Export limit exceeded: 410119 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (410119 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-112037 | 1 Diem-project | 1 Diem | 2026-10-19 | 3.7 Low |
| A flaw has been found in diem-project diem up to 116974edfb9a5b8bd69cb13586dc62bcdbb485ad. Affected is an unknown function of the file dmCorePlugin/lib/vendor/gapi/gapi.class.php of the component Google Analytics Client. Executing a manipulation can lead to improper certificate validation. The attack may be launched remotely. The attack requires a high level of complexity. The exploitability is told to be difficult. The exploit has been published and may be used. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-98538 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: writeback: bound cleanup_offline_cgwb() rescans by rotating scanned inodes cleanup_offline_cgwb() prepares at most WB_MAX_INODES_PER_ISW inodes per call and is called again until the dying wb is drained, but every call walks wb->b_attached and then wb->b_dirty_time from the same end. Inodes already prepared (they stay on the list with I_WB_SWITCH set until the switch worker runs) and inodes that cannot be switched (I_FREEING, I_WILL_FREE, !SB_ACTIVE, DAX, already on the target wb) stay where they are, so each pass rescans a growing run of them under wb->list_lock and a full drain is quadratic in the number of inodes on the list. With ~17M inodes attached to one dying cgwb we saw this end in soft lockups, with CPUs reported stuck for 21-48s. Walk both lists from the oldest end and move every scanned inode to the newest end, so the next pass starts where the previous one stopped and the drain becomes linear. b_attached is unordered, so nobody sees the reorder there. b_dirty_time is ordered by dirtied_when, but the oldest unscanned inode stays at the end move_expired_inodes() picks from, sync takes the whole list regardless of order, and prepared inodes leave the list as soon as the switch work runs and get a new dirtied_time_when on the new wb anyway, so the only inodes left out of order are the ones that can never switch (DAX), and only on the dying wb. | ||||
| CVE-2026-98573 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: skbuff: fix pull-bound underflow in skb_checksum_setup_ipv6() skb_maybe_pull_tail() subtracts skb_headlen(skb) from the unsigned max argument and passes the result to __pskb_pull_tail() as a signed int. The function does not ensure that max is at least skb_headlen(skb). This can happen while parsing IPv6 extension headers when an skb already has a linear area larger than MAX_IPV6_HDR_LEN. Once the parser needs data beyond the linear area, max - skb_headlen(skb) wraps and is converted to a negative delta. __pskb_pull_tail() then passes that negative length to skb_copy_bits(), where it can become a very large copy length. Pass the requested length itself as the pull bound at the three extension-header call sites, so the delta can no longer go negative. | ||||
| CVE-2026-108984 | 1 Geovision Inc. | 1 Gv-asmanager | 2026-10-19 | 7.5 High |
| A vulnerability is in Web Server default connection ports under the process name GeoWebServer.exe . | ||||
| CVE-2026-108983 | 1 Geovision Inc. | 1 Gv-asmanager | 2026-10-19 | 9.8 Critical |
| A vulnerability is in Web Server default connection ports under the process name GeoWebServer.exe . | ||||
| CVE-2026-98486 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ena: fix MMIO read buffer leak on probe failure ena_device_init() initializes the MMIO read mechanism with ena_com_mmio_reg_read_request_init(), which allocates a coherent DMA buffer for MMIO read responses. The normal removal path releases this buffer through ena_com_mmio_reg_read_request_destroy(). However, if ena_probe() fails after ena_device_init() succeeds, the error path destroys the admin resources and eventually frees ena_dev without destroying the MMIO read request, leaving the coherent DMA buffer allocated. Call ena_com_mmio_reg_read_request_destroy() in the probe error path before releasing the remaining device resources. This issue was found by manual code inspection. | ||||
| CVE-2026-112036 | 1 Artifex | 1 Mupdf | 2026-10-19 | 4.3 Medium |
| A vulnerability was detected in Artifex MuPDF up to 1.28.5. This impacts the function free_char_list of the file source/pdf/pdf-xref.c of the component Signature Locking. Performing a manipulation results in double free. The attack may be initiated remotely. The exploit is now public and may be used. The patch is named 3984925b660afb8a781ddf504021e91be1bc671e. To fix this issue, it is recommended to deploy a patch. | ||||
| CVE-2026-112035 | 1 Aircheng-org | 1 Iwebshop-5 | 2026-10-19 | 6.3 Medium |
