Export limit exceeded: 410259 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 410259 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 410259 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 410259 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (410259 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99999 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: validate checksum_start before completing checksum If a packet with bad checksum metadata gets into the ipv4 stack, skb_checksum_help can corrupt the network header and cause a bunch of mischief. This was discovered and reported by Paulos, and has been reporoduced by others independently since. We really shouldn't allow such packets in, but as a defence in depth measure, let's also check before we complete the checksum. A more complete validation at input is forthcoming, but needs more work. | ||||
| CVE-2026-98433 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: fix secure device page leak on uv_page_in() failure In kvmppc_svm_page_in(), if uv_page_in() fails after kvmppc_uvmem_get_page() has succeeded, the secure device page is never released. kvmppc_uvmem_get_page() sets a bit in kvmppc_uvmem_bitmap, allocates a kvmppc_uvmem_page_pvt struct, marks the GFN as KVMPPC_GFN_UVMEM_PFN, and calls zone_device_page_init() which sets refcount=1 and locks the page. The subsequent goto out_finalize skips the *mig.dst assignment, so migrate_vma_finalize() is a no-op for the page, and none of those resources are ever reclaimed. Each occurrence permanently consumes one entry from the firmware-bounded secure memory pool (kvmppc_uvmem_bitmap), leaks pvt, and leaves the GFN marked as secure — making it unusable for the lifetime of the VM. The twin __kvmppc_svm_page_out() already handles the analogous uv_page_out() failure correctly with unlock_page(dpage); __free_page(dpage). Apply the same pattern here: unlock_page() followed by put_page(), which chains through free_zone_device_folio() into kvmppc_uvmem_folio_free() to clear the bitmap bit, free pvt, and reset the GFN state. Reachable whenever uv_page_in() returns an error (e.g. UV pool exhaustion) on any POWER9/10 + Ultravisor/PEF system. | ||||
| CVE-2026-94229 | 2026-10-19 | 5.3 Medium | ||
| The TrueBooker WordPress plugin before 1.3.0 does not verify that the requester owns a booking before rendering its confirmation summary, allowing unauthenticated attackers to enumerate booking identifiers and retrieve the personal information of customers who booked an appointment, as well as invalidate the customer's own confirmation link. | ||||
| CVE-2026-91046 | 2026-10-19 | 4.3 Medium | ||
| The ElementsReady Addons for Elementor WordPress plugin through 6.7.2 does not perform authorization checks that halt execution in several of its settings-save handlers, allowing users with subscriber-level access and above to overwrite the ElementsReady Addons for Elementor WordPress plugin through 6.7.2's stored settings, including its stored API credentials and its feature and template configuration. | ||||
| CVE-2026-86791 | 2026-10-19 | 5.3 Medium | ||
| The iPOSpays Payment Gateway for WooCommerce WordPress plugin before 1.4.7 does not verify that a payment was actually completed before recording an order as paid, allowing unauthenticated users to mark any unpaid order as paid and to rewrite its total. | ||||
| CVE-2026-106933 | 2026-10-19 | 6.8 Medium | ||
| The Blaze Demo Importer WordPress plugin before 1.0.17 does not sanitize uploaded SVG files and registers the SVG MIME type for the WordPress media library unconditionally, allowing authenticated users with the Author role or higher to upload a crafted SVG that executes arbitrary JavaScript in the browser of any user who opens the file. | ||||
| CVE-2026-112104 | 1 Eremef | 1 Bandcamp-player | 2026-10-19 | 7.3 High |
| A flaw has been found in eremef bandcamp-player up to 1.8.33-beta. The impacted element is an unknown function of the file database.ts of the component Remote Control Server. Executing a manipulation of the argument remoteEnabled can lead to missing authentication. The attack may be launched remotely. Upgrading to version 1.8.34-beta is sufficient to resolve this issue. This patch is called ccba99b66bc61acf46e4a332034799d7452ddea6. Upgrading the affected component is advised. | ||||
| CVE-2026-97348 | 2 Gpriday, Wordpress-extensions | 2 Siteorigin Widgets Bundle, Siteorigin Widgets Bundle | 2026-10-19 | 6.5 Medium |
| The SiteOrigin Widgets Bundle plugin for WordPress is vulnerable to Directory Traversal in all versions up to, and including, 1.74.3 via the get_instance_css function. This makes it possible for authenticated attackers, with contributor-level access and above, to read the contents of arbitrary files on the server, which can contain sensitive information. The widget's normal update()/sanitize_field_input() pipeline — which would reject non-hex color values — is bypassed entirely because the [siteorigin_widget] shortcode handler calls $the_widget->widget() directly on the attacker-supplied decoded JSON instance. | ||||
| CVE-2026-104725 | 2 Trainingbusinesspros, Wordpress-extensions | 2 Groundhogg — Crm, Newsletters, And Marketing Automation, Groundhogg | 2026-10-19 | 8.8 High |
