Export limit exceeded: 408271 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 408271 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 408271 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (408271 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31649 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix integer underflow in chain mode The jumbo_frm() chain-mode implementation unconditionally computes len = nopaged_len - bmax; where nopaged_len = skb_headlen(skb) (linear bytes only) and bmax is BUF_SIZE_8KiB or BUF_SIZE_2KiB. However, the caller stmmac_xmit() decides to invoke jumbo_frm() based on skb->len (total length including page fragments): is_jumbo = stmmac_is_jumbo_frm(priv, skb->len, enh_desc); When a packet has a small linear portion (nopaged_len <= bmax) but a large total length due to page fragments (skb->len > bmax), the subtraction wraps as an unsigned integer, producing a huge len value (~0xFFFFxxxx). This causes the while (len != 0) loop to execute hundreds of thousands of iterations, passing skb->data + bmax * i pointers far beyond the skb buffer to dma_map_single(). On IOMMU-less SoCs (the typical deployment for stmmac), this maps arbitrary kernel memory to the DMA engine, constituting a kernel memory disclosure and potential memory corruption from hardware. Fix this by introducing a buf_len local variable clamped to min(nopaged_len, bmax). Computing len = nopaged_len - buf_len is then always safe: it is zero when the linear portion fits within a single descriptor, causing the while (len != 0) loop to be skipped naturally, and the fragment loop in stmmac_xmit() handles page fragments afterward. | ||||
| CVE-2026-31642 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix call removal to use RCU safe deletion Fix rxrpc call removal from the rxnet->calls list to use list_del_rcu() rather than list_del_init() to prevent stuffing up reading /proc/net/rxrpc/calls from potentially getting into an infinite loop. This, however, means that list_empty() no longer works on an entry that's been deleted from the list, making it harder to detect prior deletion. Fix this by: Firstly, make rxrpc_destroy_all_calls() only dump the first ten calls that are unexpectedly still on the list. Limiting the number of steps means there's no need to call cond_resched() or to remove calls from the list here, thereby eliminating the need for rxrpc_put_call() to check for that. rxrpc_put_call() can then be fixed to unconditionally delete the call from the list as it is the only place that the deletion occurs. | ||||
| CVE-2026-31637 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: reject undecryptable rxkad response tickets rxkad_decrypt_ticket() decrypts the RXKAD response ticket and then parses the buffer as plaintext without checking whether crypto_skcipher_decrypt() succeeded. A malformed RESPONSE can therefore use a non-block-aligned ticket length, make the decrypt operation fail, and still drive the ticket parser with attacker-controlled bytes. Check the decrypt result and abort the connection with RXKADBADTICKET when ticket decryption fails. | ||||
| CVE-2026-31634 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: fix reference count leak in rxrpc_server_keyring() This patch fixes a reference count leak in rxrpc_server_keyring() by checking if rx->securities is already set. | ||||
| CVE-2026-31630 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: proc: size address buffers for %pISpc output The AF_RXRPC procfs helpers format local and remote socket addresses into fixed 50-byte stack buffers with "%pISpc". That is too small for the longest current-tree IPv6-with-port form the formatter can produce. In lib/vsprintf.c, the compressed IPv6 path uses a dotted-quad tail not only for v4mapped addresses, but also for ISATAP addresses via ipv6_addr_is_isatap(). As a result, a case such as [ffff:ffff:ffff:ffff:0:5efe:255.255.255.255]:65535 is possible with the current formatter. That is 50 visible characters, so 51 bytes including the trailing NUL, which does not fit in the existing char[50] buffers used by net/rxrpc/proc.c. Size the buffers from the formatter's maximum textual form and switch the call sites to scnprintf(). Changes since v1: - correct the changelog to cite the actual maximum current-tree case explicitly - frame the proof around the ISATAP formatting path instead of the earlier mapped-v4 example | ||||
