Export limit exceeded: 53550 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (53550 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97578 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: verisilicon: rockchip: guard VPU981 AV1 divisor and tile buffer rockchip_vpu981_av1_dec_set_tile_info() divides context_update_tile_id by tile_info->tile_cols and writes one descriptor per tile into the tile_info DMA buffer, which holds AV1_MAX_TILES entries; tile_cols and tile_rows come from the bitstream. Guard the division against a zero tile_cols by initialising the context-update values to zero and computing them only when tile_cols is non-zero, and stop the descriptor writes once the tile_info buffer is full. The tile geometry written to the hardware registers is left unmodified; the per-dimension and total tile bounds are enforced by the control validation. | ||||
| CVE-2026-97577 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: verisilicon: rockchip: reject AV1 frames exceeding the tile capacity rockchip_vpu981_av1_dec_set_tile_info() indexes the tile group entry array by tile1 * tile_cols + tile0, reading up to tile_cols * tile_rows entries, lays out one descriptor per tile in the AV1_MAX_TILES tile_info buffer, and programs the real tile_cols / tile_rows into the hardware. The tile group entry control is a dynamic array sized to the number of entries userspace submitted, independent of tile_cols / tile_rows, so a frame that claims more tiles than entries reads past the array. A frame that claims more than AV1_MAX_TILES tiles also leaves the hardware programmed for more tiles than the descriptor buffer holds. Reject both in prepare_run(): tile_cols * tile_rows must not exceed the submitted entry count or AV1_MAX_TILES. The entry count is read via v4l2_ctrl_find() (ctrl->elems). This mirrors the bound the mediatek AV1 decoder already enforces. | ||||
| CVE-2026-97576 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-ctrls: validate HEVC tile counts The stateless HEVC decoders read num_tile_columns_minus1 + 1 entries from column_width_minus1[] and num_tile_rows_minus1 + 1 from row_height_minus1[] and use them as tile-loop bounds, but std_validate_compound() does not bound these u8 counts. Reject a V4L2_CTRL_TYPE_HEVC_PPS with tiling enabled whose tile counts exceed the uAPI array capacity, mirroring the existing compound-control range checks. | ||||
| CVE-2026-97575 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-ctrls: validate AV1 tile counts The stateless AV1 decoders use tile_info.tile_cols and tile_rows as loop bounds and as indices into the mi_*_starts[] and *_in_sbs_minus_1[] arrays, as the divisor for context_update_tile_id, and their product bounds the per-tile descriptor buffers, but std_validate_compound() does not bound these u8 fields. Reject a V4L2_CTRL_TYPE_AV1_FRAME whose tile_cols or tile_rows exceeds V4L2_AV1_MAX_TILE_COLS / _ROWS, or whose product exceeds V4L2_AV1_MAX_TILE_COUNT. A zero tile count is left to the consuming driver so the zero-initialised control that existing userspace submits is still accepted. | ||||
| CVE-2026-97560 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix one-byte OOB read in smb2_parse_native_symlink() When parsing a share-root relative native symlink, memcpy copies smb_target+1 (skipping the leading separator) but uses strlen(smb_target)+1 as the length, reading one byte past the allocated buffer. This fixes the following KASAN splat when accessing an SMB symlink with a target of '\a\b': BUG: KASAN: slab-out-of-bounds in smb2_parse_native_symlink+0x4f5/0xca0 Read of size 5 at addr ffff88800878fe21 by task netfsfuzz-execu/1 CPU: 1 UID: 0 PID: 1 Comm: netfsfuzz-execu Tainted: G N 7.2.0-11943-g2709dd5ae32f-dirty #1 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996) Call Trace: <TASK> dump_stack_lvl+0x7b/0xa0 print_report+0xd0/0x630 kasan_report+0xe5/0x120 kasan_check_range+0x105/0x1b0 __asan_memcpy+0x23/0x60 smb2_parse_native_symlink+0x4f5/0xca0 parse_reparse_point+0x68a/0x1530 reparse_info_to_fattr+0x752/0xa20 cifs_get_fattr+0x873/0x15b0 cifs_get_inode_info+0xc0/0x310 cifs_lookup+0x308/0xa70 __lookup_slow+0x122/0x2b0 lookup_slow+0x50/0x70 path_lookupat+0x525/0xaf0 filename_lookup+0x1f2/0x550 vfs_statx+0xd1/0x1a0 vfs_fstatat+0x65/0xc0 __do_sys_newfstatat+0x9a/0x120 do_syscall_64+0xdd/0x4a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2026-97540 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: pegasus: don't rely on id table pointer arithmetic The current code is broken when dynamic ID is involved; in such cases usb_device_id parameter of probe lives on the heap and the pointer arithmetic will get an index that is wildly out of bound. Instead of keeping a side table for additional information, use driver_info field of the usb_device_id. The dynamic ID parsing code needs to be updated for this; convert it to just write to the reserved entry for dynamic ID and remove the weird loop. | ||||
