Export limit exceeded: 408578 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (408578 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90167 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: serialize oplock close with pending break ownership close may abort an in-flight oplock break while another breaker already holds an opinfo reference. Releasing pending_break wakes that waiter, but without serializing the close transition with bit acquisition it can become a new break owner through the test_and_set_bit() fast path. It can then overwrite OPLOCK_CLOSING with OPLOCK_ACK_WAIT and continue a break for a dying opinfo. Make OPLOCK_CLOSING terminal once the opinfo is removed from the inode list. Serialize that transition, pending_break acquisition, and OPLOCK_ACK_WAIT setup with an opinfo state lock. A breaker which loses the race releases its ownership and returns -ENOENT. Explicitly wake pending_break waiters during close so they can observe the terminal state. Also prevent ACK and timeout paths from replacing OPLOCK_CLOSING with OPLOCK_STATE_NONE. | ||||
| CVE-2026-90162 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: defer publishing granted locks to prevent UAF/double-free race In smb2_lock(), mid-batch granted locks are published to connection-wide (conn->lock_list) and file-wide (fp->lock_list) lists immediately upon vfs_lock_file() success, while also remaining tracked on the stack-local rollback_list. If a subsequent element in the same SMB2_LOCK request array fails validation or execution, the thread jumps to out: and walks rollback_list to undo previously granted locks. However, because the granted lock was already published to conn->lock_list, a concurrent UNLOCK request on the same connection can find the lock object and kfree() it before the rollback loop executes. When the granting thread subsequently walks rollback_list, it dereferences and frees the already-freed ksmbd_lock structure, resulting in a Use-After-Free and Double-Free (on both ksmbd_lock and struct file_lock). Fix this by deferring the publication of granted locks to conn->lock_list and fp->lock_list until after the entire array of lock elements has been processed without error. Mid-batch grants remain tracked exclusively on the request-local rollback_list until the whole batch succeeds, eliminating the race window. | ||||
| CVE-2026-90156 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: safely discard unregistered deferred locks When vfs_lock_file() defers a lock, smb2_lock() puts its ksmbd_lock on rollback_list before allocating and registering the asynchronous work. If either operation fails, rollback assumes that smb_lock->conn is initialized and dereferences NULL. The deferred file_lock also remains linked into the VFS blocked-lock state while it is freed. Keep the lock off rollback_list until async setup succeeds. On setup failures, explicitly unblock and wake the deferred lock before freeing it and its ksmbd wrapper. | ||||
| CVE-2026-90155 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: detach blocked lock requests before freeing A file_lock retained by ksmbd for byte-range lock bookkeeping can still be part of the VFS blocked-request graph. In particular, the VFS can chain a new waiter below an already blocked request through flc_blocked_requests. The ksmbd_file reference count does not cover that graph. Both __ksmbd_close_fd() and the cross-request unlock path free these retained file_lock objects directly. If a dependent waiter is still attached, locks_release_private() hits BUG_ON(!list_empty(&flc->flc_blocked_requests)). The same lifetime mismatch can leave a freed ksmbd_lock reachable through its request-local llist. Detach the file_lock from the blocked-request graph before freeing it in the close, cross-request unlock, and rollback paths. locks_delete_block() also wakes requests chained below the object. Remove llist when a completed lock is published so a globally visible ksmbd_lock no longer points into the submitting worker's stack. | ||||
