Export limit exceeded: 405561 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (405561 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-109946 | 1 Freerdp | 1 Freerdp | 2026-10-13 | 6.5 Medium |
| FreeRDP 3.11.0 before 3.32.0 does not validate that AVC444 and AVC444v2 region widths are even before YUV444 conversion, so an odd width reaches an assertion and aborts the client. A malicious or compromised RDP server can terminate a connected FreeRDP client after RDPGFX AVC444 negotiation by sending an in-bounds region rectangle with an odd width. | ||||
| CVE-2026-109944 | 1 Freerdp | 1 Freerdp | 2026-10-13 | 6.5 Medium |
| FreeRDP 3.0.0 before 3.32.0 does not remove card handles when Emulate_SCardReleaseContext releases a smartcard-emulation context, so Emulate_SCardTransmit later looks up the deleted parent context and reaches a terminating WINPR_ASSERT. A malicious RDP server can crash a connecting client with smartcard emulation and redirection enabled by releasing a context, establishing another, and issuing SCardTransmit with the stale card handle. | ||||
| CVE-2026-109943 | 1 Freerdp | 1 Freerdp | 2026-10-13 | 6.5 Medium |
| FreeRDP 3.29.0 before 3.32.0 contains a double free in the client's async-update message proxy, which shallow-copies the parser-owned PolygonSC or PolygonCB points array when numPoints is zero, so both the queue consumer and parser cleanup free it. A malicious RDP server can send a point-bearing polygon order followed by a zero-point order to crash a client with +async-update enabled. | ||||
| CVE-2026-109942 | 1 Freerdp | 1 Freerdp | 2026-10-13 | 6.5 Medium |
| FreeRDP 2.3.0 before 3.32.0 dereferences a NULL stream in rdg_process_close_packet in libfreerdp/core/gateway/rdg.c because rdg_process_control_packet accepts a header-only PKT_TYPE_CLOSE_CHANNEL packet and passes the null payload without a check. A malicious or compromised RD Gateway can send an eight-byte CLOSE_CHANNEL header to crash a connecting FreeRDP client. | ||||
| CVE-2026-109941 | 1 Freerdp | 1 Freerdp | 2026-10-13 | 6.5 Medium |
| FreeRDP from 2.3.0 before 3.32.0 contains an infinite loop vulnerability in http_chuncked_read that allows malicious RD Gateways to hang clients by sending incomplete chunked responses. Attackers can send a partial chunk-size line or footer followed by a clean TLS shutdown, causing zero-byte reads to loop forever and freeze the client decoder thread. | ||||
| CVE-2026-109939 | 1 Freerdp | 1 Freerdp | 2026-10-13 | 6.5 Medium |
| FreeRDP 3.27.1 before 3.32.0 contains a NULL pointer dereference in update_read_cache_bitmap_v3_order() in libfreerdp/core/orders.c, which accesses the client bitmap cache when the CBR3_DO_NOT_CACHE flag is set, even though the cache is not yet initialized before Demand Active. A malicious or compromised RDP server can send a Cache Bitmap V3 order during connection setup to crash a connecting client that has enabled the non-default Bitmap Cache V3 feature (/cache:codec:<rfx|nsc|jpeg>). | ||||
| CVE-2026-109938 | 1 Freerdp | 1 Freerdp | 2026-10-13 | 6.5 Medium |
| Positive mapped-video coordinates overflow and abort FreeRDP clients A malicious or compromised RDP server can terminate a FreeRDP client after the user connects with video redirection enabled. | ||||
| CVE-2026-109680 | 1 Freerdp | 1 Freerdp | 2026-10-13 | 5.3 Medium |
| FreeRDP 3.18.0 before 3.32.0 has a heap-based out-of-bounds write in freerdp_interruptible_get_line, which shrinks the buffer to 32 bytes while keeping a pre-filled suggested username's length as its write offset. A malicious or compromised ARM routing service can return a long redirectedUsername that reaches the CLI credential prompt, crashing the client when the user types input. | ||||
| CVE-2026-109679 | 1 Freerdp | 1 Freerdp | 2026-10-13 | 5.3 Medium |
| FreeRDP 3.0.0-beta4 before 3.32.0 contains a NULL pointer dereference in arm_handle_request_ok when an ARM endpoint returns an empty HTTP 200 body. Attackers controlling the configured ARM gateway can return a zero-length body to pass NULL to strnlen and crash the connecting client. | ||||
| CVE-2026-109677 | 1 Freerdp | 1 Freerdp | 2026-10-13 | 6.5 Medium |
| FreeRDP from 2.0.0-beta1 before 3.28.0 contains an out-of-bounds read vulnerability in smartcard_LocateCardsByATRA_Call because the ATR pattern cbAtr byte count is not capped. Malicious RDP servers can send crafted ATR mask arrays to use query timing as an oracle, leaking heap memory bit-by-bit to defeat ASLR and aid RCE exploits. | ||||
| CVE-2026-109676 | 1 Freerdp | 1 Freerdp | 2026-10-13 | 8.8 High |
| FreeRDP from 3.0.0-beta1 before 3.32.0 contains a use-after-free vulnerability in smartcard handling that allows attackers to access a freed smartcard handle object after an invalid connect operation. Attackers can trigger an invalid smartcard connect operation to cause reuse of the freed handle, leading to memory corruption or crashes. | ||||
| CVE-2026-94410 | 1 Bender | 1 Customer Platform Software | 2026-10-13 | 4.3 Medium |
| A low privileged remote attacker is able to view a list of roles that should only be accessible to administrators. This results in a low level of confidentiality breach, as no particularly sensitive information is affected. | ||||
