Export limit exceeded: 413197 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (413197 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98717 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Bail from shadow walks if the root is invalid or a dummy When walking shadow page tables, immediately terminate the walk if the root is a "dummy" root, i.e. a root whose top-level page table is backed by the zero page, but otherwise doesn't exist. If memslot creation races with a stage-2 page fault (EPT violation or #NPF) from L2, then if the stars align, KVM will attempt to walk shadow page tables using the zero page and hit a NULL pointer deref. BUG: kernel NULL pointer dereference, address: 0000000000000021 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP CPU: 30 UID: 1000 PID: 941 Comm: qemu Not tainted 7.2.0-rc2-1b731e5ded48-next-vm #1741 PREEMPTLAZY Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:__kvm_mmu_invalidate_addr+0xea/0x210 [kvm] Call Trace: <TASK> kvm_mmu_invalidate_addr+0x92/0xe0 [kvm] __kvm_inject_emulated_page_fault+0x67/0x80 [kvm] ept_page_fault+0x160/0x850 [kvm] kvm_mmu_do_page_fault+0x102/0x1f0 [kvm] kvm_mmu_page_fault+0x8e/0x6b0 [kvm] vmx_handle_exit+0x163/0x640 [kvm_intel] kvm_arch_vcpu_ioctl_run+0x960/0x2120 [kvm] kvm_vcpu_ioctl+0x2c7/0x970 [kvm] __x64_sys_ioctl+0x90/0xd0 do_syscall_64+0x67/0x5f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f606d0b53bb Opportunistically harden the shadow walks against fully invalid roots, but WARN, as all callers are expected/required to pre-check for a valid root. Don't WARN in the dummy root case as the whole point of using a dummy root is to provide a root that's valid enough to enter the guest, i.e. it should Just Work for all flows except those that *need* to know about dummy roots. Alternatively, KVM could allocate a dedicated page and associated shadow page structure for the dummy root, which is very tempting as it such an approach should be more resilient against unexpected behavior. But that would be a much larger and thus riskier change than simply terminating walks of dummy roots. | ||||
| CVE-2026-98716 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Use the active VMCB's MSR bitmap when checking if MSR is intercepted Use the MSR permission bitmap of the active VMCB instead of assuming that KVM is always using vmcb02's bitmap when L2 is active, as KVM uses msrpm02 if and only if L1 wants to intercept MSR accesses, i.e. if and only if KVM needs to merge msprm01 with msrpm12. Don't bother tracking the virtual address of the bitmap that's being used, as __va() is cheap on x86, and caching the virtual address would introduce yet another source of potentially stale information. | ||||
| CVE-2026-98711 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cw1200: fix TX padding OOB read leaking heap data to device The TX path rounds the transfer size up to the bus alignment (align_size(), up to 511 bytes for SDIO, 1 byte for SPI) but sends the padded length straight from the frame buffer, which has no room reserved for the padding. cw1200_data_write() therefore reads past the end of the frame and the bus transfer carries those bytes to the device. A bogus device can collect up to 511 bytes of kernel heap data per TX frame. The RX path does not have this problem: it allocates the skb with the aligned length (alloc_len) before reading. Compute the exact padding with the bus align_size() callback, make sure queued TX frames have tailroom for it, and zero the padding bytes before the transfer so nothing past the frame is exposed. This is not expected to change driver behavior on most cases: frame contents and transfer sizes are unchanged, only the content of the padding bytes (previously undefined stale memory, now zero), which the device never reads since the WSM header carries the real frame length. The skb expansion can only fail under memory exhaustion, in which case the frame is dropped like on the existing error paths of cw1200_tx(). Discovered by Atuin - Automated Vulnerability Discovery Engine. | ||||
| CVE-2026-98710 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlegacy: 3945: free EEPROM data on remove il3945_pci_probe() calls il_eeprom_init(), which allocates memory for the EEPROM data. The probe failure paths release this allocation with il_eeprom_free(), but the remove path does not free it after a successful probe. As a result, the EEPROM data is leaked when the PCI device is removed. Free the EEPROM data in il3945_pci_remove() before releasing the mac80211 hardware structure. This issue was found by manual code inspection. | ||||
