| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
cachestat: fix page cache statistics permission checking
When the 'cachestat()' system call was added in commit cf264e1329fb
("cachestat: implement cachestat syscall"), it was meant to be a much
more convenient (and performant) version of mincore() that didn't need
mapping things into the user virtual address space in order to work.
But it ended up missing the "check for writability or ownership" fix for
mincore(), done in commit 134fca9063ad ("mm/mincore.c: make mincore()
more conservative").
This just adds equivalent logic to 'cachestat()', modified for the file
context (rather than vma). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix accessing invalid dip_ctx during destroying QP
If it fails to modify QP to RTR, dip_ctx will not be attached. And
during detroying QP, the invalid dip_ctx pointer will be accessed. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix the (non-)cancellation of copy when cache is temporarily disabled
When the caching for a cookie is temporarily disabled (e.g. due to a DIO
write on that file), future copying to the cache for that file is disabled
until all fds open on that file are closed. However, if netfslib is using
the deprecated PG_private_2 method (such as is currently used by ceph), and
decides it wants to copy to the cache, netfs_advance_write() will just bail
at the first check seeing that the cache stream is unavailable, and
indicate that it dealt with all the content.
This means that we have no subrequests to provide notifications to drive
the state machine or even to pin the request and the request just gets
discarded, leaving the folios with PG_private_2 set.
Fix this by jumping directly to cancel the request if the cache is not
available. That way, we don't remove mark3 from the folio_queue list and
netfs_pgpriv2_cancel() will clean up the folios.
This was found by running the generic/013 xfstest against ceph with an
active cache and the "-o fsc" option passed to ceph. That would usually
hang |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix ceph copy to cache on write-begin
At the end of netfs_unlock_read_folio() in which folios are marked
appropriately for copying to the cache (either with by being marked dirty
and having their private data set or by having PG_private_2 set) and then
unlocked, the folio_queue struct has the entry pointing to the folio
cleared. This presents a problem for netfs_pgpriv2_write_to_the_cache(),
which is used to write folios marked with PG_private_2 to the cache as it
expects to be able to trawl the folio_queue list thereafter to find the
relevant folios, leading to a hang.
Fix this by not clearing the folio_queue entry if we're going to do the
deprecated copy-to-cache. The clearance will be done instead as the folios
are written to the cache.
This can be reproduced by starting cachefiles, mounting a ceph filesystem
with "-o fsc" and writing to it. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Replace rq_lock() to raw_spin_rq_lock() in scx_ops_bypass()
scx_ops_bypass() iterates all CPUs to re-enqueue all the scx tasks.
For each CPU, it acquires a lock using rq_lock() regardless of whether
a CPU is offline or the CPU is currently running a task in a higher
scheduler class (e.g., deadline). The rq_lock() is supposed to be used
for online CPUs, and the use of rq_lock() may trigger an unnecessary
warning in rq_pin_lock(). Therefore, replace rq_lock() to
raw_spin_rq_lock() in scx_ops_bypass().
Without this change, we observe the following warning:
===== START =====
[ 6.615205] rq->balance_callback && rq->balance_callback != &balance_push_callback
[ 6.615208] WARNING: CPU: 2 PID: 0 at kernel/sched/sched.h:1730 __schedule+0x1130/0x1c90
===== END ===== |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: dwmac-tegra: Read iommu stream id from device tree
Nvidia's Tegra MGBE controllers require the IOMMU "Stream ID" (SID) to be
written to the MGBE_WRAP_AXI_ASID0_CTRL register.
The current driver is hard coded to use MGBE0's SID for all controllers.
This causes softirq time outs and kernel panics when using controllers
other than MGBE0.
Example dmesg errors when an ethernet cable is connected to MGBE1:
[ 116.133290] tegra-mgbe 6910000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 121.851283] tegra-mgbe 6910000.ethernet eth1: NETDEV WATCHDOG: CPU: 5: transmit queue 0 timed out 5690 ms
[ 121.851782] tegra-mgbe 6910000.ethernet eth1: Reset adapter.