| The Groundhogg — CRM, Newsletters, and Marketing Automation plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 4.9 This is due to a missing ownership and capability check on the `user` parameter within the `process_edit()` function, which allows any authenticated user with the `edit_contacts` capability to reassign a contact record's linked WordPress user ID to any arbitrary account without requiring the `edit_users` or `promote_users` capabilities. This makes it possible for authenticated attackers, with sales_rep-level access and above, to escalate their privileges to administrator by linking a contact to an administrator's WordPress user ID, then creating a note containing the `{auto_login_link}` replacement tag to trigger generation of a valid auto-login permissions-key URL for the administrator-linked contact, and finally visiting that URL to authenticate as the targeted administrator. The auto-login URL is stored in the note content and is readable back by the attacker via the `view_notes` and `add_notes` capabilities that the sales_rep role holds by default. | ||||
| CVE-2026-112102 | 1 Axa Group | 1 Nlp.js | 2026-10-19 | 6.3 Medium |
| A vulnerability was detected in AXA Group NLP.js 4.27.0. This impacts the function Evaluator.walkFunction of the file packages/evaluator/src/evaluator.js of the component Condition Expression Pipeline. The manipulation of the argument condition results in code injection. It is possible to launch the attack remotely. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-96653 | 2 Wordpress-extensions, Wpdirectorykit | 2 Wp Directory Kit, Wp Directory Kit | 2026-10-19 | 6.5 Medium |
| The WP Directory Kit plugin for WordPress is vulnerable to time-based SQL Injection via 'display_name' Profile Field (Second-Order) in all versions up to, and including, 1.5.9 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with subscriber-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. This is a second-order injection: a Subscriber stores a display_name containing a single quote via their own profile, which WordPress preserves verbatim; the payload is then triggered when WdkCachedUserEditor::update_listings_user_editor() re-reads that stored value and passes it unsanitized to the SQL sink. | ||||
| CVE-2026-112101 | 1 Blackbelttechnology | 1 Pi-agent-dashboard | 2026-10-19 | 4.3 Medium |
| A vulnerability was determined in BlackBeltTechnology pi-agent-dashboard up to 0.8.0. The affected element is an unknown function of the file /BlackBeltTechnology/pi-agent-dashboard of the component WebSocket Gateway. Executing a manipulation of the argument cwd can lead to origin validation error. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized. Upgrading to version 0.9.0 is sufficient to fix this issue. This patch is called 48fd0bad5adfe76af9736599699d51a5f60019f6. It is recommended to upgrade the affected component. | ||||
| CVE-2026-112192 | 1 Misp | 1 Misp | 2026-10-19 | N/A |
| MISP contains a vulnerability in the handling of module plugin settings. When the server rebuilds module-supplied settings for API consumption, it drops the redacted and cli_only flags that a module declares in its own configuration metadata. As a result: - A module that marks a setting (such as an API key) as redacted still has its value returned in full by the servers/getSetting and servers/serverSettingsEdit endpoints, exposing sensitive credentials to any authenticated user who can read server settings. - A module that marks a setting as cli_only (intended to be editable only via the command-line interface) can still be modified through the web API, bypassing the intended access restriction. An authenticated user with access to server settings can therefore read sensitive module credentials and modify settings that the module author intended to restrict to CLI-only access. Affected: <2.5.48 | ||||
| CVE-2026-112188 | 1 Misp | 1 Misp | 2026-10-19 | N/A |
| MISP contains a vulnerability in its server settings lookup mechanism that allows an authenticated user to retrieve sensitive configuration data that should have been redacted. The settings lookup function resolves a dotted setting name to a node in the configuration tree. When a branch name (such as Security, MISP, or Plugin) is supplied instead of a specific leaf setting, the function returns the entire sub-tree. Because a branch node does not carry a redaction flag, the redaction check in the settings retrieval endpoint is bypassed, and the full branch contents are returned to the caller. This exposes sensitive values including the security salt, Redis connection passwords, and plugin API keys. A second endpoint that edits server settings similarly reads the entire configuration store when a branch name is resolved, returning all settings to the caller. The impact is disclosure of sensitive server configuration secrets to any user who can access the server settings endpoints. Affected versions: <2.5.48. | ||||
| CVE-2026-112184 | 1 Misp | 1 Misp | 2026-10-19 | N/A |
