Export limit exceeded: 410259 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 410259 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (410259 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98551 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: perf/core: Fill branch entries with a single assignment perf_clear_branch_entry_bitfields() clears the bitfields of struct perf_branch_entry one by one and leaves from/to alone, since callers overwrite those straight away. The list has to be kept in sync with the struct by hand and has already fallen behind: new_type and priv were added to perf_branch_entry and never added here. Only BRBE writes those two, and neither for every record. brbe_set_perf_entry_type() leaves new_type alone for a branch type it does not recognise, and priv is not set for source-only records. arm_pmuv3.c allocates the per-CPU branch stack with kmalloc(), so such a record reaches userspace with whatever the slot held: uninitialised kmalloc() data on the first pass over the buffer, the previous record's values after that. Nothing under arch/x86/events/ writes either field, so only arm64 is affected. Assign the whole entry at each site instead. Everything not named is then zero, and there is no list to keep in sync. The bitfields add up to exactly 64 bits, so the struct has no padding to leave undefined. perf_clear_branch_entry_bitfields() has no callers left, so remove it. perf_entry_from_brbe_regset() assigns an empty literal instead, since it fills from/to conditionally. PERF_BR_SPEC_NA is 0, so dropping the explicit spec assignment changes nothing. | ||||
| CVE-2026-112033 | 1 Aircheng-org | 1 Iwebshop-5 | 2026-10-19 | 4.3 Medium |
| A security flaw has been discovered in aircheng-org iWebShop-5 up to 5.16. The affected element is the function admin_repwd/admin_repwd_act of the file controllers/system.php of the component Password Change. The manipulation of the argument password/repassword results in cross-site request forgery. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-98442 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: fix helper UAF due to extensions realloc While calling the helpers, a raw pointer to the extensions area is wired into expectations list: -> nf_ct_helper() -> helper->help() -> nf_ct_expect_related_report() -> nf_ct_expect_insert() -> hlist_add_head_rcu(&exp->lnode, &master_help->expectations) In case the connection is not confirmed yet, more extensions can be added afterwards with *_ext_add() calls reallocating the extension space and leaving the now invalid pointer in the expectations list that is later accessed while removing the expectation. Make sure that helpers are called at the end after all the other extensions are already added. Note that the helper rejection now leaves the mark and labels set, but that's not different from how the NAT was handled before or how the mark and the labels were handled on confirmation failure. And there are no atomicity guarantees provided by the API anyway. | ||||
| CVE-2026-98450 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: close completed creates on compound wait errors compound_send_recv() waits for responses in order. If a later wait is interrupted, or if a later MID fails during response synchronization, an earlier CREATE may already have opened a remote handle. The earlier mid is then released without invoking handle_cancelled_mid(), leaving the remote handle open because no FID was copied to the caller. Mark completed earlier mids as cancelled when a compound wait or MID synchronization aborts. Keep their response buffers attached while the MIDs are synchronized, and transfer them only after synchronization of the processed responses, so the release path can inspect successful CREATE responses and queue SMB2_close() after a later failure. Account for a remote open only after the close work is allocated and before it is queued, since the caller has not yet updated num_remote_opens. Mark the create+close compound used by smb2_unlink() so it is not closed again. Non-CREATE responses and compounds that already include a close keep their existing behavior. | ||||
