| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
slimbus: qcom-ngd-ctrl: Register callbacks after creating the ngd
When the remoteproc starts in parallel with the NGD driver being probed,
or the remoteproc is already up when the PDR lookup is being registered,
or in the theoretical event that we get an interrupt from the hardware,
these callbacks will operate on uninitialized data. This result in
issues to boot the affected boards.
One such example can be seen in the following fault, where
qcom_slim_ngd_ssr_pdr_notify() schedules work on the NULL ngd_up_work.
[ 21.858578] ------------[ cut here ]------------
[ 21.858745] WARNING: kernel/workqueue.c:2338 at __queue_work+0x5e0/0x790, CPU#2: kworker/2:2/116
...
[ 21.859251] Call trace:
[ 21.859255] __queue_work+0x5e0/0x790 (P)
[ 21.859265] queue_work_on+0x6c/0xf0
[ 21.859273] qcom_slim_ngd_ssr_pdr_notify+0x110/0x150 [slim_qcom_ngd_ctrl]
[ 21.859304] qcom_slim_ngd_ssr_notify+0x24/0x40 [slim_qcom_ngd_ctrl]
[ 21.859318] notifier_call_chain+0xa4/0x230
[ 21.859329] srcu_notifier_call_chain+0x64/0xb8
[ 21.859338] ssr_notify_start+0x40/0x78 [qcom_common]
[ 21.859355] rproc_start+0x130/0x230
[ 21.859367] rproc_boot+0x3d4/0x518
...
Move the enablement of interrupts, and the registration of SSR and PDR
until after the NGD device has been registered.
This could be further refined by moving initialization to the control
driver probe and by removing the platform driver model from the picture. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: fix missing run load for vcn0 in attr_data_get_block_locked()
When a compressed or sparse attribute has its clusters frame-aligned,
vcn is rounded down to the frame start using cmask, which can result
in vcn != vcn0. In this case, vcn and vcn0 may reside in different
attribute segments.
The code already handles the case where vcn is in a different segment
by loading its runs before allocation. However, it fails to load runs
for vcn0 when vcn0 resides in a different segment than vcn. This causes
run_lookup_entry() to return SPARSE_LCN for vcn0 since its segment was
never loaded into the in-memory run list, triggering the WARN_ON(1).
Fix this by adding a missing check for vcn0 after the existing vcn
segment check. If vcn0 falls outside the current segment range
[svcn, evcn1), find and load the attribute segment containing vcn0
before performing the run lookup.
The following scenario triggers the bug:
attr_data_get_block_locked()
vcn = vcn0 & cmask <- vcn != vcn0 after frame alignment
load runs for vcn segment <- vcn0 segment not loaded!
attr_allocate_clusters() <- allocation succeeds
run_lookup_entry(vcn0) <- vcn0 not in run -> SPARSE_LCN
WARN_ON(1) <- bug fires here! |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - Cap AEAD AD length to 0x80000000
In order to prevent arithmetic overflows when checking the TX
buffer size, cap the associated data length to 0x80000000. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: annotate data-races around hdev->req_status
__hci_cmd_sync_sk() sets hdev->req_status under hdev->req_lock:
hdev->req_status = HCI_REQ_PEND;
However, several other functions read or write hdev->req_status without
holding any lock:
- hci_send_cmd_sync() reads req_status in hci_cmd_work (workqueue)
- hci_cmd_sync_complete() reads/writes from HCI event completion
- hci_cmd_sync_cancel() / hci_cmd_sync_cancel_sync() read/write
- hci_abort_conn() reads in connection abort path
Since __hci_cmd_sync_sk() runs on hdev->req_workqueue while
hci_send_cmd_sync() runs on hdev->workqueue, these are different
workqueues that can execute concurrently on different CPUs. The plain
C accesses constitute a data race.
Add READ_ONCE()/WRITE_ONCE() annotations on all concurrent accesses
to hdev->req_status to prevent potential compiler optimizations that
could affect correctness (e.g., load fusing in the wait_event
condition or store reordering). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: Delay put pmc->idev in mld_del_delrec()
pmc->idev is still used in ip6_mc_clear_src(), so as mld_clear_delrec()
does, the reference should be put after ip6_mc_clear_src() return. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix lockdep splat in in6_dump_addrs()
As reported by syzbot, we should not use rcu_dereference()
when rcu_read_lock() is not held.