[ 121.892464] tegra-mgbe 6910000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 121.905920] tegra-mgbe 6910000.ethernet eth1: PHY [stmmac-1:00] driver [Aquantia AQR113] (irq=171)
[ 121.907356] tegra-mgbe 6910000.ethernet eth1: Enabling Safety Features
[ 121.907578] tegra-mgbe 6910000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 121.908399] tegra-mgbe 6910000.ethernet eth1: registered PTP clock
[ 121.908582] tegra-mgbe 6910000.ethernet eth1: configuring for phy/10gbase-r link mode
[ 125.961292] tegra-mgbe 6910000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 181.921198] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
[ 181.921404] rcu: 7-....: (1 GPs behind) idle=540c/1/0x4000000000000002 softirq=1748/1749 fqs=2337
[ 181.921684] rcu: (detected by 4, t=6002 jiffies, g=1357, q=1254 ncpus=8)
[ 181.921878] Sending NMI from CPU 4 to CPUs 7:
[ 181.921886] NMI backtrace for cpu 7
[ 181.922131] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Kdump: loaded Not tainted 6.13.0-rc3+ #6
[ 181.922390] Hardware name: NVIDIA CTI Forge + Orin AGX/Jetson, BIOS 202402.1-Unknown 10/28/2024
[ 181.922658] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 181.922847] pc : handle_softirqs+0x98/0x368
[ 181.922978] lr : __do_softirq+0x18/0x20
[ 181.923095] sp : ffff80008003bf50
[ 181.923189] x29: ffff80008003bf50 x28: 0000000000000008 x27: 0000000000000000
[ 181.923379] x26: ffffce78ea277000 x25: 0000000000000000 x24: 0000001c61befda0
[ 181.924486] x23: 0000000060400009 x22: ffffce78e99918bc x21: ffff80008018bd70
[ 181.925568] x20: ffffce78e8bb00d8 x19: ffff80008018bc20 x18: 0000000000000000
[ 181.926655] x17: ffff318ebe7d3000 x16: ffff800080038000 x15: 0000000000000000
[ 181.931455] x14: ffff000080816680 x13: ffff318ebe7d3000 x12: 000000003464d91d
[ 181.938628] x11: 0000000000000040 x10: ffff000080165a70 x9 : ffffce78e8bb0160
[ 181.945804] x8 : ffff8000827b3160 x7 : f9157b241586f343 x6 : eeb6502a01c81c74
[ 181.953068] x5 : a4acfcdd2e8096bb x4 : ffffce78ea277340 x3 : 00000000ffffd1e1
[ 181.960329] x2 : 0000000000000101 x1 : ffffce78ea277340 x0 : ffff318ebe7d3000
[ 181.967591] Call trace:
[ 181.970043] handle_softirqs+0x98/0x368 (P)
[ 181.974240] __do_softirq+0x18/0x20
[ 181.977743] ____do_softirq+0x14/0x28
[ 181.981415] call_on_irq_stack+0x24/0x30
[ 181.985180] do_softirq_own_stack+0x20/0x30
[ 181.989379] __irq_exit_rcu+0x114/0x140
[ 181.993142] irq_exit_rcu+0x14/0x28
[ 181.996816] el1_interrupt+0x44/0xb8
[ 182.000316] el1h_64_irq_handler+0x14/0x20
[ 182.004343] el1h_64_irq+0x80/0x88
[ 182.007755] cpuidle_enter_state+0xc4/0x4a8 (P)
[ 182.012305] cpuidle_enter+0x3c/0x58
[ 182.015980] cpuidle_idle_call+0x128/0x1c0
[ 182.020005] do_idle+0xe0/0xf0
[ 182.023155] cpu_startup_entry+0x3c/0x48
[ 182.026917] secondary_start_kernel+0xdc/0x120
[ 182.031379] __secondary_switched+0x74/0x78
[ 212.971162] rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 7-.... } 6103 jiffies s: 417 root: 0x80/.
[ 212.985935] rcu: blocking rcu_node structures (internal RCU debug):
[ 212.992758] Sending NMI from CPU 0 to CPUs 7:
[ 212.998539] NMI backtrace for cpu 7
[ 213.004304] CPU: 7 UID: 0 PI
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: add the missing error handling inside get_canonical_dev_path
Inside function get_canonical_dev_path(), we call d_path() to get the
final device path.
