Export limit exceeded: 409251 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25364 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-56770 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: netem: account for backlog updates from child qdisc In general, 'qlen' of any classful qdisc should keep track of the number of packets that the qdisc itself and all of its children holds. In case of netem, 'qlen' only accounts for the packets in its internal tfifo. When netem is used with a child qdisc, the child qdisc can use 'qdisc_tree_reduce_backlog' to inform its parent, netem, about created or dropped SKBs. This function updates 'qlen' and the backlog statistics of netem, but netem does not account for changes made by a child qdisc. 'qlen' then indicates the wrong number of packets in the tfifo. If a child qdisc creates new SKBs during enqueue and informs its parent about this, netem's 'qlen' value is increased. When netem dequeues the newly created SKBs from the child, the 'qlen' in netem is not updated. If 'qlen' reaches the configured sch->limit, the enqueue function stops working, even though the tfifo is not full. Reproduce the bug: Ensure that the sender machine has GSO enabled. Configure netem as root qdisc and tbf as its child on the outgoing interface of the machine as follows: $ tc qdisc add dev <oif> root handle 1: netem delay 100ms limit 100 $ tc qdisc add dev <oif> parent 1:0 tbf rate 50Mbit burst 1542 latency 50ms Send bulk TCP traffic out via this interface, e.g., by running an iPerf3 client on the machine. Check the qdisc statistics: $ tc -s qdisc show dev <oif> Statistics after 10s of iPerf3 TCP test before the fix (note that netem's backlog > limit, netem stopped accepting packets): qdisc netem 1: root refcnt 2 limit 1000 delay 100ms Sent 2767766 bytes 1848 pkt (dropped 652, overlimits 0 requeues 0) backlog 4294528236b 1155p requeues 0 qdisc tbf 10: parent 1:1 rate 50Mbit burst 1537b lat 50ms Sent 2767766 bytes 1848 pkt (dropped 327, overlimits 7601 requeues 0) backlog 0b 0p requeues 0 Statistics after the fix: qdisc netem 1: root refcnt 2 limit 1000 delay 100ms Sent 37766372 bytes 24974 pkt (dropped 9, overlimits 0 requeues 0) backlog 0b 0p requeues 0 qdisc tbf 10: parent 1:1 rate 50Mbit burst 1537b lat 50ms Sent 37766372 bytes 24974 pkt (dropped 327, overlimits 96017 requeues 0) backlog 0b 0p requeues 0 tbf segments the GSO SKBs (tbf_segment) and updates the netem's 'qlen'. The interface fully stops transferring packets and "locks". In this case, the child qdisc and tfifo are empty, but 'qlen' indicates the tfifo is at its limit and no more packets are accepted. This patch adds a counter for the entries in the tfifo. Netem's 'qlen' is only decreased when a packet is returned by its dequeue function, and not during enqueuing into the child qdisc. External updates to 'qlen' are thus accounted for and only the behavior of the backlog statistics changes. As in other qdiscs, 'qlen' then keeps track of how many packets are held in netem and all of its children. As before, sch->limit remains as the maximum number of packets in the tfifo. The same applies to netem's backlog statistics. | ||||