WARNING: suspicious RCU usage
5.19.0-rc2-syzkaller #0 Not tainted
net/ipv6/addrconf.c:5175 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by syz-executor326/3617:
#0: ffffffff8d5848e8 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0xae/0xc20 net/netlink/af_netlink.c:2223
stack backtrace:
CPU: 0 PID: 3617 Comm: syz-executor326 Not tainted 5.19.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
in6_dump_addrs+0x12d1/0x1790 net/ipv6/addrconf.c:5175
inet6_dump_addr+0x9c1/0xb50 net/ipv6/addrconf.c:5300
netlink_dump+0x541/0xc20 net/netlink/af_netlink.c:2275
__netlink_dump_start+0x647/0x900 net/netlink/af_netlink.c:2380
netlink_dump_start include/linux/netlink.h:245 [inline]
rtnetlink_rcv_msg+0x73e/0xc90 net/core/rtnetlink.c:6046
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
____sys_sendmsg+0x6eb/0x810 net/socket.c:2492
___sys_sendmsg+0xf3/0x170 net/socket.c:2546
__sys_sendmsg net/socket.c:2575 [inline]
__do_sys_sendmsg net/socket.c:2584 [inline]
__se_sys_sendmsg net/socket.c:2582 [inline]
__x64_sys_sendmsg+0x132/0x220 net/socket.c:2582
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x46/0xb0 |
| We are aware that exploit code for this is public however we are not aware of any attacks in the wild abusing this flaw. This vulnerability was fixed in Firefox 152.0.6, Firefox ESR 115.38, Firefox ESR 140.13, and Thunderbird 140.13. |
| Windows Routing and Remote Access Service (RRAS) Remote Code Execution Vulnerability |
| Windows Wi-Fi Driver Remote Code Execution Vulnerability |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: nx - fix nx_crypto_ctx_exit argument
nx_crypto_ctx_shash_exit calls nx_crypto_ctx_exit with crypto_shash_ctx(...)
but crypto_shash_ctx gives a nx_crypto_ctx *, not a crypto_tfm *.
Fix the type in nx_crypto_ctx_exit and drop the bogus crypto_tfm_ctx
call.
This fixes the following oops:
BUG: Unable to handle kernel data access at 0xc0403effffffffc8
Faulting instruction address: 0xc000000000396cb4
Oops: Kernel access of bad area, sig: 11 [#15]
Call Trace:
nx_crypto_ctx_shash_exit+0x24/0x60
crypto_shash_exit_tfm+0x28/0x40
crypto_destroy_tfm+0x98/0x140
crypto_exit_ahash_using_shash+0x20/0x40
crypto_destroy_tfm+0x98/0x140
hash_release+0x1c/0x30
alg_sock_destruct+0x38/0x60
__sk_destruct+0x48/0x2b0
af_alg_release+0x58/0xb0
__sock_release+0x68/0x150
sock_close+0x20/0x40
__fput+0x110/0x3a0
sys_close+0x48/0xa0
system_call_exception+0x140/0x2d0
system_call_common+0xf4/0x258
.. which came from hardlink(1) opportunistically using AF_ALG.
The same problem exists with nx_crypto_ctx_skcipher_exit getting a context
it wasn't expecting, but apparently nobody hit that for years. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Fix SECINFO_NO_NAME decode error cleanup
nfsd4_decode_secinfo_no_name() currently initializes sin_exp after
decoding sin_style. If the XDR stream is truncated, the decoder returns
nfserr_bad_xdr before sin_exp is initialized.
Since commit 3fdc54646234 ("NFSD: Reduce amount of struct
nfsd4_compoundargs that needs clearing"), the inline iops array is not
cleared between RPC calls. A failed SECINFO_NO_NAME decode can therefore
leave sin_exp holding stale union contents from a previous operation.
The error response path still invokes nfsd4_secinfo_no_name_release(),
which calls exp_put() on a non-NULL sin_exp.
Initialize sin_exp before the first failable decode step, matching
nfsd4_decode_secinfo(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: zero-initialize GART table on allocation
GART TLB is flushed after unmapping but not after mapping. Since
amdgpu_bo_create_kernel() does not zero-initialize the buffer, when a
single PTE is written the TLB may speculatively load other uninitialized
entries from the same cacheline. Those garbage entries can appear valid,
and a subsequent write to another PTE in the same cacheline may cause the
GPU to use a stale garbage PTE from the TLB.
Fix this by calling memset_io() to zero-initialize the GART table with
gart_pte_flags immediately after allocation.
Using AMDGPU_GEM_CREATE_VRAM_CLEARED, SDMA-based clear will not work
since SDMA needs GART to be initialized to work.
(cherry picked from commit d9af8263b82b6eaa60c5718e0c6631c5037e4b24) |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vma: do not try to unmap a VMA if mmap_prepare() invoked from mmap()
The mmap_prepare hook functionality includes the ability to invoke
mmap_prepare() from the mmap() hook of existing 'stacked' drivers, that is
ones which are capable of calling the mmap hooks of other drivers/file
systems (e.g. overlayfs, shm).
As part of the mmap_prepare action functionality, we deal with errors by
unmapping the VMA should one arise. This works in the usual mmap_prepare
case, as we invoke this action at the last moment, when the VMA is
established in the maple tree.
However, the mmap() hook passes a not-fully-established VMA pointer to the
caller (which is the motivation behind the mmap_prepare() work), which is
detached.
So attempting to unmap a VMA in this state will be problematic, with the
most obvious symptom being a warning in vma_mark_detached(), because the
VMA is already detached.
It's also unncessary - the mmap() handler will clean up the VMA on error.
So to fix this issue, this patch propagates whether or not an mmap action
is being completed via the compatibility layer or directly.
