| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dax/fsdev: clear vmemmap_shift when binding static pgmap
Clear pgmap->vmemmap_shift for static DAX devices. When rebinding a static
device from device_dax (which may set vmemmap_shift based on alignment) to
fsdev_dax, the stale vmemmap_shift persists on the shared pgmap. Explicitly
zero it before devm_memremap_pages() so the vmemmap is built for order-0
folios as fsdev requires. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: clear stale xarray tags on folios skipped during writeback
In data=journal mode, the writeback thread can hit the
WARN_ON_ONCE(sb_rdonly(sb)) in ext4_journal_check_start() while the
superblock is being remounted read-only during reboot:
Workqueue: writeback wb_workfn (flush-253:0)
RIP: 0010:ext4_journal_check_start+0x8b/0xd0
Call Trace:
__ext4_journal_start_sb+0x3c/0x1e0
mpage_prepare_extent_to_map+0x4af/0x580
ext4_do_writepages+0x3c0/0x1080
ext4_writepages+0xc8/0x1a0
do_writepages+0xc4/0x180
__writeback_single_inode+0x45/0x2f0
writeback_sb_inodes+0x26b/0x5d0
__writeback_inodes_wb+0x54/0x100
wb_writeback+0x1ac/0x320
wb_workfn+0x394/0x470
And followed by the warning:
EXT4-fs warning (device vda1): ext4_evict_inode:195: inode #6263:
comm (sd-umount): data will be lost
This issue is not reproduced every time, but frequently.
The reproduction step is to create a VM with 8 CPUs, 16G memory and
setup data=journal:
sudo tune2fs -o journal_data /dev/vda1
Run fio:
rm -f fiotest
fio --name=fiotest --rw=randwrite --bs=4k --runtime=6 --ioengine=libaio
--iodepth=256 --numjobs=8 --filename=fiotest --filesize=30G
--group_reporting
Reboot the VM, and check the console output from:
virsh console testvm
But there is no dirty inode, folio_clear_dirty_for_io clears PG_dirty
but leaves tags PAGECACHE_TAG_DIRTY and PAGECACHE_TAG_TOWRITE set which
are only cleared by __folio_start_writeback.
In data=journal mode, jbd2 checkpoints the journalled data to its final
location and clears its own dirty flag without touching folio PG_dirty
or xarray dirty flags.
The commit f4a2b42e7891 ("ext4: fix stale xarray tags after writeback")
fixes when PG_dirty is still set but there is no dirty page.
Another case is PG_dirty is cleared, but PAGECACHE_TAG_DIRTY and
PAGECACHE_TAG_TOWRITE is still set. In this case, writeback thread
checks clean folio and skips it in mpage_prepare_extent_to_map:
if (!folio_test_dirty(folio) ||
...
folio_unlcok(folio);
continue
And never reaches ext4_bio_write_folio where the commit f4a2b42e7891
clears the stale xarray tags. Print debug logs after the filesystem
is remounted read-only:
writepages RDONLY nrpages=2048 dirtytag=1 wbtag=0 towrite=1 sync=0
And all folios are actually clean:
folio idx=3 dirty=0 wb=0 checked=0 dirtybuf=0 jbddirty=0 mapped=1
...
We need to clear the xarray stale tags for such clean folios by
cycling them through writeback in the skip path, the same way
f4a2b42e7891 does in ext4_bio_write_folio. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Preserve unique-field state across nested structs
btf_find_struct_field() initializes a fresh seen mask for every recursive
descent. Unique special fields in different levels of the same aggregate
therefore do not see one another. The duplicate fields can reach
btf_parse_fields(), where they trigger an invariant WARN_ON_ONCE(). A
crafted user BTF can consequently trigger the warning before map creation
checks capabilities.
