Export limit exceeded: 44672 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (44672 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53218 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_exthdr: fix register tracking for F_PRESENT flag nft_exthdr_init() passes user-controlled priv->len to nft_parse_register_store(), which marks that many bytes in the register bitmap as initialized. However, when NFT_EXTHDR_F_PRESENT is set, the eval paths write only 1 byte (nft_reg_store8) or 4 bytes (*dest = 0 on TCP/DCCP error path). When len > 4, registers beyond the first are never written, retaining uninitialized stack data from nft_regs. Bail out if userspace requests too much data when F_PRESENT is set. | ||||
| CVE-2026-53134 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_fib: fix stale stack leak via the OIFNAME register For NFT_FIB_RESULT_OIFNAME the destination register is declared with len = IFNAMSIZ (four 32-bit registers), but on the lookup-fail, RTN_LOCAL and oif-mismatch paths nft_fib{4,6}_eval() only writes one register via "*dest = 0". The remaining three registers are left as whatever was on the stack in nft_do_chain()'s struct nft_regs, and a downstream expression that loads the register span can leak that uninitialised kernel stack to userspace. The NFTA_FIB_F_PRESENT existence check has the same shape: it is only meaningful for NFT_FIB_RESULT_OIF, yet it was accepted for any result type while the eval stores a single byte via nft_reg_store8(), leaving the rest of the declared span stale. Fix both: - replace the bare "*dest = 0" in the eval with nft_fib_store_result(), which strscpy_pad()s the whole IFNAMSIZ for OIFNAME (and is already used on the other early-return path), and - restrict NFTA_FIB_F_PRESENT to NFT_FIB_RESULT_OIF and declare its destination as a single u8, so the marked span matches the one byte the eval writes. | ||||
| CVE-2026-52929 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: stream: fully roll back denied add-stream state When ADD_OUT_STREAMS is denied, SCTP only shrinks the queued chunks and then lowers outcnt. That leaves removed stream metadata behind, so a later re-add can reuse a stale ext and hit a null-pointer dereference in the scheduler get path. Fix the rollback by tearing down the removed stream state the same way other stream resizes do. Unschedule the current scheduler state, drop the removed stream ext state with sctp_stream_outq_migrate(), and then reschedule the remaining streams. This keeps scheduler-private RR/FC/PRIO lists consistent while fully rolling back denied outgoing stream additions. | ||||
| CVE-2026-52917 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: diag: reject stale associations in dump_one path The SCTP exact sock_diag lookup can hold a transport reference, block on lock_sock(sk), and then resume after sctp_association_free() has marked the association dead and freed its bind address list. When that happens, inet_assoc_attr_size() and inet_diag_msg_sctpasoc_fill() can still dereference association state that is no longer valid for reporting. In particular, inet_diag_msg_sctpasoc_fill() may read an empty bind-address list as a real sctp_sockaddr_entry and trigger an out-of-bounds read from unrelated association memory. Reject the association after taking the socket lock if it has been reaped or detached from the endpoint, and report the lookup as stale. This keeps the exact dump-one path from formatting torn association state. | ||||
