Export limit exceeded: 15134 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (15134 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-21121 | 1 Samsung Mobile | 1 Samsung Mobile Devices | 2026-10-12 | N/A |
| Improper handling of insufficient permission in CmcCore prior to SMR Oct-2026 Release 1 allows local attackers to use the privileged APIs. | ||||
| CVE-2026-78359 | 2026-10-12 | 5.4 Medium | ||
| OTRS does not sufficiently enforce the uniqueness of customer user identities across multiple configured CustomerUser backends. When multiple backends, such as a database and LDAP, are configured, the uniqueness check for customer user email addresses is performed only within the selected backend. As a result, an authenticated user with permission to create or modify customer users may create a customer user whose email address is already assigned to a customer user in another backend. This can result in multiple customer user records representing the same communication identity. Depending on the affected workflow and backend resolution, customer-related information or email communication may subsequently be associated with or exposed to the wrong customer user. The vulnerability does not allow unauthenticated users to create customer accounts. Exploitation requires permissions to create or modify customer users. This issue affects OTRS: * 7.0.X * 8.0.X * 2023.X * 2024.X * 2025.X * 2026.X before 2026.7.X Please note that ((OTRS)) Community Edition 6.x and before are vulnerable. Products based on the ((OTRS)) Community Edition also very likely to be affected | ||||
| CVE-2026-108809 | 1 Eleveo | 1 Call Recording Software | 2026-10-12 | 3.5 Low |
| A vulnerability was identified in Eleveo Call Recording Software up to 10.3.0. This issue affects some unknown processing of the file /auth/realms/default/protocol/openid-connect/logout. The manipulation leads to session expiration. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-107193 | 1 Redhat | 1 Satellite | 2026-10-12 | 6.5 Medium |
| A flaw has been found in **permission filters** in the **foreman** package. The API loads a filter by its identifier and does not apply the search limit on the caller's permission. A low-privileged network attacker or user must already be allowed to delete filters for one role only. They can delete filters that belong to other unlocked roles. Those other roles then lose the access the deleted filters had granted. | ||||
| CVE-2026-108981 | 2026-10-12 | 3.6 Low | ||
| ngx_cache_purge before 3.0.4 can allow file deletion via a symlink attack in certain situations where nginx and a served application (e.g., WordPress) run under the same user account. The attacker must be able to create a symlink inside the cache path. Version 3.0.4 fixes this for the case of a symlink created at an arbitrary earlier time, but does not resolve an applicable TOCTOU race condition. (The ngx_cache_purge module follows symlinks while walking the cache directory tree during purge operations. The module relies on nginx's ngx_walk_tree(), which relies on stat() and therefore follows symlinks.) | ||||
| CVE-2026-108797 | 1 Zkteco | 1 Biotime | 2026-10-12 | 4.3 Medium |
| A vulnerability has been found in ZKTeco BioTime 9.5.6 Build 20260130.3206. This vulnerability affects unknown code of the file /personnel/api/employees/ of the component Employee REST API. The manipulation leads to authorization bypass. The attack may be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-108796 | 1 Zkteco | 1 Biotime | 2026-10-12 | 4.3 Medium |
| A flaw has been found in ZKTeco BioTime 9.5.6 Build 20260130.3206. This affects an unknown part of the file /iclock/finger_data/ of the component Biometric Data Endpoint. Executing a manipulation of the argument emp_code can lead to authorization bypass. The attack can be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-17615 | 1 Redhat | 21 Apache Camel Quarkus, Apicurio Registry, Build Keycloak and 18 more | 2026-10-12 | 7.5 High |