Initialize the seen mask once in btf_find_field() and pass the same pointer
through struct, datasec, and nested-struct walks. This gives the entire field
traversal one shared uniqueness state. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Don't run the error ISR before probe sets up vintfs
__tegra241_cmdqv_probe() requests the error IRQ before it has allocated the
cmdqv->vintfs array and set cmdqv->num_vintfs. A CMDQV left enabled with a
latched error across a kexec fires the IRQ as soon as it is requested, and
tegra241_cmdqv_isr() then walks the uninitialized cmdqv->vintfs array.
Request the IRQ only after cmdqv->vintfs is allocated and zeroed, so that
a latched interrupt firing early runs the ISR against a valid array of NULL
slots that it safely skips. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: bound TLV walk in mt7996_mcu_get_chip_config
The response TLV loop advanced by tlv->len without a minimum, so a
theoretical firmware response containing a zero-length TLV could spin
forever, hanging the CPU during device probe.
The u32 payload was also read without bounds checking.
Reject a short fixed field, stop on a TLV whose length underruns the
header or overruns the skb. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: dw: avoid shift-out-of-bounds when DAA assigns no devices
On an empty bus ENTDAA assigns nothing, so cmd->rx_len (the count
of addresses left unassigned) equals master->maxdevs.
The GENMASK() index master->maxdevs - cmd->rx_len - 1 then becomes -1,
which trips up UBSAN. This happens every time on boot on a Gigabyte/AMD
server:
UBSAN: shift-out-of-bounds in drivers/i3c/master/dw-i3c-master.c:905:12
shift exponent 64 is too large for 64-bit type 'long unsigned int'
CPU: 7 UID: 0 PID: 963 Comm: (udev-worker) Not tainted 7.0.11-200.fc44.x86_64 #1 PREEMPT(lazy)
Hardware name: Giga Computing E163-Z34-AAH1-000/MZ33-DC1-000, BIOS R32_F45 04/01/2026
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
ubsan_epilogue+0x5/0x2b
__ubsan_handle_shift_out_of_bounds.cold+0xd7/0x1ab
dw_i3c_master_daa.cold+0x1b/0x96 [dw_i3c_master]
i3c_master_do_daa_ext.part.0+0x3e/0xf0 [i3c]
Skip the mask when no new device was assigned. |
| In the Linux kernel, the following vulnerability has been resolved:
md/bitmap: resume array on backlog_store() error path
backlog_store() suspends the array before checking whether a write-mostly
device exists. If no such device exists, the error path only unlocks
reconfig_mutex and leaves the array suspended, blocking subsequent I/O.
Use mddev_unlock_and_resume() to release both states. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: replace forgeable discard filler with a keyed sector marker
The discard-block check in dm_integrity_rw_tag() treats a stored tag
of all 0xf6 bytes (DISCARD_FILLER) as proof a block was discarded and
skips HMAC verification. allow_discards is only accepted in
dm-integrity's standalone mode. An attacker with raw write access to
the backing device, but without the integrity key, can stamp any block
with an all-0xf6 tag and have it served as authentic.
Add a new "allow_discards_keyed" target argument that marks discarded
blocks with a keyed checksum of (salt || sector) instead, computed by
integrity_discard_checksum(). |
| In the Linux kernel, the following vulnerability has been resolved:
phy: qcom: qmp-usb-legacy: Fix possible NULL-deref on early runtime suspend
There is a small window where the runtime suspend callback may run
after pm_runtime_enable() and before pm_runtime_forbid(). In this
case, a crash occurs because runtime suspend/resume dereferences
qmp->phy pointer, which is not yet initialized:
`if (!qmp->phy->init_count) {`
This can also happen if user re-enables runtime-pm via the sysfs
attribute before qmp phy is initialized.
Similarly to other qcom phy drivers, introduce a qmp->phy_initialized
variable that can be used to avoid relying on the possibly uninitialized
phy pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: 9484/1: enable interrupts when unhandled user faults are triggered
PREEMPT_RT requires interrupts to be enabled when sending signals.
When do_DataAbort()/do_PrefetchAbort() triggers unhandled user faults,
that is `inf->fn()` return a non-zero value, and the interrupts are not
enabled within the hook function, force_sig_fault() will be called
with interrupts disabled.
