Export limit exceeded: 416472 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (416472 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-116231 | 1 Oray | 1 Pugongying X5 Pro | 2026-10-26 | 9.9 Critical |
| A security flaw has been discovered in Oray Pugongying X5 Pro 7.6.1. The impacted element is an unknown function of the component Ser2net. Performing a manipulation of the argument regmsg results in crlf injection. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-98945 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: steam: Rearrange teardown sequence This fixes a narrow window during the teardown sequence where callbacks could still be scheduled during cleanup that would then have a dangling pointer to the now-freed steam struct. This also puts work canceling for rumble and mode switch in steam_unregister, as that shouldn't persist while the client hdev is open. | ||||
| CVE-2026-98944 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: steam: Refactor registration This refactors and simplifies the registration/unregistration flow. Since we now only perform registration when the client isn't opened anymore, the logic for handling that can be removed, and the rest of the function streamlined. We also remove the previous assumption that we have a serial number to show we're registered, replacing it with a single purpose boolean. In a previous refactor the code for unregistering a battery if later registration steps failed was accidentally left out. As a result, a lingering power_supply object could get left over after the steam object was torn down. This is also fixed here. | ||||
| CVE-2026-98942 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Build the cid tables privately and publish them with RCU The cid tables are visible to the cid kfuncs while being modified: the first enable publishes the global pointers before filling them, ops.init_cids() overrides rewrite them in place, and re-enables rebuild them in place. A racing TRACING or SYSCALL program can read unfilled entries, including uninitialized memory in the kmalloc'd tables, or torn topo updates. Tie the tables' lifetimes to the root sched instead: each root enable builds a fresh set privately and publishes the per-table __rcu globals once the layout is final, and root disable unpublishes and RCU-frees the set. A non-NULL global is now always a fully built table which stays valid for the reader's RCU read section, and lookups stay two loads. Kfuncs treat NULL as no-mapping, also after the scheduler exits instead of reporting the stale last mapping. The cid kfuncs are available whether the root scheduler is cid-form or cpu-form, the latter to allow gradual migration to cids. Every root therefore builds and publishes a default mapping. Every reader must either be gated on scheduler liveness or NULL-check inside an RCU read section. Fix the two kfuncs that were neither: scx_bpf_this_cid() read the table with no RCU or preemption protection and scx_bpf_task_cid() relied on KF_RCU, which doesn't put a sleepable program in an RCU read section. The hotplug callbacks are instead serialized by retiring the tables inside the cpus_read_lock() section that clears scx_root. v2: Document why every root builds the tables (desc + cid.c comment). | ||||
| CVE-2026-98937 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: perf/core: Check kernel access when kernel callchains are requested perf_event_open() currently gates perf_allow_kernel() only on !attr.exclude_kernel. However, users can still request kernel callchain collection with attr.exclude_callchain_kernel == 0 even when attr.exclude_kernel == 1. That still requires kernel profiling privilege, but the existing check does not enforce it. Update the permission check to call perf_allow_kernel() when either kernel sampling is requested or kernel callchains are requested. This keeps permission checks aligned with requested data and prevents unprivileged use of kernel callchain capture. | ||||
| CVE-2026-98926 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Remove sink usage from DPMS [Why] stream->sink is optional and can be null, so should always be checked before dereference. Additionally, most of its usage in DPMS sequences is for stream->sink->link, which can be replaced with stream->link, as the two should always be the same. [How] * Replace stream->sink->link in DPMS on/off * Add assert to USB4 BW allocation where sink is required * Avoid inconsistencies in resource access, e.g. don't repeat stream->link after it was already saved to a local variable * Pull out effective VPG calculation to helper getter * Formatting fixes | ||||
