Export limit exceeded: 408903 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 408903 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 408903 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (408903 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98419 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drop_monitor: fix out-of-bounds write in reset_per_cpu_data() In reset_per_cpu_data(), al is computed as: al = sizeof(struct net_dm_alert_msg); al += dm_hit_limit * sizeof(struct net_dm_drop_point); al += sizeof(struct nlattr); skb = genlmsg_new(al, GFP_KERNEL); ... nla = nla_reserve(skb, NLA_UNSPEC, sizeof(struct net_dm_alert_msg)); ... msg = nla_data(nla); memset(msg, 0, al); Because al includes sizeof(struct nlattr) (the 4-byte attribute header), genlmsg_new() allocates al bytes of tailroom starting at nla. However, msg points to nla_data(nla), which is located sizeof(struct nlattr) bytes past nla. Calling memset(msg, 0, al) therefore writes al bytes starting from msg, exceeding the allocated buffer by sizeof(struct nlattr) (4 bytes) and corrupting skb_shared_info. Fix this by letting al represent only the payload length, allocating the skb with genlmsg_new(nla_total_size(al), GFP_KERNEL), and zeroing al bytes from msg. | ||||
| CVE-2026-98421 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: require a peer station for TDLS setup confirm It's nonsense for the setup confirm to go to station that doesn't even exist, and it hits a warning when building the frame: WARN_ON_ONCE(!sta || !ap_sta) Only accept WLAN_TDLS_SETUP_CONFIRM when the station is already there as a TDLS station. Need to copy the call to ieee80211_tdls_prep_mgmt_packet() since the existing WLAN_TDLS_DISCOVERY_REQUEST already falls through to it. | ||||
| CVE-2026-98423 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211_hwsim: don't hand frames to mac80211 while stopping The code checks ->started for frames coming from wmediumd, but the radio can be stopped after the check and before frame delivery, causing mac80211 to hit the WARN_ON(!local->started). Expand the mutex for this case and synchronise against it when the radio is stopped to avoid being able to hit the warning with hwsim. Drop the error print that would've complicated the error path, it only triggers for allocation failures (already noisy) and malformed frames anyway. | ||||
| CVE-2026-94449 | 1 Redhat | 5 Apicurio Registry, Camel Quarkus, Exploit Intelligence and 2 more | 2026-10-15 | 7.5 High |
| A flaw was found in the SmallRye Fault Tolerance library, which is used by Quarkus to provide strategies like retries and circuit breakers for microservices. The issue occurs when using the ApplyGuard or ApplyFaultTolerance annotations, where the library fails to release internal tracking objects after each request. This causes a steady increase in memory usage that eventually leads to the application slowing down and crashing due to lack of memory. | ||||
| CVE-2026-89059 | 1 Redhat | 22 Apicurio Registry, Build Keycloak, Build Of Apache Camel For Quarkus and 19 more | 2026-10-15 | 7.5 High |
| A flaw was found in RESTEasy's IIOImageProvider, which decodes attacker-supplied image request bodies without enforcing any limit on the declared image dimensions or pixel count. A remote, unauthenticated attacker can send a small crafted image declaring enormous dimensions to trigger a very large memory allocation, exhausting the JVM heap and resulting in a denial of service. | ||||
| CVE-2026-87744 | 1 Redhat | 3 Build Of Quarkus, Exploit Intelligence, Quarkus | 2026-10-15 | 9.1 Critical |
| A flaw was found in Quarkus REST Data Panache. This vulnerability allows unauthenticated attackers to bypass security controls on generated endpoints. When a developer customizes a specific operation using @MethodProperties without explicitly re-declaring security roles, the code generator silently drops class-level security requirements. This results in the affected endpoint defaulting to permissive, unauthenticated access, potentially leading to unauthorized information disclosure or data modification. | ||||
| CVE-2026-98399 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/ipl: Fix NULL deref in dump_reipl without re-IPL parm block Unlike kdump, which passes the re-IPL parameter block through os_info, the stand-alone dump passes it through the IPL parm block address and checksum in lowcore. Some IPL types, like HMC FTP boot or QEMU direct kernel boot, might not provide an IPL parameter block. In this case reipl_type_init() selects IPL_TYPE_UNKNOWN and reipl_block_actual remains NULL. Nevertheless, dump_reipl_run() unconditionally dereferences it when preparing the lowcore fields. This may happen to work by chance when address zero contains readable lowcore data. A zero IPL parameter block address is then stored in lowcore, causing the stand-alone dumper to enter disabled wait after completing the dump. Explicitly store a zero IPL parameter block address and checksum when no re-IPL parameter block is available. This does not change the behavior: the stand-alone dumper completes the dump and halts, while valid re-IPL parameter blocks continue to be handled as before. | ||||