But d_path() can return error, and in that case the next strscpy() call
will trigger an invalid memory access.
Add back the missing error handling for d_path(). |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v3: Fix GICR_CTLR.RWP polling
It turns out that our polling of RWP is totally wrong when checking
for it in the redistributors, as we test the *distributor* bit index,
whereas it is a different bit number in the RDs... Oopsie boo.
This is embarassing. Not only because it is wrong, but also because
it took *8 years* to notice the blunder...
Just fix the damn thing. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: traverse devices under chunk_mutex in btrfs_can_activate_zone
btrfs_can_activate_zone() can be called with the device_list_mutex already
held, which will lead to a deadlock:
insert_dev_extents() // Takes device_list_mutex
`-> insert_dev_extent()
`-> btrfs_insert_empty_item()
`-> btrfs_insert_empty_items()
`-> btrfs_search_slot()
`-> btrfs_cow_block()
`-> __btrfs_cow_block()
`-> btrfs_alloc_tree_block()
`-> btrfs_reserve_extent()
`-> find_free_extent()
`-> find_free_extent_update_loop()
`-> can_allocate_chunk()
`-> btrfs_can_activate_zone() // Takes device_list_mutex again
Instead of using the RCU on fs_devices->device_list we
can use fs_devices->alloc_list, protected by the chunk_mutex to traverse
the list of active devices.
We are in the chunk allocation thread. The newer chunk allocation
happens from the devices in the fs_device->alloc_list protected by the
chunk_mutex.
btrfs_create_chunk()
lockdep_assert_held(&info->chunk_mutex);
gather_device_info
list_for_each_entry(device, &fs_devices->alloc_list, dev_alloc_list)
Also, a device that reappears after the mount won't join the alloc_list
yet and, it will be in the dev_list, which we don't want to consider in
the context of the chunk alloc.
[15.166572] WARNING: possible recursive locking detected
[15.167117] 5.17.0-rc6-dennis #79 Not tainted
[15.167487] --------------------------------------------
[15.167733] kworker/u8:3/146 is trying to acquire lock:
[15.167733] ffff888102962ee0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: find_free_extent+0x15a/0x14f0 [btrfs]
[15.167733]
[15.167733] but task is already holding lock:
[15.167733] ffff888102962ee0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_create_pending_block_groups+0x20a/0x560 [btrfs]
[15.167733]
[15.167733] other info that might help us debug this:
[15.167733] Possible unsafe locking scenario:
[15.167733]
[15.171834] CPU0
[15.171834] ----
[15.171834] lock(&fs_devs->device_list_mutex);
[15.171834] lock(&fs_devs->device_list_mutex);
[15.171834]
[15.171834] *** DEADLOCK ***
[15.171834]
[15.171834] May be due to missing lock nesting notation
[15.171834]
[15.171834] 5 locks held by kworker/u8:3/146:
[15.171834] #0: ffff888100050938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x1c3/0x5a0
[15.171834] #1: ffffc9000067be80 ((work_completion)(&fs_info->async_data_reclaim_work)){+.+.}-{0:0}, at: process_one_work+0x1c3/0x5a0
[15.176244] #2: ffff88810521e620 (sb_internal){.+.+}-{0:0}, at: flush_space+0x335/0x600 [btrfs]
[15.176244] #3: ffff888102962ee0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_create_pending_block_groups+0x20a/0x560 [btrfs]
[15.176244] #4: ffff8881152e4b78 (btrfs-dev-00){++++}-{3:3}, at: __btrfs_tree_lock+0x27/0x130 [btrfs]
[15.179641]
[15.179641] stack backtrace:
[15.179641] CPU: 1 PID: 146 Comm: kworker/u8:3 Not tainted 5.17.0-rc6-dennis #79
[15.179641] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1.fc35 04/01/2014
[15.179641] Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs]
[15.179641] Call Trace:
[15.179641] <TASK>
[15.179641] dump_stack_lvl+0x45/0x59
[15.179641] __lock_acquire.cold+0x217/0x2b2
[15.179641] lock_acquire+0xbf/0x2b0
[15.183838] ? find_free_extent+0x15a/0x14f0 [btrfs]
[15.183838] __mutex_lock+0x8e/0x970
[15.183838] ? find_free_extent+0x15a/0x14f0 [btrfs]
[15.183838] ? find_free_extent+0x15a/0x14f0 [btrfs]
[15.183838] ? lock_is_held_type+0xd7/0x130
[15.183838] ? find_free_extent+0x15a/0x14f0 [btrfs]
[15.183838] find_free_extent+0x15a/0x14f0 [btrfs]
[15.183838] ? _raw_spin_unlock+0x24/0x40
[15.183838] ? btrfs_get_alloc_profile+0x106/0x230 [btrfs]
[15.187601] btrfs_reserve_extent+0x131/0x260 [btrfs]
[15.