| CVE-2026-98452 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: clean up failed cached directory opens open_cached_dir() sends CREATE and QUERY_INFO as a compound request. If the CREATE succeeds but a later command returns an error, the function must retain the CREATE FID so common cleanup can issue SMB2_close(). It also must not treat a response error as a valid CREATE. Validate the CREATE response before using its fields, record the FIDs, and mark the handle open before handling errors from later compound commands. Move the -EREMCHG reconnect handling before response validation so a missing response does not hide the reconnect request. Count the handle when it is marked open; confirmed close responses decrement the counter, while existing close retry behavior remains best effort on transport failures. | ||||
| CVE-2026-98460 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: reject out-of-range OCF values The raw HCI socket security filter has 128 OCF bits per supported OGF, but masks the 10-bit OCF with 127 before looking up the command. An unprivileged socket can therefore submit a reserved OCF that aliases an allowlisted command modulo 128. A conforming controller should reject reserved opcodes. Nevertheless, the security decision must apply to the opcode that will actually be sent, especially since controller-specific behavior is outside the host stack's control. Reject OCF values that cannot be represented by the security filter instead of aliasing them onto an unrelated command. | ||||
| CVE-2026-98468 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix spurious warning for benign stage 2 teardown race kvmtool was used to establish an L1 guest with 8 CPUs and 8 GiB of RAM, an L2 guest with 4 CPUs and 4 GiB of RAM and an L3 guest with 2 CPUs and 2 GiB of RAM, all of which was then exited. Under memory pressure in the L0 host warnings were observed due to migration triggered by compaction: WARNING: arch/arm64/kvm/mmu.c:336 at __unmap_stage2_range+0x64/0x80, CPU#5: kcompactd0/66 Which was, in turn, triggered by an MMU notifier for the host invalidation: mmu_notifier_invalidate_range_start() -> ... -> kvm_mmu_notifier_invalidate_range_start() -> kvm_mmu_unmap_gfn_range() -> kvm_unmap_gfn_range() -> kvm_nested_s2_unmap() -> kvm_stage2_unmap_range() -> __unmap_stage2_range() -> stage2_apply_range() <- -EINVAL, triggering a WARN_ON() Racing with L0's teardown of stage 2 page tables: exit_mm() -> mmput() -> __mmput() -> exit_mmap() -> mmu_notifier_release() -> ... -> kvm_mmu_notifier_release() -> kvm_flush_shadow_all() -> kvm_arch_flush_shadow_all() -> kvm_free_stage2_pgd() -> [ acquire kvm->mmu_lock for write ] -> mmu->pgt = NULL [ among other tasks ] -> [ release kvm->mmu_lock for write ] It turns out there is a benign race resulting in a spurious warning: Thread A - notify: migration | Thread B - notify: release -------------------------------|--------------------------------- < kvm->mmu_lock held > | stage2_apply_range() | get mmu->pgt, check !NULL | ... | kvm_arch_flush_shadow_all() cond_resched_rwlock_write(); | < contend, sleep kvm->mmu_lock > < drop kvm->mmu_lock > | < acquire kvm->mmu_lock> | ... | kvm_free_stage2_pgd() | mmu->pgt = NULL | < invalidate MMU > | ... | < release kvm->mmu_lock > [ scheduled ] | stage2_apply_range() | < loop to next > | get, mmu->pgt, check !NULL | is NULL, return -EINVAL | __unmap_stage2_range() | WARN_ON(-EINVAL) <--- entirely spurious - the race was handled correctly. Fix the spurious warning by updating stage2_apply_range() to no longer treat concurrent PGT teardown on lock release as an error - whether the walker is tearing down page tables or doing something else this is a legitimate reason to abort the operation without error. This keeps the warning in place for all other circumstances. In practice only __unmap_stage2_range() actually does anything with the error so this only impacts that. | ||||
| CVE-2026-98470 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Don't WARN on an unknown VM ioctl in protected mode kvm_pkvm_ioctl_allowed() WARNs when kvm_get_cap_for_kvm_ioctl() doesn't find the ioctl number in vm_ioctl_caps[], and kvm_arch_vm_ioctl() calls it for every number the generic code doesn't handle, so ioctl(vm_fd, 0xdeadbeef) from userspace taints a pKVM host and panics it under panic_on_warn. The lookup is fed userspace input: return false, and userspace gets the -EINVAL kvm_arch_vm_ioctl() returns for that number on a host without pKVM. | ||||
| CVE-2026-98476 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/cio: Fix NULL pointer dereference in ccw_device_get_util_str() The channel path registry entry associated with a CHPID may be removed while the subchannel's PMCW still references that CHPID. In this case, chpid_to_chp() can return NULL, leading to a NULL pointer dereference. Add the missing NULL check before dereferencing the returned pointer. | ||||
