Export limit exceeded: 408485 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 408485 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (408485 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97989 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vduse: validate virtqueue alignment vduse_validate_config() only checks the upper bound of vq_align. Invalid values can therefore reach vring_create_virtqueue_map(). The split-ring helpers use align - 1 as a bit mask, so the alignment must be a non-zero power of two. A zero value makes vring_size() drop the descriptor and available-ring part and vring_init() leave the used ring pointer NULL. The VIRTIO spec requires the used ring to start at an address aligned to at least 4 bytes. Reject values below VRING_USED_ALIGN_SIZE as well as non-power-of-two values before they reach the virtio ring helpers. Opening a virtio-net device created with vq_align=0 triggered: BUG: KASAN: null-ptr-deref in virtqueue_kick_prepare_split+0xe3/0x100 Read of size 2 at addr 0000000000000000 by task systemd-network/1062 Call Trace (relevant frames): dump_stack_lvl print_report kasan_report __asan_load2 virtqueue_kick_prepare_split+0xe3/0x100 virtqueue_kick_prepare+0x40/0x60 try_fill_recv+0x857/0x1250 virtnet_open+0x189/0x460 __dev_open+0x225/0x390 __dev_change_flags+0x368/0x3b0 netif_change_flags+0x56/0xc0 do_setlink.isra.0+0x68c/0x1e30 Validate the value before it reaches the virtio ring helpers. | ||||
| CVE-2026-97988 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost: invalidate vring access on IOTLB transitions When VIRTIO_F_ACCESS_PLATFORM changes, cached vring pointers and IOTLB metadata are interpreted in a different address space. Keeping them across the transition can leave stale ring mappings in use. Clearing d->iotlb before taking the VQ locks also lets a worker observe a transient NULL d->iotlb and fall back to d->umem while translating a descriptor. Add a common vhost_clear_device_iotlb() helper for vhost-net and vhost-vsock. Take all VQ mutexes in index order before dropping the device-wide IOTLB, invalidate each VQ's cached ring access and metadata, clear pending IOTLB messages, and free the old table after the handoff. This serializes the transition with workers and prevents mixed address space mappings. On the first direct-to-IOTLB transition, invalidate the cached vring addresses. When an existing device IOTLB is replaced, preserve the GIOVA ring addresses and reset only the metadata cache. After clearing ACCESS_PLATFORM, userspace must configure the vring addresses for the new address mode. vhost_vq_invalidate_access() clears desc, avail, and used together. Treat the VQ as invalidated only when all three are NULL, since a single GIOVA address may legitimately be zero. | ||||
| CVE-2026-97933 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Take trace_array reference when opening a tracer options file When a tracer option file is opened, it is passed a descriptor that points to an element on the trace_array's topts array. This element has information to find the trace array and other information. It uses this element to take a reference of the trace_array so that the trace_array does not get removed while this file is opened. Unfortunately, there's a race condition where the element itself could be freed by the removal of the instance the trace_array represents causing a use-after-free as this element that is used to find the trace_array to increment its reference counter is also freed when the instance is removed. To solve this, add a trace_array_tracer_options_get() helper function that will take the address of the element that is passed to the open function by the inode->i_private pointer and search all the trace_arrays under a lock to find the one that the element's address is in the range of the trace_arrays topts array elements. When a match happens, that trace_array's reference would be increased. Note, there's a race where if an admin was deleting and creating trace instances at the same time and the memory of the old trace_array's array matched the memory of the new trace_array that it could in theory open the option from the wrong trace array. But we do not care because it would be stupid to perform that kind of action. As long as the only thing that can happen is that the option from the wrong trace array is used and doesn't crash the kernel it will only make the user confused. But if they are doing something stupid like this, they are already confused, so no harm done. | ||||
