Export limit exceeded: 27747 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (27747 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64018 | 1 Linux | 1 Linux Kernel | 2026-10-13 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: mana: validate rx_req_idx to prevent out-of-bounds array access In mana_hwc_rx_event_handler(), rx_req_idx is derived from sge->address in DMA-coherent memory. In Confidential VMs (SEV-SNP/TDX), this memory is shared unencrypted and HW can modify WQE contents at any time. No bounds check exists on rx_req_idx, which can lead to an out-of-bounds access into reqs[]. Add bounds check on rx_req_idx in mana_hwc_rx_event_handler() before using it to index the reqs[] array. | ||||
| CVE-2026-64014 | 1 Linux | 1 Linux Kernel | 2026-10-13 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: usbtouchscreen - clamp NEXIO data_len/x_len to URB buffer size nexio_read_data() pulls data_len and x_len from a packed __be16 header in the device's interrupt packet and then walks packet->data[0..x_len) and packet->data[x_len..data_len) comparing each byte against a threshold. Both fields are 16-bit on the wire (max 65535). The existing adjustments shave at most 0x100 / 0x80 off, so the loop bound can still reach roughly 0xfeff. The URB transfer buffer for NEXIO is rept_size (1024) bytes from usb_alloc_coherent(), with the first 7 occupied by the packed header — so packet->data[] has 1017 valid bytes. read_data() callbacks are not given urb->actual_length, and nothing else bounds the walk. A device that lies about its length can get a ~64 KiB out-of-bounds read past the coherent DMA allocation. The first index whose byte exceeds NEXIO_THRESHOLD lands in begin_x / begin_y and from there into the reported touch coordinates, so adjacent kernel memory contents leak to userspace as ABS_X / ABS_Y events. Far enough out, the read can also hit an unmapped page and fault. Fix this all by clamping data_len to the buffer's data[] capacity and x_len to data_len. | ||||
| CVE-2026-101023 | 1 Gitea | 1 Gitea | 2026-10-13 | 9.1 Critical |
| Gitea's OAuth2 token endpoint verified the signature and grant of a token submitted with the `refresh_token` grant type, but not that the token was a refresh token. An unexpired access token for the same OAuth2 application and grant could be exchanged for a new access token and refresh token. Whoever holds such an access token could keep access beyond the token's original lifetime. | ||||
| CVE-2026-107288 | 1 Pydantic | 2 Pydantic-ai, Pydantic Ai | 2026-10-13 | 3.7 Low |
| Pydantic AI is a Python agent framework for building applications and workflows with Generative AI. From 1.77.0 until 1.107.6 and 2.44.0, the local web_fetch_tool and the WebFetch local fallback compare blocked_domains entries with a URL hostname before both values are normalized to the form used by getaddrinfo. An attacker-influenced model can use an equivalent IDNA spelling, non-ASCII label separator, case variation, or trailing root label that resolves to a blocked host but does not match the configured string, causing the application to fetch that host with its own privileges. allowed_domains fails closed for unmatched spellings, and private-IP and cloud-metadata protections remain effective. This issue is fixed in versions 1.107.6 and 2.44.0. | ||||
| CVE-2026-107289 | 1 Pydantic | 2 Pydantic-ai, Pydantic Ai | 2026-10-13 | 6.8 Medium |
| Pydantic AI is a Python agent framework for building applications and workflows with Generative AI. From 1.56.0 until 1.107.6 and 2.44.0, applications that opt attacker-influenced URLs into local network access through FileUrl with force_download='allow-local' or web_fetch_tool with allow_local_urls=True can bypass the cloud-metadata blocklist by appending an IPv6 zone identifier to an IPv6 metadata address. IPv6Address equality and hashing include the zone identifier, so the blocklist comparison fails even though the network stack ignores the zone on a non-link-local destination and reaches the metadata service, potentially exposing cloud IAM credentials. The opt-in settings are disabled by default, and the issue requires an IPv6-enabled environment. This issue is fixed in versions 1.107.6 and 2.44.0. | ||||
| CVE-2026-83742 | 2 Wolfssh, Wolfssl | 2 Wolfssh, Wolfssh | 2026-10-13 | 8.8 High |
| Unsigned integer underflow in wstrncat() in src/port.c in wolfSSL wolfSSH from v1.4.11 through v1.5.0 on non-Windows platforms allows an authenticated remote attacker to write one out-of-bounds null byte past the end of a stack buffer by sending a crafted SFTP path. wolfSSH_RealPath() in src/ssh.c appends each path component with a remaining-size bound (outSz - curSz) rather than the full destination size, so once the accumulated path reaches half the output buffer the size_t computation n - strlen(s1) - 1 wraps to near SIZE_MAX. The strncat() call is then effectively unbounded and copies the whole component; when that component exactly fills the remainder of the buffer, its terminating null is written one byte past the end. The caller's own length check keeps the copied data inside the buffer, so the overflow is limited to that single null byte, which may corrupt an adjacent stack value and crash the process. Applications that call the public wolfSSH_RealPath() with an output buffer smaller than the input path are additionally exposed to an unbounded copy, because the word32 expression outSz - segSz in that length check also wraps. | ||||
