Export limit exceeded: 409398 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 105111 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (105111 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68353 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: fix OOB read from firmware num_msg in TX complete handler The firmware-controlled num_msg field (u8, 0-255) drives the loop in ath6kl_wmi_tx_complete_event_rx() without validation against the buffer length. This allows out-of-bounds reads of up to 1020 bytes past the WMI event buffer when the firmware sends an inflated num_msg. Add a check that the buffer is large enough to hold the fixed struct and the num_msg variable-length entries. | ||||
| CVE-2026-68348 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: tas2781: bound firmware description string parsing The TAS2781 firmware parser reads several variable-length description strings with strlen() before checking that the string terminator is present inside the firmware blob. A malformed firmware image without a NUL terminator can therefore make the parser walk past the end of the firmware buffer before the later size checks run. Add a small bounded string-length helper and use it for all description fields that are parsed from the firmware buffer. Keep the existing size checks for the fixed bytes that follow each string. | ||||
| CVE-2026-68335 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rds: drop incoming messages that cross network namespace boundaries rds_find_bound() looks up the destination socket using a global rhashtable keyed solely on (addr, port, scope_id). Network namespaces are not part of the key, so a sender in netns A can deliver an incoming message (inc) to a socket that lives in a different netns B. When this happens, inc->i_conn points to an rds_connection whose c_net is netns A, but the receiving rs lives in netns B. Once the child process that created netns A exits, cleanup_net() calls rds_loop_exit_net() -> rds_loop_kill_conns() -> rds_conn_destroy(), freeing that connection. If the survivor socket in netns B still holds the inc, any subsequent dereference of inc->i_conn is a use-after-free. There are two dangerous sites in rds_clear_recv_queue(): 1. inc->i_conn->c_lcong (offset 88 of freed rds_connection, size 200) read via rds_recv_rcvbuf_delta() -- confirmed by KASAN. 2. inc->i_conn->c_trans->inc_free(inc) (function pointer at offset 80) called via rds_inc_put() when the inc refcount reaches zero -- same race window, potential call-through-freed-object primitive. The bug is reachable from unprivileged user namespaces (CLONE_NEWUSER + CLONE_NEWNET), available since Linux 3.8. Fix this by rejecting the delivery in rds_recv_incoming() when the socket returned by rds_find_bound() belongs to a different network namespace than the connection that carried the message. Use the existing rds_conn_net() / sock_net() helpers and net_eq() for the comparison. | ||||
| CVE-2026-68329 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Wait for completion instead of returning early in iommu_completion_wait() need_sync is a per-IOMMU flag shared by all domains and devices behind that IOMMU. It is set whenever a command is queued with sync == true and cleared when a completion-wait (CWAIT) command is queued. However, a cleared need_sync only means that a covering CWAIT has been queued, not that all previously queued commands have actually completed in hardware. iommu_completion_wait() read need_sync locklessly and returned early when it was false. This breaks the "block until all previously queued commands have completed" contract in a multi-CPU scenario: CPU2: queue inv-B => need_sync = true CPU1: queue CWAIT(N); need_sync = false; then wait_on_sem(N) CPU2: read need_sync == false => return 0 (no wait!) CPU2 returns without waiting for any sequence number even though its inv-B may not have completed yet (CWAIT(N), queued after inv-B, has not been signaled). CPU2 then proceeds to, for example, free page-table pages while the IOMMU can