Export limit exceeded: 408065 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 17236 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (17236 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98207 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: spi: reset bytes_xfered before retrying CRC failures mmc_spi_data_do() updates data->bytes_xfered after each block has been transferred successfully. If a later block in the same data request fails with a CRC error, data->bytes_xfered may therefore contain the number of bytes completed before the failing block. mmc_spi_request() has a private recovery path for such CRC failures. It sends STOP_TRANSMISSION, clears data->error and jumps back to crc_recover to issue the same command and data request again. However, it does not clear data->bytes_xfered before the retry. If the retry succeeds, the request is completed with the bytes from the failed attempt still included in data->bytes_xfered. For a multi-block request this can make the completed request report more bytes than were transferred by the successful retry, and can even exceed the request size when most blocks completed before the CRC error. This is most likely to be observed on MMC-over-SPI systems where long multi-block transfers occasionally hit a data CRC error but the mmc_spi-internal retry succeeds. The data itself is retried, but the completion accounting is not. Clear data->bytes_xfered together with data->error before repeating the request so the final completion reports only the bytes transferred by the successful attempt. | ||||
| CVE-2026-98201 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: zero ff_effect before compat copy in input_ff_effect_from_user In the compat path input_ff_effect_from_user() aliases the caller's native struct ff_effect with the smaller struct ff_effect_compat and copies only the compat sized prefix: compat_effect = (struct ff_effect_compat *)effect; if (copy_from_user(compat_effect, buffer, sizeof(struct ff_effect_compat))) The tail of the native structure is never written. Callers pass an uninitialized on-stack object, for example evdev_do_ioctl() for EVIOCSFF, so those bytes keep their previous stack contents. input_ff_upload() then stores the full native structure in ff->effects[id], from where a uinput based force feedback daemon can read it back via UI_BEGIN_FF_UPLOAD, disclosing kernel stack memory to userspace. Zero the effect before the compat copy. | ||||
| CVE-2026-105404 | 1 Imagemagick | 1 Imagemagick | 2026-10-09 | 5.3 Medium |
| This CVE ID has been rejected as a duplicate. | ||||
| CVE-2026-96890 | 1 Github | 1 Enterprise Server | 2026-10-09 | 8.8 High |
| A Server-Side Request Forgery (SSRF) vulnerability was identified in GitHub Enterprise Server that allowed a repository contributor to cause the appliance to issue requests to attacker-controlled internal hosts, which could be chained to achieve remote code execution on the appliance. The secret scanning validator for GCP service account credentials trusted the token endpoint embedded in a committed credential and issued a request to it without restricting the destination. Exploitation required an authenticated user with permission to push to a repository on an instance with GitHub Advanced Security and secret scanning validity checks enabled, a non-default configuration. This vulnerability affected GitHub Enterprise Server 3.20, 3.21, and 3.22 and was fixed in versions 3.20.9, 3.21.7, and 3.22.2. This vulnerability was reported through the GitHub Bug Bounty program. | ||||
| CVE-2026-107781 | 1 Dromara | 1 Skyeye | 2026-10-09 | 7.4 High |
| Dromara Skyeye through commit 003549ae5615bd114ba5bb8ddf6a8e8ead97c321 contains a server-side request forgery and missing authorization vulnerability in the OnlyOffice save callback editUploadOfficeFileById. Unauthenticated attackers can supply arbitrary url and key parameters to make the server fetch internal URLs and overwrite any user's stored file, then read results via queryFileToShowById. | ||||
| CVE-2026-107700 | 1 Ntharim | 1 Dot-access | 2026-10-09 | 9.8 Critical |
