Export limit exceeded: 25800 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25800 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97968 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (corsair-cpro) Create debugfs entries after hwmon registration ccp_debugfs_init() registers debugfs files whose private data is the devm allocated ccp. It runs before hwmon_device_register_with_info(), so when that registration fails, ccp_probe() returns with the files still in place. The HID core then frees ccp, and ccp_remove() is not called for a failed probe, so nothing removes them later either. Reading one of the files dereferences the freed pointer. Create the debugfs entries only after the hwmon device has been registered, so no failing path can leave them behind. The two version queries stay where they are. They send USB commands without holding ccp->mutex, which is only safe as long as nothing else can call send_usb_cmd(); once the hwmon device is registered its callbacks can do so concurrently. Only the debugfs creation moves, and it is told which queries succeeded. | ||||
| CVE-2026-97992 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vhost-vdpa: protect config_ctx from being freed under the config callback vhost_vdpa_config_cb() loads v->config_ctx and signals it without taking a reference and without holding any lock: struct eventfd_ctx *config_ctx = v->config_ctx; if (config_ctx) eventfd_signal(config_ctx); VHOST_VDPA_SET_CONFIG_CALL replaces that field and drops what is normally the last reference to the old context: swap(ctx, v->config_ctx); if (ctx) eventfd_ctx_put(ctx); eventfd_ctx_put() drops the last kref and frees the context immediately, with no RCU grace period, so a callback that has already loaded the pointer goes on to dereference freed memory. The two sides share no lock: the ioctl runs under vhost_dev.mutex, while the parent invokes the callback from its own interrupt or workqueue context. This is not the reopen refcount underflow fixed by commit f6bbf0010ba0 ("vhost-vdpa: fix use-after-free of v->config_ctx"), which was about vhost_vdpa_config_put() leaving a stale pointer behind. Here the pointer is maintained correctly and it is the read side that is unprotected. With VDUSE as the parent this is reachable from userspace with access to /dev/vduse (root by default). VDUSE_DEV_INJECT_CONFIG_IRQ queues dev->inject, and vduse_dev_irq_inject() runs the callback under VDUSE's own dev->irq_lock, which vhost does not hold. vduse_dev_reset() does flush_work(&dev->inject), but VHOST_VDPA_SET_CONFIG_CALL never goes through reset, so an inject already in flight is not waited for. A process that injects config interrupts on the VDUSE fd while another thread swaps the call fd on the vhost-vdpa fd hits it in seconds: BUG: KASAN: slab-use-after-free in native_queued_spin_lock_slowpath Read of size 4 at addr ffff888107d21808 by task kworker/u17:1/2993 Workqueue: vduse-irq vduse_dev_irq_inject Call Trace: native_queued_spin_lock_slowpath+0x97/0x5b0 _raw_spin_lock_irqsave+0xd4/0xe0 eventfd_signal_mask+0x69/0x120 vhost_vdpa_config_cb+0x34/0x50 vduse_dev_irq_inject+0x46/0x60 process_one_work+0x468/0x950 Allocated by task 2992: do_eventfd+0x50/0x200 __x64_sys_eventfd2+0x2e/0x40 Freed by task 2992: eventfd_ctx_put+0xb9/0xc0 vhost_vdpa_unlocked_ioctl+0x116c/0x2190 Add a spinlock covering every access to config_ctx, so the callback either signals a context that is still alive or observes NULL, and the put happens only once no callback can reach the old value. Clearing the parent's callback before the put would not be enough: of the in-tree set_config_cb() implementations only VDUSE takes a lock, the rest store the pointer unlocked, so that would not order against an in-flight invocation. | ||||
| CVE-2026-100073 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix transaction overflow during writeback Commit 95ad8ee45cdb ("ext4: correct the reserved credits for extent conversion") was correct to note that we need to reserve enough credits for all extents possibly underlying a large folio. However it was too eager to reduce the number of reserved credits. Extent conversion may not only need to touch several leaf extent blocks, it may also need to split extents - for example a single large unwritten extent may need to be split into many small written ones in case of sparse folio dirtying. This can thus result not only in extent leaf modifications but also in a need to allocate new extent tree nodes. As a result the reserved transaction credits were not sufficient in some corner cases. Use ext4_meta_trans_blocks() for correct upper bound credit estimate. | ||||
