Export limit exceeded: 410867 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (410867 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98826 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rtc: ac100: Fix clock provider use-after-free on probe failure ac100_rtc_register_clks() registers the RTC-32k clock with clk_hw_register_fixed_rate() and the clock provider with of_clk_add_hw_provider(). Neither is device managed, and both are released only from ac100_rtc_remove(). The driver core does not call remove() when probe() fails: really_probe() reaches probe_failed below the device_remove() call and goes straight to releasing the device's managed resources. ac100_rtc_probe() ends with return devm_rtc_register_device(chip->rtc); so if that fails after the clocks have been registered, the provider is left on the global of_clk_providers list holding chip->clk_data, which was allocated with devm_kzalloc() and is freed while probe() unwinds. A later lookup on this device tree node then reads freed memory in of_clk_hw_onecell_get(). Consumers that do exactly that exist in tree: the wifi power sequence nodes on sun8i-a83t-bananapi-m3 and sun8i-a83t-cubietruck-plus take <&ac100_rtc 1>, and the sun9i-a80 boards route osc32k through <&ac100_rtc 0>. The window is narrow, as devm_rtc_register_device() can only fail with -ENOMEM here, but the provider is left dangling whenever it does. The RTC-32k clock is leaked on the same path. Since clk_core_lookup() searches a global list that is not scoped per device, __clk_register() rejects the duplicate name with -EEXIST, so the leak also makes a later probe of the same device fail. The error path that returns -EINVAL when the ADDA 4M parent clock cannot be found leaks the RTC-32k clock in the same way. No provider has been registered at that point, so that one is a leak rather than a use-after-free. Register both with devm_clk_hw_register_fixed_rate() and devm_of_clk_add_hw_provider() so that they are released whenever the device goes away, on a failed probe as well as on unbind. Devres releases in reverse order of acquisition, so the provider is removed before chip->clk_data is freed, and the clkout children are now unregistered before their parent rather than after it. ac100_rtc_unregister_clks() and the remove callback then have nothing left to do and are removed. | ||||
| CVE-2026-112293 | 2026-10-19 | 5.4 Medium | ||
| BoxyHQ Enterprise SaaS Starter Kit through 1.6.0 contains a missing authorization vulnerability that allows non-owner team members to manage billing because payment routes skip the team_payments permission check. Authenticated MEMBER or ADMIN users can call create-portal-link, create-checkout-session, and products to open Stripe billing portals, view invoices, change payment methods, or alter subscriptions. | ||||
| CVE-2026-112273 | 2026-10-19 | 5.3 Medium | ||
| libtins through 4.6 contains a heap out-of-bounds read vulnerability in DNS::compose_name in src/dns.cpp that allows remote attackers to read past the packet buffer by sending a label ending exactly at the packet end. Attackers can deliver crafted DNS packets whose additional, answer, or authority records trigger a one-byte read when parsed, crashing applications on hardened allocators. | ||||
| CVE-2026-112268 | 2026-10-19 | 6.3 Medium | ||
| sglang-router (sgl-model-gateway) through 0.3.2 contains an authorization bypass vulnerability that allows holders of the data-plane API key to access mesh HA management routes because /ha/* endpoints skip control-plane Admin role checks. Attackers can read cluster topology, write gossiped configuration, change global rate limits, and call POST /ha/shutdown to silently dissolve HA coordination. | ||||
| CVE-2026-111936 | 2026-10-19 | 4.3 Medium | ||
| Sigma File Manager through 2.2.0 contains a server-side request forgery vulnerability because validate_remote_url() in security.rs never checks resolved IP addresses for extension download commands. A malicious extension or catalog entry can use hostnames resolving to loopback, private, or cloud metadata addresses to read internal responses via files written to the extension directory. | ||||
| CVE-2026-112145 | 1 Speaches-ai | 1 Speaches | 2026-10-19 | 7.3 High |