| CVE-2026-31629 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: add missing return after LLCP_CLOSED checks In nfc_llcp_recv_hdlc() and nfc_llcp_recv_disc(), when the socket state is LLCP_CLOSED, the code correctly calls release_sock() and nfc_llcp_sock_put() but fails to return. Execution falls through to the remainder of the function, which calls release_sock() and nfc_llcp_sock_put() again. This results in a double release_sock() and a refcount underflow via double nfc_llcp_sock_put(), leading to a use-after-free. Add the missing return statements after the LLCP_CLOSED branches in both functions to prevent the fall-through. | ||||
| CVE-2026-31628 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/CPU: Fix FPDSS on Zen1 Zen1's hardware divider can leave, under certain circumstances, partial results from previous operations. Those results can be leaked by another, attacker thread. Fix that with a chicken bit. | ||||
| CVE-2026-31625 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: alps: fix NULL pointer dereference in alps_raw_event() Commit ecfa6f34492c ("HID: Add HID_CLAIMED_INPUT guards in raw_event callbacks missing them") attempted to fix up the HID drivers that had missed the previous fix that was done in 2ff5baa9b527 ("HID: appleir: Fix potential NULL dereference at raw event handle"), but the alps driver was missed. Fix this up by properly checking in the hid-alps driver that it had been claimed correctly before attempting to process the raw event. | ||||
| CVE-2026-31624 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: core: clamp report_size in s32ton() to avoid undefined shift s32ton() shifts by n-1 where n is the field's report_size, a value that comes directly from a HID device. The HID parser bounds report_size only to <= 256, so a broken HID device can supply a report descriptor with a wide field that triggers shift exponents up to 256 on a 32-bit type when an output report is built via hid_output_field() or hid_set_field(). Commit ec61b41918587 ("HID: core: fix shift-out-of-bounds in hid_report_raw_event") added the same n > 32 clamp to the function snto32(), but s32ton() was never given the same fix as I guess syzbot hadn't figured out how to fuzz a device the same way. Fix this up by just clamping the max value of n, just like snto32() does. | ||||
| CVE-2026-31622 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: NFC: digital: Bounds check NFC-A cascade depth in SDD response handler The NFC-A anti-collision cascade in digital_in_recv_sdd_res() appends 3 or 4 bytes to target->nfcid1 on each round, but the number of cascade rounds is controlled entirely by the peer device. The peer sets the cascade tag in the SDD_RES (deciding 3 vs 4 bytes) and the cascade-incomplete bit in the SEL_RES (deciding whether another round follows). ISO 14443-3 limits NFC-A to three cascade levels and target->nfcid1 is sized accordingly (NFC_NFCID1_MAXSIZE = 10), but nothing in the driver actually enforces this. This means a malicious peer can keep the cascade running, writing past the heap-allocated nfc_target with each round. Fix this by rejecting the response when the accumulated UID would exceed the buffer. Commit e329e71013c9 ("NFC: nci: Bounds check struct nfc_target arrays") fixed similar missing checks against the same field on the NCI path. | ||||