| CVE-2024-56719 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 10 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix TSO DMA API usage causing oops Commit 66600fac7a98 ("net: stmmac: TSO: Fix unbalanced DMA map/unmap for non-paged SKB data") moved the assignment of tx_skbuff_dma[]'s members to be later in stmmac_tso_xmit(). The buf (dma cookie) and len stored in this structure are passed to dma_unmap_single() by stmmac_tx_clean(). The DMA API requires that the dma cookie passed to dma_unmap_single() is the same as the value returned from dma_map_single(). However, by moving the assignment later, this is not the case when priv->dma_cap.addr64 > 32 as "des" is offset by proto_hdr_len. This causes problems such as: dwc-eth-dwmac 2490000.ethernet eth0: Tx DMA map failed and with DMA_API_DEBUG enabled: DMA-API: dwc-eth-dwmac 2490000.ethernet: device driver tries to +free DMA memory it has not allocated [device address=0x000000ffffcf65c0] [size=66 bytes] Fix this by maintaining "des" as the original DMA cookie, and use tso_des to pass the offset DMA cookie to stmmac_tso_allocator(). Full details of the crashes can be found at: https://lore.kernel.org/all/d8112193-0386-4e14-b516-37c2d838171a@nvidia.com/ https://lore.kernel.org/all/klkzp5yn5kq5efgtrow6wbvnc46bcqfxs65nz3qy77ujr5turc@bwwhelz2l4dw/ | ||||
| CVE-2024-56703 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix soft lockups in fib6_select_path under high next hop churn Soft lockups have been observed on a cluster of Linux-based edge routers located in a highly dynamic environment. Using the `bird` service, these routers continuously update BGP-advertised routes due to frequently changing nexthop destinations, while also managing significant IPv6 traffic. The lockups occur during the traversal of the multipath circular linked-list in the `fib6_select_path` function, particularly while iterating through the siblings in the list. The issue typically arises when the nodes of the linked list are unexpectedly deleted concurrently on a different core—indicated by their 'next' and 'previous' elements pointing back to the node itself and their reference count dropping to zero. This results in an infinite loop, leading to a soft lockup that triggers a system panic via the watchdog timer. Apply RCU primitives in the problematic code sections to resolve the issue. Where necessary, update the references to fib6_siblings to annotate or use the RCU APIs. Include a test script that reproduces the issue. The script periodically updates the routing table while generating a heavy load of outgoing IPv6 traffic through multiple iperf3 clients. It consistently induces infinite soft lockups within a couple of minutes. Kernel log: 0 [ffffbd13003e8d30] machine_kexec at ffffffff8ceaf3eb 1 [ffffbd13003e8d90] __crash_kexec at ffffffff8d0120e3 2 [ffffbd13003e8e58] panic at ffffffff8cef65d4 3 [ffffbd13003e8ed8] watchdog_timer_fn at ffffffff8d05cb03 4 [ffffbd13003e8f08] __hrtimer_run_queues at ffffffff8cfec62f 5 [ffffbd13003e8f70] hrtimer_interrupt at ffffffff8cfed756 6 [ffffbd13003e8fd0] __sysvec_apic_timer_interrupt at ffffffff8cea01af 7 [ffffbd13003e8ff0] sysvec_apic_timer_interrupt at ffffffff8df1b83d -- <IRQ stack> -- 8 [ffffbd13003d3708] asm_sysvec_apic_timer_interrupt at ffffffff8e000ecb [exception RIP: fib6_select_path+299] RIP: ffffffff8ddafe7b RSP: ffffbd13003d37b8 RFLAGS: 00000287 RAX: ffff975850b43600 RBX: ffff975850b40200 RCX: 0000000000000000 RDX: 000000003fffffff RSI: 0000000051d383e4 RDI: ffff975850b43618 RBP: ffffbd13003d3800 R8: 0000000000000000 R9: ffff975850b40200 R10: 0000000000000000 R11: 0000000000000000 R12: ffffbd13003d3830 R13: ffff975850b436a8 R14: ffff975850b43600 R15: 0000000000000007 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 9 [ffffbd13003d3808] ip6_pol_route at ffffffff8ddb030c 10 [ffffbd13003d3888] ip6_pol_route_input at ffffffff8ddb068c 11 [ffffbd13003d3898] fib6_rule_lookup at ffffffff8ddf02b5 12 [ffffbd13003d3928] ip6_route_input at ffffffff8ddb0f47 