| CVE-2026-90154 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: scope session state changes to bound connections ksmbd_all_conn_set_status() treats every connection whose transient binding flag is set as belonging to the target SessionId. A logoff or session replacement can consequently move an unrelated connection to NEED_RECONNECT or NEED_SETUP. Pass the target session itself and select connections using either the connection-local session xarray or the session's permanent channel list. Use the same association test while waiting for requests to drain. Serialize session-wide status changes under request_lock and do not overwrite EXITING or RELEASING. Protect the shutdown transition with the same lock so a concurrent session update cannot revive a closing connection. | ||||
| CVE-2026-90146 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf, xdp: move offload check into dev_xdp_install() bpf_xdp_link_update() calls dev_xdp_install() directly and skips dev_xdp_attach(), so the checks in dev_xdp_attach() do not run. A user can make an XDP link with a normal program and then swap in an offloaded or device-bound program with BPF_LINK_UPDATE, which puts it on the software path. dev_xdp_install() is the one place all three paths go through: "ip link set xdp" and BPF_LINK_CREATE reach it via dev_xdp_attach(), and BPF_LINK_UPDATE calls it directly. So move the program checks (offloaded, bound to another device, device-bound in generic mode, native vs generic, DEVMAP and CPUMAP) there, and keep only the netlink-flag check (XDP_FLAGS_UPDATE_IF_NOEXIST) in dev_xdp_attach(). | ||||
| CVE-2026-90144 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dpll: fix NULL deref in dpll_device_ops() during teardown race When the last owner of a dpll device unregisters while a foreign driver still holds a pin on it via dpll_pin_on_pin_register(), the dpll object stays alive with an empty registration list. A pin notification queued before the unregister (e.g. ice reacting to zl3073x_i2c removal) then walks pin->dpll_refs into dpll_device_ops(), which trips the WARN_ON and dereferences the missing registration. dpll_lock cannot help because the notification work was queued before the unregistering driver took the lock. Treat the empty registration list as a legitimate transient state. Make dpll_priv() and dpll_device_ops() return NULL in that case and make every pin netlink path that resolves a device from a pin skip such dplls. dpll_cmd_pin_get_one() picks a ref with a live registration and returns -ENODEV when there is none, the pin dumpit skips such a pin instead of aborting the dump, dpll_msg_add_pin_dplls() and the frequency, esync, reference sync and phase adjust set paths skip dead refs, and dpll_pin_parent_device_set() validates the parent with dpll_device_get_by_id(). dpll_pin_register() is the last caller that dereferenced the device ops without a check, so move its frequency monitor validation under dpll_lock and tolerate a missing registration there as well. The empty registration list is equivalent to a cleared DPLL_REGISTERED mark, both transitions happen under dpll_lock in dpll_device_register() and dpll_device_unregister(). A pin notification for a pin whose dplls are all gone is now dropped with -ENODEV instead of crashing, all callers in the core ignore that return value. WARNING: drivers/dpll/dpll_core.c:1092 at dpll_device_ops+0x24/0x40, CPU#83: kworker/u576:3/23471 Modules linked in: ... ice ... zl3073x_i2c(-) ... zl3073x ... Workqueue: ice_dpll_wq ice_dpll_pin_notify_work [ice] RIP: 0010:dpll_device_ops+0x24/0x40 Call Trace: <TASK> dpll_cmd_pin_get_one+0x336/0x520 dpll_pin_event_send+0x82/0x140 dpll_pin_on_pin_unregister+0xbb/0x160 ice_dpll_pin_notify_work+0x1bc/0x1f0 [ice] process_one_work+0x19e/0x370 worker_thread+0x1a6/0x310 kthread+0xe4/0x120 ret_from_fork+0x1a1/0x270 ret_from_fork_asm+0x1a/0x30 </TASK> ---[ end trace 0000000000000000 ]--- BUG: kernel NULL pointer dereference, address: 0000000000000010 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page | ||||
| CVE-2026-90142 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: virtio_net: Fix resize of the RX ring When a AF_XDP socket is attached, the virtnet_rx_resize should resize the rq->xsk_buffs XSK buffer array. Otherwise, when the size grows, the virtnet_rx_resume() causes a write past the end of the array. This is easily reproducable with ethtool -G ens3 rx 32 ./xdpsock -i eth0 -q 0 -r -z & ethtool -G eth0 rx 256 | ||||
