Export limit exceeded: 410942 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 410942 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (410942 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98566 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/imagination: clamp freelist reconstruction requests The firmware reconstruction count controls accesses to the request's fixed freelist ID array and the copy into the fixed response array. Neither access currently bounds the count to those protocol arrays. Clamp the count to the request capacity, which is shared by the response layout, and use that count consistently for reconstruction and response publication. Keep the firmware recovery exchange instead of dropping an oversized request without a response, as discussed with the firmware maintainer. The issue was found by our static-analysis tool. | ||||
| CVE-2026-98592 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: spacemit: clear TX descriptor on fragment mapping failure emac_tx_mem_map() writes TX_DESC_0_OWN into the ring descriptor for every slot beyond old_head as soon as that slot's memset()'d local copy is committed with "*tx_desc_addr = tx_desc", i.e. before the buffers for that slot have necessarily all been mapped successfully. If emac_tx_map_frag() then fails on a later fragment, the err_free_skb path calls emac_free_tx_buf() to unmap and drop the skb, but leaves the already-written descriptor memory untouched, and tx_ring->head is never advanced past old_head (the "tx_ring->head = head" store is skipped by the goto). So a slot between old_head and the rolled-back head can be left with TX_DESC_0_OWN set and buffer_addr_{1,2} pointing at DMA mappings that emac_free_tx_buf() just tore down, while software considers that slot free again. The next successful emac_tx_mem_map() call only rebuilds old_head itself; if the DMA engine auto-advances into the following descriptor once it finishes old_head's packet, it will fetch that stale, already-unmapped address. emac_tx_clean_desc() already treats emac_free_tx_buf() and clearing the descriptor as a pair when reclaiming completed descriptors; do the same in the mapping failure path. | ||||
| CVE-2026-98702 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reject invalid 320 MHz CSA bandwidth The HT/VHT channel definition validator can receive a 320 MHz bandwidth indication from a received CSA frame on a non-6 GHz link. It warns for this unsupported width but continues with an uninitialized vht_operation.chan_width, which is then read by ieee80211_chandef_vht_oper(). With panic_on_warn enabled, this lets a received frame panic the kernel. Reject the channel definition before entering the VHT operation conversion. This preserves the existing CSA fallback while avoiding both the warning and the uninitialized read. | ||||
| CVE-2026-98749 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: max3100: shut down timer before freeing port max3100_shutdown() stops the polling timer but returns early during system suspend. If the SPI device is unbound before resume, the serial core does not call max3100_shutdown() again, so max3100_remove() frees the port while the timer remains armed. max3100_timeout() may then access the freed port and re-arm the timer. Add final timer teardown to max3100_remove() and use timer_shutdown_sync() to prevent a racing callback from re-arming it. Also free the IRQ and destroy the workqueue there before freeing the port. Keep timer_delete_sync() in max3100_shutdown() so that a subsequent open() can re-arm the timer. The workqueue is created before request_irq() and destroyed on both request_irq() failure and normal shutdown. Its presence at remove thus identifies the IRQ left registered when suspend bypasses shutdown. Free the IRQ before destroying the workqueue, in both max3100_shutdown() and max3100_remove(), and cancel the pending work in between. free_irq() waits for a running interrupt handler to finish and no new handler can start afterwards, so a racing handler cannot queue work on a workqueue that is being destroyed; the force_end_work check in max3100_dowork() only narrows that window, as a handler delayed between the check and queue_work() could still run after the teardown has cleared the workqueue pointer. Cancelling the work also keeps destroy_workqueue() from waiting on a queued work item in case remove() ever runs while the freezable workqueue is still frozen, e.g. device removal during the resume window, before workqueues are thawed. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-98801 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: restrict SO_RESERVE_MEM to TCP sockets and cap max value Commit 2bb2f5fb21b0 ("net: add new socket option SO_RESERVE_MEM") and commit d00c8ee31729 ("net: fix possible NULL deref in sock_reserve_memory") only checked sk_has_account(sk), which is true for both TCP and UDP sockets. However, SO_RESERVE_MEM and sk_unused_reserved_mem() are currently only supported by TCP: - On UDP sockets, sk->sk_forward_alloc is protected by sk->sk_receive_queue.lock, whereas sock_reserve_memory() and sock_release_reserved_memory() only acquire lock_sock(sk). Concurrent UDP packet reception/release and setsockopt(SO_RESERVE_MEM) corrupt sk_forward_alloc and memcg accounting. - udp_rmem_release() reclaims excess sk_forward_alloc without accounting for sk_unused_reserved_mem(sk). Restrict sock_reserve_memory() to TCP sockets (sk_is_tcp(sk)) for now. Supporting SO_RESERVE_MEM for UDP (acquiring sk_receive_queue.lock and honoring sk_unused_reserved_mem() in udp_rmem_release()) can be done in a future net-next series if needed. In addition, reject val > SZ_1G with -EINVAL in sk_setsockopt(SO_RESERVE_MEM). Without an upper bound, values near INT_MAX cause sk_mem_pages(delta) and (pages << PAGE_SHIFT) to overflow 32-bit signed int, corrupting sk->sk_forward_alloc and sk->sk_reserved_mem. Using a page-aligned cap (SZ_1G) ensures that the page-rounded sk->sk_reserved_mem reported by getsockopt(SO_RESERVE_MEM) can always be passed back to setsockopt(SO_RESERVE_MEM). | ||||
| CVE-2026-107082 | 2026-10-20 | 8.8 High | ||
| Slims (Senayan Library Management Systems) 9 Bulian 9.8.0 allows an authenticated staff user to perform SQL injection via the opac_hide and promoted GET parameters of admin/modules/bibliography/index.php, because escape_string() is applied but the values are concatenated into an unquoted numeric SQL context, leading to error-based information disclosure and arbitrary data extraction. | ||||
| CVE-2026-28850 | 1 Apple | 1 Visionos | 2026-10-20 | 5.5 Medium |
| An authorization issue was addressed with improved state management. This issue is fixed in visionOS 27. An app may be able to access sensitive user data. | ||||
| CVE-2026-65372 | 1 Apple | 1 Macos | 2026-10-20 | 4.7 Medium |
| A race condition was addressed with additional validation. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7. A malicious application may be able to bypass Privacy preferences. | ||||
| CVE-2026-86963 | 1 Apple | 1 Ios And Ipados | 2026-10-20 | 5.9 Medium |
| A denial-of-service issue was addressed with improved input validation. This issue is fixed in iOS 26.7 and iPadOS 26.7, iOS 27 and iPadOS 27. An attacker in a privileged network position may be able to cause a denial-of-service. | ||||
| CVE-2026-97823 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-20 | 6.5 Medium |
| Out-of-bounds read in DNS Server allows an authorized attacker to disclose information over a network. | ||||
| CVE-2026-92392 | 2 Curl, Redhat | 2 Curl, Hummingbird | 2026-10-20 | 8.1 High |
| During an upload, curl mishandles HTTP/2 `RST_STREAM` received from the server (with reason `HTTP_1_1_REQUIRED` or `REFUSED_STREAM`) leading to a use after free of a `struct Curl_easy` object. | ||||
| CVE-2026-110031 | 1 Wordpress-extensions | 1 Salon Booking System | 2026-10-20 | 7.2 High |
| The Salon Booking System WordPress plugin before 10.31.11 does not prevent users holding its custom salon staff role from assigning arbitrary capabilities to other accounts when editing a customer, allowing them to escalate any account to administrator and take over the site. | ||||
| CVE-2026-113404 | 1 Uniong | 1 Webitr | 2026-10-20 | 8.8 High |
| WebITR developed by Uniong has a Insecure Deserialization vulnerability. Authenticated remote attackers can use the hard-coded cryptographic key to craft and submit malicious serialized data, thereby executing arbitrary code on the server. | ||||
| CVE-2026-102461 | 1 Eclipse | 1 Vert.x | 2026-10-20 | 5.9 Medium |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the uniqueItems keyword validation uses an O(n²) pairwise comparison loop with no short-circuit or size limit. A remote unauthenticated attacker can submit a moderately-sized JSON array that consumes disproportionate CPU time, leading to denial of service. The impacted component is io.vertx:vertx-json-schema. The following Vert.x modules depend on vertx-json-schema and are also affected: io.vertx:vertx-web-openapi-router io.vertx:vertx-web-validation io.vertx:vertx-openapi | ||||
