Export limit exceeded: 93544 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (93544 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53196 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 6.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: io_ti: fix heap overflow in get_manuf_info() get_manuf_info() reads le16_to_cpu(rom_desc->Size) bytes from the device I2C EEPROM into a buffer allocated with kmalloc_obj(), which is sizeof(struct edge_ti_manuf_descriptor) = 10 bytes. The Size field comes from the device and is only validated (in check_i2c_image()) to make sure the descriptor fits within TI_MAX_I2C_SIZE (16384 bytes), not against the destination buffer size. A malicious USB device can therefore set Size to any value up to 16377, causing a heap overflow of up to 16367 bytes when plugged into a host running this driver. valid_csum() is called after read_rom() and also iterates buffer[0..Size-1], compounding the out-of-bounds access. Fix by rejecting descriptors with unexpected length before calling read_rom(). [ johan: amend commit message; also check for short descriptors ] | ||||
| CVE-2026-50011 | 1 Netty | 1 Netty | 2026-09-18 | 7.5 High |
| Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, RedisArrayAggregator pre-allocates ArrayList with initial capacity equal to the RESP array element count declared in an array header. That count is taken from the wire before the corresponding child messages exist. A small malicious header can claim a huge initial capacity. Versions 4.1.135.Final and 4.2.15.Final patch the issue. | ||||
| CVE-2026-48043 | 1 Netty | 1 Netty | 2026-09-18 | 5.3 Medium |
| Netty is a network application framework for development of protocol servers and clients. In netty-codec-http2 prior to versions 4.1.135.Final and 4.2.15.Final, the `DelegatingDecompressorFrameListener` class orchestrates HTTP/2 decompression by embedding a per-stream `EmbeddedChannel` that runs the appropriate decompression codec (gzip, deflate, zstd) and forwards decompressed chunks to a wrapped listener. Each decompressed chunk is a pooled `ByteBuf` handed to an anonymous `ChannelInboundHandlerAdapter` tail handler, which becomes the sole owner responsible for releasing it. A remote peer could send frames that would result in the flow-controller throwing and so trigger a resource leak which at the end might take down the whole JVM due OOME. Versions 4.1.135.Final and 4.2.15.Final patch the issue. | ||||
| CVE-2026-48006 | 1 Netty | 1 Netty | 2026-09-18 | 7.5 High |
| Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, the RedisArrayAggregator handler permanently leaks pooled direct-memory buffers when a Redis pipeline connection closes before a RESP array aggregate completes. The handler retains child messages in per-handler state (`depths` field) but defines no `channelInactive`, `handlerRemoved`, or `exceptionCaught` method to release them when the pipeline tears down. Because the leaked buffers are slices of `PooledByteBufAllocator` chunks, they prevent those chunks from being returned to the JVM-wide direct-memory pool. Repeated connection churn by any network peer monotonically drains this shared pool, eventually causing allocation failures on all Netty channels in the process. Versions 4.1.135.Final and 4.2.15.Final patch the issue. | ||||
| CVE-2026-47162 | 1 Vim | 1 Vim | 2026-09-18 | 8.8 High |
| Vim is an open source, command line text editor. Prior to version 9.2.0495, a Vimscript code injection vulnerability exists in s:NetrwBookHistSave() in the netrw plugin (runtime/pack/dist/opt/netrw/autoload/netrw.vim) when serializing browsed directory paths to the history file ~/.vim/.netrwhist. A directory name derived from the filesystem is interpolated into a single-quoted Vimscript string literal without escaping embedded single quotes, allowing a crafted directory name to break out of the string context and execute arbitrary Vimscript, including shell commands via system() and :!, the next time the history file is sourced. This issue has been patched in version 9.2.0495. | ||||
| CVE-2026-46340 | 1 Netty | 1 Netty | 2026-09-18 | 7.5 High |
| Netty is a network application framework for development of protocol servers and clients. In versions of netty-transport-sctp prior to 4.1.135.Final and 4.2.15.Final, for each non-complete SctpMessage fragment the handler does `fragments.put(streamId, Unpooled.wrappedBuffer(frag, byteBuf))`, wrapping the previous accumulator and the new slice into a *new* CompositeByteBuf every time. After N fragments the accumulator is an N-deep chain of composites, each holding references and component arrays; readableBytes()/getBytes() on the final buffer recurse N levels. There is no limit on N, on total bytes, or on the number of streamIdentifiers an attacker can open (each gets its own map entry). A peer that never sets the `complete` flag can grow this structure indefinitely from tiny 1-byte DATA chunks. Versions 4.1.135.Final and 4.2.15.Final patch the issue. | ||||
