Export limit exceeded: 413883 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 413883 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (413883 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98822 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: prevent AP VLAN tx from other interfaces Since the station lookup was factored out of ieee80211_build_hdr(), ieee80211_lookup_ra_sta() uses sta_info_get_bss() for all AP and AP VLAN frames, not only for control port frames. A unicast frame sent on one interface thus matches a station of a different VLAN of the same BSS and is transmitted to it. Only match stations of the interface the frame is sent on, except for control port frames, since those may be sent for VLAN stations directly on the BSS interface. | ||||
| CVE-2026-98819 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: validate DDC record lengths Parse DDC record lengths in unsigned storage so 0xFF does not wrap. Reject records smaller than the mandatory three-byte header, records exceeding U8_MAX, and records exceeding remaining firmware bytes before issuing Intel_Write_DDC. This issue was reported by Claude Mythos. | ||||
| CVE-2026-98812 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/mctp: publish the mctp_dev only after it is initialised mctp_add_dev() links the new mctp_dev into dev->mctp_ptr before mdev->dev is assigned, so a reader that picks the device up in that window dereferences a net_device pointer that is still NULL: KASAN: null-ptr-deref in range [0x00000000000000b0-0x00000000000000b7] Call Trace: <TASK> ? __pfx_mctp_sendmsg (./include/linux/sockptr.h:49) ? __pfx_mctp_dst_output (net/mctp/route.c:41) ? selinux_socket_sendmsg (security/selinux/hooks.c:5278) ____sys_sendmsg (net/socket.c:775 (discriminator 1) net/socket.c:790 (discriminator 1) net/socket.c:2684 (discriminator 1)) ? __pfx_____sys_sendmsg (net/socket.c:1131) ? __pfx_copy_msghdr_from_user (net/socket.c:2590) ? update_cfs_rq_load_avg (kernel/sched/fair.c:5478) ___sys_sendmsg (net/socket.c:2738) ? __pfx____sys_sendmsg (net/socket.c:2625) ? perf_event_task_tick (./include/linux/rcupdate.h:838) ? sched_tick (kernel/sched/core.c:5818) ? clockevents_program_event (kernel/time/clockevents.c:372) ? fdget (./include/linux/rcupdate.h:873 fs/file.c:1100) __sys_sendmsg (net/socket.c:2770) ? __pfx___sys_sendmsg (net/socket.c:2751) do_syscall_64 (arch/x86/entry/syscall_64.c:63) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) </TASK> Fix by publishing only once the object is fully initialised: __mctp_dev_get() runs under rcu_read_lock() only and hands this object to readers as soon as mctp_ptr is assigned, so they must never observe mdev->dev == NULL. | ||||
| CVE-2026-98811 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: reclaim an empty proto on the error path Two racing tc filter add requests on the same chain/prio of an unlocked classifier both run change() on the shared proto and both can fail: the winner's tcf_chain_tp_delete_empty() attempt gives up because the loser's handle is still in the idr, and the loser's error path drops only its own reference without a second reclamation attempt. The empty proto stays linked in the chain, holding the chain reference, a block reference and the classifier module reference until the chain or block is torn down. Reclaim the proto on the error path of any failed request that holds a proto reference. The reclamation is emptiness-gated: tcf_chain_tp_delete_empty() unlinks the proto only when delete_empty() admits it is empty, so a live shared proto is never unlinked. A proto the request created is reclaimed unconditionally - it is the only owner, so marking it for deletion is safe even without a delete_empty callback. Classifiers without one (the check marks the proto unconditionally) are rtnl-serialized, so the raced window this guard closes cannot arise for them. This is a follow-up to commit d4e359b3608a ("net/sched: cls_api: fix teardown of an adopted proto on insert-race loss"), which stopped the loser of the insert race from unlinking the winner's live proto but left the empty-proto residual in place. Conditions to recreate: - CONFIG_NET_CLS_FLOWER=y; veth pair - tc qdisc add dev veth0 ingress - two concurrent `tc filter add dev veth0 ingress protocol ip pref 1 flower skip_sw ... action drop` (both fail in fl_hw_replace_filter after publishing their handle in the idr); repeat in a loop - an empty flower tp stays linked after both requests fail; visible as a bare `filter protocol ip pref 1 flower chain 0` header in `tc filter show` with no filter entries - CAP_NET_ADMIN (namespace-local via unshare -Urn suffices) | ||||
