Export limit exceeded: 11212 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 45451 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (45451 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89464 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: twl4030_charger: cancel workers via devm bci is devm-allocated. Two workers (bci->work and bci->current_worker) dereference it. twl4030_bci_remove() disables charging and masks interrupts. It cancels neither worker. A worker pending at remove() can run after devm frees bci. The USB transceiver comes from devm_usb_get_phy_by_node(). devm unregisters its notifier only after remove() returns. A cancel_work_sync() in remove() can then race a notifier reschedule. devm_work_autocancel() and devm_delayed_work_autocancel() avoid that. They cancel the workers during devm release, before bci is freed. The current_worker is registered first, since devm will cancel in reverse order and bci->work can reschedule current_worker. [Move comment about order into the commit message] | ||||
| CVE-2026-89461 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: max17040: synchronize work cancellation on suspend max17040_work() requeues itself after every poll. cancel_delayed_work() only cancels a pending instance and does not wait for a callback that is already running. If system suspend races with the polling callback, the callback can continue accessing the fuel gauge and requeue itself after the suspend callback returns. Use cancel_delayed_work_sync() to ensure polling is quiesced before suspend completes. | ||||
| CVE-2026-89458 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Do not complete a failed ESE read as successful dasd_int_handler() completes an NRF read of an unallocated ESE track by calling ese_read() and unconditionally marking the request DASD_CQR_SUCCESS. dasd_eckd_ese_read() can return an error before it has zeroed the destination buffer: a failed sense-data parse or a current track outside the requested range both return early, leaving the destination pages untouched. The request is still completed successfully, so the block layer is handed stale / uninitialized memory instead of zeros. Check the ese_read() return value and fail the request through the normal error path instead of forcing DASD_CQR_SUCCESS. | ||||
| CVE-2026-89440 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mmc: via-sdmmc: stop card-detect handling on probe failure request_irq() registers the SD card-detect interrupt and the probe enables it before mmc_add_host() runs. If mmc_add_host() fails, the error path only unmaps the registers and returns: the interrupt stays registered, so the handler keeps running against the host once it is freed. via_sdc_isr() dereferences sdhost and its MMIO base and schedules carddet_work, which via_sdc_card_detect() also runs against freed memory through its container_of() dereference. Add a probe-error path that disables and frees the interrupt and cancels carddet_work before unmapping. carddet_work can re-enable the device interrupt via via_reset_pcictrl(), which restores PCIINTCTRL, so mask it again after cancelling the work. This issue was found by an in-house static analysis tool and confirmed by manual code review. | ||||
| CVE-2026-81008 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: interconnect: Fix use after free in icc_get() and of_icc_get_by_index() In of_icc_get_by_index() and icc_get(), if the dynamic allocation for path->name fails via kasprintf(), the error handling path directly calls kfree(path) to free the path object and returns an error. However, prior to this point, path_find() calls path_init(), which already links the path's requests into the req_list of the respective interconnect nodes via hlist_add_head(). Directly invoking kfree(path) leaves dangling pointers in the hlist. A subsequent call to icc_get() or icc_set_bw() will traverse or modify these corrupted lists, triggering a slab use afterfree. KASAN report showing the vulnerability when reproducing via debugfs: BUG: KASAN: slab-use-after-free in path_find+0x6f8/0xcfc Write of size 8 at addr fff000000d43f748 by task sh/1 ... Call trace: kasan_report+0xac/0xfc path_find+0x6f8/0xcfc icc_get+0x148/0x380 icc_get_set+0xf8/0x2d0 ... Freed by task 1: kfree+0x1a0/0x4a4 icc_get+0x2cc/0x380 icc_get_set+0xf8/0x2d0 Fix this by replacing kfree(path) with the proper teardown function, icc_put(path), which safely removes the requests from the req_list using hlist_del() and drops the provider usage references before freeing the memory. Additionally, in icc_get(), ensure that the icc_lock mutex is released prior to calling icc_put(path) to avoid a deadlock, as icc_put() internally acquires the same lock. | ||||
| CVE-2026-80979 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: unregister the connection before draining the rx tasklet smc_conn_free() calls smc_ism_unset_conn() only while the link group is still on its device list, and never sets conn->killed. smc_lgr_terminate_sched() unlinks the group immediately and defers killing its connections to a work item, so a connection freed in that window keeps its smcd->conn[] slot with both gates in smcd_handle_irq() open, and the device can re-arm the receive tasklet after tasklet_kill() has returned. On the DMB-nocopy path the ghost send buffer is freed right after that drain, so the re-armed tasklet dereferences it. Unregister unconditionally and drain before the detach at both teardown sites, mirroring rmb_desc, which smc_buf_unuse() releases after the drain. Clear conn->sndbuf_desc before freeing it as well, so a reader that samples the pointer cannot get one that is already freed. | ||||