| CVE-2026-107211 | 2 Excelize, Qax-os | 2 Excelize, Excelize | 2026-10-13 | 5.5 Medium |
| Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. From 2.8.1 to 2.11.0, separately parsed pivot-table field indices are used to index the pivot-cache field-name slice without bounds checks. extractPivotTableFields uses getPivotCacheFieldsName output while processing GetPivotTables and trusts the dataField fld attribute as an index. When a crafted workbook supplies a pivot-field count mismatch or an out-of-range dataField fld value before GetPivotTables is called, the unchecked index causes a Go slice-bounds panic that escapes the library, allowing an attacker to crash the process or request worker. No fixed version is available as of this review. | ||||
| CVE-2026-107217 | 2 Excelize, Qax-os | 2 Excelize, Excelize | 2026-10-13 | 7.5 High |
| Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. From 2.0.0 to 2.11.0 in github.com/xuri/excelize/v2 and from 1.1.0 to 1.4.1 in github.com/xuri/excelize, ColumnNameToNumber accumulates a bijective base-26 value in int64 without detecting overflow, allowing an invalid long column name to wrap to zero with no error. ColumnNameToNumber accepts the overflowing name VGWQHXLSDVIKWV, after which checkSheetR0 and xlsxWorksheet.checkRow use the wrapped column value as an index. When a crafted worksheet uses an overflowing column name in a row normalized by checkSheetR0 or checkRow, the wrapped zero column becomes a negative slice index during worksheet normalization, allowing an attacker to panic and terminate the calling process. No fixed version is available as of this review. | ||||
| CVE-2026-107218 | 2 Excelize, Qax-os | 2 Excelize, Excelize | 2026-10-13 | 5.3 Medium |
| Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. From 2.10.1 to 2.11.0, RIGHT validates the requested length with UTF-16 code-unit counts but slices a rune array using Unicode code-point counts. RIGHT reaches leftRight through CalcCellValue, where countUTF16String validates one unit but utf8.RuneCountInString supplies the slice index in another. When RIGHT evaluates supplementary-plane text with a requested character count between the rune count and UTF-16 code-unit count, the inconsistent units produce a negative rune-slice index, allowing an attacker to panic during formula evaluation. No fixed version is available as of this review. | ||||
| CVE-2026-107220 | 2 Excelize, Qax-os | 2 Excelize, Excelize | 2026-10-13 | 6.5 Medium |
| Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. From 2.7.1 to 2.11.0, mergeCellsParser leaves the cached rectangle empty for an empty mergeCell ref and then passes that empty slice to cellInRange without a length check. GetCellValue reaches mergeCellsParser, which passes an empty rectangle derived from the mergeCell ref attribute into cellInRange. When a crafted worksheet contains an empty mergeCell ref and a non-streaming cell API reads the worksheet, cellInRange indexes four positions in an empty slice, allowing an attacker to panic on the first affected cell operation. No fixed version is available as of this review. | ||||
| CVE-2026-107222 | 2 Excelize, Qax-os | 2 Excelize, Excelize | 2026-10-13 | 6.5 Medium |
| Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. From 2.7.0 to 2.11.0, conditional-format extraction indexes required child slices or dereferences an optional colorScale child without validating malformed rule structure. GetConditionalFormats reaches extractCondFmtCellIs and also indexes ColorScale.Cfvo, DataBar.Cfvo, and DataBar.Color without complete structural checks. When a crafted worksheet supplies a cellIs, dataBar, or colorScale rule missing expected children and the application calls GetConditionalFormats, missing formula, color, value-object, or colorScale data reaches an out-of-range index or nil dereference, allowing an attacker to panic and terminate an unprotected process. No fixed version is available as of this review. | ||||
| CVE-2026-74045 | 1 Wazuh | 1 Wazuh | 2026-10-13 | 7.1 High |
| Wazuh from 3.12.0 before 4.14.8 contains a heap buffer overflow in fim_generate_alert() where full_log is sized from input but written bounded by OS_MAXSTR. An enrolled agent can send a crafted FIM syscheck event to corrupt manager heap memory and deterministically crash wazuh-analysisd, causing a fleet-wide detection outage. | ||||
| CVE-2026-53922 | 1 Openwrt | 2 Odhcpd, Openwrt | 2026-10-13 | 6.5 Medium |
