Export limit exceeded: 44887 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (44887 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89467 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: qcom_battmgr: fix use-after-free qcom_battmgr_pdr_notify() queues enable_work when the PMIC GLINK service comes up, and the worker recovers battmgr through container_of() to issue firmware requests. The PMIC GLINK client stays on the client list until its devres release action runs, so a PDR notification can keep queueing the work, and a pending or running worker can access battmgr after devres frees it. Make enable_work device-managed with devm_work_autocancel(), registered before the PMIC GLINK client is allocated. The devres cleanup then releases the client first, so no further notification can queue the work, and cancels the work before battmgr is freed. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-89452 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/msm: Unwind probe state on registration failure msm_iommu_probe() adds its devm-managed IOMMU object to qcom_iommu_devices before adding the IOMMU sysfs device and registering it with the IOMMU core. If iommu_device_sysfs_add() fails, probe returns with the object still on qcom_iommu_devices. The driver core then releases the devm allocation, leaving a dangling list entry that later list walks may dereference. If iommu_device_register() fails, the same dangling list entry remains and the sysfs device is left registered as well. Unwind the sysfs device and global list entry in reverse setup order on the corresponding failure paths. | ||||
| CVE-2026-89445 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix UAF in selftest IOPF reporting IOMMUFD selftest TRIGGER_IOPF borrows an attach handle from group->pasid_array without synchronizing against PASID detach, then a concurrent iommu_report_device_fault() can dereference that borrowed handle's domain pointer after the detach erases the handle and frees the backing struct iommufd_attach_handle. TRIGGER_IOPF then dereferences the freed handle, causing a UAF. Fix by adding a iopf_rwsem in mock_dev to follow the expected design of a real driver. Hold its read side across the whole iommu_report_device_fault() call, and its write side around every path that attaches, detaches, or replaces a device domain. This can block new reports and drains in-flight reports before an old attach handle or the IOPF fault parameter can be removed. Also take the write side while registering a mock device, since it can invoke the mock driver's default-domain attach callback. | ||||
| CVE-2026-74289 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: fib: Don't dump dying fib_info in fib_leaf_notify(). syzbot reported use-after-free in nsim_fib4_prepare_event(). [0] The problem is that the following functions call fib_info_hold() / refcount_inc() while dumping fib_info under RCU, which is unsafe. * mlxsw_sp_router_fib4_event() * rocker_router_fib_event() * nsim_fib4_prepare_event() refcount_inc_not_zero() must be used, but it would be too late there. Let's guarantee the lifetime of fib_info in fib_leaf_notify(). Note that IPv6 does not need the corresponding change since fib6_table_dump() holds fib6_table.tb6_lock. [0]: refcount_t: addition on 0; use-after-free. WARNING: lib/refcount.c:25 at refcount_warn_saturate+0x9f/0x110 lib/refcount.c:25, CPU#0: kworker/u8:15/3420 Modules linked in: CPU: 0 UID: 0 PID: 3420 Comm: kworker/u8:15 Not tainted syzkaller #0 PREEMPT_{RT,(full)} Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026 Workqueue: netns cleanup_net RIP: 0010:refcount_warn_saturate+0x9f/0x110 lib/refcount.c:25 Code: eb 66 85 db 74 3e 83 fb 01 75 4c e8 1b f1 22 fd 48 8d 3d 84 cb f1 0a 67 48 0f b9 3a eb 4a e8 08 f1 22 fd 48 8d 3d 81 cb f1 0a <67> 48 0f b9 3a eb 37 e8 f5 f0 22 fd 48 8d 3d 7e cb f1 0a 67 48 0f RSP: 0018:ffffc9000f2c7270 EFLAGS: 00010293 RAX: ffffffff84a18858 RBX: 0000000000000002 RCX: ffff888032ff9ec0 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff8f9353e0 RBP: 0000000000000000 R08: ffff888032ff9ec0 R09: 0000000000000005 R10: 0000000000000100 R11: 0000000000000004 R12: ffff8880570cc000 R13: dffffc0000000000 R14: ffff88802b40563c R15: ffff8880570cc000 FS: 0000000000000000(0000) GS:ffff888126173000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb1f4d5d000 CR3: 000000006072a000 CR4: 00000000003526f0 Call Trace: <TASK> __refcount_add include/linux/refcount.h:-1 [inline] __refcount_inc include/linux/refcount.h:366 [inline] refcount_inc include/linux/refcount.h:383 [inline] fib_info_hold include/net/ip_fib.h:629 [inline] nsim_fib4_prepare_event drivers/net/netdevsim/fib.c:930 [inline] nsim_fib_event_schedule_work drivers/net/netdevsim/fib.c:1000 [inline] nsim_fib_event_nb+0x1055/0x1240 drivers/net/netdevsim/fib.c:1043 call_fib_notifier+0x45/0x80 net/core/fib_notifier.c:25 call_fib_entry_notifier net/ipv4/fib_trie.c:90 [inline] fib_leaf_notify net/ipv4/fib_trie.c:2176 [inline] fib_table_notify net/ipv4/fib_trie.c:2194 [inline] fib_notify+0x36b/0x5e0 net/ipv4/fib_trie.c:2217 fib_net_dump net/core/fib_notifier.c:70 [inline] register_fib_notifier+0x184/0x360 net/core/fib_notifier.c:108 nsim_fib_create+0x85d/0x9f0 drivers/net/netdevsim/fib.c:1596 nsim_dev_reload_create drivers/net/netdevsim/dev.c:1604 [inline] nsim_dev_reload_up+0x374/0x7c0 drivers/net/netdevsim/dev.c:1058 devlink_reload+0x501/0x8d0 net/devlink/dev.c:475 devlink_pernet_pre_exit+0x1ff/0x420 net/devlink/core.c:558 ops_pre_exit_list net/core/net_namespace.c:161 [inline] ops_undo_list+0x187/0x940 net/core/net_namespace.c:234 cleanup_net+0x56e/0x800 net/core/net_namespace.c:702 process_one_work kernel/workqueue.c:3314 [inline] process_scheduled_works+0xb5d/0x1860 kernel/workqueue.c:3397 worker_thread+0xa53/0xfc0 kernel/workqueue.c:3478 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> | ||||
| CVE-2026-72463 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: Fix dev use-after-free in xfrm async resumption xfrm async resumption hold skb->dev refcnt until after transport_finish. However, xfrm_rcv_cb may modify skb->dev to tunnel dev without taking device reference, such as vti_rcv_cb. The subsequent async resumption will decrement the tunnel device's reference count, which lead to uaf of tunnel dev and refcnt leak of orig dev as below: unregister_netdevice: waiting for vti1 to become free. Usage count = -2 Stash the original skb->dev to fix refcnt imbalance. The new skb->dev set by xfrm_rcv_cb can race with device teardown. Extend rcu protection over xfrm_rcv_cb and transport_finish to prevent races. | ||||
| CVE-2026-53359 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Fix shadow paging use-after-free due to unexpected role Commit 0cb2af2ea66ad ("KVM: x86: Fix shadow paging use-after-free due to unexpected GFN") fixed a shadow paging mismatch between stored and computed GFNs; the bug could be triggered by changing a PDE mapping from outside the guest, and then deleting a memslot. The rmap_remove() call would miss entries created after the PDE change because the GFN of the leaf SPTE does not match the GFN of the struct kvm_mmu_page. A similar hole however remains if the modified PDE points to a non-leaf page. In this case the gfn can be made to match, but the role does not match: the original large 2MB page creates a kvm_mmu_page with direct=1, while the new 4KB needs a kvm_mmu_page with direct=0. However, kvm_mmu_get_child_sp() does not compare the role, and therefore reuses the page. The next step is installing a leaf (4KB) SPTE on the new path which records an rmap entry under the gfn resolved by the walk. But when that child is zapped its parent kvm_mmu_page has direct=1 and kvm_mmu_page_get_gfn() computes the gfn for the 4KB page as sp->gfn + index instead of using sp->shadowed_translation[] (or sp->gfns[] in older kernels). It therefore fails to remove the recorded entry. When the memslot is dropped the shadow page is freed but the rmap entry survives, as in the scenario that was already fixed. Code that later walks that gfn (dirty logging, MMU notifier invalidation, and so on) dereferences an sptep that lies in the freed page, causing the use-after-free. | ||||
| CVE-2026-46242 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: eventpoll: fix ep_remove struct eventpoll / struct file UAF ep_remove() (via ep_remove_file()) cleared file->f_ep under file->f_lock but then kept using @file inside the critical section (is_file_epoll(), hlist_del_rcu() through the head, spin_unlock). A concurrent __fput() taking the eventpoll_release() fastpath in that window observed the transient NULL, skipped eventpoll_release_file() and ran to f_op->release / file_free(). For the epoll-watches-epoll case, f_op->release is ep_eventpoll_release() -> ep_clear_and_put() -> ep_free(), which kfree()s the watched struct eventpoll. Its embedded ->refs hlist_head is exactly where epi->fllink.pprev