Export limit exceeded: 25261 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25261 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98341 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: don't free driver-owned scan requests When an interface goes down while a scan is running, cfg80211 completes the scan towards userspace and frees the scan request. However, the driver can be convinced that it owns the request, since the cancellation is (intended to be) asynchronous. The WARN_ON() in the netdev notifier was meant to catch this, but it's not actually avoidable, so it triggers and we get a UAF in scan_done(). There doesn't seem to be a great way around it, so just track that the driver is still convinced it owns the request, and then just free it on completion if it was already cancelled. Also remove the warnings since they can trigger in the intended architecture. | ||||
| CVE-2026-98286 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drop_monitor: use timer_shutdown_sync() to prevent timer rearming during teardown In drop_monitor teardown paths (net_dm_trace_off_set(), net_dm_hw_monitor_stop(), and error unwind paths in net_dm_trace_on_set() and net_dm_hw_monitor_start()), per-CPU timers are stopped using timer_delete_sync() followed by cancel_work_sync(). However, there is a circular dependency between send_timer and dm_alert_work: 1) sched_send_work() (timer callback) schedules dm_alert_work. 2) send_dm_alert() / net_dm_hw_summary_work() calls reset_per_cpu_data() or net_dm_hw_reset_per_cpu_data(). 3) If memory allocation fails under memory pressure in the reset function, it re-arms the timer via mod_timer(&data->send_timer, ...). If dm_alert_work is running concurrently while timer_delete_sync() executes on another CPU, an allocation failure in the worker will re-arm the timer after timer_delete_sync() has already returned. Once cancel_work_sync() completes and module_put() is called, the timer remains active in the timer wheel. If the module is then unloaded, the timer will fire and execute sched_send_work() in freed memory, triggering a kernel panic / use-after-free. Switch from timer_delete_sync() to timer_shutdown_sync(). This guarantees that any in-flight timer handler has finished and prevents subsequent re-arming attempts from running workers from succeeding. When monitoring is restarted later, timer_setup() is invoked, which cleanly re-initializes the timer. | ||||
| CVE-2026-98288 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix TSO header length truncation stmmac_tso_xmit() stores the protocol header length returned by stmmac_tso_header_size() in a u8. stmmac_tso_valid_packet() admits headers up to 1023 bytes, so a header longer than 255 bytes wraps modulo 256 (486 becomes 230, 256 becomes 0). A TCP over IPv6 socket carrying a few hundred bytes of sticky destination/hop-by-hop options makes skb_tcp_all_headers() exceed 255 while staying below the 1023-byte limit, so such an skb reaches stmmac_tso_xmit(). Widen proto_hdr_len to unsigned int, which is sufficient since the value is bounded by the hardware limit, and adjust the debug print specifier accordingly. | ||||
| CVE-2026-98322 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_nat: fully initialise new_addr in netmap setup nft_nat_setup_netmap() builds the mapped address in an on-stack union nf_inet_addr. For an IPv4 mapping it writes only the 4-byte .ip member and the loop runs a single 32-bit iteration, but it then copies the whole 16-byte union into range->min_addr and range->max_addr, so the upper 12 bytes reach nf_nat_setup_info() uninitialised. KMSAN reports an uninit-value in nf_nat_setup_info() reached from nft_nat_eval(). The IPv6 path fills all 16 bytes and is not affected. Zero-initialise new_addr. | ||||
| CVE-2026-98350 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: cyw: pass PMKID to firmware if present Zero out auth_status on initialization. Otherwise, garbage will leak from the stack to the firmware (when ssid is less than 32 bytes and/or when params->pmkid is set). Then, pass the params->pmkid to the firmware (without it, the firmware caches a garbage PMKID on successful authentication and denies a subsequent association request that includes the PMKID). | ||||