| CVE-2026-98555 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: llc: fix skb UAF and leaks on llc_mac_hdr_init() failure In llc_conn_ac_resend_i_xxx_x_set_0_or_send_rr(), if llc_mac_hdr_init() fails, kfree_skb(skb) is called instead of kfree_skb(nskb). This leaks the newly allocated nskb, reads from the freed skb via LLC_I_GET_NR(pdu), and double-frees skb when llc_conn_state_process() drops its reference. In llc_sap_action_send_xid_r() and llc_sap_action_send_test_r(), nskb is leaked if llc_mac_hdr_init() returns an error. Free nskb in all three error paths. | ||||
| CVE-2026-98558 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: flush skb_defer_nodes in dev_cpu_dead() When a CPU goes offline, dev_cpu_dead() drains its softnet queues (completion_queue, output_queue, poll_list, process_queue, and input_pkt_queue), but leaves net_hotdata.skb_defer_nodes untouched. If oldcpu goes offline while holding pending skbs in its skb_defer_nodes lists (e.g. below the sysctl_skb_defer_max >> 1 IPI threshold, or if the IPI races with CPU teardown), those skbs remain stranded until oldcpu is brought back online. If any of these skbs hold page_pool fragments, page_pool_destroy() will stall indefinitely waiting for inflight pages to be returned when a netdev or driver is torn down while oldcpu is offline. Additionally, if smp_call_function_single_async() fails in kick_defer_list_purge() because the target CPU went offline, reset defer_ipi_scheduled to 0 so future IPI kicks are not blocked when the CPU comes back online. Also, if oldcpu was the last online CPU on its NUMA node, drain that node's slot across all CPUs so no skbs deferred from that node remain stranded on idle remote CPUs (or if the node itself is subsequently offlined). Finally, in skb_attempt_defer_free(), re-check cpu_online(cpu) and whether the caller migrated CPUs after llist_add(), flushing the node list if so, to close the preemption TOCTOU race against CPU/node teardown. | ||||
| CVE-2026-98562 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: libwx: fix races in Tx timestamp handling wx->ptp_tx_skb is shared between the Tx path, the PTP auxiliary worker and the timestamp cleanup paths. The WX_STATE_PTP_TX_IN_PROGRESS bit prevents multiple Tx paths from submitting timestamp requests, but does not serialize the worker against cleanup. As a result, wx_ptp_clear_tx_timestamp() can free an skb after wx_ptp_tx_hwtstamp_work() has obtained its pointer. The worker may then pass the freed skb to skb_tstamp_tx() and release the same reference again. The cleanup path may also clear the in-progress bit while the worker is still processing the old skb. This allows the Tx path to publish a new skb which the worker can subsequently overwrite with NULL, leaking its reference. Add a dedicated spinlock to protect publication and consumption of the Tx timestamp skb. Detach the skb and clear the in-progress bit while holding the lock, then deliver the timestamp and release the skb after dropping it. Use the same locked cleanup in the quiesce path, but keep the detach there free of register accesses: quiesce runs during PCIe error recovery, where MMIO is not reliable, and it deliberately did not touch the device before. The lock is taken with interrupts disabled, because netpoll can call ndo_start_xmit() with hard interrupts already off. When handling a Tx DMA mapping failure, keep the transmit path reference until after comparing the skb under the lock. This prevents skb address reuse from making the error path mistake a newer timestamp request for the failed one. | ||||
| CVE-2026-98569 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ip_gre: Reject enabling collect metadata through changelink ipgre_netlink_parms() can enable collect_md on an existing GRE, GRETAP or ERSPAN device. Unlike newlink, changelink does not enforce metadata tunnel uniqueness. Converting a non-metadata device can therefore replace the metadata receive entry for another device of the same type in the same netns. Deleting either device then clears the shared entry, breaking metadata receive lookup for the surviving device. If parameter validation fails after collect_md is set, deleting the modified device can also clear an entry it never owned. Reject enabling metadata mode in both changelink callbacks before any encapsulation or tunnel parameters are modified. Allow requests that repeat the metadata attribute on an existing metadata device. | ||||