| A security vulnerability has been detected in aircheng-org iWebShop-5 up to 5.16. This affects the function send_message_mobile of the file controllers/simple.php. Such manipulation of the argument user_id leads to weak password recovery. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-98508 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: fix NULL pointer dereference on fence allocation failure virtio_gpu_fence_alloc() can fail due to memory pressure and return NULL, but its caller like virtio_gpu_init_submit() never checks it. Later, virtio_gpu_init_submit() passes the NULL fence to virtio_gpu_fence_event_create(), which unconditionally dereferences it. Found when fuzzing the virtio driver with Syzkaller: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000012: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097] CPU: 1 UID: 0 PID: 9991 Comm: syz.0.121 Not tainted 7.2.0 #4 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 RIP: 0010:virtio_gpu_fence_event_create drivers/gpu/drm/virtio/virtgpu_submit.c:295 [inline] RIP: 0010:virtio_gpu_init_submit drivers/gpu/drm/virtio/virtgpu_submit.c:398 [inline] RIP: 0010:virtio_gpu_execbuffer_ioctl+0xc78/0x1aa0 drivers/gpu/drm/virtio/virtgpu_submit.c:505 Code: 85 ed 0f 85 21 09 00 00 e8 05 5a c9 fb 48 8b 44 24 10 48 8d b8 90 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9a 0d 00 00 48 8b 44 24 10 4c 89 b0 90 00 00 00 RSP: 0018:ffffc900039dfad0 EFLAGS: 00010216 RAX: dffffc0000000000 RBX: ffffc900039dfdd8 RCX: ffffffff85f6fd3d RDX: 0000000000000012 RSI: ffffffff85f6fd4b RDI: 0000000000000090 RBP: 0000000000000000 R0virtio_gpu_virgl_process_cmd: ctrl 0x102, error 0x1203 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880132c4000 R13: 0000000000000000 R14: ffff888073b6c700 R15: 000000000000003b FS: 00007fab480b96c0(0000) GS:ffff8880eb6e9000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007effbf5e55a8 CR3: 0000000048d19000 CR4: 0000000000350ef0 Call Trace: <TASK> drm_ioctl_kernel+0x1f4/0x3e0 drivers/gpu/drm/drm_ioctl.c:817 drm_ioctl+0x5f4/0xc70 drivers/gpu/drm/drm_ioctl.c:914 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fab471a82bd Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fab480b9018 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fab47435fa0 RCX: 00007fab471a82bd RDX: 00002000000000c0 RSI: 00000000c0406442 RDI: 0000000000000003 RBP: 00007fab480b9080 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 00007fab47436038 R14: 00007fab47435fa0 R15: 00007ffe85ab0740 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:virtio_gpu_fence_event_create drivers/gpu/drm/virtio/virtgpu_submit.c:295 [inline] RIP: 0010:virtio_gpu_init_submit drivers/gpu/drm/virtio/virtgpu_submit.c:398 [inline] RIP: 0010:virtio_gpu_execbuffer_ioctl+0xc78/0x1aa0 drivers/gpu/drm/virtio/virtgpu_submit.c:505 Code: 85 ed 0f 85 21 09 00 00 e8 05 5a c9 fb 48 8b 44 24 10 48 8d b8 90 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9a 0d 00 00 48 8b 44 24 10 4c 89 b0 90 00 00 00 RSP: 0018:ffffc900039dfad0 EFLAGS: 00010216 RAX: dffffc0000000000 RBX: ffffc900039dfdd8 RCX: ffffffff85f6fd3d RDX: 0000000000000012 RSI: ffffffff85f6fd4b RDI: 0000000000000090 RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880132c4000 R13: 0000000000000000 R14: ffff888073b6c700 R15: 000000000000003b FS: 00007fab480b96c0(0000) GS:ffff888098ae9000(0000) knlGS:00000000 ---truncated--- | ||||
| CVE-2026-98843 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfs: zero gaps in read-gaps folio to avoid writing back stale data netfs_read_gaps() leaves gaps around a streaming write's dirty region unread on the server side, so a short/EOF response there left stale folio content that later got written back. Zero it after the read completes, not before: netfs_wait_for_read() returns rreq->transferred once ret >= 0, so build an iterator over the same bvec array the read used, advance past ret, and zero the rest. The dirty region already maps to sink pages in that array rather than the real folio, so this can't touch it, and only the actual shortfall gets zeroed instead of the whole gap upfront. | ||||
| CVE-2026-112111 | 1 Bootstrap Shortcodes Project | 1 Bootstrap Shortcodes | 2026-10-19 | N/A |
| The Bootstrap Shortcodes plugin for WordPress before 3.4.6 is vulnerable to stored XSS via the id attribute of the [bs_tcontent] shortcode. The bs_tcontent() shortcode handler in inc/bs_tabs.php emits the id attribute value into an unquoted HTML attribute. esc_attr() is applied, but it does not encode space characters, so a space in the supplied value terminates the attribute and any following text is parsed as additional HTML attributes, including JavaScript event handlers. This allows authenticated attackers with Contributor-level access and above to inject arbitrary web script that executes in the browser of any user who views the page and interacts with the injected element. | ||||
| CVE-2026-112112 | 1 Nic | 1 Bird | 2026-10-19 | N/A |
| An IPv6 FlowSpec validation bypass in the CZ.NIC BIRD Internet Routing Daemon allows an established BGP peer to inject FlowSpec rules matching destinations outside the address space authorized by the unicast-route validation procedure. With validation enabled on the receiving flow6 channel, BIRD fails to reject a destination prefix component with a nonzero offset, contrary to RFC 8956 section 5. It validates a reconstructed prefix with zero-filled skipped bits, although the original FlowSpec component can match a broader set of IPv6 addresses. Given a suitable unicast route from the peer, the rule can pass validation and, where export policy permits, be propagated to downstream peers. Downstream enforcement may cause unauthorized traffic filtering or redirection. | ||||
| CVE-2026-111884 | 2 Phpmyfaq, Thorsten | 2 Phpmyfaq, Phpmyfaq | 2026-10-19 | 8.3 High |
