Export limit exceeded: 409251 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 409251 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409251 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89545 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: defer rq_argp and rq_resp free until after RCU grace period svc_rqst_free() frees rqstp->rq_argp and rqstp->rq_resp synchronously via kfree(), but defers the rqstp struct free via kfree_rcu(). After svc_exit_thread() calls list_del_rcu() and svc_rqst_free(), there is a window where RCU readers that started before list_del_rcu() can still traverse the thread list and find the rqstp. These readers (e.g. nfsd_nl_rpc_status_get_dumpit()) dereference rqstp->rq_argp, which has already been freed — a use-after-free. Fix this by moving the kfree of rq_argp and rq_resp into an explicit call_rcu() callback alongside the struct free. Resources not accessed by RCU readers (bvec, buffer pages, scratch folio, auth_data) remain synchronously freed. | ||||
| CVE-2026-89544 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: fix gssx_dec_option_array error path bugs Four coupled defects in the gssx XDR option-array decoder make the error paths unsafe: a NULL deref in the caller, a refcount leak on the decoded group_info, and a latent use-after-free that the leak fix would otherwise expose. gssx_dec_option_array() sets oa->count = 1 before allocating oa->data. If that allocation fails, -ENOMEM is returned with oa->count == 1 and oa->data == NULL. All other error paths jump to free_oa: which frees oa->data and NULLs it but also leaves oa->count == 1. The caller trusts the count: gssp_accept_sec_context_upcall() gssx_dec_accept_sec_context() gssx_dec_option_array() /* fails, count=1 data=NULL */ data = res.options.data[0].value /* NULL deref */ Independently, free_creds: releases the partially decoded svc_cred with a bare kfree(creds). gssx_dec_linux_creds() installs a groups_alloc() result into creds->cr_group_info; that object is kvmalloc-backed and refcounted, and only put_group_info() reaches kvfree(). A plain kfree(creds) drops the wrapper and leaks the group_info allocation. The natural fix for the leak is to call free_svc_cred(creds) before kfree(creds), but free_svc_cred() invokes put_group_info() on creds->cr_group_info unconditionally when non-NULL. The existing out_free_groups: path in gssx_dec_linux_creds() already called groups_free() on that pointer without clearing it, so once free_svc_cred() is wired in, the subsequent put_group_info() would touch freed memory. Fix all four together: - Move the oa->count = 1 assignment below the oa->data allocation so it is never set when oa->data is NULL. - Reset oa->count to 0 at free_oa: so count and data stay coherent and the caller sees an empty option array. - Call free_svc_cred(creds) before kfree(creds) at free_creds: so the refcounted cr_group_info is released. free_svc_cred() either NULL-guards each field explicitly (cr_group_info has an if() check) or delegates to a helper that is NULL-safe itself (kfree for the string fields, gss_mech_put() which guards with if(gm) at gss_mech_switch.c:342), so it is safe to call on a partially decoded svc_cred where only cr_uid/cr_gid/cr_group_info have been written and everything else is zero from kzalloc. - In gssx_dec_linux_creds()'s out_free_groups: path, release cr_group_info with put_group_info() rather than groups_free() so the teardown matches free_svc_cred()'s refcount-aware path, and clear the pointer so a later free_svc_cred() on the same creds does not release it a second time. | ||||