| CVE-2026-98381 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: veth: manage XDP program pointers during channel resize veth_set_channels() tears down XDP resources for removed RX queues without clearing rq->xdp_prog. If the program is then detached or replaced, those queues keep the old pointer after bpf_prog_put(). A later channel increase can re-enable NAPI and run the freed program. BUG: unable to handle page fault for address: ffffc90000256048 Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: veth_xdp_rcv_skb (include/linux/filter.h:779 include/net/xdp.h:696 drivers/net/veth.c:820) Call Trace: veth_xdp_rcv (drivers/net/veth.c:941) veth_poll (drivers/net/veth.c:986) __napi_poll (net/core/dev.c:7787) net_rx_action (net/core/dev.c:7850 net/core/dev.c:8007) handle_softirqs (kernel/softirq.c:645) Kernel panic - not syncing: Fatal exception in interrupt | ||||
| CVE-2026-98382 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject dev-bound-only programs on other devices __bpf_offload_dev_match() falls back to comparing offdev pointers after an exact netdev mismatch. Bound-only programs normally have NULL offdevs, so unrelated netdevs compare equal. A bound-only program on an offload-registered netdev can instead inherit a real offdev and match a sibling port. With CAP_BPF and CAP_NET_ADMIN, a caller can use bpf(BPF_LINK_CREATE) with a different target ifindex to run metadata kfuncs specialized for the bound driver on the target driver's xdp_buff. Running a veth-bound program on tun reads beyond tun's bare stack xdp_buff as a veth_xdp_buff. Oops: general protection fault, probably for non-canonical address KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:veth_xdp_rx_timestamp (drivers/net/veth.c:1673) Call Trace: ... tun_build_skb (drivers/net/tun.c:1739) tun_get_user (drivers/net/tun.c:1856) tun_chr_write_iter (drivers/net/tun.c:2091) vfs_write (fs/read_write.c:595 fs/read_write.c:687) ksys_write (fs/read_write.c:739) do_syscall_64 (arch/x86/entry/syscall_64.c:84) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Kernel panic - not syncing: Fatal exception in interrupt Restrict non-offloaded programs to exact netdev matches and retain the shared-offdev fallback only for genuinely offloaded multi-port programs. | ||||
| CVE-2026-98264 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: virtio: reset device before deleting virtqueues virtsnd_remove() and virtsnd_freeze() delete the virtqueues before resetting the device. del_vqs() frees the vring backing, but does not provide a generic device quiesce operation. In particular, modern virtio-pci keeps enabled queues active until the device is reset. Reset the device before deleting the virtqueues so it can no longer access the vring memory when that memory is released. This also covers probe failures after DRIVER_OK, which unwind through virtsnd_remove(). | ||||
| CVE-2026-98383 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Disallow bpf_skb_pull_data() for LWT_SEG6LOCAL An LWT_SEG6LOCAL program can invalidate its cached SRH with bpf_lwt_seg6_adjust_srh() and then call bpf_skb_pull_data(). The latter may reallocate skb->head, leaving the per-CPU SRH pointer dangling. Post-program SRH validation then writes through that pointer. Disallow bpf_skb_pull_data() for LWT_SEG6LOCAL programs so the verifier rejects this unsafe helper combination. Other LWT program types continue to expose the helper through lwt_out_func_proto(). | ||||
| CVE-2026-98384 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix out-of-bounds read of sk_protocol in bpf_sock_destroy() sk_protocol lives in struct sock, not in struct sock_common. A timewait or request sock handed to bpf_sock_destroy() by the tcp iterator is neither, so reading sk->sk_protocol runs past the object: ================================================================== BUG: KASAN: slab-out-of-bounds in bpf_sock_destroy+0xc7/0xe0 Read of size 2 at addr ffff8881047d11b4 by task test_progs/428 Tainted: [W]=WARN Call Trace: <TASK> dump_stack_lvl+0x91/0xf0 print_report+0xd1/0x630 kasan_report+0xf3/0x130 __asan_report_load2_noabort+0x14/0x30 bpf_sock_destroy+0xc7/0xe0 bpf_prog_c3dd61f9d9cd9f37_iter_tcp6_timewait+0x9f/0xb7 bpf_iter_run_prog+0x538/0xde0 bpf_iter_tcp_seq_show+0x26b/0x4b0 bpf_seq_read+0x424/0x1210 vfs_read+0x197/0xe40 ksys_read+0x119/0x240 __x64_sys_read+0x72/0xc0 x64_sys_call+0x647/0x27e0 do_syscall_64+0xe5/0x610 entry_SYSCALL_64_after_hwframe+0x76/0x7e Only check sk_protocol on full socks. tcp_abort() already knows how to deal with TIME_WAIT and NEW_SYN_RECV socks. Also fix the comment, it never matched the code. | ||||