| odhcpd is the DHCPv6, DHCPv4, and router-advertisement server used by OpenWrt. In commit cfddd56 and earlier, an unauthenticated host on the same link can first obtain two bindings through normal DHCPv6 SOLICIT and REQUEST exchanges and then send a crafted RENEW containing multiple IA_NA options. An earlier matched IA consumes most of the response buffer, an unmatched IA causes the build_ia() status branch to write and return a NOBINDING response larger than the remaining space, and a subsequent matched IA is processed after dhcpv6_ia_handle_IAs() subtracts that over-return from an unsigned size_t. The resulting underflow disables subsequent length checks and permits attacker-controlled IA_ADDR serialization beyond the 512-byte stack buffer pdbuf in handle_client_request(). The stack canary terminates odhcpd, and sustained packets can repeatedly disrupt DHCPv6 service while procd respawns the process. The observed configuration does not establish code execution. | ||||
| CVE-2026-109950 | 1 Freerdp | 1 Freerdp | 2026-10-13 | 4.3 Medium |
| FreeRDP from 3.0.0 before 3.32.0 contains a heap out-of-bounds read vulnerability that allows a malicious RD Gateway to crash clients by sending mismatched message lengths. Attackers controlling the gateway can set MsgBytes far larger than the NDR string ActualCount in consent or service messages, causing UTF-8 conversion to read past the stream allocation and disrupt client availability. | ||||
| CVE-2026-108960 | 1 Tiiny-ai | 1 Powerinfer | 2026-10-13 | 5.3 Medium |
| A vulnerability was detected in Tiiny-AI PowerInfer up to 8bd56d69906c9d2dba4d3bf6899763401e01a9a4. Affected is the function create_striped_mat_to_gpu of the file smallthinker/ggml/src/ggml-cuda/ggml-cuda.cu of the component FFN GPU-split Loader. The manipulation results in out-of-bounds read. The attack needs to be approached locally. The exploit is now public and may be used. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. The pull request to fix this issue awaits acceptance. | ||||
| CVE-2026-87679 | 2 Broadcom, Brocade | 2 Fabric Operating System, Fabric Os | 2026-10-13 | 7.2 High |
| When Brocade Fabric OS versions before 10.0.1 processes trunk configuration operations, the application parses user-supplied list strings into dynamically allocated heap arrays without enforcing boundary checks on the maximum allowable number of elements. An authenticated administrator can exploit this vulnerability via crafted REST API requests containing an excessive number of list delimiters, causing heap corruption that can result in service crash or arbitrary code execution. | ||||
| CVE-2026-109951 | 1 Freerdp | 1 Freerdp | 2026-10-13 | 5.3 Medium |
| FreeRDP 3.17.1 before 3.32.0 contains a heap buffer over-read vulnerability in DynvcTrackerHandleCreateBack of the freerdp-proxy DRDYNVC channel handler that allows malicious backend RDP servers to read heap memory out of bounds. Attackers can send a CREATE_REQUEST_PDU whose channel name lacks a NUL byte, causing an unbounded snprintf read that leaks memory into proxy logs or crashes the process. | ||||
| CVE-2026-102075 | 2026-10-13 | 7.5 High | ||
| A vulnerability has been identified in APOGEE MBC (PPC) (BACnet) (All versions), APOGEE MBC (PPC) (P2 Ethernet) (All versions), APOGEE MEC (PPC) (BACnet) (All versions), APOGEE MEC (PPC) (P2 Ethernet) (All versions), APOGEE PXC Compact (BACnet) (All versions < V3.5.7), APOGEE PXC Compact (P2 Ethernet) (All versions < V2.8.21), APOGEE PXC Modular (BACnet) (All versions < V3.5.7), APOGEE PXC Modular (P2 Ethernet) (All versions < V2.8.21), TALON TC Compact (BACnet) (All versions < V3.5.7), TALON TC Modular (BACnet) (All versions < V3.5.7). The affected product web service does not properly validate user input in multipart handling. This could allow an unauthenticated remote attacker to cause a denial of service. | ||||
| CVE-2026-107225 | 2 Excelize, Qax-os | 2 Excelize, Excelize | 2026-10-13 | 6.5 Medium |
| Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. From 2.8.0 to 2.11.0, GetStyle's fill, border, and font extraction predicates check only upper bounds for attacker-controlled style-table indices. File.GetStyle relies on extractStyleCondFuncs predicates that allow negative FillID, BorderID, and FontID values to reach slice indexing. When a crafted styles.xml supplies a negative fillId, borderId, or fontId and the application reads the style, a negative identifier passes the upper-bound-only predicate and becomes a negative slice index, allowing an attacker to panic while reading cell styling. No fixed version is available as of this review. | ||||
| CVE-2026-96266 | 1 Ibm | 1 Powervm Hypervisor | 2026-10-13 | 8.2 High |
| IBM Power Systems Firmware FW1060.00 through FW1060.81 is affected by a vulnerability in host firmware configuration parsing. An attacker with authenticated service-level access to the FSP can write specially crafted configuration data to cause memory corruption in the host firmware boot stage during system IPL, compromising the host firmware boot stack and the hypervisor subsequently loaded by it. Successful exploitation results in a confidentiality, integrity, and availability impact to the managed system. | ||||