| CVE-2026-97928 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: skip the VMID 0 flush for VRAM Clear-on-release only runs on VRAM, which amdgpu_ttm_map_buffer() reaches via its direct MC address without programming a GART window, yet the wipe still forces a VMID 0 flush. On GFX11 (e.g. Navi33) that spurious SDMA flush can wedge the engine; only flush when a GART window is actually used. v2: Let amdgpu_ttm_map_buffer() return whether the VMID 0 flush is needed, and drive the clear and copy paths from that. (Christian) v3: Make the vm_needs_flush output parameter mandatory instead of allowing NULL. (Christian) (cherry picked from commit a306e406e570b74318ff7d80e5b07b540ca1d3a9) | ||||
| CVE-2026-97567 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: prevent race between disconnect() and rtx Sashiko noted that the two event can race, leading to inconsistent status. Prevent the race using the synchronous timer stop operation. | ||||
| CVE-2026-97561 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: honor forceuid/forcegid when mapping SIDs to uid/gid When the administrator mounts with forceuid or forcegid (uid=/gid= mount options), they expect all files to appear owned by the specified user/group. However, several code paths unconditionally called sid_to_id() to overwrite cf_uid/cf_gid with server-provided values, ignoring the administrator's explicit override: - smb311_posix_info_to_fattr() (stat via POSIX extensions) - cifs_posix_to_fattr() (readdir via POSIX extensions) - parse_sec_desc() (CIFS ACL ownership mapping) This allowed an untrusted server to dictate local file ownership even when the mount was configured to force specific uid/gid values. Fix all three call sites to check CIFS_MOUNT_OVERR_UID and CIFS_MOUNT_OVERR_GID before calling sid_to_id(), following the same pattern already used by cifs_unix_basic_to_fattr() for unix extensions. | ||||
| CVE-2026-97558 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix cifsFileInfo reference leak in deferred close When cifs_close() defers a close, it hands the cifsFileInfo reference of the closing struct file to the queued work. Each execution of smb2_deferred_work_close() drops one such reference. deferred_close_scheduled can be false while the work is pending: the workqueue clears PENDING when the callback starts to run, before the callback clears the flag under deferred_lock. A close in that interval requeues the running work, and the callback then clears the flag, leaving the requeued work pending with the flag down. A later cifs_open() can reuse the handle and its cifs_close() reaches the same branch: queue_delayed_work() fails because the work is still pending, but cifs_close() returns without dropping the closing file's reference. The cifsFileInfo count stays pinned and its tlink, dentry and server handle are leaked. Check the return value and hand off the reference only when work was actually queued. Otherwise, use the shared _cifsFileInfo_put(), like the mod_delayed_work() branch above: the pending execution already owns its reference. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-97554 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: avoid using uninitialized SIDs in cifs_posix_to_fattr() cifs_posix_to_fattr() ignores the return value of posix_info_parse(). When a malformed POSIX directory entry is encountered (e.g. invalid SID lengths from an untrusted server), posix_info_parse() returns -1 without populating the 'parsed' struct. The uninitialized stack memory in parsed.owner and parsed.group is then passed to sid_to_id(), which processes the garbage bytes and passes them to request_key() to construct a SID string, potentially leaking kernel stack contents to the userspace idmap daemon. Fix this by checking the return value and skipping the SID-to-id mapping when parsing fails. The remaining fattr fields (timestamps, mode, etc.) are populated directly from the 'info' pointer so they are unaffected. | ||||
| CVE-2026-94254 | 2026-10-15 | 5.3 Medium | ||
| The SellKit WordPress plugin before 2.8.0 does not validate a client-supplied product price when totals are recalculated during checkout, allowing unauthenticated attackers to place orders for any purchasable product at a price of their own choosing. | ||||