still walk stale translations, opening a use-after-free window. This is a logical race in the meaning of the flag, not a memory-visibility issue, so barriers alone do not help. Fix it without losing the optimization of avoiding redundant CWAIT commands: take iommu->lock before testing need_sync, and when it is false do not return early but wait for the last allocated sequence number (cmd_sem_val). Since need_sync == false implies no sync command was queued after the last CWAIT, that CWAIT is FIFO-ordered after every not-yet-completed command, so waiting for its sequence number guarantees all prior commands (possibly queued by another CPU) have completed. The common path with pending work is unchanged and no extra hardware command is issued. | ||||
| CVE-2026-68326 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: bound uAP association event IEs to the event buffer mwifiex_process_uap_event() handles EVENT_UAP_STA_ASSOC by exposing the (re)association request IEs that the firmware copies into the event: sinfo->assoc_req_ies = &event->data[len]; len = (u8 *)sinfo->assoc_req_ies - (u8 *)&event->frame_control; sinfo->assoc_req_ies_len = le16_to_cpu(event->len) - (u16)len; event->len is supplied by the device firmware and is never validated, and the subtraction is unchecked. assoc_req_ies points into adapter->event_body[MAX_EVENT_SIZE], a fixed-size array embedded in the kmalloc()'d struct mwifiex_adapter. On the ap_11n_enabled path mwifiex_set_sta_ht_cap() walks these IEs with cfg80211_find_ie(), whose for_each_element() loop dereferences each element header. A firmware-reported event->len larger than the bytes actually received makes assoc_req_ies_len describe IEs that extend past event_body, so the walk reads out of the adapter slab object, a slab-out-of-bounds read (KASAN: slab-out-of-bounds in cfg80211_find_ie). An event->len smaller than the header instead makes the int subtraction negative, which wraps to a huge size_t when stored in assoc_req_ies_len. The same length is handed to cfg80211_new_sta(), so a more modest over-claim can also copy stale event_body bytes into the NL80211_CMD_NEW_STATION notification. A malicious or malfunctioning mwifiex device (USB/SDIO/PCIe) can deliver such an event while the interface is in AP/uAP mode. Validate event->len before use: reject a length that underflows the header or that would place the IEs outside the event_body[] buffer the event was copied into. event->len here is struct mwifiex_assoc_event.len, a payload field internal to this event, not the transport frame length, so it is validated in this handler rather than at the generic MWIFIEX_TYPE_EVENT receive path, which only sees the event cause and the transport frame length. The bound is against event_body[MAX_EVENT_SIZE] rather than the actually-received length because the transports store the event differently (USB and SDIO leave the 4-byte event header in event_skb, PCIe strips it via skb_pull), whereas event_body is the single fixed buffer all of them copy the event into. This is the event-path analogue of the receive-path bounds checks added in commit 119585281617 ("wifi: mwifiex: Fix OOB and integer underflow when rx packets"). | ||||
| CVE-2026-68323 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: serialize udp bearer replicast list updates tipc_udp_rcast_add() and cleanup_bearer() both update ub->rcast.list with list_add_rcu() / list_del_rcu(), but nothing serializes them. The add runs from the encap receive softirq (via tipc_udp_rcast_disc()) without rtnl_lock(), so it can race the cleanup delete and corrupt the list: list_del corruption. prev->next should be ffff8880298d7ab8, but was ffff88802449ad38. (prev=ffff888027e3ec98) kernel BUG at lib/list_debug.c:62! RIP: __list_del_entry_valid_or_report+0x17a/0x200 Workqueue: events cleanup_bearer Call Trace: cleanup_bearer (net/tipc/udp_media.c:811) process_one_work (kernel/workqueue.c:3302) worker_thread (kernel/workqueue.c:3466) The bearer can be enabled from an unprivileged user namespace, as the TIPCv2 