| CVE-2026-80965 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: serial-u16550: Check card index validity at probe serial-u16550 driver blindly trusts that the given devptr->id value is within the proper card index range at probe. It's OK for the devices the driver itself creates at the module probe time, but if the device is bound manually via sysfs interface, this could be -1 as "none", and this leads to OOB access for index[] and other parameters. Add a sanity check for the card index and warn/correct it if it's a value out of the range. | ||||
| CVE-2026-80952 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i3c: master: Fix info leak and UAF in device unregister path i3c_master_unregister_i3c_devs() clears i3cdev->dev->desc before calling device_unregister(). During device_unregister(), device_del() emits a KOBJ_REMOVE uevent and unbinds the driver while the device descriptor is still expected to be valid. As a result, i3c_device_uevent() and a racing modalias_show() can observe a NULL desc and fall back to an uninitialized stack struct i3c_device_info, leaking kernel stack contents in the generated modalias. Driver .remove() callbacks may also encounter an unexpected NULL desc during unbind. Keep desc valid until device_unregister() has completed. Since device_unregister() drops the device reference and may free the device, take an extra reference with get_device() before unregistering. Clear desc afterwards and release the extra reference with put_device(). This preserves the release-time invariant that desc must be NULL while avoiding both the information leak and a potential use-after-free from writing desc after the device has been released. | ||||
| CVE-2026-80938 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7615: avoid waiting for mac work under the mt76 mutex mt7615_suspend() acquired the mt76 mutex and then called cancel_delayed_work_sync() on mac_work. mt7615_mac_work() acquires the same mutex via mt7615_mutex_acquire() at the top of the worker, so if mac_work is already running and blocked on the mutex, the suspend path deadlocks waiting for the work it holds the mutex against. Flush scan_work and mac_work before taking the mutex, matching the suspend paths in mt7921 and mt7925. scan_work only takes the mt76 spinlock, but moving it keeps the sequence consistent. This also keeps mac_work from running over an already suspended HIF, which the previous split (async cancel under the lock, sync cancel after release) would have allowed. | ||||
| CVE-2026-80928 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smack: fix cred UAF in smack_file_send_sigiotask() When inspecting the credentials of another task, objective credentials (->real_cred, accessed with __task_cred()) must always be used. Accessing ->cred on a non-current task is forbidden unless that task is being created or destroyed; a task is allowed to change its own ->cred pointer with no synchronization, and changing ->cred should only affect the current syscall. smack_file_send_sigiotask() was accessing both sets of credentials: First tsk->cred, then __task_cred(tsk). Fix it, always access the objective credentials here. I have tested that this bug can lead to a KASAN-reported UAF of struct cred in smack_file_send_sigiotask(), and that this fix prevents the race. | ||||
| CVE-2026-45897 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_counter: serialize reset with spinlock Add a global static spinlock to serialize counter fetch+reset operations, preventing concurrent dump-and-reset from underrunning values. The lock is taken before fetching the total so that two parallel resets cannot both read the same counter values and then both subtract them. A global lock is used for simplicity since resets are infrequent. If this becomes a bottleneck, it can be replaced with a per-net lock later. | ||||
| CVE-2024-58097 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix RCU stall while reaping monitor destination ring While processing the monitor destination ring, MSDUs are reaped from the link descriptor based on the corresponding buf_id. However, sometimes the driver cannot obtain a valid buffer corresponding to the buf_id received from the hardware. This causes an infinite loop in the destination processing, resulting in a kernel crash. kernel log: ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309 ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309 ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed Fix this by skipping the problematic buf_id and reaping the next entry, replacing the break with the next MSDU processing. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 | ||||
| CVE-2026-90895 | 1 Misp | 1 Misp | 2026-09-14 | N/A |
