Export limit exceeded: 15319 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 409325 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409325 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80601 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: gw: acquire ethernet header only after skb realloc The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer behind the skb. Variables which were pointing to the old buffer need to be reassigned to avoid an use-after-free. | ||||
| CVE-2026-80599 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: dat: ensure accessible eth_hdr proto field When batadv_get_vid() accesses the proto field of the ethernet header, it is not checking if the data itself is accessible. The caller is responsible for it. But in contrast to other call sites, batadv_dat_get_vid() and its caller didn't make sure this is true. This could have caused an out-of-bounds access. | ||||
| CVE-2026-80598 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs3: fix out-of-bounds read in decompress_lznt decompress_lznt() does not validate array index bounds before accessing the decompression table. A corrupted NTFS3 image with invalid compressed data can trigger an out-of-bounds read. Add index bounds checking to prevent the OOB access. | ||||
| CVE-2026-80593 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (asus_atk0110) Check package count before accessing element atk_ec_present() walks the management group package returned by the GGRP ACPI method and, for each sub-package, reads its first element: id = &obj->package.elements[0]; if (id->type != ACPI_TYPE_INTEGER) without checking that the sub-package is non-empty. ACPICA allocates the element array with exactly package.count entries, so for a sub-package with a zero count this reads past the allocation. The sibling function atk_debugfs_ggrp_open() performs the same access but skips empty packages with a package.count check first. Add the same check to atk_ec_present() so a malformed firmware package cannot trigger an out-of-bounds read. | ||||
| CVE-2026-80590 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.6 High |
| In the Linux kernel, the following vulnerability has been resolved: inet: frags: strip GSO state from fragments before reassembly A virtio_net_hdr (tun/tap, or AF_PACKET with PACKET_VNET_HDR) can mark an IPv4 or IPv6 fragment as GSO; nothing relates gso_type to frag_off. inet_frag_reasm_prepare()/inet_frag_reasm_finish() keep the first fragment's skb as the head of the reassembled datagram, including its shinfo->gso_size/gso_type/gso_segs, and chain the remaining fragments on frag_list with whatever linear/paged layout they arrived with. After ip_defrag() (ip_local_deliver(), nf_defrag_ipv4, ...) the reassembled skb therefore still claims to be GSO (SKB_GSO_DODGY), and the next software segmentation point - udp_rcv_segment() on local delivery, validate_xmit_skb(), or the ip_finish_output_gso() slow path - hands it to skb_segment(). skb_segment()'s frag_list walk assumes GRO-shaped input and hits one of its BUG_ON()s. Two writes to a tap by an unprivileged user in its own userns are enough: kernel BUG at net/core/skbuff.c:4899! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 1000 PID: 82 Comm: poc Not tainted 7.2.0-pentest+ #2 RIP: 0010:skb_segment+0x20ca/0x48b0 Call Trace: <TASK> __udp_gso_segment+0x29a/0x27d0 udp4_ufo_fragment+0x458/0x6c0 inet_gso_segment+0x429/0x1340 skb_mac_gso_segment+0x233/0x4f0 __skb_gso_segment+0x308/0x660 udp_queue_rcv_skb+0x440/0xad0 udp_unicast_rcv_skb+0xc7/0x2c0 udp_rcv+0x16ce/0x2260 ip_protocol_deliver_rcu+0x197/0x2d0 ip_local_deliver+0x430/0x690 ip_rcv+0x16f/0x1f0 __netif_receive_skb_one_core+0x15e/0x1c0 __netif_receive_skb+0x1e/0x110 netif_receive_skb+0xf6/0x5c0 tun_rx_batched.isra.0+0x3ab/0x790 tun_get_user+0x17c3/0x3550 tun_chr_write_iter+0xba/0x1b0 vfs_write+0x646/0x1130 </TASK> Kernel panic - not syncing: Fatal exception in interrupt This runs with BH disabled, so it is a panic rather than an oops. The same is reachable with CAP_NET_RAW in a netns where a defrag point precedes a GSO point, and from a guest whose VMM forwards virtio_net_hdr to a tap. The SKB_GSO_DODGY frag_list checks added by commit 3dcbdb134f32 ("net: gso: Fix skb_segment splat when splitting gso_size mangled skb having linear-headed frag_list") and by commit 9e4b7a99a03a ("net: gso: fix panic on frag_list with mixed head alloc types") do not