13 [ffffbd13003d3a18] ip6_rcv_finish_core.constprop.0 at ffffffff8dd950d0 14 [ffffbd13003d3a30] ip6_list_rcv_finish.constprop.0 at ffffffff8dd96274 15 [ffffbd13003d3a98] ip6_sublist_rcv at ffffffff8dd96474 16 [ffffbd13003d3af8] ipv6_list_rcv at ffffffff8dd96615 17 [ffffbd13003d3b60] __netif_receive_skb_list_core at ffffffff8dc16fec 18 [ffffbd13003d3be0] netif_receive_skb_list_internal at ffffffff8dc176b3 19 [ffffbd13003d3c50] napi_gro_receive at ffffffff8dc565b9 20 [ffffbd13003d3c80] ice_receive_skb at ffffffffc087e4f5 [ice] 21 [ffffbd13003d3c90] ice_clean_rx_irq at ffffffffc0881b80 [ice] 22 [ffffbd13003d3d20] ice_napi_poll at ffffffffc088232f [ice] 23 [ffffbd13003d3d80] __napi_poll at ffffffff8dc18000 24 [ffffbd13003d3db8] net_rx_action at ffffffff8dc18581 25 [ffffbd13003d3e40] __do_softirq at ffffffff8df352e9 26 [ffffbd13003d3eb0] run_ksoftirqd at ffffffff8ceffe47 27 [ffffbd13003d3ec0] smpboot_thread_fn at ffffffff8cf36a30 28 [ffffbd13003d3ee8] kthread at ffffffff8cf2b39f 29 [ffffbd13003d3f28] ret_from_fork at ffffffff8ce5fa64 30 [ffffbd13003d3f50] ret_from_fork_asm at ffffffff8ce03cbb | ||||
| CVE-2024-56657 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: control: Avoid WARN() for symlink errors Using WARN() for showing the error of symlink creations don't give more information than telling that something goes wrong, since the usual code path is a lregister callback from each control element creation. More badly, the use of WARN() rather confuses fuzzer as if it were serious issues. This patch downgrades the warning messages to use the normal dev_err() instead of WARN(). For making it clearer, add the function name to the prefix, too. | ||||
| CVE-2024-56650 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: fix LED ID check in led_tg_check() Syzbot has reported the following BUG detected by KASAN: BUG: KASAN: slab-out-of-bounds in strlen+0x58/0x70 Read of size 1 at addr ffff8881022da0c8 by task repro/5879 ... Call Trace: <TASK> dump_stack_lvl+0x241/0x360 ? __pfx_dump_stack_lvl+0x10/0x10 ? __pfx__printk+0x10/0x10 ? _printk+0xd5/0x120 ? __virt_addr_valid+0x183/0x530 ? __virt_addr_valid+0x183/0x530 print_report+0x169/0x550 ? __virt_addr_valid+0x183/0x530 ? __virt_addr_valid+0x183/0x530 ? __virt_addr_valid+0x45f/0x530 ? __phys_addr+0xba/0x170 ? strlen+0x58/0x70 kasan_report+0x143/0x180 ? strlen+0x58/0x70 strlen+0x58/0x70 kstrdup+0x20/0x80 led_tg_check+0x18b/0x3c0 xt_check_target+0x3bb/0xa40 ? __pfx_xt_check_target+0x10/0x10 ? stack_depot_save_flags+0x6e4/0x830 ? nft_target_init+0x174/0xc30 nft_target_init+0x82d/0xc30 ? __pfx_nft_target_init+0x10/0x10 ? nf_tables_newrule+0x1609/0x2980 ? nf_tables_newrule+0x1609/0x2980 ? rcu_is_watching+0x15/0xb0 ? nf_tables_newrule+0x1609/0x2980 ? nf_tables_newrule+0x1609/0x2980 ? __kmalloc_noprof+0x21a/0x400 nf_tables_newrule+0x1860/0x2980 ? __pfx_nf_tables_newrule+0x10/0x10 ? __nla_parse+0x40/0x60 nfnetlink_rcv+0x14e5/0x2ab0 ? __pfx_validate_chain+0x10/0x10 ? __pfx_nfnetlink_rcv+0x10/0x10 ? __lock_acquire+0x1384/0x2050 ? netlink_deliver_tap+0x2e/0x1b0 ? __pfx_lock_release+0x10/0x10 ? netlink_deliver_tap+0x2e/0x1b0 netlink_unicast+0x7f8/0x990 ? __pfx_netlink_unicast+0x10/0x10 ? __virt_addr_valid+0x183/0x530 ? __check_object_size+0x48e/0x900 netlink_sendmsg+0x8e4/0xcb0 ? __pfx_netlink_sendmsg+0x10/0x10 ? aa_sock_msg_perm+0x91/0x160 ? __pfx_netlink_sendmsg+0x10/0x10 __sock_sendmsg+0x223/0x270 ____sys_sendmsg+0x52a/0x7e0 ? __pfx_____sys_sendmsg+0x10/0x10 __sys_sendmsg+0x292/0x380 ? __pfx___sys_sendmsg+0x10/0x10 ? lockdep_hardirqs_on_prepare+0x43d/0x780 ? __pfx_lockdep_hardirqs_on_prepare+0x10/0x10 ? exc_page_fault+0x590/0x8c0 ? do_syscall_64+0xb6/0x230 do_syscall_64+0xf3/0x230 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... </TASK> Since an invalid (without '\0' byte at all) byte sequence may be passed from userspace, add an extra check to ensure that such a sequence is rejected as possible ID and so never passed to 'kstrdup()' and further. | ||||