| A flaw was found in RESTEasy's SourceProvider. This vulnerability allows an unauthenticated attacker to perform an unauthenticated remote file read. By sending a specially crafted XML body with a DOCTYPE declaration referencing external entities to an endpoint that accepts application/xml and returns Source or StreamSource, the server can be tricked into resolving the entity and including sensitive file contents in the HTTP response. This is due to the SourceProvider.writeTo() method creating a SAXParser without disabling external entity resolution, leading to an XML External Entity (XXE) vulnerability. | ||||
| CVE-2026-108785 | 1 Macrozheng | 1 Mall | 2026-10-12 | 6.3 Medium |
| A flaw has been found in macrozheng mall up to 1.0.3. This issue affects the function JwtTokenUtil.refreshHeadToken of the file /admin/refreshToken of the component JwtAuthenticationTokenFilter. This manipulation of the argument token causes session expiration. The attack may be initiated remotely. The exploit has been published and may be used. Patch name: 9bfc2fd2c4aaa4ac519e9152e65d673a5380de1a. To fix this issue, it is recommended to deploy a patch. | ||||
| CVE-2026-19739 | 1 Zephyrproject | 1 Zephyr | 2026-10-11 | 6.5 Medium |
| The Bluetooth Link Layer control procedure code in subsys/bluetooth/controller/ll_sw/ull_llcp_conn_upd.c retains the received RX node while a Connection Update / Connection Parameter procedure waits for its instant, so the node can later carry the host notification (llcp_rx_node_retain(), which marks it NODE_RX_TYPE_RETAIN and thereby suppresses the normal recycling in ull.c). The default: arm of llcp_rp_cu_rx() and llcp_lp_cu_rx() — the "invalid PDU, terminate the connection" path — completed the procedure without releasing that retained node. llcp_rr_check_done() then dequeued and freed the procedure context with ctx->node_ref.rx still pointing at the retained node, dropping the last reference to it. A peer device in radio range can reach this without pairing, bonding, or encryption. Against a peripheral, the peer sends a well-formed LL_CONNECTION_UPDATE_IND with an instant a few connection events in the future (the node is retained and the procedure enters RP_CU_STATE_WAIT_INSTANT), then, before the instant is reached, sends any other LL Control PDU such as LL_LENGTH_REQ. ull_cp_rx() routes that PDU into the active remote Connection Update procedure, which takes the invalid-PDU path. The central role is reachable symmetrically after accepting an LL_CONNECTION_PARAM_REQ, and the local-procedure variant is reachable with LL_REJECT_IND. With CONFIG_BT_CTLR_ASSERT_DEBUG enabled (its default), the resulting state violates the invariant asserted in llcp_rr_check_done(), so the two-PDU sequence produces an immediate fatal error in the controller. With those asserts disabled, each occurrence permanently loses one node from the controller's small fixed RX pool (sized from CONFIG_BT_CTLR_RX_BUFFERS, which defaults to 1); repeating the sequence across reconnections exhausts the pool, after which the link-layer receive path operates on a NULL node. The impact is an unauthenticated, remotely triggerable denial of service persisting until reboot; there is no memory-disclosure or memory-corruption consequence, since the leaked node simply becomes unreachable. | ||||
| CVE-2026-19740 | 1 Zephyrproject | 1 Zephyr | 2026-10-11 | 6.5 Medium |
| The Link Layer Control Procedure (LLCP) implementation of the Zephyr software Bluetooth LE Controller retains the receive node that carried an accepted LL_PHY_UPDATE_IND so that it can later be reused for the host notification when the update instant is reached (llcp_rx_node_retain() in subsys/bluetooth/controller/ll_sw/ull_llcp.c, and the node is deliberately not recycled while marked NODE_RX_TYPE_RETAIN). The invalid-PDU arms of llcp_lp_pu_rx() and llcp_rp_pu_rx() in subsys/bluetooth/controller/ll_sw/ull_llcp_phy.c completed the procedure via llcp_lr_complete() / llcp_rr_complete() without first releasing that retained node, so the procedure context — the only remaining reference to the node — was freed while the node was still held out of the receive pool. A peer device on an established LE connection can drive this deterministically and