| CVE-2026-93282 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix maximum allowed access checks The DACL permission check looks for an ACE matching the current user and falls back to the Everyone ACE. It does not consider an Authenticated Users ACE, even though an authenticated session is a member of that well-known group. As a result, opening a file whose access is granted through S-1-5-11 can incorrectly fail with STATUS_ACCESS_DENIED. Treat an Authenticated Users ACE as a fallback entry alongside Everyone. The maximal access calculation also combines access masks from every ACE, regardless of whether its SID applies to the current user. This can grant rights belonging to an unrelated principal. Process only ACEs applying to the user, Everyone, or Authenticated Users, and accumulate allowed and denied masks in ACL order. Preserve explicitly requested access bits so they are validated against the resulting maximal mask. When ACCESS_SYSTEM_SECURITY is denied, report STATUS_PRIVILEGE_NOT_HELD instead of the generic STATUS_ACCESS_DENIED. Access to the system ACL requires a security privilege that ksmbd does not grant. For regular files, include FILE_EXECUTE in maximal access when the client requested GENERIC_EXECUTE and the DACL grants the complete file-read set. Keep a direct FILE_EXECUTE request subject to the explicit DACL bit. This matches the POSIX file ACL mapping without broadening specific execute requests. Do not replace rights from an applicable NT ACE with a POSIX ACL entry. The POSIX ACL is only a fallback when no user, Everyone, or Authenticated Users ACE applies; otherwise it can incorrectly broaden the stored DACL. This fixes smb2.maximum_allowed.maximum_allowed. | ||||
| CVE-2026-93272 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: qcom_wcnss: Fix handling the lack of PD regulators in v3 The changes introduced to handle single power domain platforms have swapped the info pointer increment from num_pd_vregs to num_pds, which would shift the info pointer past the end of the array for pronto-v3, which does not list power domain regulators in vregs. This showed up as a difference between GCC- and LLVM-compiled kernels on SDM632 devices, where only with LLVM one would get the "regulator request with no identifier" error, because the out-of-bounds memory ended up being zeroed. Fix by skipping the increment when there are more power domains than regulators. | ||||
| CVE-2026-93260 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/xive: propagate IPI init errors to prevent use-after-free When xive_init_ipis() fails (e.g. irq_domain_alloc_irqs() fails), the error path frees the global xive_ipis array. However, xive_smp_probe() previously ignored this failure and proceeded to call xive_setup_cpu_ipi(), which dereferences the already-freed xive_ipis pointer -- a use-after-free. Now that xive_smp_probe() returns int (previous patch), propagate the error from xive_init_ipis() and xive_setup_cpu_ipi() through xive_smp_probe(). Check the return value in both pnv_smp_probe() and pSeries_smp_probe() so that IPI setup is aborted cleanly on failure, avoiding the use-after-free. | ||||
| CVE-2026-93255 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: make sure EXTENT_BUFFER_READING is cleared under refs_lock [FALSE ALERTS] There is a bug report that the warning inside invalidate_and_check_btree_folios() got triggered during btrfs/298: BTRFS info (device sdd): first mount of filesystem f9bf732a-a19b-44b9-99a7-614ddff168e2 BTRFS info (device sdd): using crc32c checksum algorithm BTRFS error (device sdd): failed to find fsid cb2fdb42-b638-4f2f-badd-4127467ba674 when attempting to open seed devices BTRFS error (device sdd): failed to read chunk tree: -2 ------------[ cut here ]------------ WARNING: disk-io.c:3342 at invalidate_and_check_btree_folios+0x260/0x3c0 [btrfs], CPU#4: mount/125993 CPU: 4 UID: 0 PID: 125993 Comm: mount Tainted: G W OE 7.1.0-rc7-custom+ #1 PREEMPT(full) Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20250812-19.fc42 08/12/2025 Call trace: invalidate_and_check_btree_folios+0x260/0x3c0 [btrfs] (P) open_ctree+0x1f50/0x23b0 [btrfs] btrfs_get_tree+0x89c/0xc48 [btrfs] vfs_get_tree+0x30/0x110 vfs_cmd_create+0x58/0xe8 __arm64_sys_fsconfig+0x39c/0x518 invoke_syscall.constprop.0+0x48/0x120 el0_svc_common.constprop.0+0x40/0xe8 do_el0_svc+0x24/0x38 el0_svc+0x50/0x310 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x198/0x1a0 ---[ end trace 0000000000000000 ]--- BTRFS warning (device sdd): unable to release extent buffer 365985792 owner 3 gen 17 refs 3 flags 0x5 [CAUSE] In that invalidate_and_check_btree_folios() we wait for the eb to finish its read, then check if it's only held by us and the btree inode. If not, then do a warning as it may be still held, and could cause problems. But there is a small window where the check can lead to false alerts: Thread A (Read endio) | Thread B (Unmount) ----------------------------------+------------------------------------- end_bbio_meta_read() | | The eb has one extra ref held | | by the reader, and has | | EXTENT_BUFFER_READING flag set | invalidate_and_check_btree_folios() | | | |- clear_extent_buffer_reading() | | | | |- wait_on_bit_io(); | | | The EXTENT_BUFFER_READING flag is | | | cleared | | |- if (refcount_read(eb->refs) > 2) | | The eb