points, so the subsequent hlist_del_rcu()'s "*pprev = next" scribbles into freed kmalloc-192 memory. In addition, struct file is SLAB_TYPESAFE_BY_RCU, so the slot backing @file could be recycled by alloc_empty_file() -- reinitializing f_lock and f_ep -- while ep_remove() is still nominally inside that lock. The upshot is an attacker-controllable kmem_cache_free() against the wrong slab cache. Pin @file via epi_fget() at the top of ep_remove() and gate the critical section on the pin succeeding. With the pin held @file cannot reach refcount zero, which holds __fput() off and transitively keeps the watched struct eventpoll alive across the hlist_del_rcu() and the f_lock use, closing both UAFs. If the pin fails @file has already reached refcount zero and its __fput() is in flight. Because we bailed before clearing f_ep, that path takes the eventpoll_release() slow path into eventpoll_release_file() and blocks on ep->mtx until the waiter side's ep_clear_and_put() drops it. The bailed epi's share of ep->refcount stays intact, so the trailing ep_refcount_dec_and_test() in ep_clear_and_put() cannot free the eventpoll out from under eventpoll_release_file(); the orphaned epi is then cleaned up there. A successful pin also proves we are not racing eventpoll_release_file() on this epi, so drop the now-redundant re-check of epi->dying under f_lock. The cheap lockless READ_ONCE(epi->dying) fast-path bailout stays. | ||||
| CVE-2024-41045 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Defer work in bpf_timer_cancel_and_free Currently, the same case as previous patch (two timer callbacks trying to cancel each other) can be invoked through bpf_map_update_elem as well, or more precisely, freeing map elements containing timers. Since this relies on hrtimer_cancel as well, it is prone to the same deadlock situation as the previous patch. It would be sufficient to use hrtimer_try_to_cancel to fix this problem, as the timer cannot be enqueued after async_cancel_and_free. Once async_cancel_and_free has been done, the timer must be reinitialized before it can be armed again. The callback running in parallel trying to arm the timer will fail, and freeing bpf_hrtimer without waiting is sufficient (given kfree_rcu), and bpf_timer_cb will return HRTIMER_NORESTART, preventing the timer from being rearmed again. However, there exists a UAF scenario where the callback arms the timer before entering this function, such that if cancellation fails (due to timer callback invoking this routine, or the target timer callback running concurrently). In such a case, if the timer expiration is significantly far in the future, the RCU grace period expiration happening before it will free the bpf_hrtimer state and along with it the struct hrtimer, that is enqueued. Hence, it is clear cancellation needs to occur after async_cancel_and_free, and yet it cannot be done inline due to deadlock issues. We thus modify bpf_timer_cancel_and_free to defer work to the global workqueue, adding a work_struct alongside rcu_head (both used at _different_ points of time, so can share space). Update existing code comments to reflect the new state of affairs. | ||||
| CVE-2026-90448 | 1 Cisagov | 1 Malcolm | 2026-10-02 | 6.5 Medium |
| A deployment mode intended to expose only read access to stored data proxies a set of application programming interface routes without restricting which request methods are allowed. One such route accepts a request that creates or overwrites a stored record, including an attacker-chosen identifier, using the application's own elevated backend credentials. This allows an authenticated user on a deployment intended to be read-only to forge or overwrite stored records that should not be modifiable in that deployment mode. | ||||
| CVE-2026-90450 | 1 Cisagov | 1 Malcolm | 2026-10-02 | 4.3 Medium |
| The application's role-authorization lookup defaults to granting access when a request handler's name is not present in its table of role requirements, rather than defaulting to deny. Any request handler that is not explicitly registered in this table is reachable by any authenticated user regardless of their assigned role, and any newly added handler is fail-open by default until explicitly added to the table. | ||||
| CVE-2026-90454 | 1 Cisagov | 1 Malcolm | 2026-10-02 | 4.3 Medium |