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
highmem: fix checks in __kmap_local_sched_{in,out}
When CONFIG_DEBUG_KMAP_LOCAL is enabled __kmap_local_sched_{in,out} check
that even slots in the tsk->kmap_ctrl.pteval are unmapped. The slots are
initialized with 0 value, but the check is done with pte_none. 0 pte
however does not necessarily mean that pte_none will return true. e.g.
on xtensa it returns false, resulting in the following runtime warnings:
WARNING: CPU: 0 PID: 101 at mm/highmem.c:627 __kmap_local_sched_out+0x51/0x108
CPU: 0 PID: 101 Comm: touch Not tainted 5.17.0-rc7-00010-gd3a1cdde80d2-dirty #13
Call Trace:
dump_stack+0xc/0x40
__warn+0x8f/0x174
warn_slowpath_fmt+0x48/0xac
__kmap_local_sched_out+0x51/0x108
__schedule+0x71a/0x9c4
preempt_schedule_irq+0xa0/0xe0
common_exception_return+0x5c/0x93
do_wp_page+0x30e/0x330
handle_mm_fault+0xa70/0xc3c
do_page_fault+0x1d8/0x3c4
common_exception+0x7f/0x7f
WARNING: CPU: 0 PID: 101 at mm/highmem.c:664 __kmap_local_sched_in+0x50/0xe0
CPU: 0 PID: 101 Comm: touch Tainted: G W 5.17.0-rc7-00010-gd3a1cdde80d2-dirty #13
Call Trace:
dump_stack+0xc/0x40
__warn+0x8f/0x174
warn_slowpath_fmt+0x48/0xac
__kmap_local_sched_in+0x50/0xe0
finish_task_switch$isra$0+0x1ce/0x2f8
__schedule+0x86e/0x9c4
preempt_schedule_irq+0xa0/0xe0
common_exception_return+0x5c/0x93
do_wp_page+0x30e/0x330
handle_mm_fault+0xa70/0xc3c
do_page_fault+0x1d8/0x3c4
common_exception+0x7f/0x7f
Fix it by replacing !pte_none(pteval) with pte_val(pteval) != 0. |
| IBM Aspera 5.0.0 through 5.0.13.1
could disclose sensitive user information from the system to an authenticated user due to an observable discrepancy of returned data. |
| IBM Aspera Faspex 5.0.0 through 5.0.13.1 uses a cross-domain policy file that includes domains that should not be trusted. |
| IBM Aspera Faspex 5.0.0 through 5.0.13.1 could allow a privileged user to cause a denial of service from improperly validated API input due to excessive resource consumption. |
| In the Linux kernel, the following vulnerability has been resolved:
Drivers: hv: vmbus: Fix potential crash on module unload
The vmbus driver relies on the panic notifier infrastructure to perform
some operations when a panic event is detected. Since vmbus can be built
as module, it is required that the driver handles both registering and
unregistering such panic notifier callback.
After commit 74347a99e73a ("x86/Hyper-V: Unload vmbus channel in hv panic callback")
though, the panic notifier registration is done unconditionally in the module
initialization routine whereas the unregistering procedure is conditionally
guarded and executes only if HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE capability
is set.