| CVE-2026-97996 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: virtio: fix use-after-free in unregister_virtio_device() device_unregister() is device_del() plus put_device(). When the caller holds no extra reference, that drops the last one and runs the release callback, which for several transports frees the memory the embedded struct virtio_device sits in. unregister_virtio_device() then calls virtio_debug_device_exit(), which reads dev->debugfs_dir out of the freed object. Affected transports are the ones whose release callback frees and whose remove path takes no reference: virtio_mmio, virtio_vdpa, virtio_uml, mlxbf-tmfifo and virtio_ccw. virtio_pci is unaffected because virtio_pci_remove() brackets the call with get_device() and put_device(). Remove the debugfs entries before the device can go away. They are only accessed through the protected debugfs interface, so debugfs_remove_recursive() waits for in-progress file operations before returning. Tearing them down while the device is still alive is therefore safe. Reproduced on User-Mode Linux with CONFIG_KASAN and CONFIG_VIRTIO_DEBUG by unbinding a virtio-uml device: BUG: KASAN: slab-use-after-free in virtio_debug_device_exit+0x36/0x4d Read of size 8 at addr 00000000616e0b10 by task init/1 __asan_report_load8_noabort virtio_debug_device_exit+0x36/0x4d unregister_virtio_device+0x48/0x75 virtio_uml_remove platform_remove device_release_driver_internal unbind_store Freed by task 1: kfree virtio_uml_release_dev device_release kobject_put put_device device_unregister With this applied, the report is gone and unbind is clean. | ||||
| CVE-2026-98045 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mark faultable stack helpers as sleepable The faultable variants of bpf_get_stack() and bpf_get_task_stack() pass may_fault=true into the common stack collection code. Resolving user-space build IDs may then call build_id_parse_file() and block on filesystem reads. Neither helper prototype sets might_sleep. Since prototype selection uses the sleepability of the whole program, the verifier can still allow these helpers from a non-sleepable region within that program, such as an explicit RCU or preemption-disabled region. The task-stack helper can also be called from a non-sleepable timer callback of a sleepable program. Mark both faultable prototypes as sleepable. The existing helper context check then rejects these calls while continuing to allow them in genuinely sleepable contexts. | ||||
| CVE-2026-98000 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: Fix potential UAF in pec_store Sashiko reports: In pec_store(), a guard(mutex)(&hwdev->lock) is taken. If the chip write operation returns an error other than -EOPNOTSUPP, the code jumps to the put label, which calls put_device(hdev). If this drops the final reference, the device is freed. When the function then returns, the guard cleanup function runs and attempts to unlock the freed mutex. Use scoped_guard() instead of guard() to avoid the problem. | ||||
| CVE-2026-98002 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix ineffective error check in nested domain allocation amd_iommu_pdom_id_alloc() returns an int: a domain ID on success, or the negative errno from ida_alloc_range() when the ID space is exhausted or memory is short. amd_iommu_alloc_domain_nested() stores that return value in gdom_info->hdom_id, which is a u32, and only then tests it: gdom_info->hdom_id = amd_iommu_pdom_id_alloc(); if (gdom_info->hdom_id <= 0) { The assignment discards the sign, so -ENOSPC becomes 0xffffffe4 and the test never fires. The nested domain is then set up with a host domain ID that was never allocated, instead of the allocation failing with -ENOSPC. Keep the value in an int, test it there, and store it only once it is known to be valid, which is what the other amd_iommu_pdom_id_alloc() callers already do. | ||||
| CVE-2026-98003 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Do not reallocate GA log buffers on resume Commit c5e1a1eb9279 ("iommu/amd: Simplify and Consolidate Virtual APIC (AVIC) Enablement") moved the GA log allocation from iommu_init_pci() to enable_iommus_vapic(), which is called on every resume. iommu_init_ga_log() assigns iommu->ga_log and iommu->ga_log_tail unconditionally. Each resume therefore replaces the boot-time pointers and leaks both old allocations. The function also uses GFP_KERNEL from a syscore resume callback, where interrupts are disabled and the non-boot CPUs are offline. Return early if both buffers are already allocated. Clear the pointers in free_ga_log() so a partial allocation failure cannot leave ga_log dangling. | ||||