This can be triggered by user programs executing the bkpt instruction,
with kernel config CONFIG_PERF_EVENTS=n.
Enable interrupts in do_DataAbort()/do_PrefetchAbort() when unhandled
user faults are triggered to fix the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Release the export reference when reaping open stateids
nfs4_put_stid() releases the svc_export tracked in
nfs4_stid.sc_export, but free_ol_stateid_reaplist() frees open and
lock stateids by calling ->sc_free() directly, bypassing that path.
An open stateid takes an sc_export reference in nfs4_open() and a
lock stateid takes its own in init_lock_stateid(); both reach
free_ol_stateid_reaplist() through their normal teardown, the open
stateid via release_open_stateid() and the lock stateid via
nfsd4_release_lockowner(), each through put_ol_stateid_locked().
The reference is therefore never dropped, pinning the export and
blocking unmount for the lifetime of the stateid.
Release sc_export in free_ol_stateid_reaplist() the way
nfs4_put_stid() does. ->sc_free() runs once per stateid, and a
stateid reaches free_ol_stateid_reaplist() or nfs4_put_stid() but
never both, so the reference is dropped exactly once. Revoked
stateids reach this path with sc_export already cleared by
drop_stid_export(), so they are skipped rather than double-freed.
nfs4_put_stid() itself read sc_export before acquiring cl_lock.
drop_stid_export() clears that field and releases the reference
under cl_lock, so a concurrent revocation could drop the export in
the window between the read and the final put, releasing the same
reference twice. Read sc_export while cl_lock is held so the two
paths serialize and the reference is released exactly once. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv, bpf: Fix missing sign-ext for signed 1-byte and 2-byte kfunc args
On RV64, the ABI requires sign-extension for signed 1-byte and 2-byte kfunc
args. However, the RV64 JIT currently does not perform sign-extension for
such kfunc args.
Before commit 7ce090afbf72 ("bpf: Infer zext_dst based on static register
liveness analysis"), state pruning could potentially omit zero-extension
of 32-bit subregisters, which inadvertently masked the above issue by making
the args appear as if they had been properly sign-extended. After that
commit, the problem is exposed, causing the kfunc_call/kfunc_call_test4
selftest to fail.
Fix this by extending the existing sign-extension logic to handle signed
1-byte and 2-byte kfunc args as well. |
| vm2 versions 3.10.2 through 3.11.6 contain a sandbox escape vulnerability on Node.js 26 where Promise.prototype.finally() bypasses vm2's wrapper protections due to a stale PromiseThenLookupChain protector in V8 14.6. Attackers can exploit this by creating an async function that returns a Promise with an attacker-controlled constructor Symbol.species, allowing them to reach the host Function constructor and process object for arbitrary code execution. |
| vm2 versions 3.11.3 through 3.11.6 expose Node.js's host node:sqlite module to code running in NodeVM when that builtin is permitted, either explicitly or through builtin: ['*']. The module is wrapped with vm.readonly(), which prevents property assignment but leaves host-authority callables reachable; in addition, the resolver treats any request starting with 'node:' as a core-module request and the runtime strips only one 'node:' prefix, so a sandbox request for 'node:node:sqlite' resolves to the configured node:sqlite entry. Sandboxed code can therefore create an in-memory DatabaseSync with extension loading enabled and call DatabaseSync.loadExtension() on a native library bundled in the untrusted plugin package (path derived from __dirname). SQLite loads the library into the Node.js host process and invokes its native entry point, giving the sandboxed plugin arbitrary native code execution outside the sandbox with the host process's privileges. The issue is fixed in vm2 3.11.7. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/efi: Avoid voluntary preemption with efi_mm installed
Gus reports a bad kernel memory access when using software PAN
(CONFIG_ARM64_SW_TTBR0_PAN=y) on a machine with support for EFI runtime
services:
Unable to handle kernel access to user memory outside uaccess routines
at virtual address 00000000f322ff30
Mem abort info:
ESR = 0x0000000096000004
FSC = 0x04: level 0 translation fault
Internal error: Oops: 0000000096000004 [#1] SMP
Workqueue: efi_rts_wq efi_call_rts
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : efi_call_rts+0xd8/0x288
Call trace:
efi_call_rts+0xd8/0x288 (P)
process_one_work+0x178/0x4f8
worker_thread+0x194/0x328
This is because the fpsimd context management code called from
__efi_fpsimd_begin() can preempt voluntarily, returning later to the EFI
code with an incorrect value for TTBR0_EL1 thanks to the deferred mm
switching used by the software PAN implementation.