| A security vulnerability has been detected in speaches-ai speaches up to 0.9.0-rc.3. This vulnerability affects the function PyannoteDiarizationModelManager._load_fn of the file src/speaches/executors/pyannote_diarization.py of the component Pyannote Diarization Model Loading. The manipulation of the argument model leads to use of externally-controlled input to select classes or code. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The feature was introduced in PR #628 (feat/switch to pyannote audio), merged as commit 870e1e16a73452496e99d49f759eabd692a8e0e0. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-109720 | 1 Mozilla | 1 Firefox | 2026-10-19 | 7.1 High |
| JIT miscompilation in the JavaScript: WebAssembly component. This vulnerability was fixed in Firefox 158, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. | ||||
| CVE-2026-98438 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 3.7 Low |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: options: fix uninit-value in mptcp_write_data_fin When sending a DATA_FIN without data, and because the DATA_FIN occupies 1 octet of the connection-level sequence space [1], it is then required to add a DSS mapping with specific values. If the checksum has been negotiated, it also needs to be computed, and included in the outgoing packet, and thus the initial csum data needs to be reset to 0 as well. This is no longer the case since commit cfcceb7a39fc ("tcp: shrink per-packet memset in __tcp_transmit_skb()"), because the whole ext_copy structure is no longer zeroed by default. This seems to be the only case where use_map is changed and set afterwards, so initialising the csum field only in this case, along with other fields for this specific case. | ||||
| CVE-2026-81452 | 1 Dell | 1 Alienware Command Center | 2026-10-19 | 7 High |
| Dell Alienware Command Center (AWCC), versions prior to 6.14.54.0, contain a Least Privilege Violation vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of Privilege and Denial of Service. | ||||
| CVE-2026-98748 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250_bcm7271: fix use-after-free in brcmuart_remove() brcmuart_handle_irq() starts priv->hrt to work around a receive-timeout quirk of the 8250 core when hardware flow control is enabled; the timer callback brcmuart_hrtimer_func() dereferences priv. brcmuart_remove() cancels the hrtimer before it unregisters the port, so a receive-timeout interrupt that arrives in between re-arms the timer. After devm frees priv, the callback runs on freed memory. Unregister the port before cancelling the hrtimer. serial8250_unregister_port() shuts the port down and frees its IRQ, so brcmuart_handle_irq() can no longer restart the timer, and the final hrtimer_cancel() drains any timer that was armed before or during the unregister. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-109740 | 1 Mozilla | 1 Firefox | 2026-10-19 | 9.6 Critical |
| Sandbox escape due to incorrect boundary conditions in the Widget: Win32 component. This vulnerability was fixed in Firefox 158, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. | ||||
| CVE-2026-98749 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: max3100: shut down timer before freeing port max3100_shutdown() stops the polling timer but returns early during system suspend. If the SPI device is unbound before resume, the serial core does not call max3100_shutdown() again, so max3100_remove() frees the port while the timer remains armed. max3100_timeout() may then access the freed port and re-arm the timer. Add final timer teardown to max3100_remove() and use timer_shutdown_sync() to prevent a racing callback from re-arming it. Also free the IRQ and destroy the workqueue there before freeing the port. Keep timer_delete_sync() in max3100_shutdown() so that a subsequent open() can re-arm the timer. The workqueue is created before request_irq() and destroyed on both request_irq() failure and normal shutdown. Its presence at remove thus identifies the IRQ left registered when suspend bypasses shutdown. Free the IRQ before destroying the workqueue, in both max3100_shutdown() and max3100_remove(), and cancel the pending work in between. free_irq() waits for a running interrupt handler to finish and no new handler can start afterwards, so a racing handler cannot queue work on a workqueue that is being destroyed; the force_end_work check in max3100_dowork() only narrows that window, as a handler delayed between the check and queue_work() could still run after the teardown has cleared the workqueue pointer. Cancelling the work also keeps destroy_workqueue() from waiting on a queued work item in case remove() ever runs while the freezable workqueue is still frozen, e.g. device removal during the resume window, before workqueues are thawed. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-69880 | 1 Microsoft | 20 Windows 10 1809, Windows 10 21h2, Windows 10 21h2 and 17 more | 2026-10-19 | 7.8 High |
