| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| x64dbg-MCP Server is a native Model Context Protocol (MCP) plugin for x64dbg that exposes the debugger's full functionality over HTTP. Prior to 1.2, src/core/mcp_server.zig parses an unbounded Content-Length value in parseContentLength() and uses it in unchecked usize addition in wsRecv() before token authentication. The server listens on 0.0.0.0 by default in affected versions. An unauthenticated network client can supply a near-maximum Content-Length value to trigger a runtime integer-overflow panic in Debug and ReleaseSafe builds, terminating the entire x64dbg process and its live debugging session. The overflowed value is used only in a comparison, so the impact is limited to denial of service rather than memory corruption or code execution. This issue is fixed in version 1.2. |
| Out-of-bounds read in the compact Theta sketch deserialization of Apache DataSketches C++ (repo: datasketches-cpp).
compact_theta_sketch::deserialize() and wrapped_compact_theta_sketch::wrap() read header fields before checking that the input was long enough. For the compressed format, the size check could be defeated by a 32-bit overflow, and two header fields that control decoding were not validated; this also affected deserialization from a stream. A crafted or truncated sketch could cause a read past the end of the input. In the compressed case the over-read can be large, and the bytes read can become part of the deserialized sketch. This can cause a crash (denial of service) and could expose adjacent memory contents.
This issue affects Apache DataSketches C++: from 3.1.0 before 5.3.0. Only applications that deserialize Theta sketches from untrusted sources are affected.
Users are recommended to upgrade to version 5.3.0, which fixes this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
mm, swap: fix SWAP_USAGE_OFFLIST_BIT collision with real usage count
SWAP_USAGE_OFFLIST_BIT is embedded in the si->inuse_pages usage counter,
and is meant to sit above any value that counter can reach. However, it
is defined from BITS_PER_TYPE(atomic_t), so it is bit 30. On a system
with 4 KiB pages the flag collides with the usage count once that count
reaches 4 TiB.
swap_usage_in_pages() masks bit 30 out, so whenever the real count has
that bit set, every caller of it reads 4 TiB low:
* /proc/swaps understates Used by 4 TiB.
* A raw count of exactly 2^30 masks to zero, so try_to_unuse() takes its
"if (!swap_usage_in_pages(si)) goto success;" early exit and swapoff
tears the device down while pages are still swapped out. Nothing in
the rest of swapoff aborts the teardown, so those pages are lost.
Independently of swapoff, the collision also corrupts the counter and the
plist. On a device in normal use, a free that leaves bit 30 set in the
count makes swap_usage_sub() see the flag where there is only count, and
call add_to_avail_list(). It clears the bit with
fetch_and(~SWAP_USAGE_OFFLIST_BIT), leaving the stored count 4 TiB below
the real one, and calls plist_add() on a device that is already listed,
tripping the WARN_ON(!plist_node_empty(node)) in plist_add() and linking
the node a second time.
Change the definition of SWAP_USAGE_OFFLIST_BIT to be based on
atomic_long_t instead. Note that the usage counter field itself is of
this same type, so it is still a valid bit. |
| dynamic_object_create() in kernel/userspace/userspace.c computed the backing allocation for a dynamically allocated kernel object as obj_size_get(otype) + size, and for thread stack elements as STACK_ELEMENT_DATA_SIZE(size) (a round-up plus fixed overhead), without checking either expression for unsigned wrap-around. A size close to SIZE_MAX makes the computed total wrap to a very small value, so the heap chunk handed out is a few bytes while the object descriptor is still tagged with the full requested type and registered in the kernel object table.
The size argument reaches that arithmetic directly from user mode. k_object_alloc_size() is declared __syscall in include/zephyr/sys/kobject.h, its verifier z_vrfy_k_object_alloc_size() in kernel/userspace/userspace_handler.c is a bare pass-through, and z_object_alloc() only range-checks otype — nothing bounds size. The stack-element branch is additionally reachable through the k_thread_stack_alloc() syscall via kernel/dynamic.c. Because subsequent kernel-object validation checks only the object's type and initialization state, the undersized handle passes K_SYSCALL_OBJ_INIT()/K_SYSCALL_OBJ_NEVER_INIT(), and the matching init syscall (for example k_mutex_init(), k_sem_init(), or k_thread_create()) then writes a complete object over the truncated allocation.
An unprivileged user-mode thread can therefore trigger a supervisor-mode out-of-bounds write into the kernel resource-pool heap, of a size and content it substantially controls, corrupting sys_heap chunk metadata and adjacent kernel objects. Under CONFIG_GEN_PRIV_STACKS the thread-stack branch additionally stores an attacker-influenced wild pointer as a user thread's privileged stack base. The practical result is escape from the CONFIG_USERSPACE sandbox — kernel-level code execution or at minimum kernel memory corruption and system compromise.
