Description
In the Linux kernel, the following vulnerability has been resolved:
udp: remove a disconnected socket from the 4-tuple hash table
A UDP socket bound to a specific address and port keeps its entry in the
4-tuple hash table after it is disconnected:
sk binds to 127.0.0.1:21001
sk connects to 127.0.0.2:20001 // filed in the 4-tuple table
sk disconnects, connect(AF_UNSPEC) // still filed, peer now 0.0.0.0:0
__udp_disconnect() takes a socket out of that table only as a side effect
of ->rehash() or ->unhash(), and it skips ->rehash() when
SOCK_BINDADDR_LOCK is set and ->unhash() when SOCK_BINDPORT_LOCK is set.
commit 6996a2d2d0a6 ("udp: Unhash auto-bound connected sk from 4-tuple hash
table when disconnected.") fixed the same end state for a wildcard-bound
socket, by a path this one does not take.
The entry is counted whether or not anything hits it. hash4_cnt on the
hash2 slot stays raised for as long as the socket lives, so udp_has_hash4()
keeps sending every packet for that address and port through the 4-tuple
lookup first.
On IPv6 it can also be hit. __udp_disconnect() does not clear sk_v6_daddr,
so udp_v6_rehash() files the entry under the peer the socket was connected
to with a zero dport, and inet6_match() compares that same
field: a datagram from the former peer with a zero source port matches,
and source port zero is accepted on receive. On IPv4 the peer is cleared,
so a match would need a zero source address as well, which the routing
layer rejects as martian. The stale sk_v6_daddr is a separate defect, not
addressed here; removing the entry closes this path either way.
The entry can also be relocated. __udp_disconnect() clears sk_bound_dev_if,
so a subsequent SO_BINDTODEVICE calls ->rehash(), and because the receive
address is still specific udp_lib_rehash() moves the entry instead of
removing it, into the bucket that (rcv_saddr, num, 0, 0) hashes to -- a
pure function of the address and port, so every socket reaching this state
on one address and port collects in one bucket. The bucket cannot be chosen
from outside, as udp_ehashfn() is seeded with a per-boot secret. This last
one became reachable only with commit 644f9108f3a5 ("udp: Make rehash4
independent in udp_lib_rehash()"), which moved the hash4 handling out of a
branch a disconnected socket does not take; the stale entry itself dates
from the commit in Fixes.
Take the socket out of the table before __udp_disconnect() runs, while it
still matches how it was filed. This also reaches the wildcard case ahead
of udp_lib_rehash()'s udp_unhash4() branch, leaving that branch unreachable
from udp_disconnect(); removing it belongs in net-next. udp_disconnect()
and udp_abort() are the only UDP entries into __udp_disconnect(), which is
shared with raw, ping and l2tp sockets that are not struct udp_sock:
ping_prot.obj_size is sizeof(struct inet_sock), so udp_hashed4() on one
would read past the allocation.
udp: remove a disconnected socket from the 4-tuple hash table
A UDP socket bound to a specific address and port keeps its entry in the
4-tuple hash table after it is disconnected:
sk binds to 127.0.0.1:21001
sk connects to 127.0.0.2:20001 // filed in the 4-tuple table
sk disconnects, connect(AF_UNSPEC) // still filed, peer now 0.0.0.0:0
__udp_disconnect() takes a socket out of that table only as a side effect
of ->rehash() or ->unhash(), and it skips ->rehash() when
SOCK_BINDADDR_LOCK is set and ->unhash() when SOCK_BINDPORT_LOCK is set.
commit 6996a2d2d0a6 ("udp: Unhash auto-bound connected sk from 4-tuple hash
table when disconnected.") fixed the same end state for a wildcard-bound
socket, by a path this one does not take.
The entry is counted whether or not anything hits it. hash4_cnt on the
hash2 slot stays raised for as long as the socket lives, so udp_has_hash4()
keeps sending every packet for that address and port through the 4-tuple
lookup first.
On IPv6 it can also be hit. __udp_disconnect() does not clear sk_v6_daddr,
so udp_v6_rehash() files the entry under the peer the socket was connected
to with a zero dport, and inet6_match() compares that same
field: a datagram from the former peer with a zero source port matches,
and source port zero is accepted on receive. On IPv4 the peer is cleared,
so a match would need a zero source address as well, which the routing
layer rejects as martian. The stale sk_v6_daddr is a separate defect, not
addressed here; removing the entry closes this path either way.
The entry can also be relocated. __udp_disconnect() clears sk_bound_dev_if,
so a subsequent SO_BINDTODEVICE calls ->rehash(), and because the receive
address is still specific udp_lib_rehash() moves the entry instead of
removing it, into the bucket that (rcv_saddr, num, 0, 0) hashes to -- a
pure function of the address and port, so every socket reaching this state
on one address and port collects in one bucket. The bucket cannot be chosen
from outside, as udp_ehashfn() is seeded with a per-boot secret. This last
one became reachable only with commit 644f9108f3a5 ("udp: Make rehash4
independent in udp_lib_rehash()"), which moved the hash4 handling out of a
branch a disconnected socket does not take; the stale entry itself dates
from the commit in Fixes.