| CVE-2026-93275 | 1 Linux | 1 Linux Kernel | 2026-10-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/pt: Fix stop/start with no update If pt_event_stop() is called without PERF_EF_UPDATE flag, then perf_aux_output_end() is not called. A subsequent call to pt_event_start() will call perf_aux_output_begin() again which violates the rule against nesting and triggers a WARNING in perf_aux_output_begin(). Originally, pt_event_stop() was never called without PERF_EF_UPDATE, because the only code paths to do so are from event overflow, and Intel PT does not do that. However the introduction of group throttling by commit 9734e25fbf5ae ("perf: Fix the throttle logic for a group") meant that an Intel PT event could be throttled if it was part of a group. Throttling calls PMU ->stop() / ->start() callbacks without flags. An example is when AUX area sampling is used. The following commands hit the issue: echo 10000 > /proc/sys/kernel/perf_event_max_sample_rate perf record -F32000 --aux-sample -e '{intel_pt//u,cycles:u}' \ -- bash -c 'for i in `seq 1 100000` ; do true ; done' Use PERF_HES_UPTODATE to track whether perf_aux_output_begin() and perf_aux_output_end() are balanced. A cleared PERF_HES_UPTODATE bit indicates that an AUX output context is still open. Amend pt_event_start() / pt_event_stop() accordingly so that begin/end stay balanced: - In non-snapshot mode, stop() always closes the buffer (the buffer may have run out of space, and that accounting is done by the update), so a following start() opens a fresh one as before. - In snapshot/overwrite mode, stop() without PERF_EF_UPDATE leaves the buffer open so that pt_event_snapshot_aux() can still copy from it, and start() then only re-enables tracing instead of calling perf_aux_output_begin() again. Note that pt_event_del() calls pt_event_stop() with PERF_EF_UPDATE flag set (as is required by the documentation), so a final call to perf_aux_output_end() is assured. | ||||
| CVE-2026-89203 | 1 Siemens | 1 Ruggedcom Crossbow | 2026-10-13 | 4.3 Medium |
| A vulnerability has been identified in RUGGEDCOM CROSSBOW (All versions < V6.0). Affected devices do not properly restrict access to various database queries, allowing users to retrieve system-wide information that is not intended for their privilege level. This could allow an authenticated attacker to gather sensitive information about the system's infrastructure, including details on all devices, substations, users, and scheduled activities. | ||||
| CVE-2026-89198 | 1 Siemens | 1 Ruggedcom Crossbow | 2026-10-13 | 8.8 High |
| A vulnerability has been identified in RUGGEDCOM CROSSBOW (All versions < V6.0). Affected devices do not properly validate or sanitize the filename of firmware files uploaded to the system. This could allow an authenticated attacker with specific privileges to execute arbitrary SQL commands on the underlying database. | ||||
| CVE-2026-78557 | 2026-10-13 | 8.3 High | ||
| A vulnerability has been identified in Industrial Edge App Publisher (All versions < V1.27.9). The application fails to properly sanitize or escape data received from the backend before rendering it in the user interface. Because the front end is integrated with Node.js, this vulnerability allows for the execution of arbitrary JavaScript, which can be leveraged to achieve remote code execution (RCE) on the victim's machine | ||||
| CVE-2026-63355 | 2026-10-13 | 6.1 Medium | ||
| Affected devices do not properly sanitize signal names contained in imported CSV trace files before rendering them in selection menus on the Trace page. This could allow an attacker to social engineer an authorized user who holds the function right “Read diagnostics” into importing a specially crafted trace file. Attacker-controlled JavaScript could be executed in the user’s browser session when the user subsequently interacts with an affected selection menu. | ||||
| CVE-2026-63350 | 2026-10-13 | 9.6 Critical | ||
| Affected devices do not properly restrict executable content contained in imported trace files. This could allow an attacker to social engineer an authorized user who holds the function right “Read diagnostics” into importing a specially crafted trace file. Successful exploitation could allow attacker-controlled JavaScript to execute in the user’s browser session and perform PLC operations through the web server within the scope of the user’s authorization. | ||||
| CVE-2026-63316 | 2026-10-13 | N/A | ||
| A SQL injection vulnerability has been identified in Payload CMS. Improper neutralization of input provided by user into "in" and "not_in" query paramethers allows an authenticated attacker to perform SQL Injection attacks. This issue was fixed in version 3.90.0 and 4.0.0-canary.34. | ||||
| CVE-2026-54870 | 2026-10-13 | 6.5 Medium | ||
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in wpweaver Weaver Xtreme Theme Support weaverx-theme-support allows Stored XSS.This issue affects Weaver Xtreme Theme Support: from n/a through 7.0.1. | ||||