generic-netlink ops carry no GENL_ADMIN_PERM. Add a spinlock to struct udp_bearer and take it around the list_add_rcu() in tipc_udp_rcast_add() and the list_del_rcu() loop in cleanup_bearer() so the two writers can no longer corrupt the list. Reject a duplicate peer under the same lock before allocating, and remove tipc_udp_is_known_peer(). The old lockless pre-check in tipc_udp_rcast_disc() was racy: two softirqs discovering the same peer could both find it absent and add it twice. cleanup_bearer() runs from a workqueue after tipc_udp_disable() clears the bearer's up bit, so an encap softirq can still reach tipc_udp_rcast_add() and add a peer after cleanup_bearer() has already emptied the list, leaking that entry when the bearer is freed. Mark the bearer disabled under rcast_lock once the list is emptied and refuse further additions. | ||||
| CVE-2026-68305 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/vf: Add drm_dev guards when detaching CCS read/write buffers CCS read/write buffers are freed during BO destruction. In some cases, BOs may be destroyed after the device is unbound but while the DRM structure remains valid, leading to NULL pointer dereferences when accessing device resources. BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 9376 Comm: xe_pat Not tainted 7.2.0-rc2+ #1 PREEMPT(lazy) RIP: 0010:xe_sriov_vf_ccs_rw_update_bb_addr+0x4d/0xa0 [xe] RSP: 0018:ffffcf304110b9c8 EFLAGS: 00010246 RAX: ffff8a85c38a0a00 RBX: 00000000810ef000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8a85c39c1888 RBP: ffffcf304110b9e8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a85c39c1888 R13: 0000000000000000 R14: ffff8a85c39b4f28 R15: ffff8a85c3885000 FS: 0000000000000000(0000) GS:ffff8a878b809000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000010314a002 CR4: 0000000000772ef0 PKRU: 55555554 Call Trace: <TASK> xe_migrate_ccs_rw_copy_clear+0x98/0x120 [xe] xe_sriov_vf_ccs_detach_bo+0x2c/0x60 [xe] xe_ttm_bo_delete_mem_notify+0xc8/0xe0 [xe] ttm_bo_cleanup_memtype_use+0x26/0x80 [ttm] ttm_bo_release+0x29e/0x2d0 [ttm] ttm_bo_fini+0x39/0x70 [ttm] xe_gem_object_free+0x1f/0x30 [xe] drm_gem_object_free+0x1d/0x40 ttm_bo_vm_close+0x5f/0x90 [ttm] remove_vma+0x2c/0x70 tear_down_vmas+0x63/0xf0 exit_mmap+0x20d/0x3f0 __mmput+0x45/0x170 mmput+0x31/0x40 do_exit+0x2ba/0xac0 do_group_exit+0x2d/0xb0 __x64_sys_exit_group+0x18/0x20 x64_sys_call+0x14a0/0x2390 do_syscall_64+0xdd/0x640 ? count_memcg_events+0xea/0x240 ? handle_mm_fault+0x1ec/0x2f0 (cherry picked from commit 1ae415a6eefe5004954a1d352b1718faca8844ef) | ||||
| CVE-2026-68298 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/vm: Fix SVM leak on resv obj alloc failure in xe_vm_create() Commit 9e9787414882 ("drm/xe/userptr: replace xe_hmm with gpusvm") made xe_svm_init() unconditional in xe_vm_create() and extended it to also initialize a "simple" gpusvm state for non-fault-mode VMs. The matching xe_svm_fini() call in xe_vm_close_and_put() was updated to run unconditionally, but the error unwind path in xe_vm_create() was not. On the drm_gpuvm_resv_object_alloc() failure path, xe_svm_init() has already succeeded but xe_svm_fini() is only called when XE_VM_FLAG_FAULT_MODE is set. For non-fault-mode VMs this leaves vm->svm.gpusvm partially initialized and leaks the resources allocated by drm_gpusvm_init(). For fault-mode VMs, xe_svm_init() additionally acquires the pagemap owner via drm_pagemap_acquire_owner() and the pagemaps via xe_svm_get_pagemaps(). Those resources are released by xe_svm_close(), not xe_svm_fini(). On the same error path, xe_svm_close() is not called either, so fault-mode VMs leak the pagemap owner and pagemaps. Fix both leaks: - Call xe_svm_fini() unconditionally on the err_svm_fini path, matching the unconditional xe_svm_init() call. Move the vm->size = 0 assignment out of the conditional so the xe_vm_is_closed() assert in xe_svm_fini() (and xe_svm_close()) holds for both modes. - Call xe_svm_close() for fault-mode VMs before xe_svm_fini(), matching the ordering used in xe_vm_close_and_put(). (cherry picked from commit ca2a3587d577ba764e0fe628fb676244fc33ddd4) | ||||