| CVE-2026-98570 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ipv6: keep room for the mac header in dst_dev_overhead() The seg6, ioam6 and rpl lwtunnels size their skb_cow_head() request as the length they are about to push plus dst_dev_overhead(), then push the new headers and rebuild the mac header below them with skb_mac_header_rebuild(). That rebuild needs skb->mac_len of headroom, but dst_dev_overhead() leaves LL_RESERVED_SPACE() of the egress device, 16 bytes for plain Ethernet. Where the mac header is longer than that, as it is on ingress through a VLAN device with reorder_hdr off, the rebuild runs out of room: skb_set_mac_header(skb, -skb->mac_len) computes a negative offset, stores it unchecked in the u16 skb->mac_header, and the memmove that follows writes skb->mac_len bytes about 64 KB past skb->head. Forwarding plain ping6 traffic through such a device reproduces it on all five seg6 encapsulation modes and on the rpl and ioam6 inline paths; skb->mac_header comes back as 65534 on a 704-byte head. Return the larger of the two. The helper already returns skb->mac_len when it has no dst, so this only makes the other branch agree, and it covers every caller rather than each call site in turn. | ||||
| CVE-2026-98607 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: fix object leaks in virtio_gpu_resource_create_blob_ioctl() virtio_gpu_resource_create_blob_ioctl() calls drm_gem_object_release() on both the virtio_gpu_resource_assign_uuid() and drm_gem_handle_create() error paths instead of dropping the reference it owns, so obj->funcs->free() never runs and the virtio_gpu_object, the resource id and the host-side resource are leaked. Use drm_gem_object_put() instead. | ||||
| CVE-2026-98623 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/clk: fix list cursor use after loop in nvkm_clk_ustate_update If list_for_each_entry() exits without hitting a break then "pstate" is not a valid pstate pointer. Introduce a "found" variable instead. The check is reachable from userspace: nvkm_clk_ustate_update() takes the pstate id straight from the 'pstate' debugfs file, so requesting an id that is not in clk->states - or any id at all when the perf tables are broken and the list is empty - makes the pstate->pstate != req test dereference the list head cast to a struct nvkm_pstate, which is an out-of-bounds read. [Francesco: rebased on drm-misc-next, expanded the commit message] | ||||
| CVE-2026-98631 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xsk: Use a 32-bit compare in xsk_map_gen_lookup xsk_map_gen_lookup() loads a u32 key and compares it with max_entries using BPF_JMP_IMM. BPF immediates are sign-extended to 64 bits, so a max_entries value of 0x80000000 or higher becomes a threshold larger than every zero-extended 32-bit key. An out-of-range index then skips the bounds check and the generated lookup reads past xsk_map[]. Compare with BPF_JMP32_IMM so the check stays in 32-bit unsigned range. | ||||
| CVE-2026-98722 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: block2mtd: Fix divide error when erase_size is zero The erase size is parsed from the "block2mtd" module parameter and can be set to zero. add_device() then evaluates if (size % erase_size) with a zero divisor, which triggers a divide error: divide error: 0000 [#1] PREEMPT SMP PTI RIP: 0010:add_device drivers/mtd/devices/block2mtd.c:296 [inline] RIP: 0010:block2mtd_setup2+0x592/0xda0 drivers/mtd/devices/block2mtd.c:459 Call Trace: block2mtd_setup+0x27/0xe0 drivers/mtd/devices/block2mtd.c:476 param_attr_store+0x214/0x310 kernel/params.c:589 module_attr_store+0x65/0x90 kernel/params.c:904 kernfs_fop_write_iter+0x3a4/0x540 fs/kernfs/file.c:345 ... Reject a zero erase size before performing the modulo operation so the existing "erasesize must be a divisor of device size" error path reports the invalid argument and frees the device. | ||||
| CVE-2026-89302 | 1 Wordpress-extensions | 1 Post Voting System | 2026-10-19 | 8.6 High |
| The Post Voting System WordPress plugin through 1.0 does not properly sanitize and escape a parameter before using it in a SQL query, allowing unauthenticated users to perform SQL injection attacks. | ||||
| CVE-2026-111886 | 2 Phpmyfaq, Thorsten | 2 Phpmyfaq, Phpmyfaq | 2026-10-19 | 6.5 Medium |
| phpMyFAQ from 4.2.0-alpha.2 before 4.2.0-beta lacks brute-force lockout in the removeTwofactorConfig() 2FA removal endpoint, allowing authenticated attackers to guess TOTP codes without limit. Attackers holding a hijacked session and CSRF token can repeatedly POST guesses to /api/user/remove-twofactor to permanently disable the victim's 2FA. | ||||