| phpMyFAQ before 4.1.9 and 4.2.0-alpha before 4.2.0-beta does not require the current password when changing an account e-mail in the user control panel (UserController::updateData, api/user/data/update), checking only the session and CSRF token. An attacker with a hijacked session can set the e-mail to their own mailbox and use the password-reset flow to take over non-2FA accounts, including superadmin. | ||||
| CVE-2026-111887 | 2 Phpmyfaq, Thorsten | 2 Phpmyfaq, Phpmyfaq | 2026-10-19 | 5.3 Medium |
| phpMyFAQ before 4.1.9 and 4.2.0-alpha before 4.2.0-beta contains an account enumeration vulnerability that allows unauthenticated attackers to confirm registered display names and emails via a distinct HTTP 409 response. Attackers can submit guest comments to the comment create endpoint with candidate user and mail values to link names to emails for targeted phishing. | ||||
| CVE-2026-112034 | 1 Aircheng-org | 1 Iwebshop-5 | 2026-10-19 | 4.3 Medium |
| A weakness has been identified in aircheng-org iWebShop-5 up to 5.16. The impacted element is the function IController::redirect of the file plugins/_userInfo/_userInfo.php of the component Login Redirect. This manipulation of the argument callback causes open redirect. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-98463 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Derive SCX_RQ_IN_WAKEUP from the core enqueue flags schedule_deferred_locked() skips scheduling a deferred action while SCX_RQ_IN_WAKEUP is set and relies on the task_woken_scx() call that follows a wakeup enqueue to run it. enqueue_task_scx() sets the flag from the merged enqueue flags, which include the flags stashed for a remote activation. move_remote_task_to_local_dsq() thus sets SCX_RQ_IN_WAKEUP on the destination rq when the moved task was woken up, although no task_woken_scx() follows that activation. An IMMED insert into a busy destination requests a local reenqueue during that enqueue. The request gets linked but not scheduled and stays pending until an unrelated wakeup or preemption on that CPU runs the deferred actions. The IMMED task sits behind the running task in the meantime. If nothing runs them before the scheduler is disabled, the request outlives the scheduler and points into its freed per-cpu area, which the next scheduler dereferences from run_deferred(). Test the core enqueue flags for the wakeup bit. Only the core's wakeup path is followed by task_woken_scx(). | ||||
| CVE-2026-98481 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: port100: reject frames whose declared length exceeds the received data port100_recv_response() passes the URB transfer buffer to port100_rx_frame_is_valid(), which checksums le16_to_cpu(frame->datalen) bytes of frame->data. datalen is a 16-bit field supplied by the device and is never checked against the number of bytes actually received (urb->actual_length), so a device reporting a datalen larger than the received frame makes port100_data_checksum() read out of bounds past the transfer buffer. Reject a response whose declared frame size does not fit the received length before validating it. Found by 0sec (https://0sec.ai) using automated source analysis; the missing bound is evident from source. Compile-tested. | ||||
| CVE-2026-98497 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: fix swapped IPv6 IPsec policy masks IPv6 XFRM policies may use different source and destination prefix lengths. mlx5e_ipsec_policy_mask() builds the corresponding masks independently, but setup_fte_addr6() installs each mask in the opposite address field. When the prefix lengths differ, this makes the source match use the destination prefix and the destination match use the source prefix. The resulting hardware rule can both miss traffic covered by the policy and match traffic outside it. Install each mask in its corresponding match field. | ||||
| CVE-2026-98512 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: RCU-free the scheduler-containing nouveau_sched struct nouveau_sched embeds a struct drm_gpu_scheduler (base). nouveau_sched_destroy() calls nouveau_sched_fini() (which does drm_sched_fini(&sched->base)) and then frees the object with plain kfree(sched). drm_sched_fence_get_timeline_name() returns fence->sched->name, and the scheduler fence keeps a .release callback so it is not ops-detached on signalling. A finished fence exported to userspace via drm_syncobj / sync_file therefore keeps pointing at &sched->base after nouveau_sched_destroy(), and a later get_timeline_name() -- reachable unprivileged through SYNC_IOC_FILE_INFO -- dereferences freed memory (KASAN slab-use-after-free read). Per the dma-fence lifetime contract the exporter must keep the data backing a signalled fence alive for an RCU grace period. Free the scheduler-containing object with kfree_rcu() instead of kfree(). | ||||
| CVE-2026-98514 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: Fix gem reference leak in validate_init() On the ttm_bo_reserve() failure and "vma not found" error paths, the loop breaks without adding the looked-up object to any validate list, so the reference taken by drm_gem_object_lookup() is never released; validate_fini() only walks the spliced lists. Drop the reference before breaking out on both paths. | ||||