| CVE-2026-98708 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: keep paired old chanctx alive An in-place replacement keeps reciprocal replace_ctx pointers between the old WILL_BE_REPLACED chanctx and the new REPLACES_OTHER chanctx. However, the early free paths only consider assigned and reserved link users when deciding whether to free the old chanctx. That lets the old chanctx be freed too early while the replacement partner still points back to it, either when the last assigned link is released or when that link successfully reassigns to another existing context. Later unreserve and switch-finalization paths can then follow a stale replace_ctx pointer. Keep a paired old chanctx alive until the replacement pair has been torn down. Apply the same check to both __ieee80211_link_release_channel() and ieee80211_link_use_reserved_reassign(). If the replacement is later abandoned, ieee80211_link_unreserve_chanctx() already tears down the pairing before freeing the old chanctx once no users remain. | ||||
| CVE-2026-98707 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: shut down RX BA session timer on teardown Tearing down an RX BA session can leave the session timer queued on a freed tid_rx. Later timer-wheel processing and the timer callback itself then run against freed memory. An RX BAR handler can dereference tid_rx under RCU before teardown unpublishes it and stay in its read-side critical section while teardown deletes the session timer. The stale handler can then rearm the timer after timer_delete_sync() returns and before the RCU callback frees tid_rx. Use timer_shutdown_sync() so rearm attempts become ineffective once teardown starts. Keep reorder_timer unchanged: teardown marks the session removed under reorder_lock and its release path checks that state before rearming. session_timer has no equivalent guard because ieee80211_rx_h_ctrl() rearms it before taking reorder_lock. | ||||
| CVE-2026-98706 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: drain PS delivery work during station teardown Removing an AP or mesh station can notify the driver and wake TXQs after the station has already been removed from the driver, and can update num_sta_ps and the power-save queues after station cleanup has purged them. sta_deliver_ps_frames() tests sta->dead only before it starts delivery. A worker that passes that test can be delayed while teardown sets sta->dead and removes the station from the driver; when it resumes it still runs the full delivery. The existing cancel_work_sync() sits near the end of __cleanup_single_sta(), after the final driver state transition and after PS accounting and queue purging, so it drains the worker only once the state it has to protect has already changed. Before commit d34ba2168a3c ("mac80211: don't delay station destruction") cleanup was deferred through the same ordered workqueue as the delivery work, which kept the two ordered. Cancel the work after setting sta->dead and before moving the driver state, and move the existing cancellation to the start of __cleanup_single_sta(). The first drain closes the driver-lifetime window; driver callbacks during the remaining state transitions can still queue drv_deliver_wk through ieee80211_sta_block_awake(), so retain the second drain at the start of __cleanup_single_sta(). That drain also covers insertion failures, which reach cleanup without setting sta->dead. | ||||
| CVE-2026-98696 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: fix driver deregistration order USB serial driver modules register one driver for the USB bus and one or more drivers for the ports on the USB serial bus. When unloading a driver module, the USB driver must be deregistered before the USB serial bus drivers so that I/O is stopped before unbinding the ports to avoid use-after-free in completion handlers accessing port data. Note that the "new_id" attributes must first be removed to prevent new ids from being added and triggering a probe of the USB driver after it has been deregistered. | ||||