| CVE-2026-89542 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: harden gss_krb5_unwrap_v2 against short tokens gss_krb5_unwrap_v2() reads the EC and RRC header fields at ptr+4 and ptr+6 before validating that the token is at least GSS_KRB5_TOK_HDR_LEN (16) bytes long, and its rotate_left() helper passes buf->len - base to xdr_buf_subsegment() without verifying that base <= buf->len. When a caller hands in a sub-16-byte token, or a token whose declared len leaves base past the end of the buffer, three distinct failures follow: gss_krb5_unwrap_v2(offset, len, buf) ptr = buf->head[0].iov_base + offset ec = *(ptr + 4) /* OOB read on short head */ rrc = *(ptr + 6) /* OOB read on short head */ rotate_left(offset + 16, buf, rrc) xdr_buf_subsegment(buf, &subbuf, base, buf->len - base) /* u32 wrap when base > len */ _rotate_left(&subbuf, shift) shift %= buf->len /* divide-by-zero when base == len */ After decryption, the cleanup arithmetic has the same shape: movelen = min_t(unsigned int, buf->head[0].iov_len, len); movelen -= offset + GSS_KRB5_TOK_HDR_LEN + headskip; BUG_ON(offset + GSS_KRB5_TOK_HDR_LEN + headskip + movelen > buf->head[0].iov_len); The BUG_ON re-adds the value just subtracted, so it reduces to min(A, B) > A and is permanently false; it cannot catch the unsigned underflow of movelen, which then drives a ~UINT_MAX-byte memmove(). Add four defense-in-depth guards inside the unwrap core so it is safe regardless of what its callers validate: - reject tokens with len - offset < GSS_KRB5_TOK_HDR_LEN before touching ptr+4/ptr+6; - bail from rotate_left() when buf->len <= base, covering both the underflow and zero-length cases; - return early from _rotate_left() when buf->len is zero, so the shift %= buf->len modulo cannot fault; - replace the dead BUG_ON with a live check that returns GSS_S_DEFECTIVE_TOKEN before the movelen subtraction. | ||||
| CVE-2026-89541 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: harden gss_unwrap_resp_priv length checks gss_unwrap_resp_priv() validates the RPCSEC_GSS opaque length with offset = (u8 *)(p) - (u8 *)head->iov_base; if (offset + opaque_len > rcv_buf->len) goto unwrap_failed; maj_stat = gss_unwrap(ctx->gc_gss_ctx, offset, offset + opaque_len, rcv_buf); Both operands are u32 and the sum is computed in u32. A reply with opaque_len near 0xffffffff makes offset + opaque_len wrap to a small value that is below rcv_buf->len, so the bound check passes and gss_unwrap() is called with end < begin. The check also lacks a lower bound, so any opaque_len in [0, GSS_KRB5_TOK_HDR_LEN) is accepted and forwarded to gss_krb5_unwrap_v2(), whose pre-decrypt header reads at ptr+4 and ptr+6 then run past the token. A krb5p NFS server returning a crafted RPCSEC_GSS reply can drive the client into out-of-bounds reads in gss_krb5_unwrap_v2() and the rotate_left() loop that follows. Fix by replacing the single combined check with three guards that are safe in u32 arithmetic and that enforce the RFC 4121 minimum outer token length: if (offset > rcv_buf->len) goto unwrap_failed; if (opaque_len > rcv_buf->len - offset) goto unwrap_failed; if (opaque_len < GSS_KRB5_TOK_HDR_LEN) goto unwrap_failed; The first guard makes the subtraction in the second guard unconditionally safe; offset is derived from a successful xdr_inline_decode() in the head kvec, so in practice it already satisfies the bound. The floor mirrors the server-side check added in commit 5b757c2e57a5 ("SUNRPC: svcauth_gss: enforce krb5 token minimum length"). | ||||
| CVE-2026-89540 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: init gssp_lock before publishing proc entry create_use_gss_proxy_proc_entry() publishes /proc/net/rpc/use-gss-proxy via proc_create_data() before init_gssp_clnt() runs mutex_init() on sn->gssp_lock. Once the dentry is linked under proc_subdir_lock it is immediately reachable from userspace, so a write that lands in the window drives set_gssp_clnt() into mutex_lock() on a zero-initialized struct mutex. create_use_gss_proxy_proc_entry(net) proc_create_data("use-gss-proxy", ...) /* dentry live */ init_gssp_clnt(sn) mutex_init(&sn->gssp_lock) /* too late */ write_gssp() set_gssp_clnt(net) mutex_lock(&sn->gssp_lock) /* uninitialized */ gssp_rpc_create(...) sn->gssp_clnt = clnt mutex_unlock(&sn->gssp_lock) The window spans only the two statements between proc_create_data() returning and init_gssp_clnt(), so a writer reaches it only if the registering thread is preempted there while another task is already opening the freshly published file. register_pernet_subsys() runs in preemptible context under pernet_ops_rwsem, so that preemption is possible, and the window widens on auth_rpcgss module load, when the proc entry is created for every live net namespace whose