is held by the read, us | | and btree inode, thus it | | will trigger the warning |- free_extent_buffer() | [FIX] Introduce a helper, free_extent_buffer_clear_reading(). If the new parameter, @clear_reading, is set, we will hold the spinlock at the beginning of free_extent_buffer_clear_reading() to make sure the EXTENT_BUFFER_READING flag is cleared inside the same critical section of decreasing refs. Now free_extent_buffer() will just call free_extent_buffer_clear_reading() with @clear_reading set to false, so no behavior change. But for end_bbio_meta_read(), it will not clear_extent_buffer_reading() directly, but pass @clear_reading as true. Then inside invalidate_and_check_btree_folios(), hold the refs_lock before reading refs. So that we eliminate the race window completely. | ||||
| CVE-2026-93251 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: bus: Introduce acpi_bus_get_primary_device() The function used for obtaining the first "physical" device for which the given ACPI one is the ACPI companion, acpi_get_first_physical_node(), may return a stale device pointer (mostly in theory) because acpi_unbind_one() may run as a whole after dropping the ACPI device's physical_node_lock in acpi_get_first_physical_node() and before it returns. The last reference to the "physical" device may be dropped then before the pointer to it is returned to the caller. If that happens and the acpi_get_first_physical_node() caller invokes get_device() on the pointer obtained from it, which is done by the majority of its callers, a use-after-free will occur. To prepare for addressing this problem, introduce a new function for getting the first "physical" device associated with the given ACPI one (the "primary physical device") that will also reference count the device in question before returning a pointer to it. Make that new function and acpi_get_first_physical_node() share the physical node list lookup code. No intentional functional impact. | ||||
| CVE-2026-93248 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: don't WARN on kernel job timeout when device already wedged igt@xe_wedged@wedged-at-any-timeout wedges the device in mode 2 (UPON_ANY_HANG_NO_RESET) and then rebinds the driver. During unbind, a GSC proxy kernel submission can still time out; with the device wedged and the GuC CT stopped it can never complete, so its kernel job times out. Tile0: GT1: Kernel-submitted job timed out WARNING: drivers/gpu/drm/xe/xe_guc_submit.c:... at guc_exec_queue_timedout_job() Workqueue: gt-ordered-wq drm_sched_job_timedout Killed queues skip guc_submit_hint_wedged(), leaving 'wedged' false even though the device is already wedged. The timeout handler then treats the kernel queue timeout as unexpected and taints the kernel. Honour an already-wedged device even for killed queues so the expected teardown timeout no longer trips the WARN. (cherry picked from commit a1c1dbd0f047bb05de6aaf6abe9103031179bf19) | ||||
| CVE-2026-93243 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/secretmem: properly account locked pages secretmem accounts folios by treating memory as if it were mlock()'d and thus limited by the RLIMIT_MEMLOCK limit. However the folios are unevictable and remain so until the inode is evicted, eliminating usual mlock() semantics - mapping folios then unmapping them does not clear their unevictable state, since it depends on AS_UNEVICTABLE, not PG_mlocked. A user can therefore easily work around the RLIMIT_MEMLOCK limit - simply map then unmap and VmLck no longer counts the secretmem range. Worse, folios are not accounted in the process's RSS, meaning the OOM killer won't know to kill the process. Repeatedly mapping/unmapping (or forking) can then result in the consumption of all available system memory with unevictable folios and cause system instability. A secretmem fd can be passed between processes and over fork so a per-process limit simply does not make sense, so follow the precedent set by io_uring, perf, skbuff, iommufd and xdp by tracking the number of locked pages in user_struct->locked_vm. Since the scope tracked is actually inode lifetime, the RLIMIT_MEMLOCK applies per-user not per-process, so it doesn't make sense to bypass for users with CAP_IPC_LOCK, therefore remove this bypass. There is simply no reason to carry on marking the mapping as mlock()'d since it's misleading and the lifecycle is now correctly handled, so remove this too. Note that secretmem does not support any form of truncation (including hole punching) and the folios are unreclaimable, so the folios need only be accounted on fault and unaccounted on inode destruction. __secretmem_account_pages() is more or less a duplicate of the code that io_uring etc. use, but since this is a bug fix that needs backporting, defer any de-duplication efforts to a follow-up. test_mlock_limit() asserts mlock_future_ok() on mmap(), however this has been removed, so remove the test altogether for the fix. A new test will be sent separately for upstream. | ||||