without pairing or encryption. Against a peripheral it sends LL_PHY_REQ, receives LL_PHY_RSP, sends a valid LL_PHY_UPDATE_IND with an instant a few connection events in the future (so the node becomes retained), and then, before the instant is reached, sends any other LL Control PDU such as LL_LENGTH_REQ; ull_cp_rx() routes it to the active remote PHY Update procedure, which takes the invalid-PDU path. The mirror case applies to a locally initiated PHY Update followed by an LL_REJECT_IND. In the default configuration (CONFIG_BT_ASSERT and CONFIG_BT_CTLR_ASSERT_DEBUG both default y) the violated invariant in llcp_lr_check_done() / llcp_rr_check_done() triggers a controller assertion, ending in k_oops() (or k_panic()) — a single crafted PDU sequence from radio range faults the device. With those assertions compiled out, each attempt silently leaks one receive PDU node and its memq link; because the controller receive pool is small (PDU_RX_CNT, driven by CONFIG_BT_CTLR_RX_BUFFERS, which defaults to 1) and each attempt costs the attacker only a reconnect, a few repetitions exhaust the pool and leave Bluetooth inoperable until reboot. On releases v3.4.0 through v3.7.x the assertion is never reached, whatever the configuration, so every attempt leaks silently. The impact is limited to availability: the orphaned node leaves no dangling pointer that is later dereferenced and is never delivered to the host, so there is no memory corruption or information disclosure. The same pull request applies the identical release to the Connection Update and CIS-create procedures, whose invalid-PDU arms had the same omission. | ||||
| CVE-2026-108879 | 1 Jeecg | 2 Jeecg-boot, Jeecg Boot | 2026-10-11 | 4.3 Medium |
| JeecgBoot through 3.9.5 contains an insecure direct object reference vulnerability in AiragBaseApiController that allows authenticated users to read other users' AI chat variables via the username parameter. Attackers can send POST requests to /airag/api/getChatVariable with a target appId, username, and variable name to retrieve stored chat memory values from Redis. | ||||
| CVE-2026-108574 | 2 Berriai, Litellm | 2 Litellm, Litellm | 2026-10-11 | 4.3 Medium |
| A flaw has been found in BerriAI LiteLLM up to 1.95.0. Affected by this issue is the function ui_view_session_spend_logs of the file litellm/proxy/spend_tracking/spend_management_endpoints.py of the component Spend Tracking. Executing a manipulation of the argument session_id can lead to authorization bypass. It is possible to launch the attack remotely. The exploit has been published and may be used. Upgrading to version 1.96.0 can resolve this issue. This patch is called 722d9ffa4f6c5ae15702ab9ab2c5f6bf1688308b. The affected component should be upgraded. | ||||
| CVE-2026-93746 | 2026-10-11 | 7.5 High | ||
| The WebToffee WooCommerce PDF Invoices, Packing Slips, Delivery Notes & Shipping Labels plugin for WordPress is vulnerable to Insecure Direct Object Reference in versions up to, and including, 5.0.2 via the 'email' parameter of the guest print_document_from_the_mail_link handler dispatched from print_window() on init. This is due to the handler authorizing access to an order's printable documents when the attacker-supplied (base64-encoded) 'email' equals the order's billing email — a non-secret identifier — instead of requiring the WooCommerce order_key. This makes it possible for unauthenticated attackers, when the site is configured to allow guest access to documents ('wt_pklist_print_button_access_for' != 'logged_in'), to retrieve any other customer's invoice, packing slip, delivery note, dispatch label or shipping label — including customer name, billing/shipping address, phone number, purchased products, prices, taxes and invoice metadata — by knowing the target order ID and the associated billing email address. | ||||
| CVE-2026-91050 | 2026-10-11 | 4.3 Medium | ||