tasks are already running. A writer that wins the race locks a zero-filled struct mutex. On CONFIG_DEBUG_MUTEXES the missing magic value trips a "lock used without init" splat; on a production kernel the fast path acquires the lock via CMPXCHG(owner, 0, current). In the latter case a second writer that arrives before init_gssp_clnt() re-zeroes owner can enter set_gssp_clnt() concurrently, shut down the first writer's clnt while it is still in use, and leak the loser's clnt. Fix by initializing sn->gssp_lock in sunrpc_init_net() so its lifetime matches the sunrpc_net it lives in. sn->gssp_clnt is already NULL from the kzalloc that backs net_generic storage, so the lazy helper is no longer needed; drop init_gssp_clnt(), its prototype, and the call from create_use_gss_proxy_proc_entry(). sunrpc.ko is a build-time dependency of auth_rpcgss.ko, so sunrpc_init_net() has always run on every netns before any auth_gss pernet init can publish the proc entry. | ||||
| CVE-2026-89538 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Reject krb5 v2 wrap tokens with oversized ec field gss_krb5_unwrap_v2() sets buf->len to a logical length, which can be much smaller than head[0].iov_len (the allocated receive-page capacity). It then calls xdr_buf_trim() with a trim length derived from the 16-bit "extra count" (ec) field in the Kerberos v2 token header. The ec field is authenticated by the post-decrypt memcmp() against the encrypted header copy, so a randomly-mutated value is rejected. However, any peer holding a valid GSS context can legitimately encrypt a token whose ec exceeds the plaintext length. Per RFC 4121, such a token is structurally malformed. Although xdr_buf_trim() now clamps the buf->len subtraction to avoid unsigned underflow, the buffer is still left in a semantically invalid state (zero length, inconsistent iov lengths) when ec is oversized. Reject these tokens before calling xdr_buf_trim(), giving callers a well-defined GSS_S_DEFECTIVE_TOKEN error and keeping the xdr_buf internally consistent. The wrapped blob begins at a nonzero offset -- both callers pass len as offset + opaque_len -- so buf->len still counts the offset bytes that precede the blob. Compare the trim length against the remaining wrapped segment, buf->len - offset, rather than the whole buffer; comparing against buf->len alone leaves an offset-wide window in which an oversized ec passes the test and xdr_buf_trim() cuts into the bytes ahead of the blob. | ||||
| CVE-2026-89537 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Reject short RFC 4121 MIC tokens in gss_krb5_verify_mic_v2 gss_krb5_verify_mic_v2() reads the token ID at ptr[0..1], the flags byte at ptr[2], and padding at ptr[3..7], then passes ptr + GSS_KRB5_TOK_HDR_LEN and cksum_len to gss_krb5_mic_build_sg(). None of these accesses check read_token->len first. The minimum safe token size is GSS_KRB5_TOK_HDR_LEN (16) plus ctx->krb5e->cksum_len (12-24, depending on the enctype). All callers accept shorter tokens from the wire: - gss_unwrap_resp_integ() enforces only an upper bound (offset + len <= rcv_buf->len) before allocating mic.data = kmalloc(len) and passing it to gss_verify_mic(). A malicious NFS server can therefore supply a short checksum opaque, producing a small slab allocation that the Kerberos MIC verifier reads past. - gss_validate() enforces only len <= RPC_MAX_AUTH_SIZE (400) before passing the wire-supplied length to gss_validate_seqno_mic(), which constructs a mic xdr_netobj and calls gss_verify_mic(). - svcauth_gss_verify_header() enforces only checksum.len >= XDR_UNIT (4 bytes) before dispatching to gss_verify_mic(). - svcauth_gss_unwrap_integ() checks only that the checksum fits in gsd->gsd_scratch. Add a length guard at the top of gss_krb5_verify_mic_v2(), before any ptr[] access or scatterlist construction. Well-formed MIC tokens from gss_krb5_get_mic_v2() already have exactly GSS_KRB5_TOK_HDR_LEN + cksum_len bytes, so valid traffic is unaffected. | ||||
