| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: unwind state on add_interface failure
When mt76_wcid_alloc() fails, mt7915_add_interface() returned without
clearing the vif_mask/omac_mask bits it had already set, without removing
the firmware dev info added earlier, and without clearing a monitor_vif
pointer to the vif mac80211 is about to free. mac80211 does not call
remove_interface() for a failed add, so the indices and firmware dev
entry leaked permanently and testmode could dereference the stale
monitor_vif. Add a proper error unwind. |
| Use after free in Microsoft Edge (Chromium-based) allows an unauthorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
liveupdate: Remember FLB retrieve() status
LUO keeps track of successful retrieve attempts on an FLB. It does so
to avoid multiple retrievals of the same FLB. Multiple retrievals cause
problems because once the FLB is retrieved, the serialized data
structures are likely freed and the FLB is likely in a very different
state from what the code expects.
All this works well when retrieve succeeds. When it fails,
luo_flb_retrieve_one() returns the error immediately, without ever
storing anywhere that a retrieve was attempted or what its error code
was. If the user attempts to retrieve another file registered with the
same FLB, LUO will attempt to call the FLB's retrieve() callback again.
The retry is problematic for much of the same reasons listed above. The
FLB is likely in a very different state than what the retrieve logic
normally expects (e.g. some KHO pages may have already been restored and
freed).
There is no sane way of attempting the retrieve again. Remember the
error retrieve returned and directly return it on a retry.
This is done by changing the retrieved bool to a retrieve_status
integer. A value of 0 means retrieve was never attempted, a positive
value means it succeeded, and a negative value means it failed and the
error code is the value.
This is similar to commit f85b1c6af5bc ("liveupdate: luo_file: remember
retrieve() status") which did the same for LUO files. |
| Vulnerability in Drupal Gammu SMS Daemon. This issue affects Gammu SMS Daemon versions: *.*. |
| Vulnerability in Drupal Gammu SMS Daemon. This issue affects Gammu SMS Daemon versions: *.*. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: qcom: snps-femto-v2: Fix possible NULL-deref on early runtime suspend
Runtime PM must be enabled before creating the PHY, since phy_create()
only enables runtime PM on the PHY device if it is already enabled on
this parent device. However, the runtime PM callbacks dereference the
hsphy instance, which is not yet ready, leaving a window where a suspend
callback may trigger a NULL pointer dereference.
Take a runtime PM usage reference with pm_runtime_get_noresume() before
enabling runtime PM and release it once the PHY has been created, so that
no runtime suspend can run before the PHY is ready. This also prevents a
short window where an unnecessary runtime suspend can occur.
Use the devres-managed version to ensure PM runtime is symmetrically
disabled during driver removal for proper cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
hugetlbfs: release subpool on fill_super failure
hugetlbfs_fill_super() allocates a hugepage subpool when size or min_size
mount options are specified. hugepage_new_subpool() may also reserve huge
pages for min_size.
If root dentry creation fails after the subpool is created, the failure
path frees the subpool with kfree(). This bypasses hugepage_put_subpool()
and can leave min_size reservations charged.
Use hugepage_put_subpool() on the failure path, matching the normal
put_super path. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware_loader: do not queue completed sysfs fallback requests
fw_load_sysfs_fallback() calls device_add() before adding the fw_priv to
pending_fw_head. device_add() publishes the fallback loading interface, so
a userspace helper which discovers the device by scanning sysfs can write 0
to the loading attribute and complete the request before it is queued as
pending.
In that interleaving firmware_loading_store() calls fw_state_done() while
pending_list still points to itself, so it cannot remove an entry from
pending_fw_head. The subsequent unconditional list_add() then queues an
already-completed fw_priv. Once the request is released, pending_fw_head
can retain a pointer to freed memory and the next fallback request can
fault while validating the list.
Only in-flight fallback requests need suspend or reboot abort handling. If
the request is already DONE after device_add(), return success from the
fallback path without sending another uevent, waiting again, or queueing it
as pending. This preserves the invariant that pending_fw_head contains only
active fallback requests. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix sleepable check for tracing/lsm prog
When CONFIG_FUNCTION_ERROR_INJECTION is disabled, a sleepable tracing prog
is allowed to attach to '__x64_'-alike prefix symbols.