| CVE-2026-90121 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v5: Clear per-CPU IRS data on teardown IRS affinity setup publishes an IRS pointer and IAFFID state in the per-CPU data before the remaining IRS initialization can fail. The error path then frees the IRS data without clearing that published state, leaving CPUs associated with freed memory. On initialization failure and normal IRS teardown, clear the per-CPU IRS association by removing the stale pointer to irs_data. Also invalidate the per-CPU IAFFID state for any CPUs that were tied to the IRS before it was freed. | ||||
| CVE-2026-90111 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ip6mr: do not clone dst in ip6mr_cache_report() IPv6 input attaches a non-refcounted (NOREF) dst to skbs under RCU. When an ingress multicast packet misses MFC lookup, ip6mr_cache_unresolved() places the skb onto the unresolved queue, escaping the receive-side RCU grace period. If the underlying route is deleted and freed, and the MFC queue is later resolved with a wrong parent interface, ip6_mr_forward() invokes ip6mr_cache_report(..., MRT6MSG_WRONGMIF), which executes dst_clone(skb_dst(pkt)) on the freed dst entry, triggering a slab use-after-free. Report packets queued to mroute6_sk (a raw socket) and netlink notifications do not require an attached dst entry. Fix this by: 1. Removing dst_clone() in ip6mr_cache_report() and ensuring report skbs do not hold a dst. 2. Dropping skb_dst before queuing unresolved skbs in ip6mr_cache_unresolved(), matching the fact that multicast forwarding resolves outgoing routes anew via ip6_route_output(). | ||||
| CVE-2026-90106 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: arp/nd proxy: fix reading neigh ha Currently neigh ha address is read directly, but that can result in torn/partial reads if the neigh is being updated. Use neigh_ha_snapshot to take a stable snapshot of the address. | ||||
| CVE-2026-90105 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: fix reading neigh ha Currently arp/neigh_reduce read neigh ha directly which can lead to partial reads while the neigh is being updated. Use neigh_ha_snapshot to take a stable snapshot of the address similar to route_shortcircuit which already does the right thing. | ||||
| CVE-2026-90104 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4.1: zero referring call lists before decoding decode_cb_sequence_args() allocates csa_rclists with kmalloc_objs(), so each referring_call_list starts uninitialized. decode_rc_list() assigns rcl_refcalls only when rcl_nrefcalls is nonzero. A valid list with zero referring calls therefore leaves the pointer uninitialized, and nfs4_callback_sequence() later passes stale slab contents to kfree(). Allocate csa_rclists with kzalloc_objs() so every rcl_refcalls member is NULL from the beginning, including valid empty referring call lists. | ||||
| CVE-2026-90099 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: account classifier filter allocations to memcg Allocations in the tc classifier *_change() paths (filter objects, per-CPU counters, and per-filter aux data) use plain GFP_KERNEL without __GFP_ACCOUNT, allowing unprivileged users to pin kernel memory outside memcg charging. The shared tcf_exts_init_ex() action array allocation in cls_api.c was also uncharged; this patch closes it along with the per-classifier filter-object/percpu/aux allocations that remain unaccounted. Add GFP_KERNEL_ACCOUNT to: - the shared tcf_exts_init_ex() action array (cls_api.c), common to every filter of every classifier (32 pointers, 256 bytes); - the filter-object, per-CPU-counter, and per-filter aux allocations in cls_basic, cls_bpf, cls_cgroup, cls_flow, cls_flower, cls_fw, cls_matchall, cls_route and cls_u32; - the u32_init_knode() replace-path knode allocation (cls_u32.c), which allocates the same struct tc_u_knode + sel.keys on every replace of an existing knode and was missed by the create-path-only conversion. Also fix the cls_basic error path: basic_change() inserts fnew into the IDR before allocating the per-CPU counter. If alloc_percpu() fails the errout path