cover it: page-backed heads skip them, and kmalloc heads skip them when gso_size == skb_headlen(head), which the sender controls. An skb entering a frag queue is an IP fragment by definition and cannot legitimately carry GSO state: GRO does not merge fragments and the stack segments before it fragments, so only untrusted sources are affected. This has been reachable since commit f43798c27684 ("tun: Allow GSO using virtio_net_hdr"), the first path that let userspace attach GSO metadata to an IP fragment. Reset the GSO fields of every fragment as it is queued, in inet_frag_queue_insert(), which IPv4, IPv6, nf_conntrack_reasm and 6lowpan reassembly share; then neither the head nor the frag_list members of the reassembled skb carry them (the members matter too: the ip_do_fragment()/ip6_fragment() fast paths send them out as they are). The head may remain CHECKSUM_PARTIAL; that is already accepted on receive and resolved by skb_checksum_help() in ip_do_fragment()/ip6_fragment() on forward. Tested on top of net.git (dc4b95b8fee9), x86_64: the tap reproducer above, two further IPv4 frag_list geometries that reach BUG_ON(i >= nfrags) and BUG_ON(!list_skb->head_frag), and an IPv6 fragment-header variant (udp6_ufo_fragment()) each panic the unpatched kernel; with this patch all four datagrams are delivered intact and nothing is logged. | ||||
| CVE-2026-80589 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: block: stop the timeout timer when releasing a never added disk disk_release() undoes blk_mq_init_allocated_queue() for a disk whose probe failed before add_disk(), but it only calls blk_mq_exit_queue(). Nothing there stops q->timeout, and that timer rolls forward: it stays pending until it next expires, not until the last request completes. So if the driver issued any I/O before adding the disk, the request_queue is freed while still linked into a timer wheel bucket. Commit 6f8191fdf41d ("block: simplify disk shutdown") dropped the blk_cleanup_queue() call that used to stop it. __del_gendisk() and blk_mq_destroy_queue() still do; only the probe failure path lost it. nvme gets there because nvme_update_ns_info() submits Report Zones or FDP io-mgmt-recv on ns->queue before the disk is added, so a later failure - a concurrent reset setting NVME_CTRL_FROZEN, or device_add_disk() failing - lands in put_disk() with the timer armed: BUG: KASAN: slab-use-after-free in detach_if_pending+0x30c/0x340 Write of size 8 at addr ffff888004d71310 by task kworker/u8:2/37 __timer_delete_sync+0x156/0x240 kernel/time/timer.c:1621 blk_sync_queue+0x22/0x40 block/blk-core.c:222 nvme_sync_queues+0x100/0x150 drivers/nvme/host/core.c:5362 nvme_reset_work+0x138/0x930 drivers/nvme/host/pci.c:3264 Allocated by task 34: __blk_mq_alloc_disk+0x33/0x100 block/blk-mq.c:4462 nvme_alloc_ns+0x290/0x3870 drivers/nvme/host/core.c:4146 Freed by task 0: blk_free_queue_rcu+0x3a/0x50 block/blk-core.c:254 rcu_core+0xc10/0x1730 kernel/rcu/tree.c:2857 The queue being synced there is ctrl->admin_q, only a victim sharing a timer wheel bucket with the freed queue's dangling entry; other runs tripped in enqueue_timer(), __run_timers() or blk_mq_timeout_work(). Failing nvme_alloc_ns() with a debug patch makes it deterministic: one leaked timer trips KASAN within seconds, while 1987 patched releases produced no splat. Stop the timer and the queue work items before blk_mq_exit_queue(), like blk_mq_destroy_queue() does. Found by FuzzNvme. | ||||
| CVE-2026-80588 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: reclaim forward-allocated memory on RX path errors After commit 9db5b3cec4ec ("mptcp: borrow forward memory from subflow"), errors in the receive path prior to queueing skbs into the receive queue do not trigger forward-allocated memory reclaiming. Prevent forward memory from growing unboundedly in pathological drop scenarios by explicitly reclaiming memory when skbs are dropped. | ||||