| CVE-2026-46304 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: avoid recursive nvmet-wq flush in nvmet_ctrl_free nvmet_tcp_release_queue_work() runs on nvmet-wq and can drop the final controller reference through nvmet_cq_put(). If that triggers nvmet_ctrl_free(), the teardown path flushes ctrl->async_event_work on the same nvmet-wq. Call chain: nvmet_tcp_schedule_release_queue() kref_put(&queue->kref, nvmet_tcp_release_queue) nvmet_tcp_release_queue() queue_work(nvmet_wq, &queue->release_work) <--- nvmet_wq process_one_work() nvmet_tcp_release_queue_work() nvmet_cq_put(&queue->nvme_cq) nvmet_cq_destroy() nvmet_ctrl_put(cq->ctrl) nvmet_ctrl_free() flush_work(&ctrl->async_event_work) <--- nvmet_wq Previously Scheduled by :- nvmet_add_async_event queue_work(nvmet_wq, &ctrl->async_event_work); This trips lockdep with a possible recursive locking warning. [ 5223.015876] run blktests nvme/003 at 2026-04-07 20:53:55 [ 5223.061801] loop0: detected capacity change from 0 to 2097152 [ 5223.072206] nvmet: adding nsid 1 to subsystem blktests-subsystem-1 [ 5223.088368] nvmet_tcp: enabling port 0 (127.0.0.1:4420) [ 5223.126086] nvmet: Created discovery controller 1 for subsystem nqn.2014-08.org.nvmexpress.discovery for NQN nqn.2014-08.org.nvmexpress:uuid:0f01fb42-9f7f-4856-b0b3-51e60b8de349. [ 5223.128453] nvme nvme1: new ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery", addr 127.0.0.1:4420, hostnqn: nqn.2014-08.org.nvmexpress:uuid:0f01fb42-9f7f-4856-b0b3-51e60b8de349 [ 5233.199447] nvme nvme1: Removing ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery" [ 5233.227718] ============================================ [ 5233.231283] WARNING: possible recursive locking detected [ 5233.234696] 7.0.0-rc3nvme+ #20 Tainted: G O N [ 5233.238434] -------------------------------------------- [ 5233.241852] kworker/u192:6/2413 is trying to acquire lock: [ 5233.245429] ffff888111632548 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90 [ 5233.251438] but task is already holding lock: [ 5233.255254] ffff888111632548 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x5cc/0x6e0 [ 5233.261125] other info that might help us debug this: [ 5233.265333] Possible unsafe locking scenario: [ 5233.269217] CPU0 [ 5233.270795] ---- [ 5233.272436] lock((wq_completion)nvmet-wq); [ 5233.275241] lock((wq_completion)nvmet-wq); [ 5233.278020] *** DEADLOCK *** [ 5233.281793] May be due to missing lock nesting notation [ 5233.286195] 3 locks held by kworker/u192:6/2413: [ 5233.289192] #0: ffff888111632548 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x5cc/0x6e0 [ 5233.294569] #1: ffffc9000e2a7e40 ((work_completion)(&queue->release_work)){+.+.}-{0:0}, at: process_one_work+0x1c5/0x6e0 [ 5233.300128] #2: ffffffff82d7dc40 (rcu_read_lock){....}-{1:3}, at: __flush_work+0x62/0x530 [ 5233.304290] stack backtrace: [ 5233.306520] CPU: 4 UID: 0 PID: 2413 Comm: kworker/u192:6 Tainted: G O N 7.0.0-rc3nvme+ #20 PREEMPT(full) [ 5233.306524] Tainted: [O]=OOT_MODULE, [N]=TEST [ 5233.306525] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 [ 5233.306527] Workqueue: nvmet-wq nvmet_tcp_release_queue_work [nvmet_tcp] [ 5233.306532] Call Trace: [ 5233.306534] <TASK> [ 5233.306536] dump_stack_lvl+0x73/0xb0 [ 5233.306552] print_deadlock_bug+0x225/0x2f0 [ 5233.306556] __lock_acquire+0x13f0/0x2290 [ 5233.306563] lock_acquire+0xd0/0x300 [ 5233.306565] ? touch_wq_lockdep_map+0x26/0x90 [ 5233.306571] ? __flush_work+0x20b/0x530 [ 5233.306573] ? touch_wq_lockdep_map+0x26/0x90 [ 5233.306577] touch_wq_lockdep_map+0x3b/0x90 [ 5233.306580] ? touch_wq_lockdep_map+0x26/0x90 [ 52 ---truncated--- | ||||
| CVE-2026-46243 | 1 Linux | 2 Kernel, Linux Kernel | 2026-10-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reject userspace cifs.spnego descriptions cifs.spnego key descriptions contain authority-bearing fields such as pid, uid, creduid, and upcall_target that cifs.upcall treats as kernel-originating inputs. However, userspace can also create keys of this type through request_key(2) or add_key(2), allowing those fields to be supplied without CIFS origin. Only accept cifs.spnego descriptions while CIFS is using its private spnego_cred to request the key. | ||||