| CVE-2026-98400 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/ipl: Fix NULL deref in kdump without re-IPL parm block Some IPL types, like HMC FTP boot or QEMU direct kernel boot, might not provide an IPL parameter block. In this case, reipl_type_init() selects IPL_TYPE_UNKNOWN, and reipl_block_actual remains NULL. kdump passes the re-IPL parameter block to the dump kernel through os_info. Before commit 3b9678472bab ("s390/ipl: correct kdump reipl block checksum calculation"), the os_info entry was added only for IPL types which initialized reipl_block_actual. That commit moved the os_info update to machine_crash_shutdown(), making it unconditional. As a result, set_os_info_reipl_block() dereferences reipl_block_actual for IPL_TYPE_UNKNOWN. This may happen to work by chance when address zero contains readable lowcore data and the resulting empty os_info entry is ignored by the dump kernel. Skip the os_info update when no re-IPL parameter block is available. Kdump then collect the dump and reboot without setting re-IPL parameter block. | ||||
| CVE-2026-98401 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: iptunnel: fix stale transport header during tunnel decapsulation Syzbot reported a crash in qdisc_pkt_len_segs_init() caused by a stale transport_header offset after tunnel decapsulation. BUG: unable to handle page fault for address: ffffed102091a42e Oops: Oops: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 340 Comm: qdisc_uaf_repro Not tainted 7.2.0-rc4-00061-g248951ddc14d #256 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:__asan_load2 <IRQ> qdisc_pkt_len_segs_init (net/core/dev.c:4145) __dev_queue_xmit (net/core/dev.c:4787) br_dev_queue_push_xmit (net/bridge/br_forward.c:53) br_handle_frame_finish (net/bridge/br_input.c:229) br_handle_frame (net/bridge/br_input.c:315) __netif_receive_skb_core.constprop.0 (net/core/dev.c:6099) __netif_receive_skb_list_core (net/core/dev.c:6287) netif_receive_skb_list_internal (net/core/dev.c:6445) napi_complete_done (net/core/dev.c:6813) gro_cell_poll (net/core/gro_cells.c:74) __napi_poll (net/core/dev.c:7735) net_rx_action (net/core/dev.c:7798 net/core/dev.c:7955) handle_softirqs (kernel/softirq.c:622) do_softirq (kernel/softirq.c:523 kernel/softirq.c:510 ) __local_bh_enable_ip (kernel/softirq.c:450) tun_get_user (drivers/net/tun.c:1986 (discriminator 1)) tun_chr_write_iter (drivers/net/tun.c:2032) The issue is completely latent until qdisc read transport header in commit 7fb4c1967011 ("net: pull headers in qdisc_pkt_len_segs_init()"). The crash requires four conditions to line up: 1. The incoming packet is encapsulated and carries GSO metadata. The outer transport header offset is stored in skb->transport_header while the packet is still in the outer tunnel context. 2. The tunnel receiver strips the outer headers. skb->data is advanced to the inner frame, but skb->transport_header is left pointing to the now-removed outer L4 header, so it becomes a negative offset relative to the new data. 3. The inner frame is not delivered to the local IP stack. Instead, it is forwarded at L2 by a bridge or HSR, so ip_rcv_core() never runs and the transport header is not reset to the inner L4 offset. 4. The forwarding path calls __dev_queue_xmit(), which enters qdisc_pkt_len_segs_init(). That function computes the GSO header length from skb_transport_offset(skb). Because the offset is negative, the unsigned cast overflows and pskb_may_pull(skb, hdr_len + sizeof(struct tcphdr)) reads past the end of the skb, triggering a KASAN fault or page fault. The issue specifically requires GSO packets (shinfo->gso_size != 0), which are processed/aggregated through gro_cells. Fix this by clearing transport_header to the ~0U sentinel in gro_cell for all tunnnel driver. GTP does not support GRO/GSO, drop the evil GSO packets in GTP directly. | ||||
| CVE-2026-98426 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: fix IRQ leak using wrong index in MSI-X error path mwifiex_pcie_request_irq() registers each MSI-X vector with a per-index dev_id (&card->msix_ctx[i]). On a request_irq() failure the cleanup loop "for (j = 0; j < i; j++)" frees msix_entries[j].vector but passes the failed index's &card->msix_ctx[i] as the dev_id. free_irq() matches on (irq, dev_id), so it fails to find the action registered with &card->msix_ctx[j]: the already-requested IRQ j is not freed (leaked) and free_irq() warns about freeing a non-existent IRQ. Use &card->msix_ctx[j]. | ||||