This patch fixes that by unconditionally unregistering the panic notifier
in the module's exit routine as well. |
| In the Linux kernel, the following vulnerability has been resolved:
Drivers: hv: vmbus: Fix initialization of device object in vmbus_device_register()
Initialize the device's dma_{mask,parms} pointers and the device's
dma_mask value before invoking device_register(). Address the
following trace with 5.17-rc7:
[ 49.646839] WARNING: CPU: 0 PID: 189 at include/linux/dma-mapping.h:543
netvsc_probe+0x37a/0x3a0 [hv_netvsc]
[ 49.646928] Call Trace:
[ 49.646930] <TASK>
[ 49.646935] vmbus_probe+0x40/0x60 [hv_vmbus]
[ 49.646942] really_probe+0x1ce/0x3b0
[ 49.646948] __driver_probe_device+0x109/0x180
[ 49.646952] driver_probe_device+0x23/0xa0
[ 49.646955] __device_attach_driver+0x76/0xe0
[ 49.646958] ? driver_allows_async_probing+0x50/0x50
[ 49.646961] bus_for_each_drv+0x84/0xd0
[ 49.646964] __device_attach+0xed/0x170
[ 49.646967] device_initial_probe+0x13/0x20
[ 49.646970] bus_probe_device+0x8f/0xa0
[ 49.646973] device_add+0x41a/0x8e0
[ 49.646975] ? hrtimer_init+0x28/0x80
[ 49.646981] device_register+0x1b/0x20
[ 49.646983] vmbus_device_register+0x5e/0xf0 [hv_vmbus]
[ 49.646991] vmbus_add_channel_work+0x12d/0x190 [hv_vmbus]
[ 49.646999] process_one_work+0x21d/0x3f0
[ 49.647002] worker_thread+0x4a/0x3b0
[ 49.647005] ? process_one_work+0x3f0/0x3f0
[ 49.647007] kthread+0xff/0x130
[ 49.647011] ? kthread_complete_and_exit+0x20/0x20
[ 49.647015] ret_from_fork+0x22/0x30
[ 49.647020] </TASK>
[ 49.647021] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix by adding FPU protection for dcn30_internal_validate_bw
[Why]
Below general protection fault observed when WebGL Aquarium is run for
longer duration. If drm debug logs are enabled and set to 0x1f then the
issue is observed within 10 minutes of run.
[ 100.717056] general protection fault, probably for non-canonical address 0x2d33302d32323032: 0000 [#1] PREEMPT SMP NOPTI
[ 100.727921] CPU: 3 PID: 1906 Comm: DrmThread Tainted: G W 5.15.30 #12 d726c6a2d6ebe5cf9223931cbca6892f916fe18b
[ 100.754419] RIP: 0010:CalculateSwathWidth+0x1f7/0x44f
[ 100.767109] Code: 00 00 00 f2 42 0f 11 04 f0 48 8b 85 88 00 00 00 f2 42 0f 10 04 f0 48 8b 85 98 00 00 00 f2 42 0f 11 04 f0 48 8b 45 10 0f 57 c0 <f3> 42 0f 2a 04 b0 0f 57 c9 f3 43 0f 2a 0c b4 e8 8c e2 f3 ff 48 8b
[ 100.781269] RSP: 0018:ffffa9230079eeb0 EFLAGS: 00010246
[ 100.812528] RAX: 2d33302d32323032 RBX: 0000000000000500 RCX: 0000000000000000
[ 100.819656] RDX: 0000000000000001 RSI: ffff99deb712c49c RDI: 0000000000000000
[ 100.826781] RBP: ffffa9230079ef50 R08: ffff99deb712460c R09: ffff99deb712462c
[ 100.833907] R10: ffff99deb7124940 R11: ffff99deb7124d70 R12: ffff99deb712ae44
[ 100.841033] R13: 0000000000000001 R14: 0000000000000000 R15: ffffa9230079f0a0
[ 100.848159] FS: 00007af121212640(0000) GS:ffff99deba780000(0000) knlGS:0000000000000000
[ 100.856240] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 100.861980] CR2: 0000209000fe1000 CR3: 000000011b18c000 CR4: 0000000000350ee0
[ 100.869106] Call Trace:
[ 100.871555] <TASK>
[ 100.873655] ? asm_sysvec_reschedule_ipi+0x12/0x20
[ 100.878449] CalculateSwathAndDETConfiguration+0x1a3/0x6dd
[ 100.883937] dml31_ModeSupportAndSystemConfigurationFull+0x2ce4/0x76da
[ 100.890467] ? kallsyms_lookup_buildid+0xc8/0x163
[ 100.895173] ? kallsyms_lookup_buildid+0xc8/0x163
[ 100.899874] ? __sprint_symbol+0x80/0x135