| CVE-2026-93221 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: convert nfsd_net boolean flags to unsigned long flags word nfsd_net contains several boolean fields that are accessed from concurrent contexts without serialization. In particular, nfsd4_end_grace() guards its drain path with a plain bool: if (nn->grace_ended) return; nn->grace_ended = true; The read and the write are independent, and nothing in struct nfsd_net serializes them. At least two contexts can reach this code with no lock held: laundromat path laundry_wq kworker nfs4_laundromat() nfsd4_end_grace() RECLAIM_COMPLETE path nfsd compound kthread nfsd4_reclaim_complete() inc_reclaim_complete() nfsd4_end_grace() Both callers can observe grace_ended == false on different CPUs, both store true, and both proceed into nfsd4_record_grace_done(), which invokes the active client_tracking_ops->grace_done callback. For tracking ops that drain reclaim_str_hashtbl (legacy_tracking_ops via nfsd4_recdir_purge_old, and the cld v1+ ops via nfsd4_cld_grace_done), grace_done calls nfs4_release_reclaim(), which walks every bucket of reclaim_str_hashtbl with no lock and calls nfs4_remove_reclaim_record() (list_del + kfree) on each entry. Two concurrent walkers corrupt the list and double-free every nfs4_client_reclaim. A concurrent nfsd4_find_reclaim_client() iterating the same bucket reads through freed memory. A third call site exists in nfs4_state_start_net() on the skip_grace startup path, but it runs under nfsd_mutex before any client has connected and before the laundromat's first delayed work fires, so it cannot race with the two callers above. Replace the scattered boolean fields in nfsd_net with a single unsigned long flags word and an enum nfsd_net_flag for the bit positions. The grace_ended race is fixed by using test_and_set_bit(), which is atomic on all architectures. The remaining flags (grace_end_forced, in_grace, somebody_reclaimed, track_reclaim_completes, nfsd_net_up, lockd_up) are converted to use test_bit/set_bit/clear_bit for consistency. This avoids sub-word cmpxchg issues on architectures like Hexagon that only support word-sized atomic operations. | ||||
| CVE-2026-93201 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm-pcache: validate seg_id fields from persistent memory cache_pos_decode(), cache_key_decode() and the last-kset branches of cache_replay(), the writeback worker and the GC worker take a cache segment id from the cache device metadata and index cache->segments[] with it without checking it against cache->n_segs. That metadata is only CRC-protected with a fixed public seed, so whoever supplies the cache device on a table load (CAP_SYS_ADMIN) controls the id; an out-of-range value forms a wild pcache_cache_segment pointer that is dereferenced and written through -- an out-of-bounds read and write driven by on-disk data. Add cache_seg_id_valid() and reject an out-of-range id at each decode site, failing the operation with -EIO instead of indexing past the array. Bound the id against the initialized-segment count (cache_info.n_segs) rather than the physical device total. A forged cache_info.n_segs below seg_num otherwise leaves segments[cache_info.n_segs..seg_num) as zeroed structs whose data pointer is NULL, so a forged id in that window would still be dereferenced. A later patch guarantees cache_info.n_segs <= seg_num, and a driver-created cache sets the two equal, so valid images are unaffected. | ||||
| CVE-2026-93179 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/powerplay: fix VoltageObjectInfo zero-stride loop and OOB read Reject voltage objects whose usSize is smaller than the header or would advance the cursor past the table end, preventing an infinite loop or heap OOB read when the VBIOS supplies a malformed VoltageObjectInfo table. | ||||
| CVE-2026-93176 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix dangling pointer in plane reset function amdgpu_dm_plane_drm_plane_reset() frees the old state before allocating a new one. If kzalloc() fails, the function returns without updating the state pointer, leaving a dangling pointer to already freed memory. Fix this by allocating the new state first. On allocation failure, the old state remains untouched and the function safely returns. Found by Linux Verification Center (linuxtesting.org) with SVACE. [adjust for movement around current amd-staging-drm-next] | ||||