| CVE-2026-31617 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb() The block_len read from the host-supplied NTB header is checked against ntb_max but has no lower bound. When block_len is smaller than opts->ndp_size, the bounds check of: ndp_index > (block_len - opts->ndp_size) will underflow producing a huge unsigned value that ndp_index can never exceed, defeating the check entirely. The same underflow occurs in the datagram index checks against block_len - opts->dpe_size. With those checks neutered, a malicious USB host can choose ndp_index and datagram offsets that point past the actual transfer, and the skb_put_data() copies adjacent kernel memory into the network skb. Fix this by rejecting block lengths that cannot hold at least the NTB header plus one NDP. This will make block_len - opts->ndp_size and block_len - opts->dpe_size both well-defined. Commit 8d2b1a1ec9f5 ("CDC-NCM: avoid overflow in sanity checking") fixed a related class of issues on the host side of NCM. | ||||
| CVE-2026-31613 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB reads parsing symlink error response When a CREATE returns STATUS_STOPPED_ON_SYMLINK, smb2_check_message() returns success without any length validation, leaving the symlink parsers as the only defense against an untrusted server. symlink_data() walks SMB 3.1.1 error contexts with the loop test "p < end", but reads p->ErrorId at offset 4 and p->ErrorDataLength at offset 0. When the server-controlled ErrorDataLength advances p to within 1-7 bytes of end, the next iteration will read past it. When the matching context is found, sym->SymLinkErrorTag is read at offset 4 from p->ErrorContextData with no check that the symlink header itself fits. smb2_parse_symlink_response() then bounds-checks the substitute name using SMB2_SYMLINK_STRUCT_SIZE as the offset of PathBuffer from iov_base. That value is computed as sizeof(smb2_err_rsp) + sizeof(smb2_symlink_err_rsp), which is correct only when ErrorContextCount == 0. With at least one error context the symlink data sits 8 bytes deeper, and each skipped non-matching context shifts it further by 8 + ALIGN(ErrorDataLength, 8). The check is too short, allowing the substitute name read to run past iov_len. The out-of-bound heap bytes are UTF-16-decoded into the symlink target and returned to userspace via readlink(2). Fix this all up by making the loops test require the full context header to fit, rejecting sym if its header runs past end, and bound the substitute name against the actual position of sym->PathBuffer rather than a fixed offset. Because sub_offs and sub_len are 16bits, the pointer math will not overflow here with the new greater-than. | ||||
| CVE-2026-31612 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate EaNameLength in smb2_get_ea() smb2_get_ea() reads ea_req->EaNameLength from the client request and passes it directly to strncmp() as the comparison length without verifying that the length of the name really is the size of the input buffer received. Fix this up by properly checking the size of the name based on the value received and the overall size of the request, to prevent a later strncmp() call to use the length as a "trusted" size of the buffer. Without this check, uninitialized heap values might be slowly leaked to the client. | ||||
| CVE-2026-31611 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.6 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: require 3 sub-authorities before reading sub_auth[2] parse_dacl() compares each ACE SID against sid_unix_NFS_mode and on match reads sid.sub_auth[2] as the file mode. If sid_unix_NFS_mode is the prefix S-1-5-88-3 with num_subauth = 2 then compare_sids() compares only min(num_subauth, 2) sub-authorities so a client SID with num_subauth = 2 and sub_auth = {88, 3} will match. If num_subauth = 2 and the ACE is placed at the very end of the security descriptor, sub_auth[2] will be 4 bytes past end_of_acl. The out-of-band bytes will then be masked to the low 9 bits and applied as the file's POSIX mode, probably not something that is good to have happen. Fix this up by forcing the SID to actually carry a third sub-authority before reading it at all. | ||||