kfree'd fnew without idr_remove, leaving a dangling pointer in the IDR. With GFP_KERNEL_ACCOUNT the percpu alloc becomes failable on demand (memcg at memory.max), making the dead path attacker-reachable and burning the handle permanently. Add the idr_remove on the percpu failure path, matching the basic_set_parms failure-path pattern. Note: vega@nebusec.ai provided a poc for basic_cls, but it was easy to extend to the other classifiers. Conditions to recreate the bug: - CONFIG_NET_SCHED, CONFIG_NET_CLS_* (the classifier being used), CONFIG_NET_CLS_ACT, CONFIG_MEMCG, CONFIG_USER_NS, CONFIG_NET_NS. - Unprivileged user in a fresh user+network namespace (unshare -Urn), or root with CAP_NET_ADMIN. - Create a large number of tc filters (e.g. tc filter add dev lo ingress ... <classifier> ...) while watching a memcg-limited cgroup: system slab grows far faster than memory.current, pinning kernel memory outside memcg charging. | ||||
| CVE-2026-90095 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fuse: Fix the condition to enable over-io-uring The existing condition in fuse_uring_cmd() is there only to avoid disabling io-uring for connections that already run with it, missing was a condition to refuse any IORING_OP_URING_CMD if the connection/channel didn't get enabled because of missing FUSE_INIT reply flag FUSE_OVER_IO_URING. Without the reply flag the barrier in fuse_uring_ready() doesn't work and IO could already be going on and cause deadlock states (at a minimum one between fch->bg_lock and queue->lock). The change itself is trivial, but brings behavior change, FUSE_OVER_IO_URING has to be set in the FUSE_INIT_REPLY by fuse servers to accept any IORING_OP_URING_CMD. Libfuse does that and the only non-libfuse implementation I found (fractal-fuse) also does it. Qemu patches for fuse-io-uring are not merged yet, as far as I know. Moved up is the smp_load_acquire(&fch->initialized) check, as a fuse-server implementation might try to setup io-uring before FUSE_INIT is processed and might have gotten -EOPNOTSUPP instead of -EAGAIN. Also fixed is a stale comment that explains the handling of the FUSE_OVER_IO_URING flag in early RFC versions. If there should be a report from any library or application we probably need to revert this commit. | ||||
| CVE-2026-90093 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: access chan->conn safely in get/setsockopt Since commit b66774b48dd9 ("Bluetooth: L2CAP: Fix UAF in channel timeout by holding conn ref") l2cap_chan::conn has held reference and remains non-NULL also after the corresponding hci_conn is deleted. In this state accessing various fields eg. hci_conn::hdev is invalid, which leads to KASAN crash in l2cap_sock_setsockopt() access of conn->hcon->hdev. Check l2cap_chan::conn.hcon corresponds to an alive hci_conn before trying to use it in l2cap_sock.c. Hold l2cap_chan_lock() in getsockopt/setsockopt to ensure it stays alive, and to avoid data races in l2cap_chan fields. | ||||
| CVE-2026-90087 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: do not leak an hci_conn when a second LE connect is rejected create_le_conn_complete() decides whether the failed connection is still pending by comparing it against hci_lookup_le_connect(), which returns the first LE connection in BT_CONNECT. That is the same connection only while at most one is pending. Two can be pending. Connections created on the passive scan path sit in BT_CONNECT with HCI_CONN_SCANNING set and are invisible to hci_lookup_le_connect() until hci_le_create_conn_sync() clears the flag when their command is issued, so the -EBUSY guard in hci_connect_le() does not prevent a second connection from being queued while the first is still on the scan path. Whenever two connections are in BT_CONNECT at once, the lookup may return one connection while create_le_conn_complete() is reporting the failure of the other; the early exit then drops the error and hci_conn_failed() never runs on the connection that failed. The controller also rejects a second HCI_OP_LE_CREATE_CONN issued while another connection creation is still outstanding, per Core Spec Vol 4, Part E. The spec calls for Command Disallowed there; the bcm43438 observed here answers