| CVE-2024-56647 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: Fix icmp host relookup triggering ip_rt_bug arp link failure may trigger ip_rt_bug while xfrm enabled, call trace is: WARNING: CPU: 0 PID: 0 at net/ipv4/route.c:1241 ip_rt_bug+0x14/0x20 Modules linked in: CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-rc6-00077-g2e1b3cc9d7f7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:ip_rt_bug+0x14/0x20 Call Trace: <IRQ> ip_send_skb+0x14/0x40 __icmp_send+0x42d/0x6a0 ipv4_link_failure+0xe2/0x1d0 arp_error_report+0x3c/0x50 neigh_invalidate+0x8d/0x100 neigh_timer_handler+0x2e1/0x330 call_timer_fn+0x21/0x120 __run_timer_base.part.0+0x1c9/0x270 run_timer_softirq+0x4c/0x80 handle_softirqs+0xac/0x280 irq_exit_rcu+0x62/0x80 sysvec_apic_timer_interrupt+0x77/0x90 The script below reproduces this scenario: ip xfrm policy add src 0.0.0.0/0 dst 0.0.0.0/0 \ dir out priority 0 ptype main flag localok icmp ip l a veth1 type veth ip a a 192.168.141.111/24 dev veth0 ip l s veth0 up ping 192.168.141.155 -c 1 icmp_route_lookup() create input routes for locally generated packets while xfrm relookup ICMP traffic.Then it will set input route (dst->out = ip_rt_bug) to skb for DESTUNREACH. For ICMP err triggered by locally generated packets, dst->dev of output route is loopback. Generally, xfrm relookup verification is not required on loopback interfaces (net.ipv4.conf.lo.disable_xfrm = 1). Skip icmp relookup for locally generated packets to fix it. | ||||
| CVE-2024-56644 | 3 Debian, Linux, Redhat | 3 Debian Linux, Linux Kernel, Enterprise Linux | 2026-10-15 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/ipv6: release expired exception dst cached in socket Dst objects get leaked in ip6_negative_advice() when this function is executed for an expired IPv6 route located in the exception table. There are several conditions that must be fulfilled for the leak to occur: * an ICMPv6 packet indicating a change of the MTU for the path is received, resulting in an exception dst being created * a TCP connection that uses the exception dst for routing packets must start timing out so that TCP begins retransmissions * after the exception dst expires, the FIB6 garbage collector must not run before TCP executes ip6_negative_advice() for the expired exception dst When TCP executes ip6_negative_advice() for an exception dst that has expired and if no other socket holds a reference to the exception dst, the refcount of the exception dst is 2, which corresponds to the increment made by dst_init() and the increment made by the TCP socket for which the connection is timing out. The refcount made by the socket is never released. The refcount of the dst is decremented in sk_dst_reset() but that decrement is counteracted by a dst_hold() intentionally placed just before the sk_dst_reset() in ip6_negative_advice(). After ip6_negative_advice() has finished, there is no other object tied to the dst. The socket lost its reference stored in sk_dst_cache and the dst is no longer in the exception table. The exception dst becomes a leaked object. As a result of this dst leak, an unbalanced refcount is reported for the loopback device of a net namespace being