If the former, then we do not attempt VMA cleanup, if the latter, then we
do.
This patch also updates the userland VMA tests to reflect the change. |
| In the Linux kernel, the following vulnerability has been resolved:
udf: reject descriptors with oversized CRC length
udf_read_tagged() skips CRC verification when descCRCLength +
sizeof(struct tag) exceeds the block size. A crafted UDF image can
set descCRCLength to an oversized value to bypass CRC validation
entirely; the descriptor is then accepted based solely on the 8-bit
tag checksum, which is trivially recomputable.
Reject such descriptors instead of silently accepting them. A
legitimate single-block descriptor should never have a CRC length that
exceeds the block. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix fsck inconsistency caused by incorrect nat_entry flag usage
f2fs_need_dentry_mark() reads nat_entry flags without mutual exclusion
with the checkpoint path, which can result in an incorrect inode block
marking state. The scenario is as follows:
create & write & fsync 'file A' write checkpoint
- f2fs_do_sync_file // inline inode
- f2fs_write_inode // inode folio is dirty
- f2fs_write_checkpoint
- f2fs_flush_merged_writes
- f2fs_sync_node_pages
- f2fs_fsync_node_pages // no dirty node
- f2fs_need_inode_block_update // return true
- f2fs_fsync_node_pages // inode dirtied
- f2fs_need_dentry_mark //return true
- f2fs_flush_nat_entries
- f2fs_write_checkpoint end
- __write_node_folio // inode with DENT_BIT_SHIFT set
SPO, "fsck --dry-run" find inode has already checkpointed but still
with DENT_BIT_SHIFT set
The state observed by f2fs_need_dentry_mark() can differ from the state
observed in __write_node_folio() after acquiring sbi->node_write. The
root cause is that the semantics of IS_CHECKPOINTED and
HAS_FSYNCED_INODE are only guaranteed after the checkpoint write has
fully completed.
This patch moves set_dentry_mark() into __write_node_folio() and
protects it with the sbi->node_write lock. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: always recover the gpu
Previously, in case there was no more work to do, recover worker
wouldn't trigger recovery and would instead rely on the gpu going to
sleep and then resuming when more work is submitted.
Recover_worker will first increment the fence of the hung ring so, if
there's only one job submitted to a ring and that causes an hang, it
will early out.
There's no guarantee that the gpu will suspend and resume before more
work is submitted and if the gpu is in a hung state it will stay in that
state and probably trigger a timeout again.
Just stop checking and always recover the gpu.
Patchwork: https://patchwork.freedesktop.org/patch/704066/ |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Add upper bound check for num_of_nodes
drm/amdkfd: Add upper bound check for num_of_nodes
in kfd_ioctl_get_process_apertures_new.
(cherry picked from commit 98ff46a5ea090c14d2cdb4f5b993b05d74f3949f) |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Block PASID attachment to nested domain with dirty tracking
Kernel lacks dirty tracking support on nested domain attached to PASID,
fails the attachment early if nesting parent domain is dirty tracking
configured, otherwise dirty pages would be lost. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/ionic: bound node_desc sysfs read with %.64s
node_desc[64] in struct ib_device is not guaranteed to be NUL-
terminated. The core IB sysfs handler uses "%.64s" for exactly this
reason (drivers/infiniband/core/sysfs.c:1307), since node_desc_store()
performs a raw memcpy of up to IB_DEVICE_NODE_DESC_MAX bytes with no NUL
termination:
memcpy(desc.node_desc, buf, min_t(int, count, IB_DEVICE_NODE_DESC_MAX));
If exactly 64 bytes are written via the node_desc sysfs file, the array
contains no NUL byte. The ionic hca_type_show() handler uses unbounded
"%s" and will read past the end of node_desc into adjacent fields of
struct ib_device until it encounters a NUL.
ionic supports IB_DEVICE_MODIFY_NODE_DESC, so this is triggerable by
userspace.
Match the core handler and bound the format specifier. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: Improve validation and configuration of ACR masks
Currently there are several issues on the user space ACR mask validation
and configuration.
- The validation for user space ACR mask (attr.config2) is incomplete,
e.g., the ACR mask could include the index which belongs to another
ACR events group, but it's not validated.
- An early return on an invalid ACR mask caused all subsequent ACR groups
to be skipped.
- The stale hardware ACR mask (hw.config1) is not cleared before setting
new hardware ACR mask.
The following changes address all of the above issues.
- Figure out the event index group of an ACR group. Any bits in the
user-space mask not present in the index group are now dropped.
- Instead of an early return on invalid bits, drop only the invalid
portions and continue iterating through all ACR events to ensure full
configuration.
- Explicitly clear the stale hardware ACR mask for each event prior to
writing the new configuration.
Besides, a non-leader event member of ACR group could be disabled in
theory. This could cause bit-shifting errors in the acr_mask of remaining
group members. But since ACR sampling requires all events to be active,
this should not be a big concern in real use case. Add a "FIXME" comment
to notice this risk. |
