Export limit exceeded: 28044 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (28044 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90407 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix overreads in ath11k_wmi_process_csa_switch_count_event() There is no policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT, so the parse infrastructure does not enforce a minimum length for the event struct. Additionally, the num_vdevs field is taken directly from firmware and used as a loop bound over the vdev_ids array without checking that it fits within the TLV payload. Either condition can cause an out-of-bounds read. Add a TLV policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT so the parse infrastructure enforces a minimum length for the fixed-size event struct. Add a helper ath11k_wmi_tlv_data_len() to recover the payload length of a parsed TLV from the header preceding its data pointer. Use it in ath11k_wmi_process_csa_switch_count_event() to bound num_vdevs before the loop. Compile tested only. | ||||
| CVE-2026-92525 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Validate num_sge/cur_sge before indexing wqe->dma.sge[] For a user QP, qp->sq.queue is a ring the application writes directly, so rxe_post_send() takes the is_user branch and only schedules send_task without validating the WQE. rxe_requester() consumes it in place via req_next_wqe() and calls copy_data(), which indexes &wqe->dma.sge[cur_sge] with the attacker-controlled num_sge/cur_sge. Only the kernel path bounds num_sge (validate_send_wr()); the user WQE is never checked, so a local unprivileged user can post a WQE with an out-of-range cur_sge or oversized num_sge and force an out-of-bounds read of the per-WQE sge array in copy_data() (vmalloc OOB read, local DoS). Bound num_sge to qp->sq.max_sge in rxe_requester() before use, the way get_srq_wqe() already guards SRQ entries, and bound cur_sge only when the WQE carries payload (dma.resid): copy_data() returns early on a zero-length copy before touching dma->sge[], so a zero-payload WQE -- the only kind a max_sge == 0 QP can post -- stays valid. Reproduced under KASAN; the vmalloc-out-of-bounds in copy_data() is gone. | ||||
| CVE-2026-93079 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cxl/features: Reject Get Feature count larger than the output buffer cxlctl_get_feature() sizes its output buffer from the user's fwctl_rpc.out_len, but the device is told to write cxl_mbox_get_feat_in.count bytes into rpc_out->payload, which is a separate user-controlled value. Nothing bounds count against out_len, so a small out_len with a large count overflows the kvzalloc()'d buffer. A heap OOB write reachable from FWCTL_RPC. Reject requests where count exceeds the available payload room, before allocating. | ||||
| CVE-2026-73462 | 1 Arista | 1 Eos | 2026-09-19 | 6.5 Medium |
| On affected platforms running Arista EOS with IGMP (Internet Group Management Protocol) snooping configured (enabled by default on all VLANs), a network-adjacent unauthenticated attacker can send malformed network packets on an affected VLAN to cause the IGMP snooping agent to terminate unexpectedly. This results in a temporary disruption of multicast traffic management, which may cause multicast traffic to be flooded to all ports of the affected VLAN until the service recovers. Repeated exploitation could result in a prolonged loss of intended multicast forwarding behavior. | ||||
| CVE-2026-81944 | 1 Planet Technology Corp | 2 Planet Igs-5225-8p2t4s V1, Planet Igs-5225-8p2t4s V2 | 2026-09-19 | 7.5 High |
| PLANET IGS-5225-8P2T4S industrial managed switch V1 and V2 firmware versions before 1.2412b260707 and 2.2412b260519 contain a stack-based buffer overflow in the web server. Insufficient bounds checking on data copied into a stack buffer allows a remote authenticated attacker to cause a denial of service or potentially execute arbitrary code on the underlying operating system. | ||||
| CVE-2026-84448 | 1 Struktur | 1 Libheif | 2026-09-19 | 4 Medium |