| CVE-2026-98662 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: light: gp2ap020a00f: drain irq_work after free_irq The threaded IRQ handler queues data->work through irq_work_queue() so the trigger is polled from a per-CPU context. free_irq() does not flush an irq_work the handler already queued, so after gp2ap020a00f_remove() returns that work may still run and call iio_trigger_poll() on data->trig, which the devm cleanup has already freed, causing a use-after-free. Add irq_work_sync(&data->work) after free_irq() in remove() and in the probe error path, mirroring commit 78601726d4a5 ("iio: trigger: sysfs: fix use-after-free on remove"). Found by an in-house static analysis tool, confirmed by manual review. | ||||
| CVE-2026-98549 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tcp: prevent collapsing skbs across boundary in rtx queue tcp_write_collapse_fence() sets TCP_SKB_CB(skb)->eor = 1 on tcp_write_queue_tail(sk) to prevent skbs queued after a switch to device encryption from being collapsed into earlier skbs. The fence is a no-op if all earlier data has already been transmitted when the switch happens: sk->sk_write_queue is empty. The not yet acknowledged earlier skbs wait in sk->tcp_rtx_queue with eor 0. On a subsequent retransmit or SACK shift, tcp_retrans_try_collapse() or tcp_shift_skb_data() can then merge an skb queued after the switch into one queued before it. Both users of the fence are affected: - psp: devices only encrypt skbs with skb->decrypted set. The merged skb keeps decrypted = 0 from the earlier skb, so merged data sent after psp_sock_assoc_set_tx() is retransmitted in cleartext. - tls device offload: the merged skb straddles the start marker set in tls_set_device_offload(). The software fallback (fill_sg_in() returns -EINVAL) and the mlx5, nfp and funeth drivers cannot handle such an skb and drop it. Every retransmit rebuilds the same skb, so the connection stalls. Fix this in two places, for defense in depth: 1. Fall back to tcp_rtx_queue_tail(sk) in tcp_write_collapse_fence() when tcp_write_queue_tail(sk) is NULL. 2. Check !skb_cmp_decrypted(to, from) in tcp_skb_can_collapse(), as tcp_skb_can_collapse_rx() does on receive. skb_shift(), which both collapse paths call, already has a DEBUG_NET_WARN_ON_ONCE() for this condition. | ||||
| CVE-2026-98544 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bna: prevent IOC timer rearm during teardown bna: prevent IOC timer rearm during teardown bnad_pci_remove() and the probe disable_ioceth path call timer_delete_sync() for ioc_timer, sem_timer and hb_timer, but not for iocpf_timer. bnad_iocpf_timeout() then takes bnad->bna_lock after free_netdev() has freed the struct bnad. Deleting iocpf_timer last does not fix this. sem_timer and iocpf_timer rearm each other: bnad_iocpf_sem_timeout() can arm iocpf_timer, and bnad_iocpf_timeout() arms sem_timer from bfa_ioc_hw_sem_get() when the semaphore is busy. timer_delete_sync() only waits out its own callback. bnad_ioceth_disable() can time out and leave that callback live. Shut all four IOC timers down with timer_shutdown_sync() on both paths, so a later mod_timer() is ignored. This issue was identified during our ongoing static-analysis research while reviewing kernel code. | ||||
| CVE-2026-98517 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/uvmm: fix UAF in nouveau_uvmm_sm when BO is in TTM_PL_SYSTEM nouveau_uvmm_sm() calls op_map(), which passes bo->resource through nouveau_mem() to nouveau_uvma_map(). nouveau_uvmm_vmm_map() then reads mem->mem.type. But this is only valid when bo->resource is backed by struct nouveau_mem, as is the case for VRAM and TT resources. If the BO is left in TTM_PL_SYSTEM, bo->resource is only a struct ttm_resource. Treating it as struct nouveau_mem makes the mem->mem.type read past the end of the resource, causing a KASAN: slab-use-after-free Read in nouveau_uvmm_sm report: BUG: KASAN: slab-use-after-free in nouveau_uvmm_vmm_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:152 [inline] BUG: KASAN: slab-use-after-free in nouveau_uvma_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:199 [inline] BUG: KASAN: slab-use-after-free in op_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:849 [inline] BUG: KASAN: slab-use-after-free in nouveau_uvmm_sm.constprop.0+0x6ab/0x900 drivers/gpu/drm/nouveau/nouveau_uvmm.c:903 Read