[ 100.903883] ? dm_update_plane_state+0x3f9/0x4d2
[ 100.908500] ? symbol_string+0xb7/0xde
[ 100.912250] ? number+0x145/0x29b
[ 100.915566] ? vsnprintf+0x341/0x5ff
[ 100.919141] ? desc_read_finalized_seq+0x39/0x87
[ 100.923755] ? update_load_avg+0x1b9/0x607
[ 100.927849] ? compute_mst_dsc_configs_for_state+0x7d/0xd5b
[ 100.933416] ? fetch_pipe_params+0xa4d/0xd0c
[ 100.937686] ? dc_fpu_end+0x3d/0xa8
[ 100.941175] dml_get_voltage_level+0x16b/0x180
[ 100.945619] dcn30_internal_validate_bw+0x10e/0x89b
[ 100.950495] ? dcn31_validate_bandwidth+0x68/0x1fc
[ 100.955285] ? resource_build_scaling_params+0x98b/0xb8c
[ 100.960595] ? dcn31_validate_bandwidth+0x68/0x1fc
[ 100.965384] dcn31_validate_bandwidth+0x9a/0x1fc
[ 100.970001] dc_validate_global_state+0x238/0x295
[ 100.974703] amdgpu_dm_atomic_check+0x9c1/0xbce
[ 100.979235] ? _printk+0x59/0x73
[ 100.982467] drm_atomic_check_only+0x403/0x78b
[ 100.986912] drm_mode_atomic_ioctl+0x49b/0x546
[ 100.991358] ? drm_ioctl+0x1c1/0x3b3
[ 100.994936] ? drm_atomic_set_property+0x92a/0x92a
[ 100.999725] drm_ioctl_kernel+0xdc/0x149
[ 101.003648] drm_ioctl+0x27f/0x3b3
[ 101.007051] ? drm_atomic_set_property+0x92a/0x92a
[ 101.011842] amdgpu_drm_ioctl+0x49/0x7d
[ 101.015679] __se_sys_ioctl+0x7c/0xb8
[ 101.015685] do_syscall_64+0x5f/0xb8
[ 101.015690] ? __irq_exit_rcu+0x34/0x96
[How]
It calles populate_dml_pipes which uses doubles to initialize.
Adding FPU protection avoids context switch and probable loss of vba context
as there is potential contention while drm debug logs are enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
udmabuf: validate ubuf->pagecount
Syzbot has reported GPF in sg_alloc_append_table_from_pages(). The
problem was in ubuf->pages == ZERO_PTR.
ubuf->pagecount is calculated from arguments passed from user-space. If
user creates udmabuf with list.size == 0 then ubuf->pagecount will be
also equal to zero; it causes kmalloc_array() to return ZERO_PTR.
Fix it by validating ubuf->pagecount before passing it to
kmalloc_array(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/plane: Move range check for format_count earlier
While the check for format_count > 64 in __drm_universal_plane_init()
shouldn't be hit (it's a WARN_ON), in its current position it will then
leak the plane->format_types array and fail to call
drm_mode_object_unregister() leaking the modeset identifier. Move it to
the start of the function to avoid allocating those resources in the
first place. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/secretmem: fix panic when growing a memfd_secret
When one tries to grow an existing memfd_secret with ftruncate, one gets
a panic [1]. For example, doing the following reliably induces the
panic:
fd = memfd_secret();
ftruncate(fd, 10);
ptr = mmap(NULL, 10, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
strcpy(ptr, "123456789");
munmap(ptr, 10);
ftruncate(fd, 20);
The basic reason for this is, when we grow with ftruncate, we call down
into simple_setattr, and then truncate_inode_pages_range, and eventually
we try to zero part of the memory. The normal truncation code does this
via the direct map (i.e., it calls page_address() and hands that to
memset()).
For memfd_secret though, we specifically don't map our pages via the
direct map (i.e. we call set_direct_map_invalid_noflush() on every
fault). So the address returned by page_address() isn't useful, and
when we try to memset() with it we panic.