| libheif is a HEIF and AVIF file format decoder and encoder. Prior to 1.23.2, the public heif_region_item_add_region_inline_mask_data() function in libheif/api/libheif/heif_regions.cc accepts mask_data_len without verifying that it equals the byte count required by width and height. A later heif_region_get_mask_image() call derives the read length from the region geometry, so an undersized stored buffer causes heif_region_get_inline_mask_image() to read beyond the heap allocation and copy adjacent bytes into the returned monochrome mask image. This can disclose heap data or crash an application that constructs region metadata through the writer API, while the file-parsing path is not affected because it validates the canonical mask size. This issue is fixed in version 1.23.2. | ||||
| CVE-2026-93127 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Drop scalar id on sign-extending narrowing stack fills When a spilled scalar is filled back with a sign-extending narrowing load (BPF_MEMSX), check_stack_read_fixed_off() copies the spilled register including its scalar id, but coerce_reg_to_size_sx() then sign-extends the filled register's value. If the same slot is also filled with a plain zero-extending load (BPF_MEM), both destination registers share the id yet hold different values. A later 'if <zext-reg> == const' then refines the sign-extended register through sync_linked_regs() to a value it does not have at runtime (e.g. the verifier believes 0x80000000 while the register is 0xffffffff80000000), which can be turned into an out-of-bounds access. Drop the shared scalar id at the sign-extension site in check_mem_access() when sign extension actually changes the value, mirroring the BPF_MOVSX handling in check_alu_op() (no_sext = reg_umax < 2^(size*8-1)). | ||||
| CVE-2026-11727 | 1 Ibm | 1 Mq For Hpe Nonstop | 2026-09-19 | 8.1 High |
| IBM MQ for HPE NonStop 8.1.0 through 8.1.0.40 IBM MQ C client could allow a remote attacker to cause a denial of service or potentially execute arbitrary code due to improper validation of queue manager responses when requesting AMS policy data. | ||||
| CVE-2026-11726 | 1 Ibm | 1 Mq For Hpe Nonstop | 2026-09-19 | 8.1 High |
| IBM MQ for HPE NonStop 8.1.0 through 8.1.0.40 could allow an authenticated attacker to obtain sensitive information or cause a denial of service due to improper validation of message header offset values. | ||||
| CVE-2026-11716 | 1 Ibm | 1 Mq For Hpe Nonstop | 2026-09-19 | 7.5 High |
| IBM MQ for HPE NonStop 8.1.0 through 8.1.0.40 could allow an authenticated attacker to cause a denial of service or potentially execute arbitrary code during queue manager startup due to improper validation of cluster migration data. | ||||
| CVE-2026-90349 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix out-of-bounds link array access in mt7996_tx() When mac80211 leaves the link unspecified, mt7996_tx() substitutes the primary link id of the station or vif. That value is IEEE80211_LINK_UNSPECIFIED (0xf) until the first link has been added, and it is then used unchecked to index vif->link_conf[], mvif->mt76.link[] and sta->link[], all of which hold IEEE80211_MLD_MAX_NUM_LINKS (15) entries. Clamp the primary link id to the default link before using it, and use the clamped value for the link_sta fallback as well. | ||||
| CVE-2026-90369 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: fix out-of-bounds access in mmio copy helpers mt76_mmio_write_copy() and mt76_mmio_read_copy() iterate up to ALIGN(len, 4), so a length that is not a multiple of four reads past the source buffer (write_copy) or writes past the destination (read_copy). Copy the aligned body in the loop and handle the remaining tail through a 4-byte bounce buffer, keeping the register access width unchanged. | ||||
| CVE-2026-93067 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/bridge: tc358767: clamp the reported AUX read size to the request tc_aux_transfer() clamps an AUX read to the payload limit: size_t size = min_t(size_t, DP_AUX_MAX_PAYLOAD_BYTES - 1, msg->size); After the transfer it replaces size with the byte count the controller reports in AUX_BYTES: if (size) size = FIELD_GET(AUX_BYTES, auxstatus); AUX_BYTES is GENMASK(15, 8), so it can be up to 255. Nothing clamps it back to the request. tc_aux_read_data() reads that many bytes into the 16-byte auxrdata stack buffer, then copies them into the caller buffer. A reported count of 255 makes the read run to 256 bytes and overruns both. The controller should never report more than it was asked to transfer, so this is defense in depth rather than a live hole. The reported count is only lightly trusted, and the check is cheap. Clamp it back to the request, the same way ti-sn65dsi86 does in commit aca58eac52b8 ("drm/bridge: ti-sn65dsi86: Never store more than msg->size bytes in AUX xfer"). | ||||