Since EFI runtime services cannot preempt voluntarily and because the
fpsimd switching code does not rely on the TTBR0_EL1 mappings, simply
reorder the fpsimd switch so that it occurs before we change the
page-table. |
| The LatePoint – Calendar Booking Plugin for Appointments and Events plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 5.6.3 via the LatePointAbilityDeleteBooking::execute due to missing validation on a user controlled key. This makes it possible for attackers, with LatePoint Agent-level access and above, to read bookings and customer PII (full name, email, phone, and notes) assigned to other LatePoint agents, and delete arbitrary bookings by supplying any booking ID. This vulnerability is only exploitable when an administrator has enabled the Abilities API toggles (latepoint_abilities_api, latepoint_abilities_api_delete, and/or latepoint_abilities_api_edit) in the plugin settings. |
| Docs before 5.4.1 fails to properly revoke websocket collaboration connections when access is revoked at parent documents. Attackers with revoked access can retain real-time read and write access to sub-documents through open websocket sessions that are never disconnected. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: invalidate the correct range after O_APPEND direct write
fuse_direct_write_iter() captures pos before generic_write_checks(),
which moves ki_pos to EOF for O_APPEND writes:
fuse_direct_write_iter()
{
pos = iocb->ki_pos; /* 0 (user-supplied) */
generic_write_checks(); /* ki_pos -> EOF */
fuse_direct_io(); /* writes at EOF, correct */
invalidate(pos, pos + res); /* [0, res) -- wrong */
}
The post-write invalidation targets a stale range instead of the
actual written range at EOF.
This can cause data inconsistency when the file size is not
page-aligned. The tail page straddling EOF has a valid portion
before EOF that concurrent readers can fault back in during the
DIO write window:
Tail page (file size X not page-aligned):
page_start X (EOF) page_end
|--- valid data ----|-- stale --|
CPU0 (O_APPEND DIO writer) CPU1 (buffered reader)
-------------------------- ----------------------
invalidate [X, X+len)
tail page evicted
FUSE_WRITE in flight ...
read [page_start, X)
tail page re-faulted
[X, page_end) = stale
FUSE_WRITE completes
i_size = X + len
invalidate [0, len) <- WRONG
tail page still cached
read [X, X+len)
hits stale tail page
returns old data
Fix by reading pos back from iocb->ki_pos after generic_write_checks(),
as generic_file_direct_write() does.
Also fix a typo in the comment ("may have" -> "may have competed"). |
| The OpenFeature Operator allows users to expose feature flags to applications. In version 0.9.2 and earlier, a tenant who can create a controller-owned workload can use the openfeature.dev/featureflagsource annotation with NAMESPACE/NAME syntax to reference a FeatureFlagSource or InProcessConfiguration in another namespace. On multi-tenant clusters that use namespaces as trust boundaries, the cluster-scoped operator reads that resource and materializes spec.envVars literal values, spec.httpSyncBearerToken, sync URIs, and supporting ConfigMaps into the tenant's workload. Single-tenant clusters are not impacted, secretKeyRef and configMapKeyRef values remain namespace-local, and creating a FeatureFlagSource is not required. |
| Mealie before 3.21.0 fails to validate user ownership in the ratings and favorites endpoints, allowing authenticated attackers to read any user's recipe ratings and favorites by specifying arbitrary user IDs in the URL path. Attackers can access private recipe identifiers, rating values, and favorite flags belonging to other users across different groups or households. |