| CVE-2026-98809 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: don't drain cmd_sync backlog on unregister hci_unregister_dev() disables cmd_work and cmd_timer, then calls hci_cmd_sync_clear(), whose cancel_work_sync() waits for hci_cmd_sync_work() to return. That worker dequeues and runs every entry on cmd_sync_work_list. With cmd_work disabled nothing reaches the controller, so each queued HCI command waits the full HCI_CMD_TIMEOUT (2s). The backlog has no bound. Userspace can keep queuing MGMT commands such as MGMT_OP_GET_CLOCK_INFO against a controller that doesn't answer. Closing /dev/vhci then blocks in vhci_release() for backlog * 2s: INFO: task syz-executor:5749 blocked for more than 143 seconds. cancel_work_sync hci_cmd_sync_clear hci_unregister_dev vhci_release In a local reproduction the backlog held more than 5000 entries, which comes to hours of hang. Stop the worker from taking new entries once HCI_UNREGISTER is set, and wake any request still waiting with -ENODEV before cancelling the work. The entries left over are destroyed with -ECANCELED by the existing sweep in hci_cmd_sync_clear(). They stay on the list until the work has stopped, so hci_cmd_sync_dequeue() and friends still see them. A callback already running may still issue another command, which delays unregister by at most one timeout per remaining command, not by the whole backlog. | ||||
| CVE-2026-98808 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: systemport: Fix buffer overflow in bcm_sysport_get_stats() When running on SYSTEMPORT Lite, certain statistics are unsupported and skipped during bcm_sysport_get_stats(). The variable 'j' tracks the compacted index into the destination data buffer, whereas 'i' iterates over all elements in bcm_sysport_gstrings_stats. Because the buffer allocated by ethtool is sized only according to bcm_sysport_get_sset_count(), storing values at data[i] instead of data[j] writes past the allocated array bounds, leading to memory corruption. Fix this by writing to data[j] instead of data[i]. | ||||
| CVE-2026-98805 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tipc: prevent GCM nonce reuse on peer key changes TIPC can encrypt traffic between nodes using a different transmit key for each node. In this mode, the AES-GCM nonce for a packet sent to a known peer consists of a 32-bit prefix (a per-key salt XOR the peer's address) followed by a 64-bit counter. That counter is stored in the peer's RX crypto object. When the peer reports a change in which key it uses to receive packets, TIPC resets this counter. The sender can still be using the same TX key and salt, so subsequent packets reuse earlier nonces. This nonce reuse breaks confidentiality and exposes GCM's authentication key. This makes forgeries trivial: an attacker can exploit CTR malleability to alter captured ciphertexts and use the recovered authentication key to compute a valid tag for the modified ciphertext, under the same key and nonce. Use the TX key's existing aead->seqno counter instead. All encryptions using that key object share the same atomic counter, so concurrent encryptions get distinct nonce counter values. The counter survives key activation and peer reconnection, and peer key-status reports cannot reset it. This prevents those transitions from causing nonce reuse while the same TX key remains installed. The nonce format is unchanged, and receivers do not require consecutive counter values, so sharing the counter across peers remains compatible with existing receivers. A pre-existing check still invokes key revocation in the unlikely event that the counter wraps to zero. | ||||