| CVE-2026-68294 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: qrtr: restrict socket creation to the initial network namespace QRTR keeps its entire port and node state in module-global variables that are not partitioned per network namespace: qrtr_local_nid is a single global node id (always 1) and qrtr_ports is a single global xarray. qrtr_port_lookup() and qrtr_local_enqueue() operate on that global state with no network-namespace check, and qrtr_create() places no restriction on the namespace a socket is created in. As a result an unprivileged process that creates an AF_QIPCRTR socket in a separate network namespace, e.g. via unshare(CLONE_NEWUSER | CLONE_NEWNET), can send QRTR datagrams - including control-plane messages such as QRTR_TYPE_NEW_SERVER - to QRTR sockets owned by another namespace, and vice versa. The receiving socket sees such a message as coming from node id 1, indistinguishable from a legitimate local client, breaking the isolation that network namespaces are expected to provide. QRTR is a transport to global hardware endpoints (the modem and other remote processors) and has no per-namespace semantics; its in-kernel name service already creates its socket in init_net only. Confine the socket family to the initial network namespace, as other non-namespace-aware socket families do (see llc_ui_create() and the ieee802154 socket code). | ||||
| CVE-2026-68290 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rds: tcp: unregister sysctl before tearing down listen socket rds_tcp_exit_net() frees the per-netns RDS TCP listen socket via rds_tcp_kill_sock() before unregistering the per-netns sysctl table. Since rds_tcp_skbuf_handler() derives the netns from rtn->rds_tcp_listen_sock->sk, a concurrent sysctl write can race with netns teardown and dereference the freed socket/sk. KASAN reports the race as: BUG: KASAN: slab-use-after-free in rds_tcp_skbuf_handler+0x2aa/0x2e0 rds_tcp_skbuf_handler net/rds/tcp.c:721 proc_sys_call_handler fs/proc/proc_sysctl.c vfs_write fs/read_write.c __x64_sys_pwrite64 fs/read_write.c Fix this by unregistering the RDS TCP sysctl table before calling rds_tcp_kill_sock(). unregister_net_sysctl_table() prevents new sysctl handlers from starting and waits for in-flight handlers to finish, so the listen socket can then be released safely. The fix was tested against the linked reproducer. | ||||
| CVE-2026-68287 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: drop_monitor: fix size calculations for 64-bit attributes net_dm_packet_report_fill() and net_dm_hw_packet_report_fill() use nla_put_u64_64bit() to append 64-bit attributes (NET_DM_ATTR_PC and NET_DM_ATTR_TIMESTAMP). On 32-bit architectures without CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS, nla_put_u64_64bit() may append a 4-byte NET_DM_ATTR_PAD attribute for 64-bit alignment. However, net_dm_packet_report_size() and net_dm_hw_packet_report_size() used nla_total_size(sizeof(u64)) instead of nla_total_size_64bit(sizeof(u64)), budgeting 12 bytes instead of up to 16 bytes. This under-estimation of SKB size can lead to an skb_over_panic() when __nla_reserve() or skb_put() is subsequently called. Fix this by using nla_total_size_64bit(sizeof(u64)) in both size calculations. | ||||
| CVE-2026-68284 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix cork use-after-free in tcp_bpf_sendmsg() tcp_bpf_sendmsg() keeps msg_tx across sk_stream_wait_memory(), which drops and reacquires the socket lock. Its error path tries to decide whether msg_tx names the local temporary message by comparing it with the current value of psock->cork. This comparison is unsafe when two threads send on the same socket: Thread A Thread B msg_tx = psock->cork sk_msg_alloc() fails sk_stream_wait_memory() releases the socket lock acquires the socket lock completes the cork psock->cork = NULL frees the cork reacquires the socket lock msg_tx != psock->cork sk_msg_free(msg_tx) The stale cork is therefore