| CVE-2026-46193 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: ah: account for ESN high bits in async callbacks AH allocates its temporary auth/ICV layout differently when ESN is enabled: the async ahash setup appends a 4-byte seqhi slot before the ICV or auth_data area, but the async completion callbacks still reconstruct the temporary layout as if seqhi were absent. With an async AH implementation selected, that makes AH copy or compare the wrong bytes on both the IPv4 and IPv6 paths. In UML repro on IPv4 AH with ESN and forced async hmac(sha1), ping fails with 100% packet loss, and the callback logs show the pre-fix drift: ah4 output_done: esn=1 err=0 icv_off=20 expected_off=24 ah4 input_done: esn=1 auth_off=20 expected_auth_off=24 icv_off=32 expected_icv_off=36 Reconstruct the callback-side layout the same way the setup path built it by skipping the ESN seqhi slot before locating the saved auth_data or ICV. Per RFC 4302, the ESN high-order 32 bits participate in the AH ICV computation, so the async callbacks must account for the seqhi slot. Post-fix, the same IPv4 AH+ESN+forced-async-hmac(sha1) UML repro shows the corrected offset (ah4 output_done: esn=1 err=0 icv_off=24 expected_off=24) and ping succeeds; net/ipv4/ah4.o and net/ipv6/ah6.o build clean at W=1. IPv6 AH+ESN was not exercised at runtime, and the change has not been tested against a real async hardware AH engine. | ||||
| CVE-2026-46177 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ipmi: Add limits to event and receive message requests The driver would just fetch events and receive messages until the BMC said it was done. To avoid issues with BMCs that never say they are done, add a limit of 10 fetches at a time. In addition, an si interface has an attn state it can return from the hardware which is supposed to cause a flag fetch to see if the driver needs to fetch events or message or a few other things. If the attn bit gets stuck, it's a similar problem. So allow messages in between flag fetches so the driver itself doesn't get stuck. This is a more general fix than the previous fix for the specific bad BMC, but should fix the more general issue of a BMC that won't stop saying it has data. This has been there from the beginning of the driver. It's not a bug per-se, but it is accounting for bugs in BMCs. | ||||
| CVE-2026-46168 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix scheduling with atomic in timestamp sockopt Using lock_sock_fast() (atomic context) around sock_set_timestamp() and sock_set_timestamping() is unsafe, as both helpers can sleep. Replace lock_sock_fast() with sleepable lock_sock()/release_sock() to avoid scheduling while atomic panic. | ||||
| CVE-2026-46167 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: usblp: fix uninitialized heap leak via LPGETSTATUS ioctl Just like in a previous problem in this driver, usblp_ctrl_msg() will collapse the usb_control_msg() return value to 0/-errno, discarding the actual number of bytes transferred. Ideally that short command should be detected and error out, but many printers are known to send "incorrect" responses back so we can't just do that. statusbuf is kmalloc(8) at probe time and never filled before the first LPGETSTATUS ioctl. usblp_read_status() requests 1 byte. If a malicious printer responds with zero bytes, *statusbuf is one byte of stale kmalloc heap, sign-extended into the local int status, which the LPGETSTATUS path then copy_to_user()s directly to the ioctl caller. Fix this all by just zapping out the memory buffer when allocated at probe time. If a later call does a short read, the data will be identical to what the device sent it the last time, so there is no "leak" of information happening. | ||||
| CVE-2026-46165 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: openvswitch: vport: fix self-deadlock on release of tunnel ports vports are used concurrently and protected by RCU, so netdev_put() must happen after the RCU grace period. So, either in an RCU call or after the synchronize_net(). The rtnl_delete_link() must happen under RTNL and so can't be executed in RCU context. Calling synchronize_net() while holding RTNL is not a good idea for performance and system stability under load in general, so calling netdev_put() in RCU call is the right solution here. However, when the device is deleted, rtnl_unlock() will call netdev_run_todo() and block until all the references are gone. In the current code this means that we never reach the call_rcu() and the vport is never freed and the reference is never released, causing a self-deadlock on device removal. Fix that by moving the rcu_call() before the rtnl_unlock(), so the scheduled RCU callback will be executed when synchronize_net() is called from the rtnl_unlock()->netdev_run_todo() while the RTNL itself is already released. | ||||