| CVE-2026-98798 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: fix NULL dereference in set_coalesce before first open The Rx ring priv and index are only set in bcmgenet_init_rx_ring(), which runs at open. Setting the Rx coalescing parameters on an interface that was never opened, e.g. "ethtool -C eth0 rx-usecs 50", dereferences a NULL ring->priv. The oops happens with RTNL held, so networking stays stuck until a reboot: Unable to handle kernel paging request at virtual address 0000000000002788 pc : bcmgenet_set_rx_coalesce.isra.0+0x10/0x88 lr : bcmgenet_set_coalesce+0xe8/0x180 Call trace: bcmgenet_set_rx_coalesce.isra.0+0x10/0x88 (P) __ethnl_set_coalesce.isra.0+0x490/0x570 ethnl_set_coalesce+0x48/0xc0 ethnl_default_set_doit+0xf4/0x230 genl_family_rcv_msg_doit+0xe8/0x160 genl_rcv_msg+0x220/0x2a0 netlink_rcv_skb+0x68/0x140 genl_rcv+0x40/0x60 netlink_unicast+0x338/0x3c0 netlink_sendmsg+0x19c/0x3f8 __sock_sendmsg+0x64/0xc0 __sys_sendto+0x124/0x198 __arm64_sys_sendto+0x30/0x48 Set priv and index at probe. Writing the registers while the interface is down is harmless because open resets the MAC and bcmgenet_init_rx_coalesce() reapplies the stored values. It was observed on a Raspberry Pi CM4, but should apply to all other genet devices. | ||||
| CVE-2026-98796 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: allocate dummy netdev sooner The RX rings and the shared NAPI are carried by an internal "dummy" netdev (eth->dummy_dev). mtk_probe() creates that dummy device, and adds the shared tx/rx NAPI to it, only after the MAC netdevs have been registered. That order has been there since the MT7623 support was added and leaves a window in which the netdevs are visible to the network core before the shared NAPI and the dummy device exist. If anything brings the first netdev up during that window (e.g. netifd opening the WAN link the instant the interface is registered), the first-open path runs without them. On NETSYS v2 and later SoCs mtk_rx_alloc() -> __xdp_rxq_info_reg() then dereferences eth->dummy_dev == NULL: WARNING: CPU: ... Missing net_device from driver in net/core/xdp.c and mtk_open() fails with -ENODEV. On NETSYS v1 SoCs (MT7621/MT7622/MT7623/MT7629) there is no page pool, so the same open instead calls napi_enable() on a napi_struct that netif_napi_add() has not initialised yet and dereferences a NULL napi->dev. Allocate the dummy netdev and add the shared tx/rx NAPI to it before the register_netdev() loop. Both the dummy-allocation failure and a register_netdev() failure now unwind through mtk_unreg_dev(), which unregisters the net_device notifiers and the netdevs registered so far, stopping a concurrently-opened netdev (ndo_stop) and its NAPI before the dummy carrier is freed. A netdev that opened during the window can also have queued the frame-engine reset worker (via the tx watchdog or phylink), so the probe error path now cancels eth->pending_work before freeing the shared state, as mtk_cleanup() already does on remove. | ||||
| CVE-2026-98794 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: filter some flags received in the backup server While the IPVS SYNC protocol is not secure by design we can still protect the backup server from messages that can wreak havoc. This commit addresses problems from received connection flags or their combinations. We now drop messages as follows: 1. the NO_CPORT+TEMPLATE combination allows lookups for normal connections to hit template which can break in many ways. While the master does not sync connections with NO_CPORT flag, i.e. before they are established, we still accept NO_CPORT without TEMPLATE. 2. ONE_PACKET: it is not sent by master, so we do not expect it in backup. Before now it was ignored by IP_VS_CONN_F_BACKUP_MASK for protocol v1 while protocol v0 created connections that are not hashed and dropped immediately. Better to apply the IP_VS_CONN_F_BACKUP_MASK also to the flags from v0 messages for consistency with v1. | ||||
| CVE-2026-98793 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: bpf: reject invalid NAT manipulation types As bpf_ct_set_nat_info() is not validating the NAT manipulation type a wrong value can be passed directly to nf_nat_setup_info(). This triggers the WARN_ON() at nf_nat_setup_info() and if panic_on_warn isn't set, then IPS_SRC_NAT_DONE is set without adding nat_bysource and conntrack cleanup tries to unlink an uninitialized hlist node. Fix this by checking that NAT manipulation type is correct before calling nf_nat_setup_info(). In addition, if the WARN_ON is hit, return NF_DROP instead of continuing with the processing to avoid similar situations in the future. | ||||