| The Appointment Booking Plugin – LatePoint | Calendar & Scheduling for WordPress plugin for WordPress is vulnerable to Insecure Direct Object Reference / Missing Authorization in versions up to, and including, 5.7.2. This is due to the publicly reachable steps__start and steps__load_step routes accepting a params[presets][order_item_id] value that is copied verbatim into the booking object without verifying that the referenced order item belongs to the current customer, is a bundle item, is paid, or has remaining capacity — the is_bundle_scheduling() bundle discriminator is a mere !empty(order_item_id) truthiness check, and the code flow explicitly removes the customer and payment steps when this is truthy (the source even carries a TODO acknowledging the missing validation). This makes it possible for unauthenticated attackers to create approved appointments against other customers' order items and to read those customers' names, email addresses, and order codes returned in the booking confirmation. | ||||
| CVE-2026-39453 | 1 Red Lion Controls | 1 700 Series | 2026-10-11 | 8.3 High |
| Navigating to a certain URL on the switch’s web server causes the switch to reboot. This can be automated using a tool like curl to create DoS conditions where the switch constantly reboots. | ||||
| CVE-2026-104898 | 2026-10-11 | 6.8 Medium | ||
| The Online Scheduling and Appointment Booking System – Bookly plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 28.4 via the 'id, wp_user_id' parameter due to missing validation on a user controlled key. This makes it possible for authenticated attackers, with subscriber-level access and above, to overwrite the WordPress account binding of any Bookly staff record, including those owned by administrators, effectively hijacking a higher-privileged staff member's account association and escalating privileges. Exploitation requires the attacking user to be linked to at least one Bookly staff record, which occurs by default whenever an admin enables the bookly_gen_allow_staff_edit_profile option (active on fresh installs) and links a WordPress user to a staff entry. | ||||
| CVE-2026-102262 | 1 Newell Brands | 1 Dymo Id | 2026-10-11 | 7.3 High |
| Newell Brands DYMO ID 1.5.1.71 resolves its plugin Modules directory relative to the process working directory. An attacker could store a job file alongside malicious modules / DLL that sets the process working directory to the job file's folder when a victim clicks on the file, resulting in code execution at the victim's privilege level. Fixed in 1.6.0. | ||||
| CVE-2026-101893 | 1 Newell Brands | 1 Dymo Id | 2026-10-11 | 4.4 Medium |
| Newell Brands DYMO ID 1.5.1.71 parses job files using XmlDocument.Load() without disabling DTD processing. The PC Job Files view automatically parses every recognized job file extension on folder browse. A crafted file on any browsed network share can perform SSRF, capture NTLMv2 credentials, read local files, or crash the process. Fixed in 1.6.0. | ||||
| CVE-2026-98306 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: seg6: set IPSKB_L3SLAVE from IP6SKB_L3SLAVE on IPIP decapsulation When an SRv6 packet arrives on an interface enslaved to a VRF, vrf_ip6_rcv() sets IP6SKB_L3SLAVE in IP6CB, but decap_and_validate() has never set IPSKB_L3SLAVE in IPCB. The bit stayed clear in the common case, and with CONFIG_IPV6_MIP6 the leftover frag_max_size of a reassembled outer packet could even set it, with no VRF involved. Commit 44930446dde4 ("ipv6: seg6: clear IPv4 control block on IPIP decapsulation") then made the unreliable bit reliably clear. The effect of the missing flag is visible with End.DX4 when a delivery to a local address of the node reaches the socket lookup. For example, a UDP socket bound to the enslaved ingress interface does not receive any of the decapsulated packets, while an unbound socket outside the VRF does. This contradicts Documentation/networking/vrf.rst: by default the scope of an unbound UDP or TCP socket is limited to the default VRF. Set IPSKB_L3SLAVE for IPv4 in decap_and_validate(), which already does the same for IPv6. The socket lookup then matches the decapsulated packet like any other packet received on that enslaved interface. Such a packet matches an unbound UDP or TCP socket only when udp_l3mdev_accept or tcp_l3mdev_accept is set. | ||||