Export limit exceeded: 416347 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 93518 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (93518 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-84108 | 1 Ibm | 1 Guardium Data Protection | 2026-09-19 | 8.1 High |
| IBM Guardium Data Protection 12.2 could allow a remote attacker to execute arbitrary code due to improper neutralization of input during web page generation. | ||||
| CVE-2026-84085 | 1 Ibm | 1 Guardium Data Protection | 2026-09-19 | 8.1 High |
| IBM Guardium Data Protection 12.2 could allow a remote attacker to execute arbitrary OS commands due to improper neutralization of special elements used in an OS command. | ||||
| CVE-2026-90369 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: fix out-of-bounds access in mmio copy helpers mt76_mmio_write_copy() and mt76_mmio_read_copy() iterate up to ALIGN(len, 4), so a length that is not a multiple of four reads past the source buffer (write_copy) or writes past the destination (read_copy). Copy the aligned body in the loop and handle the remaining tail through a 4-byte bounce buffer, keeping the register access width unchanged. | ||||
| CVE-2026-90391 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: lib/test_hmm: fail dmirror_fault() when the mirrored mm is gone dmirror_fault() is called from the dmirror_read() and dmirror_write() retry loops after dmirror_do_read() or dmirror_do_write() finds a missing device page table entry. If the mirrored mm has already exited, mmget_not_zero() fails. The current code returns 0 in that case, which tells the caller that faulting succeeded even though no page was faulted and no device page table entry was installed. The caller then retries the same address, hits -ENOENT again, and can loop forever without making progress. Return -EFAULT instead, so the ioctl fails when the mirrored mm is no longer faultable. | ||||
| CVE-2026-90434 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: isofs: release zisofs block pointer buffer head zisofs_fill_pages() reads the compressed block pointer table. The error paths release the current buffer_head, the loop also releases the old buffer_head when it advances. However, the success path leaves the last buffer_head referenced. Release it before returning success. | ||||
| CVE-2026-90411 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvme-fc: unmap cmd_iu DMA on rsp_iu mapping failure in init_request __nvme_fc_init_request() maps cmd_iu and then rsp_iu for DMA. If the rsp_iu mapping fails, the original code only recorded the error and fell through: it left the already-mapped cmd_iu unmapped and still marked the op as FCPOP_STATE_IDLE before returning. Since blk-mq does not call .exit_request() when .init_request() fails, the cmd_iu mapping is leaked for every op whose rsp_iu mapping fails. Jump to an error path on rsp_iu mapping failure that unmaps cmd_iu and returns the error without marking the op idle, so it stays in the FCPOP_STATE_UNINIT state set by the initial memset(). | ||||
| CVE-2026-90432 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Abort directly from the hardlockup handler scx_hardlockup() defers the abort to an irq_work because exit claiming used to take scx_sched_lock and couldn't run from NMI. The deferral is now unnecessary - claiming is NMI-safe and asserting ->aborting is exactly what breaks the live-locks that hard-lock CPUs. Call handle_lockup() directly and drop the irq_work. This also makes the self-detected case recoverable: the perf watchdog fires on the hard-locked CPU itself, where a queued irq_work never runs with IRQs off. Also fix the return value: %true used to be returned whenever sched_ext was loaded, suppressing the kernel's hardlockup report even when the abort was refused. Return %true only when this call initiated the abort. | ||||
| CVE-2026-92524 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3-its: Prevent leak in its_vpe_irq_domain_alloc() When its_irq_gic_domain_alloc() fails, the following its_vpe_irq_domain_free() fails to invoke its_vep_teardown() for the corresponding interrupt, which leaks the resource. Invoke its_vpe_teardown() in the error handling path to avoid the leak. [ tglx: Massaged change log ] | ||||
| CVE-2026-92486 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix CFI mismatch in task work callback BPF subprograms use the bpf_callback_t ABI, but task work invokes the callback through a three-argument function pointer. This trips kCFI. Store and invoke the callback as bpf_callback_t. | ||||