| CVE-2026-102462 | 1 Eclipse | 1 Vert.x | 2026-10-20 | 5.9 Medium |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the TDS message decoder in the Vert.x MSSQL client (vertx-mssql-client) aggregates inbound TDS packets into a composite direct-memory buffer without any cumulative size limit. A malicious, compromised, or man-in-the-middle SQL Server can send a continuous stream of TDS packets without setting the END_OF_MESSAGE status flag, causing unbounded direct-memory allocation on the client and leading to an out-of-memory crash. This occurs before authentication completes. The impacted component is io.vertx:vertx-mssql-client. | ||||
| CVE-2026-102463 | 1 Eclipse | 1 Vert.x | 2026-10-20 | 5.9 Medium |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the binary array decoder in vertx-pg-client (DataTypeCodec.binaryDecodeArray) allocates a Java array sized by a server-declared 32-bit dimension count with no upper bound. A malicious or compromised PostgreSQL server, or an on-path attacker intercepting an unencrypted connection, can send a crafted DataRow message with an excessively large array dimension value, causing the client to attempt a multi-gigabyte heap allocation and crash with an OutOfMemoryError. The impacted component is io.vertx:vertx-pg-client. | ||||
| CVE-2026-102464 | 1 Eclipse | 1 Vert.x | 2026-10-20 | 5.9 Medium |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Eclipse Vert.x MQTT (vertx-mqtt) MqttClient stores every inbound QoS 2 PUBLISH message received from the broker in an internal map (qos2inbound) while awaiting the corresponding PUBREL packet to complete the QoS 2 handshake. This map has no size limit; the maxInflightQueue option is enforced only on the outbound publish path and does not constrain inbound message retention. A malicious or compromised MQTT broker can exploit this by sending QoS 2 PUBLISH messages with distinct packet identifiers and withholding the PUBREL responses. Each incomplete handshake causes the client to retain the full publish message (topic, payload, and metadata) indefinitely, leading to unbounded memory growth in the Vert.x process. This can degrade the MQTT-consuming application or cause out-of-memory termination. The impacted component is io.vertx:vertx-mqtt. | ||||
| CVE-2026-102466 | 1 Eclipse | 1 Vert.x | 2026-10-20 | 5.9 Medium |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Vert.x MySQL client (vertx-mysql-client) pre-allocates an array for column definitions based on a server-declared column count with no upper-bound validation. A malicious or compromised MySQL server, or an attacker with man-in-the-middle positioning, can send a crafted result set packet with an extremely large column count, causing the client to attempt a massive heap allocation. The resulting OutOfMemoryError crashes the Netty event loop thread, causing a complete denial of service for all connections and verticles in the Vert.x application. The impacted component is io.vertx:vertx-mysql-client. | ||||
| CVE-2026-102469 | 1 Eclipse | 1 Vert.x | 2026-10-20 | 5.9 Medium |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Vert.x DB2 client (vertx-db2-client) contains DRDA protocol handling code that deserializes User Defined Type (UDT) column data using a bare ObjectInputStream.readObject() call with no ObjectInputFilter or class allowlist. This code path is triggered when a DRDA server sends a result set with a column tagged as UDT (FDOCA protocol LID 0x50). However, DB2 does not support this type of UDT. The FDOCA 0x50 type is never sent by a legitimate DB2 server. Nevertheless, a malicious or man-in-the-middle DRDA server could craft a response with a 0x50-tagged column, causing the client to deserialize arbitrary attacker-controlled bytes on the Vert.x event loop before any application code can inspect or reject the data. If a Java deserialization gadget chain is present on the application's classpath, this enables remote code execution. Without a gadget chain, denial of service is possible via crafted object graphs. TLS is disabled by default, making man-in-the-middle exploitation feasible. The impacted component is io.vertx:vertx-db2-client. | ||||
| CVE-2026-102477 | 1 Eclipse | 1 Vert.x | 2026-10-20 | 5.9 Medium |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], a gRPC endpoint does have a configurable per message maximum size in bytes, however the maximum size applies to the received bytes. When applied to a compressed message, this only applies to the compressed size and not the actual size of the uncompressed content. This can be used to force a gRPC endpoint to allocate more bytes than the value defined by the configuration, making the endpoint vulnerable to compression bomb attacks. The impacted component is io.vertx:vertx-gprc-server. | ||||