| Access of resource using incompatible type ('type confusion') in Desktop Window Manager allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-69882 | 1 Microsoft | 12 Windows 11 23h2, Windows 11 23h2, Windows 11 24h2 and 9 more | 2026-10-19 | 7.8 High |
| Untrusted search path in Windows Update allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-69883 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-19 | 9.8 Critical |
| Use after free in Windows iSCSI allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-69991 | 1 Microsoft | 22 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 19 more | 2026-10-19 | 7.5 High |
| Use after free in Remote Desktop Client allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-77474 | 2026-10-19 | 7.1 High | ||
| destructive_command_guard (dcg) is a command-line safety tool that blocks destructive shell commands before AI coding agents run them. Prior to 0.6.6, nested or unclosed substitutions are recursively rescanned after an inner scan returns unterminated, producing exponential-time work. The affected scanners are reached through split_command_segments in src/packs/mod.rs. a destructive command followed by nested or unclosed $( or $(( sequences. nested or unclosed $( and $(( sequences cause repeated rescanning of the remaining command suffix. a hung PreToolUse hook fails open, allowing the destructive command to proceed. This issue is fixed in version 0.6.6. | ||||
| CVE-2026-68906 | 1 Mz-automation | 1 Libiec61850 | 2026-10-19 | N/A |
| libIEC61850 is an open-source implementation of IEC 61850 client and server protocols including MMS, GOOSE, Sampled Values, and R-Session. Prior to 1.6.2, parseUserInformation in src/mms/iso_acse/acse.c checks len for zero before validating the negative bufPos returned by BerDecoder_decodeLength for a truncated long-form length. The continue path therefore swallows the error, reads buffer[-1], resets parsing to the beginning, and repeats the same malformed state. An unauthenticated remote peer can send a malformed AARE PDU during association to cause an infinite CPU loop under a normal allocator or a one-byte out-of-bounds read and process abort when the preceding byte is inaccessible. This issue is fixed in version 1.6.2. | ||||
| CVE-2026-59967 | 1 Tandoorrecipes | 1 Recipes | 2026-10-19 | 5.4 Medium |
| Tandoor Recipes is an application for managing recipes, planning meals, and building shopping lists. Prior to 2.6.10, looks up BookmarkletImport by sequential primary key within the active Space without restricting created_by to the requesting user when an authenticated member of a shared Space submits another member's pending bookmarklet identifier to POST /api/recipe-from-source/. Request processing uses api/recipe-from-source/, BookmarkletImport, filter, delete. The attack works because the endpoint parses and returns the victim's stored URL and captured page content, then unconditionally deletes the victim's pending import. This can disclose authenticated or private captured page content and destroy another Space member's pending import. This issue is fixed in version 2.6.10. | ||||
| CVE-2026-41582 | 2026-10-19 | 7.5 High | ||
| countly-server is the server-side part of Countly, a product analytics solution. Prior to 24.05.50 and 25.03.44, public image and screenshot routes implemented in frontend/express/app.js, plugins/star-rating/frontend/app.js, and plugins/dashboards/frontend/app.js concatenate attacker-controlled wildcard paths without containment validation. On deployments using the local filesystem backend, an unauthenticated request can traverse outside the intended asset directories and reach getStats or getStream in api/utils/countlyFs.js, allowing arbitrary readable server files to be disclosed. The affected routes include /appimages/*, /memberimages/*, */screenshots/*, /star-rating/images/*, and /dashboards/images/screenshots/*. This issue is fixed in versions 24.05.50 and 25.03.44. | ||||