It is because the verifier does not verify whether the symbol is a kernel
function or a bpf prog. That said, a sleepable tracing prog is allowed to
attach to a bpf prog target whose name has '__x64_'-alike prefix.
For example, a sleepable fentry prog attaches to a '__x64_sys_nop' XDP
prog, and copies buffer from a user pointer with bpf_copy_from_user()
helper. After attaching the XDP prog to lo interface, the kernel BUG
could be triggered by 'ping -c 1 -W 1 127.0.0.1':
[ 3.460756] BUG: sleeping function called from invalid context at kernel/bpf/trampoline.c:1324
Fix it by disallowing sleepable prog always when its target
btf is not a kernel's btf. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/omap: dsi: Do not copy isr table
To be able to unregister stuff from isrs, the corresponding table was
copied. Nobody seems to unregister stuff that way, so it does not help.
But there are stack-allocated objects passed to these isrs giving chances
of UAF of these objects if irqs are unregistered while they are handled,
so better do not copy that table. |
| In the Linux kernel, the following vulnerability has been resolved:
rapidio: clear mport->net when rio_add_net() fails
rio_alloc_net() stores the newly allocated rio_net in mport->net before
rio_scan_alloc_net() registers the device.
If rio_add_net() fails, rio_scan_alloc_net() drops the device reference
with put_device(), which releases the rio_net through the device release
callback. However, mport->net is left pointing at the freed object.
A later mport unregister path can then dereference the dangling mport->net
pointer and may try to free the same rio_net again.
Clear mport->net in the rio_add_net() failure path, matching the cleanup
done for the destID table allocation failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: check import_ubuf() return value
import_ubuf() can fail if the address range (provided by the userspace
ublk server) is outside the allowed user address space. Return that 0
bytes were copied if import_ubuf() fails rather than passing an
uninitialized struct iov_iter to ublk_copy_user_pages(). |
| In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: skip dying blkg in blkcg_activate_policy()
When switching IO schedulers on a block device, blkcg_activate_policy()
can race with concurrent blkcg deletion, leading to a use-after-free in
rcu_accelerate_cbs.
T1: T2:
blkg_destroy
kill(&blkg->refcnt) // blkg->refcnt=1->0
blkg_release // call_rcu(__blkg_release)
...
blkg_free_workfn
->pd_free_fn(pd)
elv_iosched_store
elevator_switch
...
iterate blkg list
blkg_get(blkg) // blkg->refcnt=0->1
list_del_init(&blkg->q_node)
blkg_put(pinned_blkg) // blkg->refcnt=1->0
blkg_release // call_rcu again
rcu_accelerate_cbs // uaf
Fix this by checking hlist_unhashed(&blkg->blkcg_node) before getting
a reference to the blkg. This is the same check used in blkg_destroy()
to detect if a blkg has already been destroyed. If the blkg is already
unhashed, skip processing it since it's being destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/syscall: Fix syscall skip handling for seccomp and ptrace
After enabling GENERIC_ENTRY on PowerPC, syscall_enter_from_user_mode()
returns -1 as a sentinel to signal that seccomp or ptrace has intercepted
the syscall and already set a return value via syscall_set_return_value().
system_call_exception() was not handling this sentinel, and since -1UL
is >= NR_syscalls, the code fell into the out-of-range path and returned
-ENOSYS, overwriting the errno already placed in regs->gpr[3].
The naive fix of checking r0 == -1L before the NR_syscalls bounds check
is ambiguous: a user legitimately calling syscall(-1) also produces r0 ==
-1L, and a tracer intercepting such a call would have its injected return
value silently discarded.
Fix this by introducing a thread flag that is set whenever
syscall_set_return_value() explicitly updates the return value. In
system_call_exception(), check and clear this flag before dispatching
the syscall, and return the preset value directly when it is present.
This ensures that an explicitly supplied return value always suppresses
syscall execution, regardless of the syscall number.
This handles all seccomp actions correctly:
- SECCOMP_RET_ERRNO, SECCOMP_RET_TRACE (no tracer), SECCOMP_RET_USER_NOTIF:
all call syscall_set_return_value(), flag is set, injected value returned.