Exploitation requires CONFIG_USERSPACE together with CONFIG_DYNAMIC_OBJECTS (also selected by CONFIG_DYNAMIC_THREAD under userspace), and a calling thread with an assigned resource pool. The fix rejects both overflowing computations and frees the partially built descriptor. |
| SumatraPDF is a multi-format reader for Windows. In 3.7.0.22298, LitParseHeader() in src/LitDoc.cpp computes the attacker-controlled hdrLen + nPieces * 16 section offset using signed 32-bit arithmetic without validating the complete result. When the component values make that aggregate calculation overflow to a negative value, pointer construction reaches an invalid read in LitU32(), causing deterministic application termination. The supplied evidence does not demonstrate code execution, information disclosure, arbitrary read, or integrity impact. No fixed version is available as of this review. |
| In display, there is a possible escalation of privilege due to an integer overflow. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11296678; Issue ID: MSV-9167. |
| libmikmod before 3.3.14 contains an integer overflow vulnerability in DSM_Load() in load_dsm.c that allows attackers to trigger heap buffer overflow via crafted track counts. Attackers can supply a DSM module whose numchn and numpat product wraps a 16-bit value, overwriting heap memory to cause crashes or potential code execution. |
| libmikmod before 3.3.14 contains an integer overflow in the Oktalyzer loader OKT_doPBOD() that allows attackers to cause heap buffer overflow via crafted track counts. Attackers can supply an OKT module whose SLEN chunk wraps the 16-bit numtrk value, causing PBOD writes past allocated track pointers for crashes or code execution. |
| VMware Workstation and Fusion contain an integer-overflow vulnerability. A malicious actor with local administrative privileges on a virtual machine with VMXNET3 virtual network adapter may exploit this issue to execute code on the host.
Affected versions:
- VMware Workstation: 25H2, 26H1 (fixed in 26H1u1)
- VMware Fusion: 25H2, 26H1 (fixed in 26H1u1) |
| containerd overlaybd through 1.0.18 has a do_load_index (LSMT index loading) integer overflow (and resultant out-of-bounds heap access) for index_bytes, if an untrusted overlaybd blob from a registry is used in a scenario with multiple overlaybd-backed containers. |
| An exploitable denial-of-service vulnerability exists in the TXT record-parsing functionality of Videolabs libmicrodns 0.1.0. When parsing the RDATA section in a TXT record in mDNS messages, multiple integer overflows can be triggered, leading to a denial of service. An attacker can send an mDNS message to trigger this vulnerability. |
| Integer Overflow or Wraparound in GitHub repository vim/vim prior to 9.0. |
| There's a flaw in lz4. An attacker who submits a crafted file to an application linked with lz4 may be able to trigger an integer overflow, leading to calling of memmove() on a negative size argument, causing an out-of-bounds write and/or a crash. The greatest impact of this flaw is to availability, with some potential impact to confidentiality and integrity as well. |
| In kernel/bpf/hashtab.c in the Linux kernel through 5.13.8, there is an integer overflow and out-of-bounds write when many elements are placed in a single bucket. NOTE: exploitation might be impractical without the CAP_SYS_ADMIN capability. |
| libpcre in PCRE before 8.44 allows an integer overflow via a large number after a (?C substring. |
| An issue was discovered in GNU libiberty, as distributed in GNU Binutils 2.32. simple_object_elf_match in simple-object-elf.c does not check for a zero shstrndx value, leading to an integer overflow and resultant heap-based buffer overflow. |
| CPython (aka Python) up to 2.7.13 is vulnerable to an integer overflow in the PyString_DecodeEscape function in stringobject.c, resulting in heap-based buffer overflow (and possible arbitrary code execution) |
| An integer overflow during the parsing of XML using the Expat library. This vulnerability affects Firefox < 50. |
| The overflow protection in Expat is removed by compilers with certain optimization settings, which allows remote attackers to cause a denial of service (crash) or possibly execute arbitrary code via crafted XML data. NOTE: this vulnerability exists because of an incomplete fix for CVE-2015-1283 and CVE-2015-2716. |
| An integer overflow in BSON value-length handling in the MongoDB Go Driver can cause a runtime panic when an application validates or accesses a malformed BSON document. An unauthenticated actor who can supply BSON bytes to an affected application may terminate an unprotected application process, causing a denial of service. The driver's server-monitoring path contains panic recovery and is limited to server-selection failure. |