Take the socket out of the table before __udp_disconnect() runs, while it
still matches how it was filed. This also reaches the wildcard case ahead
of udp_lib_rehash()'s udp_unhash4() branch, leaving that branch unreachable
from udp_disconnect(); removing it belongs in net-next. udp_disconnect()
and udp_abort() are the only UDP entries into __udp_disconnect(), which is
shared with raw, ping and l2tp sockets that are not struct udp_sock:
ping_prot.obj_size is sizeof(struct inet_sock), so udp_hashed4() on one
would read past the allocation.
Published:
2026-10-18
Score:
n/a
EPSS:
n/a
KEV:
No
Impact:
n/a
Action:
n/a
Analysis
Analysis and contextual insights are available on OpenCVE Cloud.
Default status is the baseline for the product, each version can override it (e.g. patched versions marked unaffected).
| Vendor | Product | Default status | Versions | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Linux | Linux | unaffected |
|
||||||||||||||||||
| Linux | Linux | affected |
|
No data.
No data.
No data available yet.
Remediation
No vendor fix or workaround currently provided.
Additional remediation guidance may be available on OpenCVE Cloud.
Tracking
Sign in to view the affected projects.
Advisories
No advisories yet.
References
History
Sun, 18 Oct 2026 15:30:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | In the Linux kernel, the following vulnerability has been resolved: udp: remove a disconnected socket from the 4-tuple hash table A UDP socket bound to a specific address and port keeps its entry in the 4-tuple hash table after it is disconnected: sk binds to 127.0.0.1:21001 sk connects to 127.0.0.2:20001 // filed in the 4-tuple table sk disconnects, connect(AF_UNSPEC) // still filed, peer now 0.0.0.0:0 __udp_disconnect() takes a socket out of that table only as a side effect of ->rehash() or ->unhash(), and it skips ->rehash() when SOCK_BINDADDR_LOCK is set and ->unhash() when SOCK_BINDPORT_LOCK is set. commit 6996a2d2d0a6 ("udp: Unhash auto-bound connected sk from 4-tuple hash table when disconnected.") fixed the same end state for a wildcard-bound socket, by a path this one does not take. The entry is counted whether or not anything hits it. hash4_cnt on the hash2 slot stays raised for as long as the socket lives, so udp_has_hash4() keeps sending every packet for that address and port through the 4-tuple lookup first. On IPv6 it can also be hit. __udp_disconnect() does not clear sk_v6_daddr, so udp_v6_rehash() files the entry under the peer the socket was connected to with a zero dport, and inet6_match() compares that same field: a datagram from the former peer with a zero source port matches, and source port zero is accepted on receive. On IPv4 the peer is cleared, so a match would need a zero source address as well, which the routing layer rejects as martian. The stale sk_v6_daddr is a separate defect, not addressed here; removing the entry closes this path either way. The entry can also be relocated. __udp_disconnect() clears sk_bound_dev_if, so a subsequent SO_BINDTODEVICE calls ->rehash(), and because the receive address is still specific udp_lib_rehash() moves the entry instead of removing it, into the bucket that (rcv_saddr, num, 0, 0) hashes to -- a pure function of the address and port, so every socket reaching this state on one address and port collects in one bucket. The bucket cannot be chosen from outside, as udp_ehashfn() is seeded with a per-boot secret. This last one became reachable only with commit 644f9108f3a5 ("udp: Make rehash4 independent in udp_lib_rehash()"), which moved the hash4 handling out of a branch a disconnected socket does not take; the stale entry itself dates from the commit in Fixes. Take the socket out of the table before __udp_disconnect() runs, while it still matches how it was filed. This also reaches the wildcard case ahead of udp_lib_rehash()'s udp_unhash4() branch, leaving that branch unreachable from udp_disconnect(); removing it belongs in net-next. udp_disconnect() and udp_abort() are the only UDP entries into __udp_disconnect(), which is shared with raw, ping and l2tp sockets that are not struct udp_sock: ping_prot.obj_size is sizeof(struct inet_sock), so udp_hashed4() on one would read past the allocation. | |
| Title | udp: remove a disconnected socket from the 4-tuple hash table | |
| First Time appeared |
Linux
Linux linux Kernel |
|
| CPEs | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* | |
| Vendors & Products |
Linux
Linux linux Kernel |
|
| References |
|
MITRE
Status: PUBLISHED
Assigner: Linux
Published:
Updated: 2026-10-18T15:19:07.840Z
Reserved: 2026-09-25T10:25:14.359Z
Link: CVE-2026-98595
Vulnrichment
No data.
NVD
Status : Received
Published: 2026-10-18T16:17:12.163
Modified: 2026-10-18T16:17:12.163
Link: CVE-2026-98595
Redhat
No data.
OpenCVE Enrichment
No data.
Weaknesses
No weakness.