| CVE-2026-92498 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: avoid buffer overreads in WMI event handlers The following WMI event handlers currently read from the event buffer without first verifying that the message was large enough to hold the expected event: ath6kl_wmi_scan_complete_rx() ath6kl_wmi_addba_req_event_rx() ath6kl_wmi_delba_req_event_rx() Add length checks to prevent overread. | ||||
| CVE-2026-92523 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/nldev: validate dynamic counter attribute length RDMA_NLDEV_ATTR_STAT_HWCOUNTERS is a nested attribute whose children are consumed directly with nla_get_u32(). The top-level policy validates only the container, so it does not establish the fixed shape of each child. Require every child payload to be exactly one u32 before reading it. | ||||
| CVE-2026-93155 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: keembay - Fix AEAD unregister count in error path register_aes_algs() registers the AEAD algorithms before registering the skcipher algorithms. If skcipher registration fails, the function unwinds the earlier AEAD registration with crypto_engine_unregister_aeads(), but it passes ARRAY_SIZE(algs), which is the skcipher table size. Use ARRAY_SIZE(algs_aead) for the AEAD unwind path so the unregister helper iterates over the same table that was registered. Also clarify the nearby comment: the crypto registration helpers clean up algorithms registered within the same call, while this function must still unwind earlier successful registration steps. | ||||
| CVE-2026-93188 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: roccat: bound device-supplied profile index kone_keep_values_up_to_date() and kone_profile_activated() use an 8-bit, device-supplied profile value as an index into the 5-element kone->profiles[] array without a range check. A malicious USB device claiming the Roccat Kone id can send a switch-profile event (or a startup_profile read at probe) with an out-of-range value and make the driver read out of bounds; the result is exposed via the actual_dpi sysfs attribute. Reject out-of-range indices in both paths. This was found with static analysis and confirmed with the KUnit test added in the following patch (KASAN: slab-out-of-bounds). | ||||
| CVE-2026-93119 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: ljca: bound bank_num in ljca_enumerate_gpio() ljca_enumerate_gpio() reads desc->bank_num from the device and loops valid_pin[i] = get_unaligned_le32(...) for i < bank_num. valid_pin[] holds only LJCA_MAX_GPIO_NUM / 32 = 2 entries. Two checks run before the loop. The reply length must match struct_size(desc, bank_desc, bank_num). The product pins_per_bank * bank_num must not exceed LJCA_MAX_GPIO_NUM. Neither one bounds bank_num against the size of valid_pin[]. The reply is capped at LJCA_MAX_PAYLOAD_SIZE (60) bytes, so the struct_size check limits bank_num to 9. A device that reports bank_num 9 with pins_per_bank 7 still passes both checks. gpio_num is 63 and the reply is 56 bytes. The loop then writes nine u32 into the two entry array and overruns valid_pin[] on the stack. A broken or malicious LJCA device can therefore overflow the stack. Reject a bank_num that does not fit valid_pin[]. | ||||
| CVE-2026-93045 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject arena frees below the arena base bpf_arena_free_pages() accepts scalar arena addresses. The runtime masks the address to the low 32 bits and reconstructs a full user address from the arena base before returning the range to the arena free tree. When the scalar value is below the low 32 bits of the arena base, full_uaddr falls below user_vm_start. The existing upper-end clipping then turns this into an out-of-range free-tree offset. A later allocation can reuse that offset and return an address below the arena mapping. Reject such frees before computing the clipped range. | ||||
| CVE-2026-93076 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dax/fsdev: clear vmemmap_shift when binding static pgmap Clear pgmap->vmemmap_shift for static DAX devices. When rebinding a static device from device_dax (which may set vmemmap_shift based on alignment) to fsdev_dax, the stale vmemmap_shift persists on the shared pgmap. Explicitly zero it before devm_memremap_pages() so the vmemmap is built for order-0 folios as fsdev requires. | ||||