| CVE-2026-46151 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: usblp: fix heap leak in IEEE 1284 device ID via short response usblp_ctrl_msg() collapses the usb_control_msg() return value to 0/-errno, discarding the actual number of bytes transferred. A broken printer can complete the GET_DEVICE_ID control transfer short and the driver has no way to know. usblp_cache_device_id_string() reads the 2-byte big-endian length prefix from the response and trusts it (clamped only to the buffer bounds). The buffer is kmalloc(1024) at probe time. A device that sends exactly two bytes (e.g. 0x03 0xFF, claiming a 1023-byte ID) leaves device_id_string[2..1022] holding stale kmalloc heap. That stale data is then exposed: - via the ieee1284_id sysfs attribute (sprintf("%s", buf+2), truncated at the first NUL in the stale heap), and - via the IOCNR_GET_DEVICE_ID ioctl, which copy_to_user()s the full claimed length regardless of NULs, up to 1021 bytes of uninitialized heap, with the leak size chosen by the device. Fix this up by just zapping the buffer with zeros before each request sent to the device. | ||||
| CVE-2026-46146 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Avoid potential endless loop in convert_chmap_v3() The convert_chmap_v3() has a loop with its increment size of cs_desc->wLength, but we forgot to validate cs_desc->wLength itself, which may lead to potential endless loop by a malformed descriptor. Add a proper size check to abort the loop for plugging the hole. | ||||
| CVE-2026-46088 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: control: Validate buf_len before strnlen() in snd_ctl_elem_init_enum_names() snd_ctl_elem_init_enum_names() advances pointer p through the names buffer while decrementing buf_len. If buf_len reaches zero but items remain, the next iteration calls strnlen(p, 0). While strnlen(p, 0) returns 0 and would hit the existing name_len == 0 error path, CONFIG_FORTIFY_SOURCE's fortified strnlen() first checks maxlen against __builtin_dynamic_object_size(). When Clang loses track of p's object size inside the loop, this triggers a BRK exception panic before the return value is examined. Add a buf_len == 0 guard at the loop entry to prevent calling fortified strnlen() on an exhausted buffer. Found by kernel fuzz testing through Xiaomi Smartphone. | ||||
| CVE-2026-46069 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: fix use-after-free in mwifiex_adapter_cleanup() The mwifiex_adapter_cleanup() function uses timer_delete() (non-synchronous) for the wakeup_timer before the adapter structure is freed. This is incorrect because timer_delete() does not wait for any running timer callback to complete. If the wakeup_timer callback (wakeup_timer_fn) is executing when mwifiex_adapter_cleanup() is called, the callback will continue to access adapter fields (adapter->hw_status, adapter->if_ops.card_reset, etc.) which may be freed by mwifiex_free_adapter() called later in the mwifiex_remove_card() path. Use timer_delete_sync() instead to ensure any running timer callback has completed before returning. | ||||
| CVE-2026-46051 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid5: fix soft lockup in retry_aligned_read() When retry_aligned_read() encounters an overlapped stripe, it releases the stripe via raid5_release_stripe() which puts it on the lockless released_stripes llist. In the next raid5d loop iteration, release_stripe_list() drains the stripe onto handle_list (since STRIPE_HANDLE is set by the original IO), but retry_aligned_read() runs before handle_active_stripes() and removes the stripe from handle_list via find_get_stripe() -> list_del_init(). This prevents handle_stripe() from ever processing the stripe to resolve the overlap, causing an infinite loop and soft lockup. Fix this by using __release_stripe() with temp_inactive_list instead of raid5_release_stripe() in the failure path, so the stripe does not go through the released_stripes llist. This allows raid5d to break out of its loop, and the overlap will be resolved when the stripe is eventually processed by handle_stripe(). | ||||