| MISP contains a reflected cross-site scripting (XSS) vulnerability in the workflow module interface. Parameter names returned by the misp-modules service are rendered as raw HTML form labels on the workflow module page without output encoding. An attacker who can influence the parameter names reported by the misp-modules service can inject arbitrary HTML or JavaScript that executes in the context of an authenticated MISP user's browser. Preconditions: - The attacker must be able to control or influence parameter names reported by the misp-modules service. - A victim must be authenticated and view the affected workflow module page. Impact: - Execution of arbitrary JavaScript in the victim's browser session. - Potential theft of session tokens, manipulation of the MISP interface, or initiation of unauthorized actions on behalf of the victim. Affected versions: <2.5.48. | ||||
| CVE-2026-89763 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: Fix TPM teardown ordering trusted_tpm_exit() drops the TPM chip reference and frees the digest array before unregistering the trusted key type. key_type_lookup() holds key_types_sem for reading until the key operation finishes, while unregister_key_type() takes it for writing. It therefore provides the synchronization point that must precede backend teardown. The current order permits this interleaving: CPU 0 CPU 1 trusted_tpm_exit() key_type_lookup("trusted") put_device(&chip->dev) trusted_tpm_seal() kfree(digests) pcrlock() unregister_key_type() tpm_pcr_extend(..., digests) CPU 1 can consequently dereference the freed digest array. The chip can also be released before callbacks stop using it. KASAN reported: BUG: KASAN: slab-use-after-free in tpm_pcr_extend+0x1f0/0x200 Read of size 2 at addr ffff88810872d000 by task poc/89 Call Trace: tpm_pcr_extend+0x1f0/0x200 pcrlock+0x42/0x70 [trusted] trusted_tpm_seal+0x1b6/0x570 [trusted] trusted_instantiate+0x293/0x340 [trusted] __key_instantiate_and_link+0xb2/0x2b0 __key_create_or_update+0x61e/0xb50 __do_sys_add_key+0x1b8/0x310 Allocated by task 88: __kmalloc_noprof+0x1a7/0x490 do_one_initcall+0xa1/0x390 do_init_module+0x2df/0x840 Freed by task 90: kfree+0x131/0x3c0 trusted_tpm_exit+0x59/0xa0 [trusted] __do_sys_delete_module+0x346/0x510 Move unregister_key_type() before releasing either resource. This stops new lookups and waits for in-flight key operations to finish before the backend state is destroyed. | ||||
| CVE-2026-89711 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: remove flawed WARN_ON_ONCE from nfsd_mode_check The header for commit e75b23f9e323 ("nfsd: check d_can_lookup in fh_verify of directories") details the assumption that justified adding the WARN_ON_ONCE to nfsd_mode_check(), that assumption is invalid (in the case of NFS reexport). When NFSD exports an NFS filesystem it is very possible for nfsd_mode_check() to encounter a @dentry that doesn't have i_op->lookup (see nfs_fhget()'s NFS_ATTR_FATTR_MOUNTPOINT and NFS_ATTR_FATTR_V4_REFERRAL handling, and d_flags_for_inode()). So remove nfsd_mode_check()'s WARN_ON_ONCE(). The nfserr_notdir return on that branch must stay. It guards the subsequent lookup_one_unlocked() -> __lookup_slow() path, which calls inode->i_op->lookup() with no NULL check, so returning nfserr_notdir is what keeps a client LOOKUP into such a @dentry from dereferencing a NULL method pointer. | ||||
| CVE-2026-89709 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: lockd, nfsd: RCU-protect nlmsvc_ops dispatch nlmsvc_ops is published by nfsd_lockd_init() and cleared by nfsd_lockd_shutdown() with plain stores, while lockd dereferences it unguarded from dispatch sites in fs/lockd/svcsubs.c. The pointer targets nfsd's .rodata and the fopen/fclose callbacks live in nfsd's .text, so a stale load after rmmod nfsd results in either a NULL deref or a module-text use-after-free. Declare nlmsvc_ops as __rcu, publish via rcu_assign_pointer(), clear via RCU_INIT_POINTER() + synchronize_rcu(). Add a struct module *owner field to nlmsvc_binding and pin the module across indirect calls with try_module_get/module_put. When the binding is torn down, fall back to fput() to avoid leaking struct file references. | ||||
| CVE-2026-112183 | 1 Misp | 1 Misp | 2026-10-19 | N/A |
| MISP contains a CSS injection vulnerability in the remote event preview feature. When a user previews an event from a linked MISP server, the colour value associated with each remote tag is written directly into an inline CSS style attribute without sufficient validation. Although HTML entity encoding is applied, the value is interpreted as CSS within the style attribute, allowing a malicious or compromised linked server to inject arbitrary CSS declarations. An attacker with the ability to create or modify tags on a linked MISP instance can craft a tag colour value containing CSS injection payloads. When a user on the local instance views the event preview, the injected CSS is rendered, potentially allowing UI manipulation, visual spoofing, or limited information disclosure through CSS-based techniques. Preconditions: - A linked MISP server relationship exists between the victim instance and the attacker-controlled instance. - The attacker can create or modify tags on the linked server. - A victim user views the remote event preview page. Affected: <2.5.48. | ||||
| CVE-2026-112100 | 1 Deeppavlov | 1 Deeppavlov | 2026-10-19 | 5.5 Medium |
| A vulnerability was determined in DeepPavlov up to 1.7.0. This affects the function MultiTaskPipelinePreprocessor.__init__ of the file deeppavlov/models/preprocessors/multitask_preprocessor.py. This manipulation of the argument preprocessor causes code injection. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet. | ||||