destroyed under kernels that do not contain e5f80fcf869a ("ipv6: give an IPv6 dev to blackhole_netdev"): unregister_netdevice: waiting for lo to become free. Usage count = 2 Fix the dst leak by removing the dst_hold() in ip6_negative_advice(). The patch that introduced the dst_hold() in ip6_negative_advice() was 92f1655aa2b22 ("net: fix __dst_negative_advice() race"). But 92f1655aa2b22 merely refactored the code with regards to the dst refcount so the issue was present even before 92f1655aa2b22. The bug was introduced in 54c1a859efd9f ("ipv6: Don't drop cache route entry unless timer actually expired.") where the expired cached route is deleted and the sk_dst_cache member of the socket is set to NULL by calling dst_negative_advice() but the refcount belonging to the socket is left unbalanced. The IPv4 version - ipv4_negative_advice() - is not affected by this bug. When the TCP connection times out ipv4_negative_advice() merely resets the sk_dst_cache of the socket while decrementing the refcount of the exception dst. | ||||
| CVE-2024-56631 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: sg: Fix slab-use-after-free read in sg_release() Fix a use-after-free bug in sg_release(), detected by syzbot with KASAN: BUG: KASAN: slab-use-after-free in lock_release+0x151/0xa30 kernel/locking/lockdep.c:5838 __mutex_unlock_slowpath+0xe2/0x750 kernel/locking/mutex.c:912 sg_release+0x1f4/0x2e0 drivers/scsi/sg.c:407 In sg_release(), the function kref_put(&sfp->f_ref, sg_remove_sfp) is called before releasing the open_rel_lock mutex. The kref_put() call may decrement the reference count of sfp to zero, triggering its cleanup through sg_remove_sfp(). This cleanup includes scheduling deferred work via sg_remove_sfp_usercontext(), which ultimately frees sfp. After kref_put(), sg_release() continues to unlock open_rel_lock and may reference sfp or sdp. If sfp has already been freed, this results in a slab-use-after-free error. Move the kref_put(&sfp->f_ref, sg_remove_sfp) call after unlocking the open_rel_lock mutex. This ensures: - No references to sfp or sdp occur after the reference count is decremented. - Cleanup functions such as sg_remove_sfp() and sg_remove_sfp_usercontext() can safely execute without impacting the mutex handling in sg_release(). The fix has been tested and validated by syzbot. This patch closes the bug reported at the following syzkaller link and ensures proper sequencing of resource cleanup and mutex operations, eliminating the risk of use-after-free errors in sg_release(). | ||||
| CVE-2024-56606 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: af_packet: avoid erroring out after sock_init_data() in packet_create() After sock_init_data() the allocated sk object is attached to the provided sock object. On error, packet_create() frees the sk object leaving the dangling pointer in the sock object on return. Some other code may try to use this pointer and cause use-after-free. | ||||
| CVE-2024-56601 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: inet: do not leave a dangling sk pointer in inet_create() sock_init_data() attaches the allocated sk object to the provided sock object. If inet_create() fails later, the sk object is freed, but the sock object retains the dangling pointer, which may create use-after-free later. Clear the sk pointer in the sock object on error. | ||||
| CVE-2024-56600 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: inet6: do not leave a dangling sk pointer in inet6_create() sock_init_data() attaches the allocated sk pointer to the provided sock object. If inet6_create() fails later, the sk object is released, but the sock object retains the dangling sk pointer, which may cause use-after-free later. Clear the sock sk pointer on error. | ||||