| CVE-2026-89533 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Fix offset arithmetic in read_chunk_range svc_rdma_read_chunk_range() walks a Read chunk's segment list to build a sub-range starting at byte offset and spanning length bytes for a Position-Zero or Call chunk. Two arithmetic defects in the per-segment loop produce wrong DMA lengths and a u32 underflow: pcl_for_each_segment(segment, chunk) { if (offset > segment->rs_length) { offset -= segment->rs_length; continue; } dummy.rs_handle = segment->rs_handle; dummy.rs_length = min_t(u32, length, segment->rs_length) - offset; dummy.rs_offset = segment->rs_offset + offset; First, the skip predicate uses '>' instead of '>='. When offset equals the segment's full rs_length, the segment is fully consumed and should be skipped, but the loop falls through into the body. The resulting dummy.rs_length is min_t(u32, length, rs_length) - rs_length, which underflows to a near-UINT_MAX u32 when length is smaller than rs_length, or is zero otherwise. Second, the length formula subtracts offset from the min_t() result rather than from segment->rs_length before the cap. For offset > 0 the segment's residual is rs_length - offset, not rs_length, so the cap must be applied to the residual. With the current bracketing, whenever length is smaller than rs_length - offset the per-segment length becomes length - offset instead of length, silently dropping offset bytes from the rebuilt chunk. Combined with the boundary case above it also enables the u32 underflow path, which propagates a huge nr_bvec into svc_rdma_build_read_segment() and a multi-MiB kmalloc_array_node() in svc_rdma_get_rw_ctxt(). Additionally, svc_rdma_read_call_chunk() can invoke this function with length == 0 when the last Read chunk ends exactly at the end of the Call chunk. With the corrected >= predicate, every segment is skipped and the function returns the initial -EINVAL, rejecting a valid request. Return success immediately when length is zero. Also break out of the loop once length is fully consumed to avoid passing zero-length segments to svc_rdma_build_read_segment(). Fix by using '>=' so a fully-consumed segment is skipped, by moving '- offset' inside min_t() so the cap is applied to the segment's residual length, by returning success for zero-length requests, and by stopping iteration when the requested range has been consumed. | ||||
| CVE-2026-89532 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Fix pcl_for_each_segment for empty chunks When a parsed chunk list contains a chunk whose ch_segcount is zero, pcl_for_each_segment computes its inclusive upper bound as &chunk->ch_segments[ch_segcount - 1]. ch_segcount is u32, so the subtraction wraps to 0xFFFFFFFF and the bound lands far past the ch_segments flex array. The loop body then walks unrelated memory at sizeof(struct svc_rdma_segment) stride until it faults. A zero-segcount chunk is reachable from the wire: xdr_check_write_chunk() only rejects segcount values greater than rc_maxpages, and pcl_alloc_write() links a freshly allocated chunk onto rc_write_pcl/rc_reply_pcl before its segment-fill loop runs, so a Write or Reply chunk advertising zero segments leaves ch_segcount == 0 on the list. When the transport has negotiated Send-With-Invalidate, svc_rdma_get_inv_rkey() iterates all four PCLs with pcl_for_each_segment and dereferences segment->rs_handle on each iteration, turning the underflow into an out-of-bounds read and a general protection fault. xdr_check_write_list / xdr_check_reply_chunk pcl_alloc_write() chunk = pcl_alloc_chunk(...) /* ch_segcount = 0 */ list_add_tail(&chunk->ch_list, &pcl->cl_chunks) /* fill loop iterates zero times for wire segcount 0 */ svc_rdma_get_inv_rkey() pcl_for_each_chunk(rc_write_pcl) pcl_for_each_segment(segment, chunk) pos <= &ch_segments[0u - 1u] /* 0xFFFFFFFF */ segment->rs_handle /* OOB read -> GPF */ Fix by switching the macro to a half-open upper bound that uses ch_segcount directly. For ch_segcount == 0 the loop start equals the loop end and the body is skipped; for ch_segcount > 0 the iteration range is unchanged. All six existing call sites in net/sunrpc/xprtrdma/svc_rdma_recvfrom.c and net/sunrpc/xprtrdma/svc_rdma_rw.c remain correct under the new bound, so no caller changes are needed. | ||||