of size 1 at addr ffff888127d3e3a0 by task kworker/0:1/11 CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 7.2.0 #5 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: nouveau_sched_wq_2224 drm_sched_run_job_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x95/0xe0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcb/0x5a0 mm/kasan/report.c:482 kasan_report+0xca/0x100 mm/kasan/report.c:595 nouveau_uvmm_vmm_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:152 [inline] nouveau_uvma_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:199 [inline] op_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:849 [inline] nouveau_uvmm_sm.constprop.0+0x6ab/0x900 drivers/gpu/drm/nouveau/nouveau_uvmm.c:903 nouveau_uvmm_sm_unmap drivers/gpu/drm/nouveau/nouveau_uvmm.c:932 [inline] nouveau_uvmm_bind_job_run+0xd6/0x250 drivers/gpu/drm/nouveau/nouveau_uvmm.c:1532 nouveau_job_run drivers/gpu/drm/nouveau/nouveau_sched.c:350 [inline] nouveau_sched_run_job+0x62/0xd0 drivers/gpu/drm/nouveau/nouveau_sched.c:364 drm_sched_run_job_work+0x356/0xa10 drivers/gpu/drm/scheduler/sched_main.c:1061 process_one_work+0x8a5/0x1900 kernel/workqueue.c:3322 process_scheduled_works kernel/workqueue.c:3405 [inline] worker_thread+0x5dd/0xd80 kernel/workqueue.c:3486 kthread+0x31d/0x420 kernel/kthread.c:436 ret_from_fork+0x662/0x940 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Allocated by task 2224 on cpu 0 at 66.550027s: kasan_save_stack+0x24/0x50 mm/kasan/common.c:57 kasan_save_track+0x17/0x60 mm/kasan/common.c:78 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __do_kmalloc_node mm/slub.c:5334 [inline] __kmalloc_noprof+0x304/0x7c0 mm/slub.c:5359 _kmalloc_noprof include/linux/slab.h:992 [inline] dma_resv_list_alloc+0x27/0x90 drivers/dma-buf/dma-resv.c:106 dma_resv_reserve_fences+0x60e/0xa30 drivers/dma-buf/dma-resv.c:205 ttm_bo_alloc_resource+0x12c/0xbd0 drivers/gpu/drm/ttm/ttm_bo.c:721 ttm_bo_validate+0x1bc/0x4a0 drivers/gpu/drm/ttm/ttm_bo.c:856 ttm_bo_init_reserved+0x2c3/0x570 drivers/gpu/drm/ttm/ttm_bo.c:970 nouveau_bo_init+0x159/0x2c0 drivers/gpu/drm/nouveau/nouveau_bo.c:359 nouveau_gem_new+0x234/0x5f0 drivers/gpu/drm/nouveau/nouveau_gem.c:272 nouveau_gem_ioctl_new+0x1eb/0x420 drivers/gpu/drm/nouveau/nouveau_gem.c:352 drm_ioctl_kernel+0x192/0x350 drivers/gpu/drm/drm_ioctl.c:817 drm_ioctl+0x4f8/0xb40 drivers/gpu/drm/drm_ioctl.c:914 nouveau_drm_ioctl+0xea/0x2c0 drivers/gpu/drm/nouveau/nouveau_drm.c:1338 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x180/0x1d0 fs/ioctl.c:583 do_syscall_x64 ar ---truncated--- | ||||
| CVE-2026-98507 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/rmap: fix missing barrier between anon_vma init and vma->anon_vma publish On arm64 server, we find that a task trying to grab the anon_vma lock triggers hungtask. INFO: task main:2354726 blocked for more than 120 seconds. Tainted: G E 5.10.0-0021.aarch64 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:main state:D stack: 0 pid:2354726 ppid:2350673 flags:0x00000a01 Call trace: __switch_to+0x7c/0xbc __schedule+0x3b4/0x8a0 schedule+0x50/0xe0 rwsem_down_write_slowpath+0x3cc/0x6cc down_write+0x60/0x260 __anon_vma_prepare+0x6c/0x210 do_anonymous_page+0x258/0x660 handle_pte_fault+0x188/0x214 __handle_mm_fault+0x1b0/0x380 handle_mm_fault+0xf4/0x284 do_page_fault+0x19c/0x494 do_translation_fault+0xcc/0xf8 do_mem_abort+0x48/0xac el0_da+0x44/0x80 el0_sync_handler+0x88/0xb4 el0_sync+0x160/0x180 After analyzing the vmcore, we found the anon_vma->root->rwsem.count is -1. There is another anon_vma whose anon_vma->root->rwsem.count is 1, the anon_vma->root->rwsem.owner shows the lock is held, but the stack of the task shows the task doesn't hold the anon_vma lock. After adding more debugging info, we found __anon_vma_prepare() reuses anon_vma and triggers the UAF of anon_vma->root due to missing memory barrier, leading to locking and unlocking two different anon_vma->root, thus leading to an anon_vma will never be unlocked, and another anon_vma couldn't be locked anymore. This race requires two adjacent VMAs that are not merged but are anon_vma-compatible (e.g., they differ in VMA_ACCESS_FLAGS that can be changed by mprotect()). Two threads fault on each VMA concurrently, both calling __anon_vma_prepare() with only mmap_lock held for reading. THREAD A THREAD B __anon_vma_prepare __anon_vma_prepare