| CVE-2026-45416 | 1 Netty | 1 Netty | 2026-09-18 | 7.5 High |
| Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, SslClientHelloHandler.decode() reads the 24-bit TLS handshake length and, when the ClientHello does not fit in the first record, eagerly allocates `ctx.alloc().buffer(handshakeLength)` (line 161). The guard at line 140 is `handshakeLength > maxClientHelloLength && maxClientHelloLength != 0`, and the commonly-used SniHandler/AbstractSniHandler constructors (SniHandler(Mapping), SniHandler(AsyncMapping), AbstractSniHandler()) pass maxClientHelloLength=0 and handshakeTimeoutMillis=0, so the length guard is disabled and no timeout is scheduled. A 16 MiB request exceeds the default pooled chunk size and becomes a huge/unpooled allocation performed immediately. The buffer is retained in the handler until the channel closes. Versions 4.1.135.Final and 4.2.15.Final patch the issue. | ||||
| CVE-2026-44893 | 1 Netty | 1 Netty | 2026-09-18 | 7.5 High |
| Netty is a network application framework for development of protocol servers and clients. In netty-codec-haproxy prior to versions 4.1.135.Final and 4.2.15.Final, when decoding a PP2_TYPE_SSL TLV, HAProxyMessage.readNextTLV() first calls `header.retainedSlice(header.readerIndex(), length)` and only then reads the 1-byte client field and 4-byte verify field. If the attacker sets the TLV length below 5, the subsequent readByte/readInt throws IndexOutOfBoundsException. HAProxyMessageDecoder only catches HAProxyProtocolException around this call, so the IOOBE propagates and the retained slice on the pooled cumulation buffer is never released. Versions 4.1.135.Final and 4.2.15.Final patch the issue. | ||||
| CVE-2026-44890 | 1 Netty | 1 Netty | 2026-09-18 | 7.5 High |
| Netty is a network application framework for development of protocol servers and clients. In netty-codec-redis prior to versions 4.1.135.Final and 4.2.15.Final, an attacker can cause DoS by sending crafted Redis payloads across multiple connections without `\r\n`. This exhausts the server's direct memory pool (OutOfDirectMemoryError), preventing legitimate connections from being processed. Versions 4.1.135.Final and 4.2.15.Final patch the issue. | ||||
| CVE-2026-44250 | 1 Netty | 1 Netty | 2026-09-18 | 7.5 High |
| Netty is a network application framework for development of protocol servers and clients. In netty-codec-redis prior to versions 4.1.135.Final and 4.2.15.Final, an attacker can cause DoS by sending a crafted Redis payload with deeply nested arrays. This forces the server to allocate a massive number of state objects and collections, leading to memory exhaustion and an OutOfMemoryError. Versions 4.1.135.Final and 4.2.15.Final patch the issue. | ||||
| CVE-2026-42587 | 2 Io.netty, Netty | 3 Netty-codec-http, Netty-codec-http2, Netty | 2026-09-18 | 7.5 High |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.2.13.Final and 4.1.133.Final, HttpContentDecompressor accepts a maxAllocation parameter to limit decompression buffer size and prevent decompression bomb attacks. This limit is correctly enforced for gzip and deflate encodings via ZlibDecoder, but is silently ignored when the content encoding is br (Brotli), zstd, or snappy. An attacker can bypass the configured decompression limit by sending a compressed payload with Content-Encoding: br instead of Content-Encoding: gzip, causing unbounded memory allocation and out-of-memory denial of service. The same vulnerability exists in DelegatingDecompressorFrameListener for HTTP/2 connections. This vulnerability is fixed in 4.2.13.Final and 4.1.133.Final. | ||||
| CVE-2026-3505 | 1 Bouncycastle | 1 Bc-java | 2026-09-18 | 7.5 High |
| Allocation of resources without limits or throttling, Uncontrolled Resource Consumption vulnerability in Legion of the Bouncy Castle Inc. BC-JAVA bcpg on all (pg modules). This vulnerability is associated with program files AEADEncDataPacket.Java, BcAEADUtil.Java, JceAEADUtil.Java, OperatorHelper.Java. This issue affects BC-JAVA: from 1.74 before 1.80.2, from 1.81 before 1.81.1, from 1.82 before 1.84. | ||||
| CVE-2026-34982 | 1 Vim | 1 Vim | 2026-09-18 | 8.2 High |
| Vim is an open source, command line text editor. Prior to version 9.2.0276, a modeline sandbox bypass in Vim allows arbitrary OS command execution when a user opens a crafted file. The `complete`, `guitabtooltip` and `printheader` options are missing the `P_MLE` flag, allowing a modeline to be executed. Additionally, the `mapset()` function lacks a `check_secure()` call, allowing it to be abused from sandboxed expressions. Commit 9.2.0276 fixes the issue. | ||||