| CVE-2026-89530 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Reject inline replies that overflow the pull-up buffer An RPC-over-RDMA client can request a reply, such as an NFS READ payload, without providing a Write list or a Reply chunk to carry it. When such a reply needs more scatter/gather entries than the device's Send Queue supports, svc_rdma_pull_up_needed() selects pull-up and svc_rdma_pull_up_reply_msg() linearizes the whole reply into sctxt->sc_xprt_buf. That buffer is only sc_max_req_size bytes, while the reply on this path is bounded only by the client's request, so svc_rdma_xb_linearize() copies past the end of the buffer and corrupts adjacent slab memory. The oversized length is then stored in sc_sges[0].length and posted, so the device also reads beyond the mapped region. The SGE-exhaustion branch is the only pull-up path that can exceed the buffer: the threshold branch pulls up only replies smaller than RPCRDMA_PULLUP_THRESH, and replies that fit the device's SGE budget are sent directly without linearization. Make svc_rdma_pull_up_needed() report -E2BIG when the reply it would pull up cannot fit sc_max_req_size, and fail the request with ERR_CHUNK as RFC 8166 Section 4.5.3 directs rather than dropping the connection. The helper no longer answers a simple yes/no question: it now reports pull-up, no pull-up, or -E2BIG for a reply too large to linearize. Rename svc_rdma_pull_up_needed() to svc_rdma_check_pull_up() so its name no longer implies a boolean predicate. | ||||
| CVE-2026-89528 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Reject Read lists that exceed the page budget Individual Read segment lengths are validated at decode time, but nothing prevents a requester from sending multiple segments whose cumulative length exceeds the rq_pages array budget. When one segment fills the page array exactly, the runtime guard in svc_rdma_build_read_segment() is bypassed because len reaches zero. A subsequent segment then accesses the NULL sentinel slot at rq_pages[rq_maxpages], resulting in a NULL pointer dereference during DMA mapping. Accumulate pages across all Read segments and reject the message at decode time when the total would overflow the page budget. | ||||
| CVE-2026-89526 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Validate Read chunk positions before reconstruction The RPC/RDMA Read chunk position field is supplied by the remote client and stored verbatim in the parsed chunk list. xdr_count_read_segments() checks only 4-byte alignment; it never compares the position against the received inline body length. In the single-chunk path, svc_rdma_read_complete_one() splits the head and tail kvecs at ch_position. A position past the inline body underflows the tail length, exposing adjacent slab memory to the upper XDR decoder. In the multi-chunk path, svc_rdma_read_multiple_chunks() computes gap lengths between chunks as unsigned subtractions from ch_position. Overlapping Read chunks cause these subtractions to underflow. A final position past the inline body likewise underflows the trailing gap length. svc_rdma_copy_inline_range() then copies past the receive buffer into request pages that are returned to the client through the Reply channel. Bound inline-range copies in svc_rdma_copy_inline_range() against the decoded inline RPC body saved in rc_saved_arg. Reject a single Read chunk positioned beyond that body, and reject multi-chunk lists where accumulated read bytes exceed the next chunk's position. Apply the same position and overlap checks in the call-chunk interleaving path. | ||||
| CVE-2026-89511 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: qede: Fix NULL pointer dereference in TPA fragment processing Under memory pressure, the qede driver encounters NULL pointer dereferences when processing TPA continuation fragments. Commit 8a8633978b84 ("qede: Add build_skb() support.") accidentally dropped the assignment of tpa_info->buffer.data in qede_tpa_start(). When memory pressure causes an SKB allocation failure in qede_tpa_start(), the driver sets tpa_start_fail = true and attempts to recycle the physical page later in qede_tpa_end() via qede_reuse_page(). However, because buffer.data was left uninitialized (NULL), qede_reuse_page() pushes