find_mergeable_anon_vma() -> NULL anon_vma = anon_vma_alloc(); anon_vma->root = anon_vma; // the two stores may be reordered vma->anon_vma = anon_vma; // finds A's anon_vma anon_vma = find_mergeable_anon_vma(vma); anon_vma_lock_write(anon_vma); // may still see the old root down_write(&anon_vma->root->rwsem); anon_vma_unlock_write(anon_vma); // see the new root, never unlock old up_write(&anon_vma->root->rwsem); thread A triggers page fault and calls __anon_vma_prepare() to prepare anon_vma for the faulting vma. __anon_vma_prepare() allocates and initializes a new anon_vma, and then publishes it to the vma with a plain store. anon_vma_prepare() only requires the mmap_lock to be held for reading, so two threads can fault on adjacent VMAs at the same time. While thread A publishes a new anon_vma, thread B could find the anon_vma via find_mergeable_anon_vma() and then locks anon_vma->root->rwsem. The store to anon_vma->root in anon_vma_alloc() and the store to vma->anon_vma can be reordered. The anon_vma_lock_write() and spin_lock() only provide acquire semantics, which do not prevent prior stores from being reordered after them. The release semantics of the corresponding spin_unlock() and anon_vma_unlock_write() come too late, the store to vma->anon_vma is already published before they take effect. As a result, thread B can observe the following order: vma->anon_vma = anon_vma; anon_vma->root = anon_vma; The anon_vma slab is SLAB_TYPESAFE_BY_RCU, so a newly allocated anon_vma may reuse memory from a previously freed one. The constructor (anon_vma_ctor) does not reset anon_vma->root, and __put_anon_vma() doesn't clear it either, so the old root value persists until anon_vma_alloc() overwrites it. If that store isn't v ---truncated--- | ||||
| CVE-2026-98505 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 1.9 Low |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/vaddr: avoid hw-driven pte updates during damon_hugetlb_mkold() damon_hugetlb_mkold() reads the page table entry into a local variable, unsets the accessed bit in the variable, and updates the page table entry with the updated variable value. If hardware updates the same page table entry in parallel, the hw updates could be lost. For example, hardware-updated dirty bits might be lost. Avoid the parallel updates by clearing the page table entry when reading it together, using huge_ptep_get_and_clear(). If a parallel write to the memory is made after the clearing, the hw will see the page table entry is cleared, trigger page fault and wait until it is handled. The page fault handling will wait for damon_hugetlb_mkold() due to the page table lock. Because hugetlbfs is an in-memory file system and hugetlb pages cannot be reclaimed, no critical issue is expected to my best knowledge. But definitely this is a nasty bug that should be fixed sooner rather than later. The issue was discovered [1] by Sashiko. | ||||
| CVE-2026-98502 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: HID: alps: unregister DualPoint Stick input device on remove alps_input_configured() allocates a second input device ("DualPoint Stick") with input_allocate_device() and registers it, but the alps_driver struct has no .remove handler and input2 is not tracked in hdev->inputs. The default remove path (hid_hw_stop -> hidinput_disconnect) only iterates hdev->inputs, so input2 is never unregistered and leaks on every device removal. Add a .remove handler that stops the device first (preventing URB callbacks from touching input2 during teardown) and then unregisters input2. | ||||
| CVE-2026-98493 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ipconfig: bound DHCP option construction ic_dhcp_init_options() appends the hostname (option 12), vendor-class (option 60) and client-ID (option 61) options into the fixed 312-byte bootp_pkt.exten[] buffer. Only the client-ID branch checked the remaining space; the hostname and vendor-class writes were unbounded. A 64-byte hostname together with the maximum 252-byte dhcpclass= identifier needs 18 + (2 + 64) + (2 + 252) = 338 of the 312 available bytes even before the terminating END marker, so the vendor-class memcpy runs past the end of exten[]. With CONFIG_FORTIFY_SOURCE this is reported as a field-spanning write and, when the kernel is booted with panic_on_warn=1, aborts boot with a panic. Route the optional options through a common helper that makes sure the option, its 2-byte header and the END marker all fit and drops an option that would not. Configurations with short options keep sending exactly the same bytes as before. | ||||