| A deployment mode intended to expose only read access to a bundled packet-analysis component's interface denies a list of write-capable routes by pattern, but the pattern omits routes that modify tags attached to stored session records, and the proxy configuration otherwise permits the request method those routes use. This allows an authenticated user on a deployment intended to be read-only to add or remove tags on stored session records. | ||||
| CVE-2026-100256 | 1 Jetbrains | 1 Intellij Idea | 2026-10-02 | 7.8 High |
| In JetBrains IntelliJ IDEA before 2026.2.3 rCE via Structural Search script constraints was possible in untrusted projects | ||||
| CVE-2026-100259 | 1 Jetbrains | 1 Youtrack | 2026-10-02 | 4.3 Medium |
| In JetBrains YouTrack before 2026.2.18991 improper access control on Gantt chart allowed edits by users with view-only access | ||||
| CVE-2026-63177 | 1 Cisagov | 1 Malcolm | 2026-10-02 | 7.1 High |
| Malcolm is a network traffic analysis tool suite. Prior to version 26.07.0, role-based access control enforced in the Nginx OpenResty Lua layer evaluates the raw, unnormalized `ngx.var.request_uri`, while Nginx itself routes requests using the normalized path. An authenticated low-privilege user can prepend a traversal segment (for example `/x/../upload/...`) so that Nginx routes the request to a restricted backend while the Lua role check fails to match any rule and falls open, granting access it should deny. Version 26.07.0 fixes the issue. | ||||
| CVE-2026-100262 | 1 Jetbrains | 1 Youtrack | 2026-10-02 | 7.6 High |
| In JetBrains YouTrack before 2026.2.18991 missing authorisation allowed users with read-only project access to overwrite project notification templates | ||||
| CVE-2026-104054 | 1 Calcom | 1 Cal.diy | 2026-10-02 | 6.3 Medium |
| A security flaw has been discovered in calcom cal.diy up to 6.2.0. This affects the function doesUserIdHaveAccessToBooking of the file BookingAccessService.ts of the component PBAC Permission Engine. Performing a manipulation results in missing authorization. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks. The pull request to fix this issue awaits acceptance. | ||||
| CVE-2026-95314 | 1 Google | 1 Chrome | 2026-10-02 | 8.1 High |
| Incorrect authorization in HID in Google Chrome prior to 154.0.8037.57 allowed a remote attacker who had compromised the renderer process to bypass system access restrictions via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-64001 | 1 Linux | 1 Linux Kernel | 2026-10-02 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: oss: Fix setup list UAF on proc write error snd_pcm_oss_proc_write() links a newly allocated setup entry into the OSS setup list before duplicating the task name. If the task-name allocation fails, the error path frees the already linked entry and leaves setup_list pointing at freed memory. A later OSS device open can then walk the stale list entry in snd_pcm_oss_look_for_setup() and dereference freed memory. Allocate the task name and initialize the setup entry before publishing the entry on setup_list. Also fetch the initial proc read iterator only after taking setup_mutex, so all setup_list traversal follows the same list lifetime rules. | ||||
| CVE-2026-64008 | 1 Linux | 1 Linux Kernel | 2026-10-02 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/rocket: fix UAF via dangling GEM handle in create_bo rocket_ioctl_create_bo() inserts a GEM handle into the file's IDR via drm_gem_handle_create() early on, then performs several operations that can fail (sgt allocation, drm_mm insert, iommu_map). If any fail after the handle is live, the error path calls drm_gem_shmem_object_free() which kfree's the object without removing the handle from the IDR. This leaves a dangling handle pointing to freed slab memory. Any subsequent ioctl using that handle (PREP_BO, FINI_BO, SUBMIT) calls drm_gem_object_lookup() and dereferences freed memory (UAF). Fix by moving drm_gem_handle_create() to after all fallible operations succeed, matching the pattern used by panfrost, lima, and etnaviv. Also fix drm_mm_insert_node_generic() whose return value was silently overwritten by iommu_map_sgtable() on the next line. Add the missing error check. [tomeu: Move handle creation to the very end] | ||||
| CVE-2026-95285 | 1 Google | 2 Android, Chrome | 2026-10-02 | 8.4 High |
| Missing authorization in WebView in Google Chrome on on Android prior to 154.0.8037.57 allowed a remote attacker who had compromised the renderer process to bypass web origin policy via a crafted HTML page. (Chromium security severity: Low) | ||||