This patch avoids the panic by implementing a custom setattr for
memfd_secret, which detects resizes specifically (setting the size for
the first time works just fine, since there are no existing pages to try
to zero), and rejects them with EINVAL.
One could argue growing should be supported, but I think that will
require a significantly more lengthy change. So, I propose a minimal
fix for the benefit of stable kernels, and then perhaps to extend
memfd_secret to support growing in a separate patch.
[1]:
BUG: unable to handle page fault for address: ffffa0a889277028
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD afa01067 P4D afa01067 PUD 83f909067 PMD 83f8bf067 PTE 800ffffef6d88060
Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
CPU: 0 PID: 281 Comm: repro Not tainted 5.17.0-dbg-DEV #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:memset_erms+0x9/0x10
Code: c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 f3 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 <f3> aa 4c 89 c8 c3 90 49 89 fa 40 0f b6 ce 48 b8 01 01 01 01 01 01
RSP: 0018:ffffb932c09afbf0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffda63c4249dc0 RCX: 0000000000000fd8
RDX: 0000000000000fd8 RSI: 0000000000000000 RDI: ffffa0a889277028
RBP: ffffb932c09afc00 R08: 0000000000001000 R09: ffffa0a889277028
R10: 0000000000020023 R11: 0000000000000000 R12: ffffda63c4249dc0
R13: ffffa0a890d70d98 R14: 0000000000000028 R15: 0000000000000fd8
FS: 00007f7294899580(0000) GS:ffffa0af9bc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffa0a889277028 CR3: 0000000107ef6006 CR4: 0000000000370ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? zero_user_segments+0x82/0x190
truncate_inode_partial_folio+0xd4/0x2a0
truncate_inode_pages_range+0x380/0x830
truncate_setsize+0x63/0x80
simple_setattr+0x37/0x60
notify_change+0x3d8/0x4d0
do_sys_ftruncate+0x162/0x1d0
__x64_sys_ftruncate+0x1c/0x20
do_syscall_64+0x44/0xa0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Modules linked in: xhci_pci xhci_hcd virtio_net net_failover failover virtio_blk virtio_balloon uhci_hcd ohci_pci ohci_hcd evdev ehci_pci ehci_hcd 9pnet_virtio 9p netfs 9pnet
CR2: ffffa0a889277028
[lkp@intel.com: secretmem_iops can be static]
[axelrasmussen@google.com: return EINVAL] |
| In the Linux kernel, the following vulnerability has been resolved:
mm: fix unexpected zeroed page mapping with zram swap
Two processes under CLONE_VM cloning, user process can be corrupted by
seeing zeroed page unexpectedly.
CPU A CPU B
do_swap_page do_swap_page
SWP_SYNCHRONOUS_IO path SWP_SYNCHRONOUS_IO path
swap_readpage valid data
swap_slot_free_notify
delete zram entry
swap_readpage zeroed(invalid) data
pte_lock
map the *zero data* to userspace
pte_unlock
pte_lock
if (!pte_same)
goto out_nomap;
pte_unlock
return and next refault will
read zeroed data
The swap_slot_free_notify is bogus for CLONE_VM case since it doesn't
increase the refcount of swap slot at copy_mm so it couldn't catch up
whether it's safe or not to discard data from backing device. In the
case, only the lock it could rely on to synchronize swap slot freeing is
page table lock. Thus, this patch gets rid of the swap_slot_free_notify
function. With this patch, CPU A will see correct data.
CPU A CPU B
do_swap_page do_swap_page
SWP_SYNCHRONOUS_IO path SWP_SYNCHRONOUS_IO path
swap_readpage original data
pte_lock
map the original data
swap_free
swap_range_free
bd_disk->fops->swap_slot_free_notify
swap_readpage read zeroed data
pte_unlock
pte_lock
if (!pte_same)
goto out_nomap;
pte_unlock
return
on next refault will see mapped data by CPU B
The concern of the patch would increase memory consumption since it
could keep wasted memory with compressed form in zram as well as
uncompressed form in address space. However, most of cases of zram uses
no readahead and do_swap_page is followed by swap_free so it will free
the compressed form from in zram quickly. |
