Export limit exceeded: 410695 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (410695 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98485 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6t_rt: fix zero-address non-strict match out-of-bounds read rt_mt6_check() permits rules to be configured with rtinfo->addrnr == 0 even when address matching (IP6T_RT_FST_MASK) is requested. In the IP6T_RT_FST_NSTRICT path, rt_mt6() evaluates packet routing addresses against rtinfo->addrs[i] and terminates backwards at the bottom of the loop: if (ipv6_addr_equal(ap, &rtinfo->addrs[i])) { i++; } if (i == rtinfo->addrnr) break; When addrnr is 0, if the first packet address matches rtinfo->addrs[0], i is incremented to 1. Because i is now strictly greater than addrnr (0), the loop termination condition (i == rtinfo->addrnr) is bypassed and will never be satisfied. If a crafted IPv6 packet contains matching routing addresses, i will advance past IP6T_RT_HOPS (16). The subsequent call to ipv6_addr_equal() reads beyond struct ip6t_rt, triggering UBSAN/KASAN out-of-bounds warnings or kernel panics. Fix this by: 1. Rejecting rules in rt_mt6_check() where IP6T_RT_FST_MASK is set but rtinfo->addrnr is zero. 2. In rt_mt6(), moving the termination condition (i < rtinfo->addrnr) into the for-loop header condition and removing the backwards break at the end of the loop body. | ||||
| CVE-2026-98489 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: atl1c: fix soft lockup on out-of-range tpd_cons read The hardware can report an out-of-range tpd_cons (seen as 0xffff) while the PCIe link/MAC is resetting. An out-of-range value can never be reached and the loop below would spin forever. To avoid a soft lockup treat it as "nothing new to clean" instead. Reproduced on two machines, same NIC (Qualcomm Atheros AR8151 v2.0, 4-port), triggered by rebooting a Mikrotik CCR2004 PCIe card that the ports are directly linked to: - Ubuntu 26.04.1 LTS, kernel 7.0.0-31-generic. The link-flap precursor, before the lockup was captured with a full trace elsewhere: atl1c 0000:05:00.0 enp5s0f0: NETDEV WATCHDOG: CPU: 4: transmit queue 2 timed out 489984 ms atl1c 0000:05:00.0: MAC state machine can't be idle since disabled for 10ms second atl1c 0000:05:00.0: atl1c: enp5s0f0 NIC Link is Up<65535 Mbps Full Duplex> 65535 (0xffff) here is the same value tpd_cons reads back once the loop below gets stuck. - Proxmox VE, kernel 7.0.14-11-pve. Same NIC/trigger, this time caught by the soft lockup watchdog with a full stack trace: watchdog: BUG: soft lockup - CPU#12 stuck for 354s! [napi/eth%d-0:329] CPU: 12 UID: 0 PID: 329 Comm: napi/eth%d-0 Tainted: P O L 7.0.14-11-pve #1 PREEMPT(lazy) RIP: 0010:atl1c_clean_tx+0x142/0x2d0 [atl1c] Call Trace: <TASK> __napi_poll+0x32/0x1e0 napi_threaded_poll_loop+0x286/0x2e0 napi_threaded_poll+0xfd/0x140 kthread+0xf7/0x130 ret_from_fork+0x2da/0x3a0 ret_from_fork_asm+0x1a/0x30 </TASK> | ||||
| CVE-2026-98493 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ipconfig: bound DHCP option construction ic_dhcp_init_options() appends the hostname (option 12), vendor-class (option 60) and client-ID (option 61) options into the fixed 312-byte bootp_pkt.exten[] buffer. Only the client-ID branch checked the remaining space; the hostname and vendor-class writes were unbounded. A 64-byte hostname together with the maximum 252-byte dhcpclass= identifier needs 18 + (2 + 64) + (2 + 252) = 338 of the 312 available bytes even before the terminating END marker, so the vendor-class memcpy runs past the end of exten[]. With CONFIG_FORTIFY_SOURCE this is reported as a field-spanning write and, when the kernel is booted with panic_on_warn=1, aborts boot with a panic. Route the optional options through a common helper that makes sure the option, its 2-byte header and the END marker all fit and drops an option that would not. Configurations with short options keep sending exactly the same bytes as before. | ||||
| CVE-2026-96245 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-18 | 7.5 High |
| Out-of-bounds read in Windows Routing and Remote Access Service (RRAS) allows an unauthorized attacker to disclose information over a network. | ||||
| CVE-2026-96521 | 1 Adobe | 1 Photoshop | 2026-10-18 | 7.8 High |