| CVE-2026-98490 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: conntrack: fix helper UAF due to extensions realloc While calling the helpers, a raw pointer to the extensions area is wired into expectations list: -> nf_ct_helper() -> helper->help() -> nf_ct_expect_related_report() -> nf_ct_expect_insert() -> hlist_add_head_rcu(&exp->lnode, &master_help->expectations) In case the connection is not confirmed yet, more extensions can be added afterwards with *_ext_add() calls reallocating the extension space and leaving the now invalid pointer in the expectations list that is later accessed while removing the expectation. Make sure that helpers are called at the end after all the other extensions are already added. Note that the helper rejection now leaves the mark and labels set, but that's not different from how the NAT was handled before or how the mark and the labels were handled on confirmation failure. And there are no atomicity guarantees provided by the API anyway. | ||||
| CVE-2026-98486 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 1.9 Low |
| In the Linux kernel, the following vulnerability has been resolved: net: ena: fix MMIO read buffer leak on probe failure ena_device_init() initializes the MMIO read mechanism with ena_com_mmio_reg_read_request_init(), which allocates a coherent DMA buffer for MMIO read responses. The normal removal path releases this buffer through ena_com_mmio_reg_read_request_destroy(). However, if ena_probe() fails after ena_device_init() succeeds, the error path destroys the admin resources and eventually frees ena_dev without destroying the MMIO read request, leaving the coherent DMA buffer allocated. Call ena_com_mmio_reg_read_request_destroy() in the probe error path before releasing the remaining device resources. This issue was found by manual code inspection. | ||||
| CVE-2026-98484 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 3.4 Low |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: skip expired catchall elements on insert and delete nft_setelem_catchall_insert() looks up duplicates with nft_set_elem_active() only, while nft_set_catchall_lookup() and the dump path additionally skip expired elements. Once a catchall element with a timeout expires, this predicate drift makes it invisible to userspace dumps, yet it still blocks re-insertion: with NLM_F_EXCL the request fails with -EEXIST, and without it the request reports success but silently inserts nothing. The stale entry only goes away when the (user-tunable) gc interval elapses, so the catchall rule may silently stop matching for an arbitrarily long time after its first expiration. The delete path shows the same drift: nft_setelem_catchall_deactivate() picks the first active-next entry in the catchall list, so with an expired entry still pending GC it retires the stale entry instead of the fresh one, and it deactivates an element that userspace no longer sees instead of failing with -ENOENT. Align both walks with the lookup and dump predicates: only an element that is active and not expired counts as a duplicate or delete candidate, using the per-netns timestamp taken at transaction start, in line with the set backend .insert/.deactivate and catchall GC sync paths. | ||||
| CVE-2026-98477 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix NULL pmu_ctx passed to pmu->sched_task() perf_pmu_sched_task() returns early when cpuctx->task_ctx is set, and cpc->task_epc is only non-NULL while a task context is scheduled in on this CPU. __perf_pmu_sched_task() therefore always passes NULL: Unable to handle kernel NULL pointer dereference at virtual address 00 pc : armv8pmu_sched_task+0x14/0x50 Call trace: armv8pmu_sched_task+0x14/0x50 (P) perf_pmu_sched_task+0xac/0x108 __perf_event_task_sched_out+0x6c/0xe0 Pass &cpc->epc instead, the CPU-wide context for this PMU, which the function already dereferences a few lines up to find pmu. armv8pmu_sched_task() is the only in-tree implementation that dereferences the argument, and it only reads ->pmu, so the oops needs BRBE, added in v6.17. | ||||