| CVE-2026-98792 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: generalize pending status bit Rename NF_FLOW_HW_PENDING to NF_FLOW_PENDING and use it to inhibit the flowtable GC worker until pending hw offload work has been completed. Apparently, nf_flow_offload_stats() can schedule work to retrieve stats while the flow is being removed by GC. And this bit can also be used in a follow up patch to disable GC until the flow has been fully added in both directions. Revert the reordering done in commit d644b23afe1e ("netfilter: flowtable: publish HW_DEAD after worker is done") to prevent a race between GC and hw offload handler. | ||||
| CVE-2026-98790 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: perf: Fix race between perf_event_exit_task() and perf_pending_task() A race condition exists between perf_event_exit_task() and perf_pending_task() during begin_new_exec(). During begin_new_exec(), perf_event_exit_task() may be called, and the PF_EXITING flag is not set on task. So perf_sigtrap() continues to execute and triggers WARN_ON_ONCE(event->ctx->task != current). Since both task exit and exec paths can call perf_event_exit_task() which sets ctx->task to TASK_TOMBSTONE, fix this by explicitly checking if event->ctx->task equals TASK_TOMBSTONE and dropping the redundant PF_EXITING check. | ||||
| CVE-2026-98768 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: anx7411 - stop the IRQ before destroying the workqueue The IRQ is devm-managed, so it can still queue plat->work while remove() is tearing the queue down. Disable it first. | ||||
| CVE-2026-98750 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: fix saved termios reset race Resetting saved termios state on device registration is needed where a minor number can be reused for an entirely different device and where the old settings may prevent the port from even being opened (e.g. when CLOCAL is not set). Not all TTY drivers guarantee that the minor number is no longer in use when registering devices however, something which can lead to a use-after-free when closing a TTY (and saving its termios) races with re-registration. Add a new TTY_DRIVER_RESET_SAVED_TERMIOS flag to request that any saved termios state is reset on registration and only set it for drivers that make sure that the minor number is no longer in use. | ||||
| CVE-2026-98749 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: max3100: shut down timer before freeing port max3100_shutdown() stops the polling timer but returns early during system suspend. If the SPI device is unbound before resume, the serial core does not call max3100_shutdown() again, so max3100_remove() frees the port while the timer remains armed. max3100_timeout() may then access the freed port and re-arm the timer. Add final timer teardown to max3100_remove() and use timer_shutdown_sync() to prevent a racing callback from re-arming it. Also free the IRQ and destroy the workqueue there before freeing the port. Keep timer_delete_sync() in max3100_shutdown() so that a subsequent open() can re-arm the timer. The workqueue is created before request_irq() and destroyed on both request_irq() failure and normal shutdown. Its presence at remove thus identifies the IRQ left registered when suspend bypasses shutdown. Free the IRQ before destroying the workqueue, in both max3100_shutdown() and max3100_remove(), and cancel the pending work in between. free_irq() waits for a running interrupt handler to finish and no new handler can start afterwards, so a racing handler cannot queue work on a workqueue that is being destroyed; the force_end_work check in max3100_dowork() only narrows that window, as a handler delayed between the check and queue_work() could still run after the teardown has cleared the workqueue pointer. Cancelling the work also keeps destroy_workqueue() from waiting on a queued work item in case remove() ever runs while the freezable workqueue is still frozen, e.g. device removal during the resume window, before workqueues are thawed. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-98748 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250_bcm7271: fix use-after-free in brcmuart_remove() brcmuart_handle_irq() starts priv->hrt to work around a receive-timeout quirk of the 8250 core when hardware flow control is enabled; the timer callback brcmuart_hrtimer_func() dereferences priv. brcmuart_remove() cancels the hrtimer before it unregisters the port, so a receive-timeout interrupt that arrives in between re-arms the timer. After devm frees priv, the callback runs on freed memory. Unregister the port before cancelling the hrtimer. serial8250_unregister_port() shuts the port down and frees its IRQ, so brcmuart_handle_irq() can no longer restart the timer, and the final hrtimer_cancel() drains any timer that was armed before or during the unregister. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-98742 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Serialize compat port-info ioctls The native sequencer ioctl path serializes handler calls with client->ioctl_mutex, but the translated port-info compat path invokes the same handlers through snd_seq_kernel_client_ctl() without taking that mutex. This lets concurrent compat CREATE_PORT requests pass the port-count check before any request reaches the serialized insertion. The computed integer port index can then exceed the address field range and wrap to an existing index. Subsequent subscriber teardown can resolve the duplicate address to the wrong port and access a freed subscriber. Take ioctl_mutex while dispatching converted port-info requests, matching the native ioctl path. All translated port-info commands share this helper, so their accesses to the client port state are serialized as well. | ||||
| CVE-2026-98738 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Serialize SMP remote OOB data access build_pairing_cmd() looks up remote OOB data and copies its contents without holding hdev->lock, which serializes the list's writers. After SMP finds an entry, a concurrent management Remove Remote OOB Data command can unlink and free it before SMP reads its present flag or copies its random and confirmation values. Removal can also invalidate an entry while the lookup is still traversing the list. KASAN reported: BUG: KASAN: slab-use-after-free in build_pairing_cmd+0x948/0x9b0 Call Trace: build_pairing_cmd+0x948/0x9b0 smp_recv_cb+0x459f/0x8110 l2cap_recv_frame+0xf14/0x9190 l2cap_recv_acldata+0xa64/0xd40 hci_rx_work+0x4ca/0x730 Allocated by task 87: hci_add_remote_oob_data+0x11d/0x530 add_remote_oob_data+0x282/0x400 hci_sock_sendmsg+0x1033/0x1ea0 Freed by task 93: hci_remote_oob_data_clear+0x108/0x1c0 remove_remote_oob_data+0x198/0x220 hci_sock_sendmsg+0x1033/0x1ea0 Taking hdev->lock in build_pairing_cmd() would recurse for callers that already hold it and invert the device-to-L2CAP lock order on the receive path. Add a per-device remote_oob_lock instead, held across the SMP lookup and copies and by the add, remove and clear helpers. Cover initialization and in-place updates as well, so SMP cannot read partially initialized or updated OOB values. Release the mutex on allocation failure, preserving the existing error return. The new critical sections acquire no device, connection or channel locks. Writers retain their existing hdev->lock protection, which continues to serialize the other readers without changing their locking or behavior. | ||||
| CVE-2026-98737 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Fix inquiry cache use-after-free The sync command worker holds hdev->req_lock, but inquiry-cache updates and flushes use hdev->lock. Both hci_acl_create_conn_sync() and hci_stop_discovery_sync() look up entries and read their fields without taking hdev->lock. After either lookup returns, a concurrent HCIINQUIRY ioctl can acquire hdev->lock and flush the cache, freeing the entry. The worker then reads the freed entry while preparing a create-connection or remote-name-cancel command. The list traversal also races with cache updates and removal. KASAN reported these accesses: BUG: KASAN: slab-use-after-free in hci_acl_create_conn_sync+0x5f1/0x650 Workqueue: hci0 hci_cmd_sync_work Call Trace: hci_acl_create_conn_sync+0x5f1/0x650 hci_cmd_sync_work+0x13c/0x290 Allocated by task 90: hci_inquiry_cache_update+0x3e6/0x7d0 hci_inquiry_result_evt+0x3cb/0x560 Freed by task 93: hci_inquiry_cache_flush+0x111/0x2b0 hci_inquiry+0x2f2/0x780 hci_sock_ioctl+0x269/0x5f0 BUG: KASAN: slab-use-after-free in hci_stop_discovery_sync+0x3b1/0x3c0 Workqueue: hci0 hci_cmd_sync_work Call Trace: hci_stop_discovery_sync+0x3b1/0x3c0 hci_cmd_sync_work+0x173/0x300 Allocated by task 86: hci_inquiry_cache_update+0x483/0x940 hci_inquiry_result_evt+0x3cb/0x560 Freed by task 91: hci_inquiry_cache_flush+0x13e/0x2f0 hci_inquiry+0x2f2/0x780 hci_sock_ioctl+0x269/0x5f0 Hold hdev->lock across each lookup and all reads from its result. Copy the remote address before unlocking so discovery cancellation does not retain a cache entry pointer. Release the lock before sending synchronous HCI commands, since their completion handlers may need the same lock. | ||||