| CVE-2026-98917 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: parisc: Increase kernel stack size to 32kb For 64-bit Linux kernels, increase the default kernel stack size (THREAD_SIZE_ORDER) to 32 kB, in order to avoid kernel crashes which have been triggered recently when building the debian vtk9 package with gcc 17: stackcheck: kworker/u128:0 will most likely overflow kernel stack (sp:179a83af0, stk bottom-top:179a80000-179a84000) Kernel panic - not syncing: low stack detected by irq handler - check messages CPU: 2 UID: 0 PID: 30760 Comm: kworker/u128:0 Tainted: G W 6.18.46-dirty #1 NONE Tainted: [W]=WARN Hardware name: 9000/800/rp3440 Workqueue: writeback wb_workfn (flush-259:0) Backtrace: [<000000004022f050>] show_stack+0x70/0x90 [<000000004022378c>] dump_stack_lvl+0x124/0x190 [<000000004022382c>] dump_stack+0x34/0x48 [<000000004020212c>] vpanic+0x204/0x648 [<00000000402025c4>] panic+0x54/0x58 [<0000000040232230>] do_cpu_irq_mask+0x3f8/0x440 [<0000000040227070>] intr_return+0x0/0xc | ||||
| CVE-2026-98916 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: check link is beaconing for color change When trying to do a color change, validate that the link is beaconing first, to avoid calling the driver with an invalid link. | ||||
| CVE-2026-98914 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: cap ATOM command table nesting depth Cap nesting at 32 levels with execute_depth and return -ELOOP when exceeded. | ||||
| CVE-2026-98913 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: net: thunderx: fix PTP device ref leak in nicvf_probe() cavium_ptp_get() acquires a reference to the PTP PCI device through pci_get_device(). If any initialization step fails after cavium_ptp_get(), the PTP PCI device reference is leaked. Add a common error path to release the PTP reference before returning from probe failures. | ||||
| CVE-2026-98912 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: oss: Reject reads that cannot fit the next event snd_seq_oss_read() checks whether the next queued OSS sequencer event fits in the remaining userspace buffer before removing it from the read queue. The check is inverted. It currently stops when the event is smaller than the remaining buffer, so a normal 4-byte event is not copied for an 8-byte read buffer. Conversely, an 8-byte event can be copied for a smaller read count. Break only when the remaining userspace buffer is smaller than the next event, and report -EINVAL if no complete event has been copied. This prevents an undersized read from looking like end-of-file while leaving the event queued for a later read with a large enough buffer. | ||||
| CVE-2026-98911 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: fix the error path in dpaa2_switch_rx() In case of an error in dpaa2_switch_rx(), the dpaa2_switch_free_fd() function is called in order to free the FD. This is incorrect since the dpaa2_switch_free_fd() is intended to be used on Tx frame descriptors, meaning that it expects in the software annotation area of the FD data to find a valid skb pointer on which to call dev_kfree_skb(). Fix this by extracting the dma_unmap_page() from dpaa2_switch_build_linear_skb() directly into the dpaa2_switch_rx() function. This allows us to directly use free_pages() in case of an error before an SKB was created and kfree_skb() afterwards. | ||||
| CVE-2026-98906 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: lan966x: restore RX state on reload failure lan966x_fdma_reload() backs up rx->page_pool and rx->fdma before reallocating the RX resources for the new MTU. If the allocation fails, the restore path puts these fields back before restarting RX. However, the reload path also updates rx->page_order and rx->max_mtu before calling lan966x_fdma_rx_alloc(). These fields are not restored on failure, so RX can be restarted with the old pages, old FDMA state and old page pool, but with the page geometry from the failed new MTU. This can make the XDP path advertise a frame size derived from the new page_order while the actual RX pages still come from the old allocation. For example, after a failed reload to a jumbo MTU, xdp_init_buff() may be called with a frame size larger than the restored RX pages. lan966x_fdma_rx_alloc_page_pool() also registers the newly allocated page pool with each port's XDP RXQ before fdma_alloc_coherent() is called. If fdma_alloc_coherent() fails, the new page pool is destroyed, but the rollback path does not restore the per-port XDP RXQ mem model registration either. Save and restore rx->page_order and rx->max_mtu, and restore the old page pool registration for each port's XDP RXQ before RX is started again. This keeps the restored RX state consistent after a failed reload. | ||||