| CVE-2026-80587 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: avoid combining some incoming suboptions Some MPTCP suboptions are mutually exclusive according to the RFC8684, but also because in different places, the code doesn't expect some combinations to be present. That's specially true for suboptions that would be present twice, but with different attributes. The new restrictions are the same as the ones applied on the output side, with mptcp_write_options. The same rules can be reused with a small fix: an MP_FASTCLOSE can be used with a DSS when the sender picks this option [1], which is not the case on Linux. Here are the rules: Which options can be used together? X: mutually exclusive O: often used together C: can be used together in some cases P: could be used together but we prefer not to (optimisations) | Opt: | MPC | MPJ | DSS | ADD | RM | PRIO | FAIL | FC | |------|------|------|------|------|------|------|------|------| | MPC |------|------|------|------|------|------|------|------| | MPJ | X |------|------|------|------|------|------|------| | DSS | X | X |------|------|------|------|------|------| | ADD | X | X | P |------|------|------|------|------| | RM | C | C | C | P |------|------|------|------| | PRIO | X | C | C | C | C |------|------|------| | FAIL | X | X | C | X | X | X |------|------| | FC | X | X | P | X | X | X | X |------| | RST | X | X | X | X | X | X | O | O | |------|------|------|------|------|------|------|------|------| The only difference is with the 'P': another stack could send and ADD_ADDR with other suboptions (DSS, RM_ADDR), and this should be allowed. A few points of attention: - In theory, an MP_CAPABLE could be used with a RM_ADDR, but there is no reason to add it with a SYN. Note that even with a 4th ACK, it doesn't seem to be useful, except when IDs are known in advance via another channel. Better not to break that. - Now, combining both an MP_CAPABLE and an MP_JOIN will no longer result to a reject of the two options, but only the second suboption is ignored. That seems OK to do that for this unexpected error. At least now all inconsistent combinations are handled the same way. This could change later in next. This also means the explicit checks for having both MPC + MPJ in subflow.c will now be unreachable. That's fine, they will be removed in a follow-up patch. - In case of conflicting combinations, the extra suboption(s) is/are ignored: having such combinations either means the remote peer is buggy, or is evil. The simplest action is then taken in this case: stop processing the current suboption. - In mp_opt->suboptions, there is also a bit reserved to the checksum, which can be used in an MP_CAPABLE and a DSS. Each time a DSS option can be used in parallel with another option, the checksum can be set, so the verification is combined into a new OPTIONS_MPTCP_DSS macro. - An MP_CAPABLE ACK can carry a Data-Level Length, and an optional Checksum: they are the same as the ones found in a DSS, because a DSS cannot be used in parallel to an MP_CAPABLE. Similarly, even if there is room, a DSS cannot be used with an MP_JOIN. | ||||
| CVE-2026-80586 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: options: reset DSS fields in case of unexpected size A remote peer could send a malformed DSS with a wrong size, followed by another DSS or MPC + Data. In this case, the first suboption will be ignored, but leaving some fields written, which could lead to inconsistency or access uninitialized data. Explicitly reset the fields that could have been modified in case of unexpected size. | ||||
| CVE-2026-80585 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fastopen: only mark MPTFO subflows with SYN data Passive TCP Fast Open accepts a valid-cookie SYN even when it carries no data. In that case the child socket's receive queue is intentionally left empty. mptcp_fastopen_subflow_synack_set_params() set is_mptfo before checking for queued SYN data. That made data-less TFO SYNs hit a WARN and, if the warning was non-fatal, left stale MPTFO state behind. The stale flag could later trigger a state-confusion bug in check_fully_established(). Only mark the subflow as MPTFO after confirming that an SKB was queued. Return quietly when the receive queue is empty. Note that mptcp_subflow_context's is_mptfo field is now not just about subflows where the TFO was present, but about MPTFO subflow that consumed SYN data. Only having a valid cookie but not carrying data is not really "doing TFO". | ||||
| CVE-2026-80584 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/qeth: validate user buffer length in SNMP and ARP query ioctls qeth_snmp_command() and qeth_l3_arp_query() allocate a buffer sized by a user-supplied length (udata_len) without checking a lower bound, then set udata_offset to a fixed non-zero value and pass both to a reply callback. The callback bounds-checks the copy with if ((udata_len - udata_offset) < len) Both fields are u32, so a udata_len smaller than udata_offset makes the subtraction wrap and the check pass, and the following memcpy() writes past the allocation. A udata_len of 0 also yields ZERO_SIZE_PTR from kzalloc(), which the existing NULL check does not catch. Reject buffers smaller than udata_offset before allocating, so the callback subtraction can no longer underflow. | ||||