| CVE-2024-56570 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ovl: Filter invalid inodes with missing lookup function Add a check to the ovl_dentry_weird() function to prevent the processing of directory inodes that lack the lookup function. This is important because such inodes can cause errors in overlayfs when passed to the lowerstack. | ||||
| CVE-2024-56569 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix regression with module command in stack_trace_filter When executing the following command: # echo "write*:mod:ext3" > /sys/kernel/tracing/stack_trace_filter The current mod command causes a null pointer dereference. While commit 0f17976568b3f ("ftrace: Fix regression with module command in stack_trace_filter") has addressed part of the issue, it left a corner case unhandled, which still results in a kernel crash. | ||||
| CVE-2024-54458 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: bsg: Set bsg_queue to NULL after removal Currently, this does not cause any issues, but I believe it is necessary to set bsg_queue to NULL after removing it to prevent potential use-after-free (UAF) access. | ||||
| CVE-2024-53217 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent NULL dereference in nfsd4_process_cb_update() @ses is initialized to NULL. If __nfsd4_find_backchannel() finds no available backchannel session, setup_callback_client() will try to dereference @ses and segfault. | ||||
| CVE-2024-53170 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: block: fix uaf for flush rq while iterating tags blk_mq_clear_flush_rq_mapping() is not called during scsi probe, by checking blk_queue_init_done(). However, QUEUE_FLAG_INIT_DONE is cleared in del_gendisk by commit aec89dc5d421 ("block: keep q_usage_counter in atomic mode after del_gendisk"), hence for disk like scsi, following blk_mq_destroy_queue() will not clear flush rq from tags->rqs[] as well, cause following uaf that is found by our syzkaller for v6.6: ================================================================== BUG: KASAN: slab-use-after-free in blk_mq_find_and_get_req+0x16e/0x1a0 block/blk-mq-tag.c:261 Read of size 4 at addr ffff88811c969c20 by task kworker/1:2H/224909 CPU: 1 PID: 224909 Comm: kworker/1:2H Not tainted 6.6.0-ga836a5060850 #32 Workqueue: kblockd blk_mq_timeout_work Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106 print_address_description.constprop.0+0x66/0x300 mm/kasan/report.c:364 print_report+0x3e/0x70 mm/kasan/report.c:475 kasan_report+0xb8/0xf0 mm/kasan/report.c:588 blk_mq_find_and_get_req+0x16e/0x1a0 block/blk-mq-tag.c:261 bt_iter block/blk-mq-tag.c:288 [inline] __sbitmap_for_each_set include/linux/sbitmap.h:295 [inline] sbitmap_for_each_set include/linux/sbitmap.h:316 [inline] bt_for_each+0x455/0x790 block/blk-mq-tag.c:325 blk_mq_queue_tag_busy_iter+0x320/0x740 block/blk-mq-tag.c:534 blk_mq_timeout_work+0x1a3/0x7b0 block/blk-mq.c:1673 process_one_work+0x7c4/0x1450 kernel/workqueue.c:2631 process_scheduled_works kernel/workqueue.c:2704 [inline] worker_thread+0x804/0xe40 kernel/workqueue.c:2785 kthread+0x346/0x450 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:293 Allocated by task 942: kasan_save_stack+0x22/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 ____kasan_kmalloc mm/kasan/common.c:374 [inline] __kasan_kmalloc mm/kasan/common.c:383 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:380 kasan_kmalloc