| CVE-2026-98291 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: fix off-by-one bounds check in RX submit btintel_pcie_submit_rx() used frbd_index > rxq->count to guard the FRBD array access, allowing frbd_index == rxq->count to pass through and index one element past the end of the array. Change the check to >= rxq->count so every out-of-range index is rejected. This issue was reported by Claude Mythos. | ||||
| CVE-2026-98325 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: set up the TX info early to fix failure paths The previous commit 2c51457d930f ("wifi: mac80211: free ack status frame on TX header build failure") cleaned up the leak, but still left the code a bit messy and the failed SKB didn't get reported to userspace. Fix this up by initialising skb->cb[] earlier, which allows using ieee80211_free_txskb() and therefore reports it for the failure in ieee80211_build_hdr(), and unifies the ieee80211_skb_resize() failure path with it. | ||||
| CVE-2026-98330 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: get the wiphy out of a dying network namespace When a network namespace is destroyed, cfg80211_pernet_exit() moves any wiphy back to the initial namespace, and just warns if that fails. But moving an interface can fail (due to allocation failures), and then the wiphy is left behind with a garbage netns pointer: Kernel mode fault at addr 0x30 genlmsg_multicast_netns.constprop.0+0x46/0xcf [cfg80211] nl80211_notify_wiphy+0xcd/0xe8 [cfg80211] wiphy_unregister+0x169/0x3fc [cfg80211] Note that commit debac3a20dec ("net: Remove conflicting altnames for dying netns in __dev_change_net_namespace().") fixed another path that could reach it without allocation failures. Remove interfaces that cannot be moved instead of failing the switch, so that the wiphy always ends up in the initial namespace. In this case the netdev core will unregister the interfaces anyway. | ||||
| CVE-2026-98331 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: unlist vifs when their netdev is unregistered mac80211 only removes vifs from the local->interfaces list when an interface is removed via ieee80211_if_remove(), before it unregisters the netdev. However, it's possible for a netdev to be unregistered without going through that: When the netns that holds the wiphy is destroyed, the wiphy is supposed to move to the init_ns, but that can run into allocation failures. Then, mac80211 has an interface listed that doesn't exist, and will eventually hit BUG: failure at net/wireless/core.h:141/wiphy_to_rdev()! ... _cfg80211_unregister_wdev+0x24/0x36a [cfg80211] cfg80211_unregister_wdev+0x15/0x1d [cfg80211] ieee80211_remove_interfaces+0x1ff/0x257 [mac80211] ieee80211_unregister_hw+0x73/0x1d1 [mac80211] mac80211_hwsim_del_radio+0x114/0x166 [mac80211_hwsim] Remove the interface from the list in ->ndo_uninit if it's still around to avoid this. | ||||
| CVE-2026-98337 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't start a ROC while scanning The ROC work can be pending when a scan starts (which requires ROC list to be empty, but that's possible), and then a new ROC can be added to the list and the work will pick it up. Avoid starting that ROC if a scan made it between things, as otherwise we'll hit a warning later: WARNING: net/mac80211/offchannel.c:404 at ieee80211_start_next_roc+0x256/0x2d0 Workqueue: events_unbound cfg80211_wiphy_work Call Trace: __ieee80211_scan_completed+0x4fd/0xe40 net/mac80211/scan.c:537 ieee80211_scan_work+0x472/0x1ff0 net/mac80211/scan.c:1193 cfg80211_wiphy_work+0x410/0x570 net/wireless/core.c:513 | ||||
| CVE-2026-98255 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tcp: exclude old ACKs from tcp fast path Exclude old ACKs before SND.UNA from the tcp fast path as well as ACKs after SND.NXT. Such ACKs will fall through to the slow path, where tcp_ack() performs the appropriate validation and challenge ACK handling according to RFC5961 and Commit 3d501dd326fb1c7 ("tcp: do not accept ACK of bytes we never sent"). This prevents old ACKs from being accepted or modifying connection state as part of the fast path before appropriate ACK validation is applied. In particular, this prevents payload carried by a segment with an excessively old ACK from advancing RCV.NXT before the ACK is rejected. | ||||