| CVE-2026-92516 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix offset warn check for bpf_res_spin_lock Sashiko pointed out correctly that the case statement for BPF_RES_SPIN_LOCK incorrectly checks offset for BPF_SPIN_LOCK. Fix it by checking res_spin_lock_off instead. | ||||
| CVE-2026-93065 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: fix counter type in iwl_fwrt_dump_error_logs The loop counter 'count' was declared as u8 while num_pc is u32. If firmware advertises more than 255 PC entries the counter wraps back to zero and the loop never terminates potentially causing an infinite loop or reading past the allocated pc_data array. Change the declaration to u32 to match num_pc. | ||||
| CVE-2026-5090 | 1 Toddr | 1 Template::plugin::html | 2026-09-19 | 6.1 Medium |
| Template::Plugin::HTML versions before 3.103 for Perl allows HTML and JavaScript to be injected. The html_filter function did not escape single quotes. HTML attributes inside of single quotes could be have code injected. For example, the variable "var" in <a id='ref' title='[% var | html %]'> would not be properly escaped. An attacker could insert some limited HTML and JavaScript, for example, var = " ' onclick='while (true) { alert(1) }'" Note that arbitrary HTML and JavaScript would be difficult to inject, because angle brackets, ampersands and double-quotes would still be escaped. | ||||
| CVE-2026-92622 | 2 Wordpress, Wpchill | 2 Wordpress, Strong Testimonials | 2026-09-19 | 6.4 Medium |
| The Strong Testimonials plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'lightbox_class' Shortcode Attribute in all versions up to, and including, 3.3.8 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Exploitation requires that the targeted testimonial view has at least one published testimonial with a featured image and the lightbox wrapper enabled, as the vulnerable code path is only reached when a thumbnail is rendered. | ||||
| CVE-2026-89881 | 1 Linux | 2 Kernel, Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: use vb2_video_unregister_device() on remove to fix DMA leak rtl2832_sdr_remove() runs on USB disconnect and clears dev->udev to NULL before any pending streaming teardown has run. When user space later closes its file descriptor, vb2 calls rtl2832_sdr_stop_streaming() which in turn calls rtl2832_sdr_free_stream_bufs(). That helper releases each coherent buffer with: usb_free_coherent(dev->udev, dev->buf_size, dev->buf_list[dev->buf_num], dev->dma_addr[dev->buf_num]); usb_free_coherent() returns immediately when its dev argument is NULL, so every DMA stream buffer that was live at disconnect is silently leaked. The URBs allocated in rtl2832_sdr_alloc_urbs() outlive the device for the same reason. The rtl2832_sdr driver uses vb2_fop_release() in its file_operations, so replace video_unregister_device(&dev->vdev) with vb2_video_unregister_device(&dev->vdev) and move it before clearing dev->udev. vb2_video_unregister_device() releases the vb2 queue, which synchronously runs rtl2832_sdr_stop_streaming() if streaming is active, so URBs and coherent DMA stream buffers are freed while dev->udev is still valid. vb2_video_unregister_device() locks vdev->queue->lock (vb_queue_lock) internally, and stop_streaming() locks v4l2_lock, so the previous outer mutex_lock(&dev->vb_queue_lock) / mutex_lock(&dev->v4l2_lock) pair around the unregister sequence would self-deadlock and has been removed. A short v4l2_lock critical section around dev->udev = NULL remains so any ioctl path that still holds the file descriptor sees coherent state. Issue identified by automated review of the INV-003 series at https://sashiko.dev/ | ||||
| CVE-2026-90981 | 2 Satollo, Wordpress | 2 Newsletter – Send Awesome Emails From Wordpress, Wordpress | 2026-09-19 | 6.1 Medium |
| The Newsletter – Send awesome emails from WordPress plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'nn' parameter in all versions up to, and including, 9.3.8 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. Successful exploitation requires the victim to be a logged-in administrator, as the antibot check auto-passes for authenticated users, routing the unsanitized payload through the administrator-visible output branch of dienow(). | ||||