| CVE-2026-98430 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/efa: Keep admin queues alive while IRQ is registered The management IRQ handler accesses both the admin completion queue and the async event queue. The driver registered the IRQ before constructing these queues and destroyed them before freeing the IRQ, so the handler's lifetime was not contained by the resources it accesses. Initialize the queues with interrupts masked, request the IRQ, and then switch to interrupt mode. On removal, reset the device and free the IRQ before destroying the queues. Also reset the device before destroying the queues if IRQ registration fails, because the device already has their DMA addresses. | ||||
| CVE-2026-98404 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: Fix a NULL vs ERR_PTR() bug in virtio_gpu_user_framebuffer_create() Smatch complains that returning a NULL here will lead to a NULL pointer dereference in drm_mode_addfb2(). Return an error pointer instead. | ||||
| CVE-2026-98406 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: avoid WARN in set_bitrate_mask when sdata not in driver ieee80211_set_bitrate_mask() checks if the interface is running via ieee80211_sdata_running(), but it does not check if the interface is still present in the driver. When sdata is running but IEEE80211_SDATA_IN_DRIVER is not set, the call reaches drv_set_bitrate_mask() in driver-ops.h which hits wlan1: Failed check-sdata-in-driver check, flags: 0x0 WARNING: net/mac80211/driver-ops.h:884 at drv_set_bitrate_mask Syzkaller triggers this via wext SIOCSIWRATE ioctl. The Call Trace shows wext_ioctl_dispatch() in wext-core.c dispatching the ioctl, calling ioctl_standard_call() for SIOCSIWRATE, which calls cfg80211_wext_siwrate() in wext-compat.c. That builds a bitrate mask and calls rdev_set_bitrate_mask() which ends up in ieee80211_set_bitrate_mask() in cfg.c. The interface is marked running via SDATA_STATE_RUNNING but flags is 0, so check_sdata_in_driver() fails. When the interface is being torn down, or when wext ioctl is issued during interface bringup before drv_add_interface() sets IN_DRIVER, the running check passes while IN_DRIVER is clear. Check IEEE80211_SDATA_IN_DRIVER in ieee80211_set_bitrate_mask() before calling the driver, returning -ENETDOWN. This avoids the WARN_ONCE in driver-ops.h and matches other cfg.c operations that bail early when not in driver. This change should be safe because wiphy mutex is held in cfg80211_wext_siwrate() via guard(wiphy), and IN_DRIVER is set/cleared under RTNL and wiphy paths in drv_add_interface() and drv_remove_interface() in driver-ops.c, so the check is race-free against driver add/remove. Returning -ENETDOWN is the same error other not-running paths use and does not introduce new locking. [also add second syzbot report] | ||||
| CVE-2026-98407 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rsi: fix heap OOB write on key removal When a key is removed (data == NULL), rsi_hal_load_key() runs: memset(&set_key[FRAME_DESC_SZ], 0, frame_len - FRAME_DESC_SZ); set_key is a struct rsi_set_key *, so the subscript is scaled by sizeof(struct rsi_set_key) (160 bytes): &set_key[FRAME_DESC_SZ] is skb->data + 2560, and the memset writes 144 zero bytes starting 2.4KB past the end of the 160-byte skb data buffer, corrupting unrelated heap objects. The intended byte offset would have been (u8 *)set_key + FRAME_DESC_SZ. The write fires on every DISABLE_KEY callback, so plain disconnects, roams and interface teardowns trigger it on real networks. The memset is redundant: the whole buffer is zeroed right after allocation, so the frame sent to the device is byte-identical without it. Drop the else branch; normal operation is unaffected. Discovered by Atuin - Automated Vulnerability Discovery Engine. | ||||
| CVE-2026-98408 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: watchdog: rzv2h: Avoid division by zero clk_get_rate() could return 0. Avoid a division by zero panic. | ||||
| CVE-2026-98414 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: memcg: avoid charging the root memcg from obj_cgroup_charge_pages() obj_cgroup_charge_pages() resolves the objcg to its memcg and calls try_charge_memcg(), which does not short circuit the root memcg. That memcg can be the root memcg: obj_cgroup_is_root() reflects the memcg the objcg was created for and is never updated, while memcg_reparent_objcgs() does redirect objcg->memcg to the parent on rmdir. An objcg of a dying child of root therefore passes every obj_cgroup_is_root() filter but resolves to the root memcg. Folios keep the objcg they were charged with, so this is easy to reach through zswap: allocate anon memory in a cgroup, move the task out, remove the cgroup, then write to the root cgroup's memory.reclaim. The reclaimed folios are charged through the reparented objcg and end up in refill_stock() with the root memcg: WARNING: mm/memcontrol.c:2198 at refill_stock+0x644/0x940 refill_stock+0x644/0x940 try_charge_memcg+0x12d6/0x1570 __obj_cgroup_charge+0x35/0xf0 obj_cgroup_charge+0x1de/0x210 obj_cgroup_charge_zswap+0x83/0x270 zswap_store+0x1620/0x2000 swap_writeout+0x94c/0x14c0 shrink_folio_list+0x3388/0x52b0 [...] try_to_free_mem_cgroup_pages+0x30d/0x830 user_proactive_reclaim+0x504/0x840 memory_reclaim+0x1f/0x30 Beyond the warning, the charge is asymmetric: obj_cgroup_uncharge_pages() skips refill_stock() for the root memcg, so the root's page counter grows and is never uncharged. It is not user visible, since memory.current is not exposed on the root, but it is a leak. Use try_charge(), which returns early for the root memcg, restoring the symmetry with obj_cgroup_uncharge_pages(). The above sequence was scripted into a standalone reproducer (zswap on, swap on a virtio disk, 512MB of anon memory faulted in inside a child of the root cgroup, the task then migrated to the root cgroup, the child removed, followed by "echo 600M swappiness=max > memory.reclaim" on the root) and run in a CONFIG_DEBUG_VM=y VM. It reproduces the splat on the first zswap store of a reparented folio, with the same call chain as the report. With this patch applied the splat is gone while the zswap store count over the run is unchanged, so the same path is still exercised. cgroup selftests test_zswap, test_kmem and test_memcontrol show no new failures. | ||||
| CVE-2026-98422 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reset the AP_VLAN tailroom counter on ifdown On ifup, AP_VLAN interfaces get crypto_tx_tailroom_needed_cnt from the AP interface, but it's never decremented again unless the AP is also brought down. Thus, bringing the same AP_VLAN up again will increment the counter again and eventually hit the sanity check: WARN_ON_ONCE(sdata->crypto_tx_tailroom_needed_cnt != master->crypto_tx_tailroom_needed_cnt); Reset it on ifdown to avoid that. | ||||
| CVE-2026-98427 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: codel: bound the dropping loop per dequeue call The CoDel control law schedules the next drop one interval/sqrt(count) after the previous drop, using the configured interval (codel_params.interval). For very small intervals the scheduled step rounds down to zero, so the dropping loop in codel_dequeue() never advances and drains the entire backlog under the qdisc lock in one call - an unprivileged user can trigger a soft lockup this way. Fix in the shared codel code used by both codel and fq_codel: 1. Make the control-law step at least 1 tick so the dropping loop always moves forward. 2. Cap the dropping loop at CODEL_MAX_DROPS_PER_DEQUEUE (256) drops per codel_dequeue() call, resyncing drop_next to now when the cap is hit: the catch-up owed to the loop grows with the idle gap and the backlog, which no interval threshold can bound. This is a deliberate behaviour change after long idle gaps. The cap applies to fq_codel (4b549a2ef4be) and the mac80211 TXQ path (fixed interval, cap only). The target sojourn delay (codel_params.target) is not validated: it does not feed the control law, so a sub-tick value is aggressive rather than deadlock-prone. Conditions to recreate the bug: - tc qdisc add dev lo root handle 1: tbf rate 1kbit burst 2kb limit 1000000 - tc qdisc add dev lo parent 1:1 handle 10: codel interval 2us target 1ms noecn limit 1000000 (same for fq_codel) - unpatched kernel: tc accepts it; a UDP flood under the 1kbit tbf soft-lockups (watchdog: BUG: soft lockup) while one codel_dequeue() call drops the backlog under the qdisc lock - patched kernel: same setup, at most 256 drops per dequeue call, no soft lockup Testing: claim reproducer and interval 2us/3us variants run clean; tdc qdisc category passes (see the selftests patch). | ||||
| CVE-2026-98428 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb: 6fire: Avoid embedded URBs The USB 6fire driver uses URBs embedded in different structs for PCM, MIDI and communication, and this is basically a buggy implementation nowadays; since a URB is managed with a refcount, this may lead to a UAF when the URB is released asynchronously. For addressing the problem, this patch converts those embedded URBs to ones that are properly allocated via usb_alloc_urb(). The pcm_urb.packets[] is gone, as it's allocated by usb_alloc_urb(), hence it's found in urb.iso_frame_desc[] instead. The conversions are rather straightforward; each embedded struct urb is changed to a pointer, and its callers are updated accordingly. The resource for those structs are released in the common destructor functions (usb6fire_comm_free(), etc), which are called at both the init error path and the disconnect. No functional changes, only compile-tested. | ||||
| CVE-2026-98429 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/efa: Keep EQ resources alive while IRQ is registered The completion IRQ handler accesses the EQ state and DMA buffer. Its IRQ was registered before that state was initialized, while teardown released the buffer before free_irq() synchronized the handler. Initialize the EQ without arming it, register the IRQ, and then arm it. Reverse the resource order during teardown by freeing the IRQ before destroying the EQ. | ||||