a "ghost" BD (valid DMA mapping but NULL data pointer) back into the active Rx ring. The next time the hardware uses this ring slot, it passes a NULL page to qede_fill_frag_skb(), causing a kernel panic. Example crash from production system: BUG: unable to handle kernel NULL pointer dereference at 0x8 RIP: qede_fill_frag_skb+0x96/0x430 [qede] Call Trace: qede_rx_int+0xb06/0x1de0 qede_poll+0x2f4/0x6c0 __napi_poll+0x2d/0x130 Fix the root cause by restoring the tpa_info->buffer.data assignment in qede_tpa_start(), ensuring valid pages are correctly tracked and recycled. Additionally, update the stale comment for struct qede_agg_info::buffer to reflect its current usage. | ||||
| CVE-2026-89510 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/cxgb4: Cancel reg_work before freeing device on remove c4iw_uld_state_change() queues reg_work to register the RDMA device. c4iw_remove() can free ctx->dev while this work is pending or running, leaving c4iw_register_device() accessing the freed device. Cancel reg_work before removing the device. The registration work can tear down ctx->dev when registration fails, so do not unregister or deallocate it again in that case. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-89488 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: openvswitch: Fix CT limit teardown use-after-free Packet processing uses CT limit state under RCU, while netns teardown frees that state under ovs_mutex. The CT limit pointer was neither removed from readers nor protected by a grace period, allowing packet processing to dereference the freed state. An unprivileged user can trigger this bug from a user and network namespace, causing a slab-use-after-free in ovs_ct_execute() when the netns is torn down. Publish the CT limit pointer through RCU, remove it before teardown, and wait for readers before freeing its contents. Keep ovs_mutex around individual CT limit updates, and use the RCU read-side lock while GET traverses the RCU-protected limit lists. Netns teardown detaches the RCU-protected CT limit state in the pernet .pre_exit callback while holding ovs_mutex. The pernet core guarantees an RCU grace period between the .pre_exit and .exit callbacks, so the .exit callback completes the teardown without adding any extra synchronization. The netlink command handlers do not need NULL checks because the userspace netlink socket holds an active reference to its network namespace while a request is processed. The per-netns exit path therefore cannot run concurrently with SET, DEL, or GET for that socket's namespace. | ||||
| CVE-2026-89487 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: openvswitch: only skb_tx_error() a packet we are about to drop queue_userspace_packet() borrows the packet skb -- it only copies it into a private netlink message (user_skb) and does not own it; on return do_execute_actions() keeps forwarding it through the flow's remaining actions. Its error path nevertheless calls skb_tx_error(skb), which via skb_zcopy_clear() does skb_shinfo(skb)->flags &= ~SKBFL_ALL_ZEROCOPY, stripping SKBFL_SHARED_FRAG from that live skb (skb_tx_error()'s kerneldoc says "skb must be freed afterwards"). For a MSG_ZEROCOPY skb carrying page-cache frags, SKBFL_SHARED_FRAG is what makes esp_input() skb_cow_data() before in-place AEAD; once it is stripped a later local ESP-in-UDP delivery decrypts in place over pages the sender does not own -- an unprivileged page-cache write (the "Fragnesia" primitive). do_execute_actions() ignores output_userspace()'s return value, so any action after a failed USERSPACE upcall inherits the stripped skb. Move the skb_tx_error() to the flow-miss drop path - the "default" branch of ovs_dp_process_packet()'s switch(error), before kfree_skb(). The call has been here since commit 36d5fe6a0007 ("core, nfqueue, openvswitch: Orphan frags in skb_zerocopy and handle errors") but was harmless until esp_input() began relying on SKBFL_SHARED_FRAG to gate in-place decrypt; only then did stripping it on a still-forwarded skb become a page-cache write primitive. | ||||