| Photoshop Desktop is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-95859 | 1 Libp2p | 1 Rust-libp2p | 2026-10-18 | N/A |
| libp2p-rust is the official Rust language implementation of the libp2p networking stack. Prior to 0.49.5, Gossipsub GRAFT control-message handling unconditionally adds attacker-supplied topic hashes to connected_peer.topics without confirming that the peer previously subscribed to those topics. A remote unauthenticated peer that can reach a Gossipsub listener can repeatedly send novel GRAFT topics, causing cumulative per-peer memory growth that is not bounded by subscription filters, peer scoring, or per-message size limits. This can exhaust process memory and cause a denial of service. This issue is fixed in version 0.49.5. | ||||
| CVE-2026-98500 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: hid-oxp: use cancel_delayed_work_sync() in remove oxp_hid_remove() uses cancel_delayed_work() for all three delayed work items. cancel_delayed_work() only dequeues a pending work item without waiting for a currently executing callback to finish. If any of the work callbacks (oxp_rgb_queue_fn, oxp_btn_queue_fn, oxp_mcu_init_fn) is running at the time of removal, the callback continues executing concurrently with hid_hw_close() and hid_hw_stop(), accessing the HID device after it has been closed and stopped. Use cancel_delayed_work_sync() instead to ensure that any in-progress work callback completes before device teardown proceeds. | ||||
| CVE-2026-87862 | 1 Curl | 1 Curl | 2026-10-18 | 3.7 Low |
| A flaw was found in curl. When importing HTTP Strict Transport Security (HSTS) cache records, loading a parent domain entry configured to include subdomains before a longer-lived subdomain entry silently drops the subdomain policy. Consequently, once the parent policy expires, curl fails to upgrade subsequent connections for the subdomain to HTTPS and transmits unencrypted requests, allowing a network attacker to intercept sensitive data. | ||||
| CVE-2026-98478 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Keep internal commands dispatchable during error handling Commit 08b12cda6c44 ("scsi: ufs: core: Switch to scsi_get_internal_cmd()") switched UFS internal commands to allocate requests on hba->host->pseudo_sdev->request_queue, which shares the host tagset with regular LUNs. During error recovery, ufshcd_err_handling_prepare() calls blk_mq_quiesce_tagset(&hba->host->tag_set), marking all queues in the tagset as quiesced, including pseudo_sdev->request_queue. When ufshcd_verify_dev_init() subsequently issues internal commands (e.g. NOP OUT UPIU) via blk_execute_rq(), blk_mq_run_hw_queue() skips running the quiesced queue, resulting in an unrecoverable circular wait deadlock. Keep quiescing the tagset and unquiesce the pseudo SCSI device on top of that, so internal commands stay dispatchable while the logical units remain quiesced. Re-quiesce the pseudo device before unquiescing the tagset so that quiesce_depth stays balanced. Clock scaling and ufshcd_pause_command_processing() are unaffected: they keep quiescing the whole tagset, internal commands included. | ||||
| CVE-2026-92263 | 1 Codewithcj | 1 Sparkyfitness | 2026-10-18 | 7.2 High |
| SparkyFitness is a self-hosted, AI-powered health and fitness tracker for families. Prior to 1.6.0, the api/admin/backup/restore endpoint interpolates an uploaded filename into a shell command. An authenticated global administrator uploads a restore archive with a crafted filename. The administrator can supply a restore archive with a filename containing shell metacharacters. Successful exploitation can execute arbitrary operating-system commands with the server process privileges. This issue is fixed in version 1.6.0. | ||||
| CVE-2026-92386 | 1 Curl | 1 Curl | 2026-10-18 | 4.3 Medium |
| A flaw was found in curl. A remote malicious server can trigger a denial of service (DoS) in cookie handling by providing an overly long cookie name and value that exceeds curl's line-length limit when saved to a cookie file. Subsequent curl operations reading from this cookie file silently abort parsing upon encountering the oversized entry, causing all remaining valid cookies in the file to be ignored. | ||||