| CVE-2026-97539 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: xusbatm: don't rely on id table pointer arithmetic The current code is broken when dynamic ID is involved; in such cases usb_device_id parameter of probe lives on the heap and the pointer arithmetic will get an index that is wildly out of bound. xusbatm initialize the USB device IDs dynamically so it can just use driver_info too. Even with conversion, xusbatm still cannot support dynamic IDs, so also set no_dynamic_id. | ||||
| CVE-2026-97517 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: reject beacons with bad HE operation The HE operation element not only needs to be longer than the fixed part, but also have an appropriate size for the variable part inside of it. Check this. | ||||
| CVE-2026-97500 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: phy: check length before parsing PHY status IE Hardware might report PHY status IE with unexpected length, and parser might access out of range. Check the length ahead. | ||||
| CVE-2026-97497 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Check bounds for allocate_sdma_queue restore_sdma_id allocate_sdma_queue has an option where the sdma queue id can be specified (used by CRIU). We weren't bounds-checking that value. Confirm it's less than the maximum number of queues. | ||||
| CVE-2026-97496 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix OOB memory exposure in get_wave_state() The get_wave_state() function for v9 trusts cp_hqd_cntl_stack_size and cp_hqd_cntl_stack_offset values read directly from the MQD, which are written by GPU microcode and fully attacker-controlled on the CRIU-restore path (via AMDKFD_IOC_RESTORE_PROCESS with H3). this leads to an unbounded copy_to_user() that can leak adjacent GTT/kernel memory. If offset > size, integer underflow produces a ~4 GiB read length, if size is set to 1 MiB against a 4 KiB allocation, we leak 1 MiB of adjacent kernel memory (other queues' MQDs, ring buffers, KASLR pointers). Fix by clamping both cp_hqd_cntl_stack_size to the actual allocated buffer size (q->ctl_stack_size) and cp_hqd_cntl_stack_offset to the clamped size before performing arithmetic and copy_to_user(). This ensures we never read beyond the allocated kernel BO regardless of attacker-supplied MQD field values. | ||||
| CVE-2026-97495 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Check bounds on allocate_doorbell allocated_doorbell has an option to set the doorbell id to a specific value (used by CRIU). This value was not bounds checked. Check to confirm it's less than KFD_MAX_NUM_OF_QUEUES_PER_PROCESS. | ||||
| CVE-2026-97487 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: jfs: handle set_blocksize failures jfs uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting we will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call. | ||||
| CVE-2026-97485 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: omfs: handle set_blocksize failures omfs uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting we will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call. | ||||
| CVE-2026-97456 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: Fix condition check in acpi_ps_parse_loop() Fix condition check for AML_ELSE_OP in acpi_ps_parse_loop() to prevent out-of-bounds access. | ||||
| CVE-2026-97454 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: add boundary checks in acpi_ps_get_next_field() Add boundary checks in acpi_ps_get_next_field() to prevent out-of-bounds access. | ||||
| CVE-2026-97451 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: Fix integer overflow in acpi_ex_opcode_3A_1T_1R() (mid_op) Add overflow check for Index + Length to prevent integer overflow when calculating the truncation length. This prevents negative size parameter being passed to memcpy(). | ||||
| CVE-2026-97449 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: Add package limit checks in parser functions Add package limit checks in parser functions to prevent out-of-bounds access. | ||||
| CVE-2026-97445 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: Enhance buffer validation in acpi_ut_walk_aml_resources() Enhance buffer validation in acpi_ut_walk_aml_resources() to prevent buffer overflows. | ||||
| CVE-2026-97444 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: add boundary checks in two places Add boundary checks in acpi_ps_get_next_namestring() and acpi_ps_peek_opcode() to prevent out-of-bounds access. | ||||