| CVE-2026-31586 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm: blk-cgroup: fix use-after-free in cgwb_release_workfn() cgwb_release_workfn() calls css_put(wb->blkcg_css) and then later accesses wb->blkcg_css again via blkcg_unpin_online(). If css_put() drops the last reference, the blkcg can be freed asynchronously (css_free_rwork_fn -> blkcg_css_free -> kfree) before blkcg_unpin_online() dereferences the pointer to access blkcg->online_pin, resulting in a use-after-free: BUG: KASAN: slab-use-after-free in blkcg_unpin_online (./include/linux/instrumented.h:112 ./include/linux/atomic/atomic-instrumented.h:400 ./include/linux/refcount.h:389 ./include/linux/refcount.h:432 ./include/linux/refcount.h:450 block/blk-cgroup.c:1367) Write of size 4 at addr ff11000117aa6160 by task kworker/71:1/531 Workqueue: cgwb_release cgwb_release_workfn Call Trace: <TASK> blkcg_unpin_online (./include/linux/instrumented.h:112 ./include/linux/atomic/atomic-instrumented.h:400 ./include/linux/refcount.h:389 ./include/linux/refcount.h:432 ./include/linux/refcount.h:450 block/blk-cgroup.c:1367) cgwb_release_workfn (mm/backing-dev.c:629) process_scheduled_works (kernel/workqueue.c:3278 kernel/workqueue.c:3385) Freed by task 1016: kfree (./include/linux/kasan.h:235 mm/slub.c:2689 mm/slub.c:6246 mm/slub.c:6561) css_free_rwork_fn (kernel/cgroup/cgroup.c:5542) process_scheduled_works (kernel/workqueue.c:3302 kernel/workqueue.c:3385) ** Stack based on commit 66672af7a095 ("Add linux-next specific files for 20260410") I am seeing this crash sporadically in Meta fleet across multiple kernel versions. A full reproducer is available at: https://github.com/leitao/debug/blob/main/reproducers/repro_blkcg_uaf.sh (The race window is narrow. To make it easily reproducible, inject a msleep(100) between css_put() and blkcg_unpin_online() in cgwb_release_workfn(). With that delay and a KASAN-enabled kernel, the reproducer triggers the splat reliably in less than a second.) Fix this by moving blkcg_unpin_online() before css_put(), so the cgwb's CSS reference keeps the blkcg alive while blkcg_unpin_online() accesses it. | ||||
| CVE-2026-31583 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: em28xx: fix use-after-free in em28xx_v4l2_open() em28xx_v4l2_open() reads dev->v4l2 without holding dev->lock, creating a race with em28xx_v4l2_init()'s error path and em28xx_v4l2_fini(), both of which free the em28xx_v4l2 struct and set dev->v4l2 to NULL under dev->lock. This race leads to two issues: - use-after-free in v4l2_fh_init() when accessing vdev->ctrl_handler, since the video_device is embedded in the freed em28xx_v4l2 struct. - NULL pointer dereference in em28xx_resolution_set() when accessing v4l2->norm, since dev->v4l2 has been set to NULL. Fix this by moving the mutex_lock() before the dev->v4l2 read and adding a NULL check for dev->v4l2 under the lock. | ||||
| CVE-2026-31580 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bcache: fix cached_dev.sb_bio use-after-free and crash In our production environment, we have received multiple crash reports regarding libceph, which have caught our attention: ``` [6888366.280350] Call Trace: [6888366.280452] blk_update_request+0x14e/0x370 [6888366.280561] blk_mq_end_request+0x1a/0x130 [6888366.280671] rbd_img_handle_request+0x1a0/0x1b0 [rbd] [6888366.280792] rbd_obj_handle_request+0x32/0x40 [rbd] [6888366.280903] __complete_request+0x22/0x70 [libceph] [6888366.281032] osd_dispatch+0x15e/0xb40 [libceph] [6888366.281164] ? inet_recvmsg+0x5b/0xd0 [6888366.281272] ? ceph_tcp_recvmsg+0x6f/0xa0 [libceph] [6888366.281405] ceph_con_process_message+0x79/0x140 [libceph] [6888366.281534] ceph_con_v1_try_read+0x5d7/0xf30 [libceph] [6888366.281661] ceph_con_workfn+0x329/0x680 [libceph] ``` After analyzing the coredump file, we found that the address of dc->sb_bio has been freed. We know that cached_dev is only freed when it is stopped. Since sb_bio is a part of struct cached_dev, rather than an alloc every time. If the device is stopped while writing to the superblock, the released address will be accessed at endio. This patch hopes to wait for sb_write to complete in cached_dev_free. It should be noted that we analyzed the cause of the problem, then tell all details to the QWEN and adopted the modifications it made. | ||||