include/linux/kasan.h:198 [inline] __do_kmalloc_node mm/slab_common.c:1007 [inline] __kmalloc_node+0x69/0x170 mm/slab_common.c:1014 kmalloc_node include/linux/slab.h:620 [inline] kzalloc_node include/linux/slab.h:732 [inline] blk_alloc_flush_queue+0x144/0x2f0 block/blk-flush.c:499 blk_mq_alloc_hctx+0x601/0x940 block/blk-mq.c:3788 blk_mq_alloc_and_init_hctx+0x27f/0x330 block/blk-mq.c:4261 blk_mq_realloc_hw_ctxs+0x488/0x5e0 block/blk-mq.c:4294 blk_mq_init_allocated_queue+0x188/0x860 block/blk-mq.c:4350 blk_mq_init_queue_data block/blk-mq.c:4166 [inline] blk_mq_init_queue+0x8d/0x100 block/blk-mq.c:4176 scsi_alloc_sdev+0x843/0xd50 drivers/scsi/scsi_scan.c:335 scsi_probe_and_add_lun+0x77c/0xde0 drivers/scsi/scsi_scan.c:1189 __scsi_scan_target+0x1fc/0x5a0 drivers/scsi/scsi_scan.c:1727 scsi_scan_channel drivers/scsi/scsi_scan.c:1815 [inline] scsi_scan_channel+0x14b/0x1e0 drivers/scsi/scsi_scan.c:1791 scsi_scan_host_selected+0x2fe/0x400 drivers/scsi/scsi_scan.c:1844 scsi_scan+0x3a0/0x3f0 drivers/scsi/scsi_sysfs.c:151 store_scan+0x2a/0x60 drivers/scsi/scsi_sysfs.c:191 dev_attr_store+0x5c/0x90 drivers/base/core.c:2388 sysfs_kf_write+0x11c/0x170 fs/sysfs/file.c:136 kernfs_fop_write_iter+0x3fc/0x610 fs/kernfs/file.c:338 call_write_iter include/linux/fs.h:2083 [inline] new_sync_write+0x1b4/0x2d0 fs/read_write.c:493 vfs_write+0x76c/0xb00 fs/read_write.c:586 ksys_write+0x127/0x250 fs/read_write.c:639 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x70/0x120 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x78/0xe2 Freed by task 244687: kasan_save_stack+0x22/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x50 mm/kasan/generic.c:522 ____kasan_slab_free mm/kasan/common.c:236 [inline] __kasan_slab_free+0x12a/0x1b0 mm/kasan/common.c:244 kasan_slab_free include/linux/kasan.h:164 [in ---truncated--- | ||||
| CVE-2024-53166 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: block, bfq: fix bfqq uaf in bfq_limit_depth() Set new allocated bfqq to bic or remove freed bfqq from bic are both protected by bfqd->lock, however bfq_limit_depth() is deferencing bfqq from bic without the lock, this can lead to UAF if the io_context is shared by multiple tasks. For example, test bfq with io_uring can trigger following UAF in v6.6: ================================================================== BUG: KASAN: slab-use-after-free in bfqq_group+0x15/0x50 Call Trace: <TASK> dump_stack_lvl+0x47/0x80 print_address_description.constprop.0+0x66/0x300 print_report+0x3e/0x70 kasan_report+0xb4/0xf0 bfqq_group+0x15/0x50 bfqq_request_over_limit+0x130/0x9a0 bfq_limit_depth+0x1b5/0x480 __blk_mq_alloc_requests+0x2b5/0xa00 blk_mq_get_new_requests+0x11d/0x1d0 blk_mq_submit_bio+0x286/0xb00 submit_bio_noacct_nocheck+0x331/0x400 __block_write_full_folio+0x3d0/0x640 writepage_cb+0x3b/0xc0 write_cache_pages+0x254/0x6c0 write_cache_pages+0x254/0x6c0 do_writepages+0x192/0x310 filemap_fdatawrite_wbc+0x95/0xc0 __filemap_fdatawrite_range+0x99/0xd0 filemap_write_and_wait_range.part.0+0x4d/0xa0 blkdev_read_iter+0xef/0x1e0 io_read+0x1b6/0x8a0 io_issue_sqe+0x87/0x300 io_wq_submit_work+0xeb/0x390 io_worker_handle_work+0x24d/0x550 io_wq_worker+0x27f/0x6c0 ret_from_fork_asm+0x1b/0x30 </TASK> Allocated by task 808602: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_slab_alloc+0x83/0x90 kmem_cache_alloc_node+0x1b1/0x6d0 bfq_get_queue+0x138/0xfa0 bfq_get_bfqq_handle_split+0xe3/0x2c0 bfq_init_rq+0x196/0xbb0 bfq_insert_request.isra.0+0xb5/0x480 bfq_insert_requests+0x156/0x180 blk_mq_insert_request+0x15d/0x440 blk_mq_submit_bio+0x8a4/0xb00 submit_bio_noacct_nocheck+0x331/0x400 __blkdev_direct_IO_async+0x2dd/0x330 blkdev_write_iter+0x39a/0x450 io_write+0x22a/0x840 io_issue_sqe+0x87/0x300 io_wq_submit_work+0xeb/0x390 io_worker_handle_work+0x24d/0x550 io_wq_worker+0x27f/0x6c0 ret_from_fork+0x2d/0x50 ret_from_fork_asm+0x1b/0x30 Freed by task 808589: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x27/0x40 __kasan_slab_free+0x126/0x1b0 kmem_cache_free+0x10c/0x750 bfq_put_queue+0x2dd/0x770 __bfq_insert_request.isra.0+0x155/0x7a0 bfq_insert_request.isra.0+0x122/0x480 bfq_insert_requests+0x156/0x180 blk_mq_dispatch_plug_list+0x528/0x7e0 blk_mq_flush_plug_list.part.0+0xe5/0x590 __blk_flush_plug+0x3b/0x90 blk_finish_plug+0x40/0x60 do_writepages+0x19d/0x310 filemap_fdatawrite_wbc+0x95/0xc0 __filemap_fdatawrite_range+0x99/0xd0 filemap_write_and_wait_range.part.0+0x4d/0xa0 blkdev_read_iter+0xef/0x1e0 io_read+0x1b6/0x8a0 io_issue_sqe+0x87/0x300 io_wq_submit_work+0xeb/0x390 io_worker_handle_work+0x24d/0x550 io_wq_worker+0x27f/0x6c0 ret_from_fork+0x2d/0x50 ret_from_fork_asm+0x1b/0x30 Fix the problem by protecting bic_to_bfqq() with bfqd->lock. | ||||
| CVE-2024-53165 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: sh: intc: Fix use-after-free bug in register_intc_controller() In the error handling for this function, d is freed without ever removing it from intc_list which would lead to a use after free. To fix this, let's only add it to the list after everything has succeeded. | ||||
| CVE-2024-53164 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: sched: fix ordering of qlen adjustment Changes to sch->q.qlen around qdisc_tree_reduce_backlog() need to happen _before_ a call to said function because otherwise it may fail to notify parent qdiscs when the child is about to become empty. | ||||
| CVE-2024-53140 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netlink: terminate outstanding dump on socket close Netlink supports iterative dumping of data. It provides the families the following ops: - start - (optional) kicks off the dumping process - dump - actual dump helper, keeps getting called until it returns 0 - done - (optional) pairs with .start, can be used for cleanup The whole process is asynchronous and the repeated calls to .dump don't actually happen in a tight loop, but rather are triggered in response to recvmsg() on the socket. This gives the user full control over the dump, but also means that the user can close the socket without getting to the end of the dump. To make sure .start is always paired with .done we check if there is an ongoing dump before freeing the socket, and if so call .done. The complication is that sockets can get freed from BH and .done is allowed to sleep. So we use a workqueue to defer the call, when needed. Unfortunately this does not work correctly. What we defer is not the cleanup but rather releasing a reference on the socket. We have no guarantee that we own the last reference, if someone else holds the socket they may release it in BH and we're back to square one. The whole dance, however, appears to be unnecessary. Only the user can interact with dumps, so we can clean up when socket is closed. And close always happens in process context. Some async code may still access the socket after close, queue notification skbs to it etc. but no dumps can start, end or otherwise make progress. Delete the workqueue and flush the dump state directly from the release handler. Note that further cleanup is possible in -next, for instance we now always call .done before releasing the main module reference, so dump doesn't have to take a reference of its own. | ||||