mistaken for the local temporary message and freed again. KASAN reported: BUG: KASAN: slab-use-after-free in sk_msg_free+0x49/0x50 Read of size 4 at addr ffff88810c908800 by task poc/90 Call Trace: sk_msg_free+0x49/0x50 tcp_bpf_sendmsg+0x14f5/0x1cc0 __sys_sendto+0x32c/0x3a0 __x64_sys_sendto+0xdb/0x1b0 Allocated by task 89: __kasan_kmalloc+0x8f/0xa0 tcp_bpf_sendmsg+0x16b3/0x1cc0 Freed by task 91: __kasan_slab_free+0x43/0x70 kfree+0x131/0x3c0 tcp_bpf_sendmsg+0xec3/0x1cc0 msg_tx can only name the stack-local tmp or the shared cork. Check for tmp directly so a changed psock->cork cannot turn a shared message into an apparent local one. | ||||
| CVE-2026-68274 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Fix buffer overflow in steered register list allocation The size calculation for the steered register extarray uses only the geometry DSS mask (g_dss_mask) to determine the number of entries to allocate: total = bitmap_weight(gt->fuse_topo.g_dss_mask, ...) * steer_reg_num; However, the filling loop uses for_each_dss_steering(), which iterates over for_each_dss(), defined as the union of g_dss_mask and c_dss_mask (geometry + compute DSS). On platforms with compute-only DSS bits, the loop writes past the allocated buffer, corrupting adjacent slab objects. This manifests as list_del corruption and SLUB redzone overwrites during drm_managed_release on device unbind, since the overflow corrupts the drmres list_head of neighboring allocations. Fix by computing the allocation size using the union of both DSS masks, matching the iteration pattern of for_each_dss_steering(). -- v2: - use bitmap_weighted_or() (Zhanjun) (cherry picked from commit 0a78a44f4901aa6c9263e66be7fce02282f1109f) | ||||
| CVE-2026-68273 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix context pstate override handling There are several problems in the context pstate handling code. The most serious ones are potential use-after-free and NULL pointer dereferences at context initialization time. Both are due amdgpu_ctx_init() not holding the adev->pm.stable_pstate_ctx_lock, which is otherwise used from both sysfs and the context code itself for modifying and clearing the stored context pointer. Second issue is that context fini can trample over the pstate configuration set via sysfs. This is due the restore state (ctx->stable_pstate) being saved at context init time, and not if, or when the context actually changes the pstate. As the context exits it will therefore incorrectly restore to what was set before the sysfs override was requested. The simplest fix is to drastically simplify how the state is tracked, by clearly defining the points at which pstate ownership is taken and released, and to handle all transitions under the correct lock. Instead of at context init time, the previous state is saved only at the point the context overrides the current state, and is restored on context exit only if the context is still the owner of the current override state. (cherry picked from commit 1b5e413713c0a93bc1818394d0ce49aaad21bd27) | ||||
| CVE-2026-68265 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/vm: Fix BO prefetch with CONSULT_MEM_ADVISE_PREF_LOC When prefetch region is DRM_XE_CONSULT_MEM_ADVISE_PREF_LOC for a BO VMA, the code used it as an index into region_to_mem_type[], causing an out-of-bounds access since the value is -1. Resolve the preferred location for BO VMAs directly: local VRAM on dGFX (using the BO's tile placement) or system memory on iGPU. Discovered using AI-assisted static analysis confirmed by Intel Product Security. v2: -Fix null dereference (cherry picked from commit d9a4906ac03be9f6ed3f3b45c56c866b867fd75b) | ||||