| dot-access 0.0.3 through 1.0.0 contains a code injection vulnerability that allows remote attackers to execute JavaScript by supplying crafted paths to get(). The path is concatenated into a new Function body in index.js, so attackers can reach constructor.constructor to load child_process and run operating system commands in the Node.js process. | ||||
| CVE-2025-60201 | 2 Aguilatechnologies, Wordpress | 2 Wp Customer Area, Wordpress | 2026-10-09 | 7.5 High |
| Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in aguilatechnologies WP Customer Area customer-area allows PHP Local File Inclusion. This issue affects WP Customer Area: before 8.3.4. | ||||
| CVE-2025-1978 | 1 Hitachi | 59 E1090, E1090h, E390 and 56 more | 2026-10-09 | 8.3 High |
| Remote Code Execution Vulnerability in Hitachi Storage Navigator and the maintenance console in Hitachi Virtual Storage Platform G130, G150, G350, G370, G700, G900, F350, F370, F700, F900, Hitachi Virtual Storage Platform E390, E590, E790, E990, E1090, E390H, E590H, E790H, E1090H, Hitachi Virtual Storage Platform One Block 23, One Block 24, One Block 26, One Block 28. This issue affects Virtual Storage Platform G130, G150, G350, G370, G700, G900, F350, F370, F700, F900, Hitachi Virtual Storage Platform E390, E590, E790, E990, E1090, E390H, E590H, E790H, E1090H, Hitachi Virtual Storage Platform One Block 23, One Block 24, One Block 26, One Block 28 : before DKCMAIN Ver. 88-08-16-xx/00, SVP Ver. 88-08-18-xx/00, before DKCMAIN Ver. 93-07-26-xx/00, SVP Ver. 93-07-26-xx/00, before DKCMAIN Ver. A3-04-02-xx/00, MPC Ver. A3-04-02-xx/00, before DKCMAIN Ver. A3-03-41-xx/00, MPC Ver. A3-03-41-xx/00, before DKCMAIN Ver. A3-03-03-xx/00, MPC Ver. A3-03-03-xx/00. | ||||
| CVE-2026-86345 | 1 Redhat | 3 Directory Server, Enterprise Linux, Redhat Directory Server | 2026-10-09 | 9 Critical |
| A flaw was found in 389-ds-base. The server does not discard plaintext bytes already buffered from a client connection when negotiating StartTLS, allowing an on-path attacker to inject a crafted LDAP message that is processed after the TLS upgrade and whose response is delivered to the client in place of the client's own pending operation's response, due to messageID collision. This can cause a client application to treat a failed authentication (bind) attempt as successful. | ||||
| CVE-2026-105301 | 1 Redhat | 4 Build Keycloak, Build Of Keycloak, Red Hat Single Sign On and 1 more | 2026-10-09 | 4 Medium |
| A flaw was found in the X.509 client-certificate authenticator of Keycloak, a solution for identity and access management. The issue occurs when the server is configured to check certificate revocation using CRL Distribution Points or OCSP. An attacker can provide a specially crafted certificate that points to a malicious server, causing Keycloak to make unauthorized outbound requests to internal or external endpoints before the certificate is fully validated. This can lead to a blind server-side request forgery (SSRF) attack. | ||||
| CVE-2026-105796 | 1 Microsoft | 3 Kiota, Microsoft.openapi.kiota, Microsoft.openapi.kiota.builder | 2026-10-09 | 8.8 High |
| Kiota is an OpenAPI based HTTP Client code generator. From 0.5.0 until 1.35.0, Kiota's Java and PHP documentation-comment sanitizers delete block-comment terminators rather than neutralizing them, allowing overlapping characters to reform a terminator and place attacker-controlled OpenAPI text outside a generated documentation comment. The Java sanitizer also removes non-ASCII characters after deleting terminators, which can create a new terminator during normalization. Exploitation requires a developer or build pipeline to generate source from the malicious description and then compile and load the Java output or load the PHP output, after which injected code executes in the consuming application or build environment context. The version range is based on the Java defect and does not assert that PHP generation existed in every affected release. This issue is fixed in version 1.35.0. | ||||
| CVE-2026-105799 | 1 Langchain-ai | 2 Langchainjs, Redis | 2026-10-09 | N/A |
| LangChain is a framework for building LLM-powered applications. Prior to 1.1.1, @langchain/redis does not escape attacker-controlled values in structured RediSearch TAG filters and structured RediSearch TEXT filters, allowing injected RediSearch syntax to alter or broaden the generated search query. When an application uses an attacker-influenceable filter as a tenant or document-access boundary, the modified query can expose indexed documents outside the attacker's intended scope. This issue is fixed in version 1.1.1. | ||||