with an LMP/LL error code instead, which bt_to_errno() maps to the -EPROTO (-71) in the log below. The leaked connection stays in BT_CONNECT forever, and because hci_connect_le() refuses to dial while hci_lookup_le_connect() finds anything, every subsequent attempt to reach any peer fails with -EBUSY and no command reaches the controller at all. Seen on a bcm43438 with two BLE peers polled on the same interval (state 5 is BT_CONNECT; both handles are UNSET ones, allocated from the ida above HCI_CONN_HANDLE_MAX): Bluetooth: hci1: Opcode 0x2013 failed: -71 # hcitool con < LE 14:9C:EF:03:68:81 handle 3840 state 5 lm CENTRAL < LE C4:D3:6A:8C:B5:38 handle 3841 state 5 lm CENTRAL A btmon capture across the next ten minutes of connect attempts contains no HCI_OP_LE_CREATE_CONN at all; outgoing LE connections do not recover until the adapter is reset. With this change the same scenario fails the rejected connection cleanly and further connects to both peers go through. Ask about the connection itself instead of about the device. | ||||
| CVE-2026-90082 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: mana: Cap MSI-X vectors to the device MSI-X table size mana_gd_query_max_resources() sizes gc->num_msix_usable from resp.max_msix and the CPU count, but never from the device MSI-X table. On a 1792 vCPU M-series VM that yields 1793 while the table has 1024 entries, and mana_gd_setup_remaining_irqs() then walks indices 1..1792, running off the end of the region mapped by msix_map_region(): BUG: unable to handle page fault for address: ff8e347f8b99800c RIP: 0010:msix_prepare_msi_desc+0x7a/0x90 RAX: 0000000000004000 RBX: ff4330cb164ea780 RCX: ff8e347f8b998000 Call Trace: <TASK> __msi_domain_alloc_irqs+0x13a/0x440 msi_domain_alloc_irq_at+0x149/0x1b0 mana_gd_setup+0x351/0x890 mana_gd_probe+0x274/0x390 </TASK> RAX is index 1024 * PCI_MSIX_ENTRY_SIZE, one entry past the table. msi_insert_desc() does range check the index, but only against the MSI domain hwsize, which matches the table only for devices on an MSI parent domain. With a global PCI/MSI domain hwsize is MSI_XA_DOMAIN_SIZE, so nothing bounds the request. Cap num_msix_usable with pci_msix_vec_count(). | ||||
| CVE-2026-90079 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: fix cn20k mailbox lifetime on repeated rvu_mbox_init() rvu_mbox_init() is called separately for AF-PF mailboxes during probe and for AF-VF mailboxes when SR-IOV is enabled. Each call used to allocate a new ng_rvu object, leaking the first allocation when the pointer was overwritten on the second call. Sharing one ng_rvu across both paths exposed several teardown bugs: the error path freed all cn20k mailbox DMA and kfree()d ng_rvu even when only the failing init type should be unwound, leaving live AF-PF mailbox memory in use after an AF-VF init failure. mutex_init() was also re-run on the AF-VF path while AF-PF mailbox handlers could still hold rvu->mbox_lock. Probe and SR-IOV failure paths did not release cn20k mailbox DMA either, since cleanup only happened in rvu_remove(). Allocate ng_rvu once with devm_kzalloc(), initialize mbox_lock in the same block, unwind only the mailbox memory for the failing init type, and free cn20k mailbox DMA from the probe and pci_enable_sriov() error paths. | ||||
| CVE-2026-90061 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: skip double clone set expressions on element insert Both the dynset and newsetelem path clone the existing set expressions when setting set element expressions if no override expressions are provided. This results in a double clone, once to clone the template set expressions then another clone on the new element. Add a flag to annotate if userspace provides a override expression (ie. expression of the same type of the set but different configuration), otherwise borrow the existing expression from the set. Add conditionals to release expression iif they represent an override. Use this new override_exprs flag to dump the dynset expression override to userspace. This simplifies the existing logic and it also fixes a bug with the connlimit expression which results in a module refcount imbalance WARNING splat when resorting on the default set expressions. | ||||