| CVE-2026-89483 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme: zero the discard fallback page nvme_setup_discard() always maps sizeof(struct nvme_dsm_range) * NVME_DSM_MAX_RANGES = 4096 bytes as the DSM payload however many ranges the command declares, because some devices ignore the 'Number of Ranges' field - the Fixes: commit records two that read past the declared ranges. A single-range discard fills only the first 16 bytes. Normally the buffer comes from kzalloc() and the other 4080 bytes are zero. When that allocation fails the code falls back to the per-controller ctrl->discard_page, which nvme_init_ctrl() obtains with alloc_page(GFP_KERNEL) and nothing ever zeroes, so those 4080 bytes are whatever the page last held and are handed to the controller. Reaching it requires the kzalloc(GFP_ATOMIC | __GFP_NOWARN) to fail, that is memory pressure; it is not remotely triggerable. Failing the allocation under KMSAN reproduces it, with the leaked tail full of vmemmap struct page pointers. The extent in the report is a partial transfer of the payload, not the whole 4096 bytes; the 16-byte boundary in it is the one declared range: [ 11.991601] BUG: KMSAN: uninit-value in dma_map_phys+0x14c8/0x1900 [ 11.991969] dma_map_phys+0x14c8/0x1900 [ 11.992220] dma_map_page_attrs+0xcf/0x130 [ 11.992485] e1000_xmit_frame+0x4099/0x6d10 [ 11.992768] dev_hard_start_xmit+0x22f/0xa80 [ 11.993068] sch_direct_xmit+0x35c/0xcb0 [ 11.993315] __dev_queue_xmit+0x1ee5/0x5eb0 [ 11.993608] ip_finish_output2+0x1903/0x1c30 [ 11.993881] ip_finish_output+0x288/0x870 [ 11.994125] ip_output+0x15e/0x400 [ 11.994365] __ip_queue_xmit+0x1e85/0x1fb0 [ 11.994639] ip_queue_xmit+0x60/0x80 [ 11.994899] __tcp_transmit_skb+0x4e71/0x5fa0 [ 11.995210] tcp_write_xmit+0x3a36/0x9160 [ 11.995533] __tcp_push_pending_frames+0xc5/0x3c0 [ 11.995854] tcp_push+0x7dc/0x840 [ 11.996076] tcp_sendmsg_locked+0x766c/0x8400 [ 11.996371] tcp_sendmsg+0x4b/0x90 [ 11.996572] inet_sendmsg+0x134/0x2a0 [ 11.996823] __sock_sendmsg+0x265/0x360 [ 11.997076] sock_sendmsg+0x100/0x1e0 [ 11.997293] nvme_tcp_try_send+0x196f/0x6370 [ 11.997605] nvme_tcp_queue_rq+0x1d54/0x20b0 [ 11.997882] blk_mq_dispatch_rq_list+0x5ee/0x2e50 [ 11.998175] __blk_mq_sched_dispatch_requests+0x16dc/0x24a0 [ 11.998539] blk_mq_sched_dispatch_requests+0x11b/0x2c0 [ 11.998865] blk_mq_run_work_fn+0x13b/0x280 [ 11.999146] process_scheduled_works+0x966/0x1ad0 [ 11.999465] worker_thread+0xe44/0x1480 [ 11.999709] kthread+0x53b/0x600 [ 11.999927] ret_from_fork+0x29f/0x7c0 [ 12.000191] ret_from_fork_asm+0x1a/0x30 [ 12.000460] [ 12.000558] Uninit was created at: [ 12.000788] __alloc_frozen_pages_noprof+0x8bf/0xd30 [ 12.001096] alloc_pages_mpol+0x1d0/0x5f0 [ 12.001326] alloc_pages_noprof+0x102/0x290 [ 12.001627] nvme_init_ctrl+0x5a3/0x9f0 [ 12.001891] nvme_tcp_create_ctrl+0xd75/0x19b0 [ 12.002170] nvmf_dev_write+0x4c68/0x4fd0 [ 12.002426] vfs_write+0x587/0x1a10 [ 12.002636] __x64_sys_write+0x207/0x4f0 [ 12.002874] x64_sys_call+0x2ff0/0x3ea0 [ 12.003123] do_syscall_64+0x147/0x3b0 [ 12.003400] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 12.003680] [ 12.003777] Bytes 16-2843 of 2844 are uninitialized [ 12.004068] Memory access of size 2844 starts at ffff888109f82000 [ 12.004412] [ 12.004530] CPU: 0 UID: 0 PID: 101 Comm: kworker/0:1H Not tainted 7.2.0-rc5-NVMECTL-gf5098b6bae76 #1 PREEMPT(lazy) [ 12.005127] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 12.005762] Workqueue: kblockd blk_mq_run_work_fn [ 12.006073] ===================================================== Allocate the page with __GFP_ZERO. The single allocation site covers every use of it: bytes no discard has written stay zero, and bytes one did write hold that controller's own range list, which it has already been sent. | ||||