| Affected versions of MISP’s interactive CLI shell implement access control independently from the normal web application, causing several authorization inconsistencies. The patch shows that CLI access could differ from the web application in multiple security-sensitive areas: - feed listings did not enforce the same lookup_visible restrictions for non-host-organisation users; - feed detail access did not enforce the same host-organisation/site-admin authorization as FeedsController::view(); - Feed.headers, which can contain HTTP authorization credentials, could be exposed instead of being hidden or masked; - server synchronization authkey values were not explicitly hidden from CLI detail output; - sharing-group detail access did not consistently use SharingGroup::checkIfAuthorised(); - the use command could establish context for a record without first proving that the user was authorized to view that record The commit additionally hardens pagination and terminal rendering, including neutralization of terminal control sequences found in database-backed values. Those are important hardening changes, but the main vulnerability is the CLI authorization/data-disclosure mismatch. Version affected: ≤2.5.45 | ||||
| CVE-2026-90894 | 2026-09-14 | 7.8 High | ||
| Parallels Desktop runs prl_disp_service as root. Local clients reach it on the world-writable socket /var/run/prl_disp_service.socket. PrlSrv_LoginLocal accepts peer credentials. No Parallels signature. No admin group. After login, PrlSrv_InstallAppliance lets you pick the appliance folder (sVmParentPath). The daemon unpacks with one string, tar -xf "%1" -C "%2", then Qt QProcess::splitCommand chops that string into words. A quote in the folder name closes early. The leftover text becomes extra tar flags. macOS tar --use-compress-program= runs the named program as root. | ||||
| CVE-2025-53341 | 2 Themovation, Wordpress | 2 Stratus, Wordpress | 2026-09-14 | 4.3 Medium |
| Missing Authorization vulnerability in Pixel Makers Creative INC. App, SaaS & Software Startup Tech Theme - Stratus allows Exploiting Incorrectly Configured Access Control Security Levels. This issue affects App, SaaS & Software Startup Tech Theme - Stratus: from n/a before 4.2.11. | ||||
| CVE-2026-86418 | 2 Misp, Misp-project | 2 Misp, Misp | 2026-09-14 | 4.3 Medium |
| Affected versions of MISP expose organisation metadata through the dashboard organisation picker without applying the same visibility restrictions enforced by the normal organisation index and per-organisation view. The affected endpoint returned fields including: - organisation ID; - UUID; - name. When Security.hide_organisation_index_from_users was enabled, normal organisation enumeration was restricted, but the dashboard picker still queried all organisations. This allowed authenticated users to discover organisations that should have remained hidden from them. The fix calls Organisation::createConditions($this->Auth->user()) and appends the resulting ACL conditions to the picker query. Ordinary users are thereby limited to organisations associated with events or proposals they can already see, plus their own organisation, while users with the appropriate sharing-group privilege retain broader visibility. Version affected: ≤2.5.45 | ||||
| CVE-2026-80161 | 3 Adobe, Apple, Microsoft | 7 Acrobat, Acrobat 2024, Acrobat Dc and 4 more | 2026-09-13 | 7.8 High |
| Acrobat Reader is affected by an Access of Resource Using Incompatible Type ('Type Confusion') vulnerability that could result in arbitrary code execution in the context of the current user. An attacker could exploit this vulnerability to execute arbitrary code. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-12956 | 2 Arraytics, Wordpress | 2 Eventin – Event Calendar, Event Registration, Tickets & Booking (ai Powered), Wordpress | 2026-09-13 | 5.3 Medium |
| The WP Event Solution (Eventin) plugin for WordPress is vulnerable to Missing Authorization in versions up to, and including, 4.1.22 via the create_item() handler for the /wp-json/eventin/v2/orders REST endpoint. The endpoint's create_item_permissions_check() function only verifies a wp_rest nonce (which is leaked to every visitor through the etn-public script's localized_data_obj on every frontend page) and accepts a user-supplied 'status' value in prepare_item_for_database() with no whitelist validation. This makes it possible for unauthenticated attackers to create etn-order posts with status='completed' that are counted as sold by etn_get_sold_tickets_by_event(); because the auto-cleanup wp_schedule_single_event() in create_item() only fires for status='pending' orders, the forged completed orders persist indefinitely and exhaust ticket inventory. | ||||
| CVE-2026-11821 | 2 Arraytics, Wordpress | 2 Eventin – Event Calendar, Event Registration, Tickets & Booking (ai Powered), Wordpress | 2026-09-13 | 5.4 Medium |
| The Eventin – Event Calendar, Event Registration, Tickets & Booking (AI Powered) plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 4.1.17. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with subscriber-level access and above, to view, create, update, clone, and delete notification flow event automation workflows that should be restricted to administrators. | ||||
| CVE-2026-19946 | 2 Awesomesupport, Wordpress | 2 Awesome Support Wordpress Helpdesk & Support, Wordpress | 2026-09-13 | 4.3 Medium |
| The Awesome Support plugin for WordPress is vulnerable to Missing Authorization in versions up to, and including, 6.3.9. This is due to a missing capability check on the wpas_do_mr_deny_user() function, which unlike its counterpart wpas_do_mr_activate_user() does not enforce current_user_can('edit_users') or current_user_can('edit_user', $user_id), relying solely on a nonce that is not scoped to the target user. This makes it possible for authenticated attackers, with subscriber-level access and above, to set the mr_user_denied flag on any user account — including administrators — permanently blocking their moderated activation and dispatching a denial notification email to the victim. | ||||