| CVE-2026-98904 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: imx: Use devm_pm_runtime_enable() sashiko complained about early usage of the device while probe isn't completed. This can be mitigated by delaying the pm_runtime_enable() into the removal path instead doing it early. This ensures that in an error case the device is removed (and imx_mu_shutdown()) before pm_runtime_disable() so we don't have to do this manually. For the order to work, lets move devm_mbox_controller_register() until after the pm-runtime part. So the reverse order will be mbox-controller removal followed by disabling pm runtime. Use devm_pm_runtime_enable(), remove manual pm_runtime_disable() invocations and move the pm_runtime handling in probe before devm_mbox_controller_register(). | ||||
| CVE-2026-98902 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid5: let stripe batch bm_seq comparison wrap-safe Once the 32-bit seq wraps, a newer bm_seq can look smaller than old, so .. covert to wrap-safe calculate way. | ||||
| CVE-2026-98894 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/ras: reset CPER ring on corrupt entry size When CPER ring overflow handling advances the read pointer, it trusts the parsed entry size from the current ring contents. Corrupt CPER data can produce an entry size that does not advance rptr after dword conversion and pointer masking. In that case the recovery loop keeps testing the same location while holding the CPER ring mutex. This can hang the worker that is writing the next CPER record. Detect a no-progress rptr update and reset the CPER ring to an empty state instead. This drops the corrupt contents and lets the writer leave the recovery path without spinning. | ||||
| CVE-2026-98893 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Validate SENSOR_UPDATE payload size SENSOR_UPDATE carries one or more sensor readings after the fixed notification header. The parser derives the expected reading count from the sensor description, but it did not verify that the received payload contains those entries before parsing them. Reject truncated update notifications before reading the variable array. | ||||
| CVE-2026-98891 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: validate deauth frame length before reason access ieee80211_rx_mgmt_deauth() reads the deauth reason code before checking that the fixed field is actually present in the received frame. Validate the deauth frame length first and only then read the reason code. | ||||
| CVE-2026-98887 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211_hwsim: reject undersized HWSIM_ATTR_TX_INFO hwsim_tx_info_frame_received_nl() casts the HWSIM_ATTR_TX_INFO payload to a struct hwsim_tx_rate * and unconditionally reads IEEE80211_TX_MAX_RATES entries (8 bytes) from it. The policy only bounds the attribute from above (NLA_BINARY .len is a maximum) and the op sets GENL_DONT_VALIDATE_STRICT, so a short or zero-length attribute is accepted and the loop reads past the payload. Require the exact length in the policy, so a malformed attribute is rejected before the handler runs. | ||||
| CVE-2026-98878 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v5: Immediately exec priority drop following activate With GICv5 an interrupt of equal or lower priority cannot be signalled until there has been a priority drop. This is done via the GIC CDEOI system instruction. Once this has been executed, the hardware is able to signal the next interrupt if there is one. As all interrupts are programmed to have the same priority, no new interrupts can be signalled until the priority drop has happened. This can cause issues when, for example, an interrupt remains active while a long running process takes place, such as when injecting a physical interrupt into a guest VM in software. The GICv5 driver has so far done the priority drop as part of irq_eoi(), i.e., at the same time as deactivating the interrupt. This means that any long running process (or VM) could block incoming interrupts, effectively causing a denial of service for all other interrupts. Rather than doing the EOI as part of irq_eoi() (which the name would suggest would be a good place for it), move it to happen immediately after acknowledging an interrupt in the main GICv5 interrupt handler. The deactivation of interrupts (GIC CDDI) remains implemented as part of irq_eoi(), which means that the same interrupt cannot be signalled a second time until deactivated by software. | ||||