| CVE-2026-105801 | 1 Openapi-generators | 1 Openapi-python-client | 2026-10-09 | N/A |
| openapi-python-client generates Python clients from OpenAPI documents. Prior to 0.29.1, the generator does not safely neutralize malicious OpenAPI document content before rendering string, docstring, and f-string contexts in generated Python. The generated Python client can contain attacker-controlled Python that executes when a user imports the client, affecting the importing environment's integrity and potentially its confidentiality and availability. This issue is fixed in version 0.29.1. | ||||
| CVE-2026-106119 | 1 Langchain-ai | 2 Langchainjs, Mongodb | 2026-10-09 | N/A |
| LangChain is a framework for building LLM-powered applications. Prior to 1.3.1, MongoDBChatMessageHistory does not enforce the documented string type for an untrusted structured session identifier at runtime, allowing the identifier to be interpreted as a MongoDB query condition rather than as a literal value when multiple users' histories are stored in a shared MongoDB collection. An attacker able to invoke chat-history operations can read, modify, or delete another user's stored conversation. Applications using authenticated, server-controlled string identifiers are not affected. This issue is fixed in version 1.3.1. | ||||
| CVE-2026-106441 | 1 Hydra-ecosystem | 1 Hydra | 2026-10-09 | 7.8 High |
| Hydra is a framework for elegantly configuring complex applications. Prior to 1.3.6 and 1.4.0.dev9, Hydra passes Python logging configuration to logging.config.dictConfig() without applying Hydra's target policy to handler class values or formatter, filter, handler, queue, and listener factories. An attacker who controls Hydra logging configuration can therefore select an importable class or factory and cause it to be invoked with the application's privileges, even in versions where instantiate() is protected because the logging path does not use instantiate(). This issue is fixed in versions 1.3.6 and 1.4.0.dev9. | ||||
| CVE-2026-106498 | 1 Backstage | 2 Backstage, Plugin-catalog-backend | 2026-10-09 | 7.7 High |
| Backstage is an open framework for building developer portals. Prior to 3.5.1, 3.6.2, 3.7.2, 3.8.2 and 3.9.1, the @backstage/plugin-catalog-backend package is affected by improper url validation in catalog entity placeholder resolution. An authenticated Backstage user could craft a catalog entity with placeholder directives that reference resources outside the entity's source repository. Under certain configurations, this could allow access to data not intended to be available to the user. This issue is fixed in versions 3.5.1, 3.6.2, 3.7.2, 3.8.2 and 3.9.1. | ||||
| CVE-2026-104677 | 1 Wordpress-extensions | 1 Wp Coder | 2026-10-09 | 7.2 High |
| The WP Coder WordPress plugin before 4.5.2 does not restrict access to its PHP code-execution feature to administrators, gating it on a content capability that the Editor role holds by default, which allows Editor-level users to save and execute arbitrary PHP code on the server and fully compromise the site. | ||||
| CVE-2026-97354 | 1 Wordpress-extensions | 1 Powerpress | 2026-10-09 | 4.1 Medium |
| The PowerPress Podcasting plugin by Blubrry WordPress plugin before 11.17.11 does not validate the destination of redirects when fetching a user-supplied media URL, allowing users with the contributor role and above to perform Server-Side Request Forgery attacks against internal services. | ||||
| CVE-2026-90461 | 1 Openstack | 1 Ironic | 2026-10-09 | 6.3 Medium |
| OpenStack Ironic through 38.0.0 may send a username and password to an unexpected remote host when Image Service is configured for HTTP(S) Basic Authentication. | ||||
| CVE-2026-96408 | 1 Six Apart | 4 Movable Type, Movable Type Cloud Edition, Movable Type Premium and 1 more | 2026-10-09 | N/A |
| A code injection vulnerability exists in the upgrade script of Movable Type, which may allow an unauthenticated attacker to execute an arbitrary Perl script or an SQL query on the affected product. | ||||