh_path pointers. Path deletion flushes the cache and then frees the path with kfree_rcu(), but a lookup that already holds the path can insert a new cache entry after the flush. The cache then points at freed memory. Set MESH_PATH_DELETED before flushing, and skip inserting a cache entry if the path or MPP path is already deleted. Check this under the cache walk lock so it is ordered with the flush. Use WRITE_ONCE() for the deletion flag updates because the cache check reads flags without taking state_lock. | ||||
| CVE-2026-98698 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: handle empty FILS association request payload fils_encrypt_assoc_req() accepts a (Re)Association Request frame whose last element is the FILS Session element. crypt_len is then zero and aes_siv_encrypt() is called with an empty plaintext. kmemdup() returns ZERO_SIZE_PTR for a zero-length allocation, so the unconditional sg_init_one() puts an invalid page into the scatterlist. With CONFIG_DEBUG_SG this triggers a kernel BUG in sg_set_buf(); without the debug check the bogus page is handed to the crypto backend. AES-SIV is defined for empty plaintext and the S2V result is then the complete output, so handle this case before the CTR step, which has nothing to encrypt. | ||||
| CVE-2026-98697 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: fix dynamic id driver deregistration race Only free the dynamic ids after having deregistered the driver and removed the "new_id" attribute to avoid leaking any id added by a racing write to the attribute. | ||||
| CVE-2026-98696 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: fix driver deregistration order USB serial driver modules register one driver for the USB bus and one or more drivers for the ports on the USB serial bus. When unloading a driver module, the USB driver must be deregistered before the USB serial bus drivers so that I/O is stopped before unbinding the ports to avoid use-after-free in completion handlers accessing port data. Note that the "new_id" attributes must first be removed to prevent new ids from being added and triggering a probe of the USB driver after it has been deregistered. | ||||
| CVE-2026-98695 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: fix ioctl hangup race The tty ioctls can race with hangup and end up calling into a tty driver for a device that is already gone or powered down. Serialise the callbacks using the tty port mutex and add the missing checks to make sure the port has not been hung up before accessing port driver data or hardware. This specifically avoids dereferencing a NULL-pointer if a device is disconnected during lengthy break signalling. Note that TIOCGICOUNT and TIOCMIWAIT do not access port driver data or hardware and are therefore not affected by the race. | ||||
| CVE-2026-98694 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix KASAN reported use-after-free when request is canceled Alan reported that when doing stress testing sometimes KASAN notices use-after-free during control channel operation (stripped down keeping the relevant parts): BUG: KASAN: slab-use-after-free in tb_cfg_request_sync+0x240/0x250 [thunderbolt] Read of size 24 at addr ffff88811067f290 by task kworker/u40:2/1760 <TASK> tb_cfg_request_sync+0x240/0x250 [thunderbolt] tb_cfg_read_raw+0x367/0x510 [thunderbolt] tb_cfg_read+0xec/0x240 [thunderbolt] tb_port_get_link_generation+0x258/0x420 [thunderbolt] tb_usb3_consumed_bandwidth+0x1c1/0x2c0 [thunderbolt] tb_tunnel_consumed_bandwidth+0xfd/0x910 [thunderbolt] tb_available_bandwidth+0x5f2/0xeb0 [thunderbolt] tb_recalc_estimated_bandwidth+0x2a0/0x1bc0 [thunderbolt] tb_handle_dp_bandwidth_request+0x1897/0x5e20 [thunderbolt] process_one_work+0x675/0x1230 worker_thread+0x5e6/0xf70 kthread+0x365/0x470 ret_from_fork+0x54d/0x710 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 1760: __kmalloc_cache_noprof+0x1ee/0x550 tb_cfg_read_raw+0x1d3/0x510 [thunderbolt] tb_cfg_read+0xec/0x240 [thunderbolt] tb_port_get_link_generation+0x258/0x420 [thunderbolt] tb_usb3_consumed_bandwidth+0x1c1/0x2c0 [thunderbolt] tb_tunnel_consumed_bandwidth+0xfd/0x910 [thunderbolt] tb_available_bandwidth+0x5f2/0xeb0 [thunderbolt] tb_recalc_estimated_bandwidth+0x2a0/0x1bc0 [thunderbolt] tb_handle_dp_bandwidth_request+0x1897/0x5e20 [thunderbolt] process_one_work+0x675/0x1230 worker_thread+0x5e6/0xf70 kthread+0x365/0x470 ret_from_fork+0x54d/0x710 ret_from_fork_asm+0x1a/0x30 Freed by task 926: kfree+0x18f/0x4a0 tb_cfg_request_put+0xb7/0xe0 [thunderbolt] tb_cfg_request_work+0x82/0x120 [thunderbolt] process_one_work+0x675/0x1230 worker_thread+0x5e6/0xf70 kthread+0x365/0x470 ret_from_fork+0x54d/0x710 ret_from_fork_asm+0x1a/0x30 Second to last potentially related work creation: __queue_work+0x575/0xd00 queue_work_on+0x77/0x80 tb_cfg_request_cancel+0xc7/0x260 [thunderbolt] tb_cfg_request_sync+0x1f6/0x250 [thunderbolt] tb_cfg_read_raw+0x367/0x510 [thunderbolt] tb_cfg_read+0xec/0x240 [thunderbolt] tb_port_get_link_generation+0x258/0x420 [thunderbolt] tb_usb3_consumed_bandwidth+0x1c1/0x2c0 [thunderbolt] tb_tunnel_consumed_bandwidth+0xfd/0x910 [thunderbolt] tb_available_bandwidth+0x5f2/0xeb0 [thunderbolt] tb_recalc_estimated_bandwidth+0x2a0/0x1bc0 [thunderbolt] tb_handle_dp_bandwidth_request+0x1897/0x5e20 [thunderbolt] process_one_work+0x675/0x1230 worker_thread+0x5e6/0xf70 kthread+0x365/0x470 ret_from_fork+0x54d/0x710 ret_from_fork_asm+0x1a/0x30 The last stack trace is helpful because it shows that we are cancelling a request and looking at tb_cfg_request_cancel() what might happen is that tb_cfg_request_work() completes right before tb_cfg_request_cancel() starts and because of this it will call schedule_work() queueing the same work to run again. However, it is already removed from the request_queue and reference count is dropped so when tb_cfg_request_work() triggers again it will access memory that is already released. Fix this so that we first make sure a cancelled request is not handed away from tb_cfg_request_find() or scheduled to run. Then instead of relying on the worker to clean up the request we will do it in tb_cfg_request_cancel() after the work is canceled from running. Make tb_cfg_request_dequeue() release the request only if it was actually removed from the queue. | ||||