- SECCOMP_RET_TRAP, SECCOMP_RET_KILL: call syscall_rollback() and deliver
a signal; flag is not set, but the process is dying so the return value
is irrelevant.
The fix covers both ppc32 and ppc64 with no #ifdefs. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: stop PMSR before P2P and NAN teardown
PMSR request teardown must abort active measurements while the
wireless_dev is still present in the driver. cfg80211_leave_locked() and
cfg80211_stop_pd() already do this before invoking the driver's stop
callback, but cfg80211_stop_p2p_device() and cfg80211_stop_nan() do not.
Those helpers are also called directly by nl80211, rfkill shutdown, and
wireless_dev unregister paths. If one of these paths stops a P2P device
or NAN interface with a pending request, it removes the mac80211
subinterface from the driver first. Subsequent request cleanup cannot
reach the lower driver's abort callback, but cfg80211 frees the request
regardless. Driver state can then retain a stale request and use it when
it later reports a result.
Call cfg80211_pmsr_wdev_down() before stopping the P2P device or NAN
interface. This keeps lower-driver request state and cfg80211 request
ownership in sync for all of the helpers' callers. |
| In the Linux kernel, the following vulnerability has been resolved:
md: recheck spare changes before starting sync
remove_spares() and remove_and_add_spares() modify the array's rdev
configuration. These operations are only safe after the array has been
suspended.
md_start_sync() checks whether spare configuration changes are needed
before taking reconfig_mutex. However, the rdev state can change before
the mutex is acquired, so the initial check can become stale. In that
case, md_choose_sync_action() may remove or replace rdevs while normal
I/O is still accessing them.
The race can occur as follows:
raid10d Worker Normal IO
____________ _______________________ ______________________
raid10_write_request()
wait_blocked_dev()
set Blocked
set Faulty
Skip Faulty rdev
rrdev->nr_pending++
.repl_bio = bio
removeable_rdev = false .
array not suspended .
lock mddev goto err_handle
lock mddev (wait)
.
update sb .
clear Blocked .
.
unlock mddev .
lock mddev (acquires)
remove_spares()
removeable_rdev = true
raid10_remove_disk()
rdev = replacement
replacement = NULL
rdev_dec_pending(NULL)
unlock mddev (NULL)->nr_pending--
In this case, rdev_dec_pending() is called with a NULL pointer,
resulting in a NULL pointer dereference when attempting to decrement
nr_pending.
Fix this by suspending the array when spare configuration changes are
needed, including for non-read-write arrays, and checking again after
taking reconfig_mutex. If the array was not already suspended and a
change is now needed, release the mutex, suspend the array, and
reacquire the mutex before continuing. |
| In the Linux kernel, the following vulnerability has been resolved:
media: bcm2835-unicam: Fix asc leaked in error/remove path
v4l2_async_nf_add_fwnode_remote() allocates the asc, which is freed when
v4l2_async_nf_cleanup() is called.
Call v4l2_async_nf_cleanup() properly in the driver paths.
Discovered with kmemleak after rmmod:
unreferenced object 0xffff000084526b80 (size 64):
comm "modprobe", pid 185, jiffies 4295013512
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 e8 0d ff bf 00 00 ff ff ................
40 83 bc 84 00 00 ff ff 60 83 bc 84 00 00 ff ff @.......`.......
backtrace (crc ac584083):
[<00000000ffb081a7>] kmemleak_alloc+0x38/0x44
[<00000000d2fd9301>] __kmalloc+0x1b0/0x250
[<000000004dd5354d>] __v4l2_async_nf_add_fwnode+0x28/0x9c
[<0000000067587657>] __v4l2_async_nf_add_fwnode_remote+0x3c/0x64 |
| IBM Guardium Data Protection 12.2 could allow a remote attacker to bypass security restrictions due to improper authorization. |
| IBM Guardium Data Protection 12.2 could allow a remote authenticated attacker to obtain sensitive information due to improper neutralization of special elements used in an SQL command. |
| IBM Guardium Data Protection 12.2 could allow a remote attacker to execute arbitrary code due to improper neutralization of input during web page generation. |