| CVE-2026-46047 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: qrtr: ns: Fix use-after-free in driver remove() In the remove callback, if a packet arrives after destroy_workqueue() is called, but before sock_release(), the qrtr_ns_data_ready() callback will try to queue the work, causing use-after-free issue. Fix this issue by saving the default 'sk_data_ready' callback during qrtr_ns_init() and use it to replace the qrtr_ns_data_ready() callback at the start of remove(). This ensures that even if a packet arrives after destroy_workqueue(), the work struct will not be dereferenced. Note that it is also required to ensure that the RX threads are completed before destroying the workqueue, because the threads could be using the qrtr_ns_data_ready() callback. | ||||
| CVE-2026-46021 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: thermal: core: Fix thermal zone governor cleanup issues If thermal_zone_device_register_with_trips() fails after adding a thermal governor to the thermal zone being registered, the governor is not removed from it as appropriate which may lead to a memory leak. In turn, thermal_zone_device_unregister() calls thermal_set_governor() without acquiring the thermal zone lock beforehand which may race with a governor update via sysfs and may lead to a use-after-free in that case. Address these issues by adding two thermal_set_governor() calls, one to thermal_release() to remove the governor from the given thermal zone, and one to the thermal zone registration error path to cover failures preceding the thermal zone device registration. | ||||
| CVE-2026-43499 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rtmutex: Use waiter::task instead of current in remove_waiter() remove_waiter() is used by the slowlock paths, but it is also used for proxy-lock rollback in rt_mutex_start_proxy_lock() when invoked from futex_requeue(). In the latter case waiter::task is not current, but remove_waiter() operates on current for the dequeue operation. That results in several problems: 1) the rbtree dequeue happens without waiter::task::pi_lock being held 2) the waiter task's pi_blocked_on state is not cleared, which leaves a dangling pointer primed for UAF around. 3) rt_mutex_adjust_prio_chain() operates on the wrong top priority waiter task Use waiter::task instead of current in all related operations in remove_waiter() to cure those problems. [ tglx: Fixup rt_mutex_adjust_prio_chain(), add a comment and amend the changelog ] | ||||
| CVE-2026-43421 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: Fix net_device lifecycle with device_move The network device outlived its parent gadget device during disconnection, resulting in dangling sysfs links and null pointer dereference problems. A prior attempt to solve this by removing SET_NETDEV_DEV entirely [1] was reverted due to power management ordering concerns and a NO-CARRIER regression. A subsequent attempt to defer net_device allocation to bind [2] broke 1:1 mapping between function instance and network device, making it impossible for configfs to report the resolved interface name. This results in a regression where the DHCP server fails on pmOS. Use device_move to reparent the net_device between the gadget device and /sys/devices/virtual/ across bind/unbind cycles. This preserves the network interface across USB reconnection, allowing the DHCP server to retain their binding. Introduce gether_attach_gadget()/gether_detach_gadget() helpers and use __free(detach_gadget) macro to undo attachment on bind failure. The bind_count ensures device_move executes only on the first bind. [1] https://lore.kernel.org/lkml/f2a4f9847617a0929d62025748384092e5f35cce.camel@crapouillou.net/ [2] https://lore.kernel.org/linux-usb/795ea759-7eaf-4f78-81f4-01ffbf2d7961@ixit.cz/ | ||||