| CVE-2026-98005 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: erofs: delimit inode_share cache key components Previously, inode_share keys were encoded as follows: fingerprint || domain_id It would be better to have a separator between the fingerprint and domain ID so that the fingerprint won't be parsed as part of a domain ID. Change the key encoding as follows: domain_id || '\0' || fingerprint Since domain_id is a NUL-terminated string, this makes the in-memory key indices unambiguous. | ||||
| CVE-2026-98018 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: mctp: i3c: serialize probe with bus removal mctp_i3c_probe() drops busdevs_lock after finding the matching bus. A concurrent I3C_NOTIFY_BUS_REMOVE can then unregister and free the bus netdev before probe passes its private data to mctp_i3c_add_device(). The latter consequently adds a list node through a freed mbus pointer. Keep busdevs_lock held until the device has been added. This also satisfies the __must_hold annotation on mctp_i3c_add_device(). | ||||
| CVE-2026-98001 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (ltc4282) Make sure clk_init_data is fully initialized The clk_init_data structure contains several mutually-exclusive members for different methods to specify the possible parents of a clock, prompting drivers to initialize only the members they need. However, not initializing all members may cause subtle issues, which are only exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is enabled. ltc428_clk_provider_setup() does not fill in any parent clocks, and assumes that init.num_parents is NULL. However, the latter in uninitialized, and thus may cause a crash. Make sure all members are fully initialized, to fix such bugs, and to avoid future breakage when converting drivers to a different method for specifying the parents. | ||||
| CVE-2026-98035 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Cancel special fields when recycling rhtab elements rhtab_map_update_existing() and rhtab_delete_elem() call bpf_obj_free_fields() when replacing or deleting a value. These map operations can run from BPF programs in NMI context, where releasing a referenced kptr or another complex field is not generally safe. Array and hash maps avoid that problem by cancelling only the asynchronous fields which can be stopped safely in the caller context. Other ownership state remains attached to the allocation until its memory allocator destructor performs the final cleanup. Use bpf_obj_cancel_fields() for the corresponding rhtab paths as well. This cancels timers, workqueues, and task work while allowing rhtab_mem_dtor() to release referenced kptrs when the allocation is eventually destroyed. [ kkd: Rebased, used direct helper calls, and rewrote the commit log ] | ||||
| CVE-2026-100070 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_nat_sip: rewind offset when NAT shrinks the packet sashiko says: If map_addr() changes the packet length, such as when the public NAT IP string is shorter or longer than the internal IP, coff will still point to the offset relative to the pre-mangled packet. If the packet shrinks, coff could overshoot the correct position, potentially causing the next ct_sip_parse_header_uri() call to silently skip bytes and miss subsequent Contact headers. Could this lead to a failure to NAT those subsequent headers and leak internal network details? | ||||
| CVE-2026-98047 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Check ancestor frames for rbtree callbacks bpf_rbtree_add() invokes its comparator while the caller holds the root lock. The native insertion code retains raw parent and link pointers across the callback, so the verifier prohibits unlocking, consuming tree nodes, or changing RCU state from that callback. in_rbtree_lock_required_cb() only checks the innermost verifier frame. Static subprogram calls are permitted while holding a spin lock, and such a call pushes a frame without in_callback_fn set. Consequently, all callback restrictions disappear in the nested frame. The subprogram can unlock the tree, remove and drop the node being compared, then relock. Native insertion resumes with the stale parent pointer and links freed memory into the tree. Walk all active frames for the rbtree callback instead. Benign static subprograms remain permitted, while callback restrictions follow execution into nested frames. | ||||