| CVE-2026-80580 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: bound mode sysfs output to the sysfs buffer mode_string() uses snprintf() which can return a value larger than the remaining buffer space. show_modes() accumulates the return value into i without checking whether i has reached PAGE_SIZE, causing the offset to advance past the sysfs buffer if the modelist is long enough. Add a size parameter to mode_string() and use scnprintf() to return only the bytes actually written. Add an early return when offset already exceeds the buffer. In show_modes(), stop accumulating once the buffer is full. | ||||
| CVE-2026-80579 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: clear fb_info->mode before deleting a videomode fb_set_var() can delete a mode from info->modelist when userspace passes FB_ACTIVATE_INV_MODE through FBIOPUT_VSCREENINFO. The code checks that the mode being deleted is not the current info->var and that fbcon is not using it, but it does not check fb_info->mode. fb_info->mode may still point into the modelist entry being deleted. If the entry is freed, later mode sysfs reads through show_mode() can dereference a stale pointer. Clear fb_info->mode before calling fb_delete_videomode() when it matches the mode being removed. | ||||
| CVE-2026-80578 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: core: Fix pointer desynchronization in fb_io_read() In fb_io_read(), if copy_to_user() performs a partial copy (e.g., due to a faulty user buffer), the loop adjusts the chunk size 'c' and updates the remaining 'count'. However, the hardware 'src' pointer has already been eagerly advanced by the original chunk size. If the loop is allowed to continue, the read will resume from an incorrect, over-advanced offset. Since the remaining 'count' was only decremented by the successful bytes, this desynchronization causes the next iterations to execute more hardware reads than originally bounded, eventually leading to out-of-bounds I/O reads. Fix this by breaking out of the loop immediately upon a partial copy_to_user(). A partial copy indicates a faulty user buffer, making subsequent read attempts futile. Breaking out ensures we return the number of successfully read bytes without risking out-of-bounds hardware accesses in subsequent mismatched iterations. | ||||
| CVE-2026-80576 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: reject oversized IBs with per-ring packet limits On GFX rings, amdgpu_cs_p2_ib() passed user-supplied ib_bytes through to ib->length_dw without a limit, while ring_emit_ib() encodes length into packet fields. Oversized values can corrupt adjacent control bits and destabilize command submission. Add a per-ring IB packet size limit helper and reject command submissions exceeding the corresponding dword limit before IB allocation. Use the documented 20-bit limit for GFX/compute/SDMA/VPE, and apply the MM fallback limit for other ring types. (cherry picked from commit 7f48fa2cf62e3fa6c9c3870aa74988f773247e52) | ||||
| CVE-2026-80574 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: focaltech - fix array out-of-bounds in focaltech_process_rel_packet Make finger2 (and also finger1) unsigned, so that if the finger index in the packet is 0 then subtracting 1 creates an array index which overflows above the existing check for FOC_MAX_FINGERS, as the existing comment says it should, instead of writing to state->fingers[-1]. | ||||
| CVE-2026-80572 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: byd - synchronize timer deletion before freeing private data byd_disconnect() uses timer_delete() before freeing the driver's private data. This does not wait for a running byd_clear_touch() callback, which dereferences the private data and its psmouse pointer. A callback racing with disconnect can therefore access the private data after it has been freed. The timer can also still be re-armed by byd_process_byte() while the disconnect is in progress. Use timer_shutdown_sync() before freeing the private data: it waits for a running callback and turns any later re-arm attempt into a no-op. | ||||