| CVE-2026-92388 | 1 Curl | 1 Curl | 2026-10-18 | 6.5 Medium |
| A flaw was found in curl. A remote malicious server can cause a Denial of Service (DoS) or memory corruption in applications that enable File Transfer Protocol (FTP) wildcard matching. When a wildcard listing operation fails, curl does not properly reset its internal callback handlers before the connection handle is reused or duplicated. An application that subsequently reuses or clones this corrupted handle may experience an immediate application crash or unsafe memory access. | ||||
| CVE-2026-92389 | 1 Curl | 1 Curl | 2026-10-18 | 3.7 Low |
| A flaw was found in curl. When handling Trivial File Transfer Protocol (TFTP) transfers, a malicious server can trigger information disclosure by responding to a download request in a way that forces the client into transmit mode. Consequently, the client may unintentionally send leftover sensitive data from prior operations on a reused connection handle to the attacker's server. | ||||
| CVE-2026-98436 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Disable device buffer exporting Device buffers are never intended to be exported. Disable exporting support explicitly. | ||||
| CVE-2026-92390 | 1 Curl | 1 Curl | 2026-10-18 | 6.5 Medium |
| A flaw was found in curl. When the command-line tool is executed with the remote header name option to prevent overwriting existing files, a malicious server can bypass this protection by returning an intermediate HTTP 103 (Early Hints) response or through specific header ordering. This flaw allows an attacker controlling a remote server to overwrite existing local files on the client system. | ||||
| CVE-2026-85823 | 1 Microsoft | 11 Windows 11 24h2, Windows 11 24h2, Windows 11 25h2 and 8 more | 2026-10-18 | 7 High |
| Use after free in Windows Composite Image File System allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-92817 | 1 Inductiveautomation | 1 Ignition | 2026-10-18 | 8.8 High |
| The Ignition Perspective module does not properly validate session privileges when determining Designer-level access. An authenticated user with access to a Vision project could provide their valid Vision session identifier and gain Designer-level privileges. An attacker could exploit these elevated privileges to execute arbitrary code in the context of the Ignition Gateway process. | ||||
| CVE-2026-93479 | 1 F5 | 2 Nginx Open Source, Nginx Plus | 2026-10-18 | 8.1 High |
| A vulnerability exists in NGINX Plus and NGINX Open Source when a map directive uses regex matching and the root directive or access log format references the map's regex capture variables before referencing the map output variable. Alternatively, the same result could be achieved by using a non-cacheable variable in a string expression under certain conditions. An unauthenticated attacker along with conditions beyond their control can exploit this vulnerability by sending crafted HTTP requests. This may cause a heap buffer overflow in the NGINX worker process leading to a restart. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR. Impact: This vulnerability may allow remote attackers to cause a denial-of-service (DoS) on the NGINX system or to possibly trigger a code execution. There is no control plane exposure; this is a data plane issue only. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. | ||||
| CVE-2026-93635 | 1 Zimbra | 1 Zimbra Collaboration Suite | 2026-10-18 | 5.3 Medium |
| LDAP filter injection in Zimbra Collaboration Suite 10.1.0 through 10.1.21 allows unauthenticated attackers to alter external LDAP search filters. On domains using search-filter authentication and lazy provisioning, this creates a password oracle for external directory users. Authenticated S/MIME lookups can also return certificates and identity data for unintended directory entries. | ||||
| CVE-2026-93637 | 1 Zimbra | 1 Zimbra Collaboration Suite | 2026-10-18 | 3.7 Low |
| An authentication rate-limit bypass in Zimbra Collaboration Suite 10.1.0 through 10.1.21 allows unauthenticated attackers to make repeated password guesses through GraphQL without incrementing Zimbra’s source-IP failure counter. GraphQL aliases allow multiple authentication attempts in one HTTP request. | ||||