| CVE-2026-31565 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix deadlock during netdev reset with active connections Resolve deadlock that occurs when user executes netdev reset while RDMA applications (e.g., rping) are active. The netdev reset causes ice driver to remove irdma auxiliary driver, triggering device_delete and subsequent client removal. During client removal, uverbs_client waits for QP reference count to reach zero while cma_client holds the final reference, creating circular dependency and indefinite wait in iWARP mode. Skip QP reference count wait during device reset to prevent deadlock. | ||||
| CVE-2026-31563 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: macb: Use dev_consume_skb_any() to free TX SKBs The napi_consume_skb() function is not intended to be called in an IRQ disabled context. However, after commit 6bc8a5098bf4 ("net: macb: Fix tx_ptr_lock locking"), the freeing of TX SKBs is performed with IRQs disabled. To resolve the following call trace, use dev_consume_skb_any() for freeing TX SKBs: WARNING: kernel/softirq.c:430 at __local_bh_enable_ip+0x174/0x188, CPU#0: ksoftirqd/0/15 Modules linked in: CPU: 0 UID: 0 PID: 15 Comm: ksoftirqd/0 Not tainted 7.0.0-rc4-next-20260319-yocto-standard-dirty #37 PREEMPT Hardware name: ZynqMP ZCU102 Rev1.1 (DT) pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __local_bh_enable_ip+0x174/0x188 lr : local_bh_enable+0x24/0x38 sp : ffff800082b3bb10 x29: ffff800082b3bb10 x28: ffff0008031f3c00 x27: 000000000011ede0 x26: ffff000800a7ff00 x25: ffff800083937ce8 x24: 0000000000017a80 x23: ffff000803243a78 x22: 0000000000000040 x21: 0000000000000000 x20: ffff000800394c80 x19: 0000000000000200 x18: 0000000000000001 x17: 0000000000000001 x16: ffff000803240000 x15: 0000000000000000 x14: ffffffffffffffff x13: 0000000000000028 x12: ffff000800395650 x11: ffff8000821d1528 x10: ffff800081c2bc08 x9 : ffff800081c1e258 x8 : 0000000100000301 x7 : ffff8000810426ec x6 : 0000000000000000 x5 : 0000000000000001 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000008 x1 : 0000000000000200 x0 : ffff8000810428dc Call trace: __local_bh_enable_ip+0x174/0x188 (P) local_bh_enable+0x24/0x38 skb_attempt_defer_free+0x190/0x1d8 napi_consume_skb+0x58/0x108 macb_tx_poll+0x1a4/0x558 __napi_poll+0x50/0x198 net_rx_action+0x1f4/0x3d8 handle_softirqs+0x16c/0x560 run_ksoftirqd+0x44/0x80 smpboot_thread_fn+0x1d8/0x338 kthread+0x120/0x150 ret_from_fork+0x10/0x20 irq event stamp: 29751 hardirqs last enabled at (29750): [<ffff8000813be184>] _raw_spin_unlock_irqrestore+0x44/0x88 hardirqs last disabled at (29751): [<ffff8000813bdf60>] _raw_spin_lock_irqsave+0x38/0x98 softirqs last enabled at (29150): [<ffff8000800f1aec>] handle_softirqs+0x504/0x560 softirqs last disabled at (29153): [<ffff8000800f2fec>] run_ksoftirqd+0x44/0x80 | ||||
| CVE-2026-31555 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: futex: Clear stale exiting pointer in futex_lock_pi() retry path Fuzzying/stressing futexes triggered: WARNING: kernel/futex/core.c:825 at wait_for_owner_exiting+0x7a/0x80, CPU#11: futex_lock_pi_s/524 When futex_lock_pi_atomic() sees the owner is exiting, it returns -EBUSY and stores a refcounted task pointer in 'exiting'. After wait_for_owner_exiting() consumes that reference, the local pointer is never reset to nil. Upon a retry, if futex_lock_pi_atomic() returns a different error, the bogus pointer is passed to wait_for_owner_exiting(). CPU0 CPU1 CPU2 futex_lock_pi(uaddr) // acquires the PI futex exit() futex_cleanup_begin() futex_state = EXITING; futex_lock_pi(uaddr) futex_lock_pi_atomic() attach_to_pi_owner() // observes EXITING *exiting = owner; // takes ref return -EBUSY wait_for_owner_exiting(-EBUSY, owner) put_task_struct(); // drops ref // exiting still points to owner goto retry; futex_lock_pi_atomic() lock_pi_update_atomic() cmpxchg(uaddr) *uaddr ^= WAITERS // whatever // value changed return -EAGAIN; wait_for_owner_exiting(-EAGAIN, exiting) // stale WARN_ON_ONCE(exiting) Fix this by resetting upon retry, essentially aligning it with requeue_pi. | ||||