| CVE-2026-80561 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: libceph: fix multiple unsafe decodes in decode_locker() decode_locker() in cls_lock_client.c contains three unsafe decode operations that allow a malicious or compromised OSD to trigger slab-out-of-bounds reads: 1. ceph_decode_copy() at the locker_id_t name field has no preceding bounds check. With p == end after ceph_start_decoding() accepts struct_len=0, this reads sizeof(ceph_entity_name) = 9 bytes past the validated buffer boundary. 2. *p += sizeof(struct ceph_timespec) after the locker_info_t header is an unchecked pointer advance. A malicious OSD can position p past end, causing all subsequent _safe checks to pass against a bogus boundary. 3. len = ceph_decode_32(p) has no preceding bounds check, and the immediately following *p += len is uncapped. A malicious OSD can send len=0xffffffff, advancing p gigabytes past end and escaping the decode window entirely. Fix all three by replacing bare operations with their safe variants: ceph_decode_copy -> ceph_decode_copy_safe *p += sizeof(...) -> ceph_decode_skip_n ceph_decode_32(p) -> ceph_decode_32_safe *p += len -> ceph_decode_skip_n A new label is added to return -EINVAL on any bounds violation. -EINVAL is appropriate here: the data received from the OSD is structurally malformed, which is an invalid argument to the decode contract regardless of whether the caller or the wire is at fault. Attacker model: a malicious or compromised OSD in a multi-tenant Ceph deployment can trigger this against any kernel client that issues the lock.get_info class method (e.g. during RBD exclusive lock acquisition) without any further privileges beyond OSD session establishment. [ idryomov: use ceph_decode_skip_string() to skip description, trim changelog ] | ||||
| CVE-2026-80558 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: libceph: Avoid using invalid osd indices from primary_temp A corrupted osdmap received from a Ceph monitor or OSD may contain osd indices in its pg_temp, primary_temp, pg_upmap, and pg_upmap_items parts that don't exist, i.e., that are greater than max_osd or smaller than CEPH_HOMELESS_OSD (-1). These indices are used to create the up and acting set in ceph_pg_to_up_acting_osds(), called from calc_target(). While most of these osd indices are checked, the one from primary_temp is not. Subsequently, this may lead to calc_target() returning this (potentially invalid) index as target osd for a (linger) request. Because the osd_state, osd_weight, and osd_addr arrays only contain max_osd entries (with indices 0 to max_osd -1), this leads to out-of-bounds accesses when trying to read values from these arrays. This patch fixes the issue by adding a check to get_temp_osds(), so that only valid osd indices from primary_temp are used, and it falls back to using the primary from pg_temp or the up set if it is invalid. [ idryomov: changelog ] | ||||
| CVE-2026-80557 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: libceph: fix OOB read in decode_watchers() via missing bounds check ceph_start_decoding() validates that struct_len bytes remain in the buffer after the encoding header, but accepts struct_len=0 as valid: ceph_decode_need(p, end, 0, bad) always passes. When a malicious or compromised OSD sends an obj_list_watch_response_t reply with struct_len=0, ceph_start_decoding() returns success with p == end, leaving zero bytes guaranteed for subsequent reads. The immediately following ceph_decode_32(p) in decode_watchers() has no preceding bounds check. With p == end this is a 4-byte read past the validated buffer boundary. The garbage value is then passed directly to kzalloc_objs() as the watcher count. The sibling function decode_watcher() already uses the safe variants (ceph_decode_copy_safe, ceph_decode_64_safe, ceph_decode_skip_32) after its own ceph_start_decoding() call. decode_watchers() is the only site that uses the bare variant, confirming an oversight. Fix by replacing ceph_decode_32(p) with ceph_decode_32_safe(p, end, *num_watchers, bad), consistent with the established pattern. Attacker model: a malicious or compromised OSD in a multi-tenant Ceph deployment (e.g. cloud) can trigger this against any kernel client that calls CEPH_OSD_OP_LIST_WATCHERS, without any further privileges beyond OSD session establishment. [ idryomov: trim changelog ] | ||||