| CVE-2026-91711 | 1 Google | 1 Chrome | 2026-09-18 | 8.8 High |
| Out of bounds write in ServiceWorker in Google Chrome prior to 153.0.8010.47 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-76553 | 2026-09-18 | 6.5 Medium | ||
| The WP Import Export Lite WordPress plugin before 3.9.33 does not validate a path taken from stored, user-supplied data before recursively deleting the directory it resolves to, allowing users to whom an administrator has delegated a WP Import Export Lite WordPress plugin before 3.9.33 capability to delete arbitrary directories, and every file within them, including outside the web root. | ||||
| CVE-2026-54626 | 1 Happyseafox | 1 Sail | 2026-09-18 | 9.8 Critical |
| SAIL is a cross-platform library for loading and saving images with support for animation, metadata, and ICC profiles. In 0.9.10 and earlier, the TGA_INDEXED_RLE path selected by image_type == 9 allocates an image buffer using the one-byte-per-pixel SAIL_PIXEL_FORMAT_BPP8_INDEXED format returned by tga_private_sail_pixel_format() in src/sail-codecs/tga/helpers.c, while sail_codec_load_frame_v8_tga() in src/sail-codecs/tga/tga.c derives a two-to-four-byte pixel_size from an attacker-controlled header bpp value from 9 through 32. Loading a crafted color-mapped run-length-encoded TGA through sail_load_from_file() or sail_load_from_memory() therefore writes attacker-controlled bytes beyond the heap pixel buffer. The pixel-count clamp added for CVE-2026-40494 does not constrain the per-pixel write width, so this issue is an incomplete fix of that vulnerability and can cause heap corruption, a reliable crash, or potential code execution. This issue is fixed in version 1.0.0. | ||||
| CVE-2026-50285 | 1 Pomerium | 1 Pomerium | 2026-09-18 | 7.5 High |
| Pomerium is an identity and context-aware access proxy. Prior to 0.32.8, decodeQueryStringV2 in pkg/hpke/url.go performs zstd decompression of attacker-controlled data without an output-memory limit when DecryptURLValues processes HPKE V2 values for Stateless.Callback in internal/authenticateflow/stateless.go. In hosted or stateless authentication deployments, an unauthenticated attacker can obtain the receiver key from /.well-known/pomerium/hpke-public-key, provide a matching attacker-controlled sender key, and send a compressed payload to /.pomerium/callback that expands before validateSenderPublicKey rejects the sender. This can allocate hundreds of megabytes per request, exhaust proxy memory, crash or degrade the process, and block access to applications protected by the deployment. Stateful deployments are not affected because the stateful callback verifies its HMAC signature before decryption and decompression. This issue is fixed in version 0.32.8. | ||||
| CVE-2026-73447 | 2026-09-18 | 9.1 Critical | ||
| A privileged attacker can exploit certain operation to execute arbitrary commands with root privileges, leading to full device compromise. An authenticated user can exploit gRPC Network Security Interface (gNSI) Certz service on Arista EOS-based products to escalate privileges and execute arbitrary OS commands via a crafted Certz Rotate request. The Bootz service is also affected. | ||||
| CVE-2026-89804 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/dmem: fix mismatched DMA unmap size for large folios Device-private THP migration maps migration buffers with page_size() and records that length in dma_info->size. For a compound folio page_size() is PAGE_SIZE << order, but two teardown sites still pass a literal PAGE_SIZE to dma_unmap_page(): - nouveau_dmem_migrate_to_ram() on the success path, and - nouveau_dmem_migrate_copy_one() on the copy-error path. For an order > 0 folio this unmaps less than was mapped, leaking the remainder of the IOMMU/IOVA mapping. The other unmap sites, in nouveau_dmem_migrate_chunk() and nouveau_dmem_evict_chunk(), already use the saved size; use it here too. | ||||
| CVE-2026-89800 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/uvmm: clear the dirty flag when unwinding an OP_UNMAP_SPARSE A successful OP_UNMAP_SPARSE marks its region dirty with nouveau_uvma_region_dirty() and defers the teardown to nouveau_uvmm_bind_job_cleanup(); it does not remove the region from uvmm->region_mt. If a later op in the job fails, the unwind path never clears reg->dirty (set in one place, cleared nowhere) and sets op->reg = NULL, so cleanup skips the teardown. The region is left in the tree with dirty set and its completion never signalled. Later binds over that range then fail permanently -- -ENOENT or -EINVAL from the dirty checks, or an unkillable wait_for_completion() in bind_validate_region() -- for the lifetime of the uvmm. Clear reg->dirty when the unwind reverts the sparse unmap, restoring the region to the state it was found in. | ||||