| CVE-2026-98146 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Remove __counted_by from struct amdxdna_cmd_chain struct amdxdna_cmd_chain contains a flexible array annotated with __counted_by(command_count). Since the structure is stored in shared AMDXDNA_BO_SHARE memory, userspace can modify command_count concurrently. If command_count is changed to zero, the bounds check generated from __counted_by may fail and trigger a kernel panic. Remove __counted_by to avoid relying on the userspace-controlled command_count for the flexible array bounds check. | ||||
| CVE-2026-98028 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: eth: nfp: drop the replaced rule from the list when reprogramming fails nfp_net_fs_add() replaces an existing rule by deleting it from the hardware, decrementing nn->fs.count and programming the new one. If nfp_net_fs_add_hw() fails the old entry stays on nn->fs.list - only the success path reaches list_replace() - so the list is one longer than nn->fs.count, and it advertises a rule whose hardware entry has already been torn down. nn->fs.count is what ETHTOOL_GRXCLSRLCNT reports, so userspace then sizes its buffer one entry short of what the GRXCLSRLALL walk wants to write. That used to overwrite one u32 past the allocation; since the walk is bounded it is a permanent -EMSGSIZE instead, as nothing ever resyncs the counter. | ||||
| CVE-2026-98036 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve special fields in recycled rhtab elements rhtab_map_update_elem() initializes special fields after obtaining an element from bpf_mem_cache_alloc(). The allocator can return a fresh, zeroed unit, or recycle one from its RCU-pending lists before the registered destructor has run. A BPF program can retain a map-value pointer after deleting its element and initialize and arm a timer through that pointer. If the deleted unit is recycled, check_and_init_map_value() clears the only pointer to the timer. Neither a later deletion nor rhtab_mem_dtor() can then cancel it, and the callback can run with its key and value pointing into freed memory. Do not reinitialize special fields on insertion. Fresh allocator units are already zeroed. For recycled units, the special fields are ownership state that must remain visible to the eventual destructor. copy_map_value() already skips those fields, matching the non-preallocated hash-map path and the lifecycle established by commit 275c30bcee66 ("bpf: Don't reinit map value in prealloc_lru_pop"). [ kkd: Split out the fix and rewrote the commit log ] | ||||
| CVE-2026-98041 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Don't predict JMP32 pointer vs zero comparisons Consider the following program: r1 = map_value; /* low 32 bits are zero at runtime */ r6 = 0xdead000000000000; if w1 != 0 goto l1; l0: r1 += r6; r2 = *(u64 *)(r1 + 0); exit; l1: r6 = 0; goto l0; At the moment is_branch_taken() reports the jump as always taken, because it does not distinguish between BPF_JMP and BPF_JMP32 comparisons when processing 'if w1 != 0 ...'. | ||||
| CVE-2026-98061 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject tail calls directly from callback frames A tail call from a non-zero frame is modeled as a return from that frame. The verifier makes R0 unknown and calls prepare_func_exit() for the taken branch. When the current frame is a synchronous callback, prepare_func_exit() enforces the callback return-value contract and marks R0 precise. Since the tail-call path synthesized R0 rather than deriving it from an instruction, precision backtracking reaches the callback-calling instruction with R0 still requested and triggers the "callback unexpected regs" verifier bug. A CAP_BPF task can therefore cause a WARN and an -EFAULT BPF_PROG_LOAD. Tail calls reachable from callbacks are already rejected later by check_max_stack_depth(). Reject a tail call made directly by a callback before constructing the inconsistent return state, using the existing diagnostic. Tail calls from ordinary subprograms keep their current behavior. | ||||
| CVE-2026-98141 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: propagate reparse index insertion failure update_reparse_data() ignores the return value of set_reparse_index(). When index insertion fails, the code removes the just-written reparse data as cleanup but still returns 0, so symlink(2) (and WSL special file creation) reports success while no reparse data exists on disk. When there was no previous reparse data (oldsize == 0), the failure was likewise silently ignored. Propagate the error to the caller. | ||||