| CVE-2026-89482 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: do not accept C2HData based on blk_rq_payload_bytes() alone Commit 25e5cb780e62 ("nvme-tcp: fix possible crash in write_zeroes processing") established that blk_rq_payload_bytes() must not be read without first checking blk_rq_nr_phys_segments(), and recorded the result in nvme_tcp_setup_cmd_pdu() as req->data_len. The receive side was left as it was. The two differ for REQ_OP_WRITE_ZEROES, which has no physical segments but a non-zero blk_rq_bytes(), so setup leaves req->iter untouched while the receive gate lets a C2HData through and nvme_tcp_recv_data() copies into whatever the previous command on that tag left there. The driver-private area is zeroed only when the tag set is allocated. Reproduced with a test target that leaves a residual iterator on a tag and then sends a C2HData for a WRITE_ZEROES command on the same tag: BUG: KASAN: wild-memory-access in _copy_to_iter+0x642/0x1330 Write of size 512 at addr ffe728c2175dfa81 by task kworker/0:1H/103 CPU: 0 UID: 0 PID: 103 Comm: kworker/0:1H Not tainted 7.2.0-rc5-NVMETCP-gf5098b6bae76 #1 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: nvme_tcp_wq nvme_tcp_io_work Call Trace: <TASK> dump_stack_lvl+0x53/0x70 kasan_report+0xce/0x100 ? _copy_to_iter+0x642/0x1330 kasan_check_range+0x105/0x1b0 __asan_memcpy+0x3c/0x60 _copy_to_iter+0x642/0x1330 ? __pfx_sock_has_perm+0x10/0x10 ? worker_thread+0x45b/0xd10 ? __pfx__copy_to_iter+0x10/0x10 ? _raw_spin_lock_bh+0x83/0xe0 ? __pfx__raw_spin_lock_bh+0x10/0x10 __skb_datagram_iter+0xf3/0x820 ? __pfx_simple_copy_to_iter+0x10/0x10 ? __asan_memcpy+0x3c/0x60 ? skb_copy_bits+0x58d/0x830 skb_copy_datagram_iter+0x37/0x120 nvme_tcp_recv_skb+0xa07/0x4320 ? __pfx_nvme_tcp_recv_skb+0x10/0x10 __tcp_read_sock+0x1ab/0x810 ? __pfx_nvme_tcp_recv_skb+0x10/0x10 ? __pfx_lock_sock_nested+0x10/0x10 ? __pfx___tcp_read_sock+0x10/0x10 nvme_tcp_try_recv+0x152/0x1e0 ? __pfx_nvme_tcp_try_recv+0x10/0x10 ? __pfx_mutex_unlock+0x10/0x10 nvme_tcp_io_work+0x1e4/0x6c0 ? __schedule+0x181a/0x49f0 ? __pfx_nvme_tcp_io_work+0x10/0x10 process_one_work+0x633/0x1030 Keep the blk_rq_payload_bytes() test and add req->data_len to it. The old test is what rejects a C2HData naming a tag that is no longer in flight, because blk_update_request() zeroes rq->__data_len on completion; req->data_len and req->curr_bio are driver-private and survive completion, so they cannot stand in for it. Setup initialises the iterator only when both req->curr_bio and req->data_len are set, so the gate now tests the same two. | ||||
| CVE-2026-89481 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix host memory disclosure on R2T for a read command nvme_tcp_handle_r2t() does not check the direction of the request the R2T refers to. A malicious controller can send an R2T for a READ and the host will answer it: nvme_tcp_setup_h2c_data_pdu() builds the H2CData header and nvme_tcp_try_send_data() sends the request's data buffer. That buffer is the READ destination, so its contents go to the controller. The command then completes normally and nothing is logged. Against a test controller that answers every READ with an R2T, a 4096 byte buffered read returned all 4096 bytes, split over two R2Ts. The pages contained stale kernel data, including an array of struct page pointers. Reject an R2T for a request that is not a write. | ||||
| CVE-2026-89480 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: reject a read that transferred too few bytes nvme_tcp_recv_data() completes a request once the current C2HData PDU has been consumed. Nothing compares the total bytes received against the length the command asked for: struct nvme_tcp_request has no receive-side counter, queue->data_remaining is per queue, and blk_mq_end_request() completes for blk_rq_bytes(rq) unconditionally with no residual concept anywhere above. A controller can therefore answer a 4096-byte read with 512 bytes and have it reported as a complete read; user space then gets 4096 bytes of which 3584 are whatever was already in the page. I reproduced that with a test target. Count the bytes received and refuse to complete a successful read whose count does not match, at the two NVME_TCP_F_DATA_SUCCESS paths and in nvme_tcp_process_nvme_cqe(). The success test shifts req->status right by one, because the driver keeps the wire value there and shifts it on completion, so the check must see what the completion path will see. Only REQ_OP_READ is checked, because there the length comes from the sectors the request covers; a passthrough command is built by its submitter, which picks both command and buffer, so the kernel has nothing to compare against. | ||||