| CVE-2026-90884 | 2 Brechtvds, Wordpress | 2 Wp Recipe Maker, Wordpress | 2026-09-19 | 5.4 Medium |
| The WP Recipe Maker plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'notes' parameter in all versions up to, and including, 10.8.1 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | ||||
| CVE-2026-93167 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: csky: Fix a4/a5 restoration in syscall trace path The syscall trace path reloads syscall arguments from pt_regs before calling the syscall handler. On C-SKY ABIv2, the 5th and 6th syscall arguments are prepared as stack arguments before invoking syscallid. The current code adjusts sp before loading LSAVE_A4 and LSAVE_A5. Since those offsets are relative to the original pt_regs base, loading them after changing sp fetches the wrong slots. As a result, traced syscalls that use the 5th or 6th argument may receive corrupted arguments. This is visible with mmap2(), which takes six arguments. A small PTRACE_SYSCALL reproducer opens a file and maps one page with: mmap(NULL, 4096, PROT_READ | PROT_EXEC, MAP_PRIVATE, fd, 0) Before the fix, the traced child fails the mmap and exits with 12. After the fix, the mapping succeeds and the child exits with 0. Fix the trace path by loading a4/a5 from pt_regs before changing sp. Tested on: ck860f, linux-4.19.15, C-SKY abiv2 | ||||
| CVE-2026-93173 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf,lsm: Drop bpf_prog_free from sleepable_lsm_hooks __bpf_prog_put_rcu() is the call_rcu() callback for non-sleepable programs. security_bpf_prog_free() called from there fires bpf_prog_free in softirq; if a sleepable LSM prog is attached to that hook, might_fault() BUGs: BUG: sleeping function called from invalid context in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 5038 preempt_count: 101, expected: 0 Call Trace: <IRQ> __bpf_prog_enter_sleepable+0x1cd/0x320 kernel/bpf/trampoline.c:1255 bpf_trampoline_6442549705+0x53/0xd7 security_bpf_prog_free+0xde/0x130 security/security.c:5465 __bpf_prog_put_rcu+0xab/0xd0 kernel/bpf/syscall.c:2365 rcu_do_batch kernel/rcu/tree.c:2617 [inline] handle_softirqs+0x236/0x800 kernel/softirq.c:622 </IRQ> The call_rcu/call_rcu_tasks_trace split reflects the freed program's sleepability, not that of any attached observer. security_bpf_prog_free() also frees prog->aux->security, which has to stay after the grace period, so drop bpf_prog_free from sleepable_lsm_hooks rather than move the call. Non-sleepable observers still run there. | ||||
| CVE-2026-93145 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clk: qcom: gdsc: tear down per-domain genpds in gdsc_unregister() gdsc_unregister() removes the OF provider entry and tears down the parent/subdomain wiring, but never calls pm_genpd_remove() on the individual generic_pm_domain structures registered by gdsc_init(): void gdsc_unregister(struct gdsc_desc *desc) { struct device *dev = desc->dev; size_t num = desc->num; gdsc_pm_subdomain_remove(desc, num); of_genpd_del_provider(dev->of_node); } That leaves dangling entries on the global gpd_list. After a provider unbind/rebind cycle (deferred-probe replay during early boot, real module unload of a clk driver that owns GDSCs, or an OF-overlay tear- down) the next gdsc_init() will end up trying to re-register a name that is still in the list and pm_genpd_init() returns -EEXIST. While we are here, flip the order so the consumer-facing OF provider entry is the first thing removed -- otherwise a fresh of_genpd_get_from_provider() call racing with the teardown could attach to a domain that is mid-removal. Iterate the scs[] array and pm_genpd_remove() each registered domain after the subdomain links are torn down. The regulators stay devm- managed (devm_regulator_get_optional() in gdsc_register()), so the release happens automatically when the underlying device is unbound; just the genpd accounting needs to be undone explicitly. | ||||
| CVE-2026-93308 | 1 O-ran-sc | 1 Smo Oam | 2026-09-19 | 4.3 Medium |
| A vulnerability was found in O-RAN-SC SMO OAM 2025-06-10. Affected by this vulnerability is an unknown functionality of the component VES Collector. Performing a manipulation results in allocation of resources. The attack may be initiated remotely. The exploit has been made public and could be used. The project was informed of the problem early through a bug report but has not responded yet. | ||||