| CVE-2026-68245 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix lifetime issue of amdgpu_vm_get_task_info_pasid() The vm pointer returned from amdgpu_vm_get_vm_from_pasid() is only valid while the lock is still being held. Once xa_unlock_irqrestore is called and returned, the pointer is no longer under lock and is subject to modification. Since, the caller still dereferences vm->task_info in amdgpu_vm_get_task_info_vm() after the lock is removed, this causes a use after unlock problem. Remove the lifetime issue present in amdgpu_vm_get_task_info_pasid() through removing the amdgpu_vm_get_vm_from_pasid() function from amdgpu_vm.c and making the relevant code inline to hold the lock while it is still in use. (cherry picked from commit 9d01579f3f868b333acc901815972685989092c7) | ||||
| CVE-2026-68240 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/gpusvm: publish dpagemap early to avoid device mapping leak on error drm_gpusvm_get_pages() only stored the local dpagemap into svm_pages->dpagemap on the success path. If a later page failed (e.g. -EOPNOTSUPP when ctx->allow_mixed is false) and jumped to err_unmap, svm_pages->dpagemap was still NULL, so __drm_gpusvm_unmap_pages() skipped device_unmap() and leaked the device mappings already created. Assign svm_pages->dpagemap when the first device page is mapped so the err_unmap path can device_unmap() those mappings. This issue was found by Sashiko AI review. | ||||
| CVE-2026-68216 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: pwc: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. pwc's start_streaming() had two early returns that hit this trap: -ENODEV when the USB device was already disconnected, and -ERESTARTSYS when mutex_lock_interruptible() was interrupted by a signal. Call the existing pwc_cleanup_queued_bufs() helper with VB2_BUF_STATE_QUEUED before returning (matching the state already used by the pwc_isoc_init() error path in the same function). This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo: Return queued buffers on start_streaming() failure"). | ||||
| CVE-2026-68206 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-ctrls: validate HEVC active reference counts HEVC slice parameters are shared stateless V4L2 controls, but the common validation path does not verify the active L0/L1 reference counts before driver-specific code consumes them. The original report came from Cedrus, but the active count bounds are not Cedrus-specific. Validate them in the common HEVC slice control path so stateless HEVC drivers get the same basic guarantees as soon as the control is queued. Do not reject ref_idx_l0/ref_idx_l1 entries here. Existing userspace may use out-of-range sentinel values such as 0xff for missing references, and some hardware can use that information for concealment. Keep this common check limited to the active reference counts. | ||||
| CVE-2026-68202 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: close a re-opened queue timer in the destructor queue_delete() closes the queue timer, then frees it. snd_seq_timer_close() clears q->timer->timeri. snd_use_lock_sync() then drains borrowers, and snd_seq_timer_delete() frees q->timer. A borrower can re-open the timer inside that window. A SET_QUEUE_CLIENT that took a queueptr() use_lock reference before the queue was unlinked runs snd_seq_timer_open() after the close. Open refuses re-open only while timeri is set, and the close just cleared it, so it re-opens timeri. snd_seq_timer_delete() does not close that instance. Its snd_seq_timer_stop() is a no-op, because running was cleared first. So it frees q->timer with the instance still live. The queue is freed next. The instance stays on the global timer with callback_data pointing at the freed queue. A non-owner START on the unlocked queue arms it. The next tick derefs the freed queue in snd_seq_timer_interrupt(). Reachable by an unprivileged user with access to /dev/snd/seq. No CAP and no queue ownership required. Close any lingering instance in the destructor. There, ->timeri can no longer change: the queue is unlinked and all use_lock borrowers have drained, so no snd_seq_queue_use() can re-open it. Close it before clearing q->timer. snd_timer_close() waits for any in-flight snd_seq_timer_interrupt() to finish, and that callback still reads q->timer (via snd_seq_check_queue()), so q->timer must stay valid until it drains. | ||||