| CVE-2026-98263 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: rt712-sdca-dmic: fix uninitialized stream_config->type stream_config is not initialized before being passed to sdw_stream_add_slave(). The type field may contain garbage and is later copied to stream->type by sdw_config_stream(). Zero-initialize stream_config so type defaults to SDW_STREAM_PCM. While at it, use snd_sdw_params_to_config() helper instead of open-coding the same logic. | ||||
| CVE-2026-98265 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Clamp implicit feedback packet count to URB capacity data_ep_set_params() allocates each data URB for exactly u->packets isochronous frames, so urb->iso_frame_desc[] has u->packets slots and ctx->packets is the driver's only record of that limit. For an implicit feedback sink, snd_usb_queue_pending_output_urbs() overwrites it with the sync source's packet count, which is calculated independently from the capture endpoint's parameters. When that count is larger, prepare_playback_urb() and prepare_silent_urb() can write iso_frame_desc[] past the allocation; their existing bounds limit payload bytes, not the descriptor index. The reproducer uses a high-speed UAC2 device declaring bInterval 1 for implicit feedback capture (8 packets) and bInterval 4 for playback (1 packet). On the first capture completion after the stream starts, it accesses seven descriptors spanning 112 bytes beyond the one-packet URB: BUG: KASAN: slab-out-of-bounds in prepare_playback_urb (sound/usb/pcm.c:1560) Write of size 4 at addr ffff88801e696ad0 by task vhci_rx/178 prepare_playback_urb (sound/usb/pcm.c:1560) prepare_outbound_urb (sound/usb/endpoint.c:340) snd_usb_queue_pending_output_urbs (sound/usb/endpoint.c:501) snd_complete_urb (sound/usb/endpoint.c:1834) __usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657) usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1741) vhci_rx_loop (drivers/usb/usbip/vhci_rx.c:107) kthread (kernel/kthread.c:436) The buggy address belongs to the object at ffff88801e696a00 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 0 bytes to the right of allocated 208-byte region [ffff88801e696a00, ffff88801e696ad0) Record the allocated packet count per endpoint and clamp both the adopted count and the packet-size copy to it. Fold the Format Type II delimiter into urb_packs before the allocation loop so the recorded limit matches every URB. | ||||
| CVE-2026-98266 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: core: Fix potential UAF after asynchronous card release Usually a sound driver releases the resources assigned to the card via snd_card_free(), and it synchronizes with the whole release procedure. However, when the card is released asynchronously via snd_card_free_when_closed() like USB-audio driver, the situation is slightly different; although the snd_card_disconnect() call at the disconnection guarantees that any newer accesses will be gated, the in-flight tasks might be still accessing to the underlying card->dev device even after the disconnection, which would cause a use-after-free in the end, as reported by fuzzers. For addressing the bug above, this patch takes the refcount of card->dev at initialization of the card object, and releases at its destructor. This assures the availability of the card->dev in its whole lifecycle. | ||||
| CVE-2026-98338 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: ibss: ref BSS entry for joined event When the IBSS is joined, we only record the BSSID/channel in the event and look up the BSS entry when processing it. However, that's racy, e.g. a new scan with NL80211_SCAN_FLAG_FLUSH can remove it, causing a warning in the event work: !bss WARNING: net/wireless/ibss.c:37 at __cfg80211_ibss_joined+0x3d3/0x440 Workqueue: cfg80211 cfg80211_event_work cfg80211_process_wdev_events+0x39f/0x5b0 net/wireless/util.c:1144 cfg80211_process_rdev_events+0xa1/0x110 net/wireless/util.c:1179 cfg80211_event_work+0x2f/0x40 net/wireless/core.c:393 Do the lookup early (the driver is expected to only join an IBSS that has a BSS entry) and keep a reference to it. | ||||