| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: handle rbtree insertion error in decode_choose_args()
A message of type CEPH_MSG_OSD_MAP contains an OSD map that itself
contains a CRUSH map. The received CRUSH map may optionally contain
choose_args that get decoded in decode_choose_args(). In this function,
num_choose_arg_maps is read from the message, and a corresponding number
of crush_choose_arg_maps gets decoded afterwards. Each
crush_choose_arg_map has a choose_args_index, which serves as the key
when inserting it into the choose_args rbtree of the decoded crush_map.
If a (potentially corrupted) message contains two crush_choose_arg_maps
with the same index, the assertion in insert_choose_arg_map() triggers a
kernel BUG when trying to insert the second crush_choose_arg_map.
This patch fixes the issue by switching to the non-asserting rbtree
insertion function and rejecting the message if the insertion fails.
[ idryomov: changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix oops due to out of scope access
Below oops triggers when kill QEMU process:
Oops: general protection fault, probably for non-canonical address 0x7fffffff844eaaa7: 0000 [#1] SMP NOPTI
Call Trace:
<TASK>
do_raw_spin_lock+0xaa/0xc0
_raw_spin_lock_irqsave+0x21/0x40
domain_remove_dev_pasid+0x52/0x160
intel_nested_set_dev_pasid+0x1b9/0x1e0
__iommu_set_group_pasid+0x56/0x120
pci_dev_reset_iommu_done+0xe3/0x180
pcie_flr+0x65/0x160
__pci_reset_function_locked+0x5b/0x120
vfio_pci_core_close_device+0x63/0xe0 [vfio_pci_core]
vfio_df_close+0x4f/0xa0
vfio_df_unbind_iommufd+0x2d/0x60
vfio_device_fops_release+0x3e/0x40
__fput+0xe5/0x2c0
task_work_run+0x58/0xa0
do_exit+0x2c8/0x600
do_group_exit+0x2f/0xa0
get_signal+0x863/0x8c0
arch_do_signal_or_restart+0x24/0x100
exit_to_user_mode_loop+0x87/0x380
do_syscall_64+0x2ff/0x11e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The global static blocked domain is a dummy domain without corresponding
dmar_domain structure, accessing beyond iommu_domain structure triggers
oops easily. Fix it by return early in domain_remove_dev_pasid() like
identity domain. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/dma-buf: handle empty bo and UAF races
There look to be some nasty races here when triggering the
invalidate_mappings hook:
1) We do xe_bo_alloc() followed by the attach, before the actual full bo
init step in xe_dma_buf_init_obj(). However the bo is visible on the
attachments list after the attach. This is bad since exporter driver,
say amdgpu, can at any time call back into our invalidate_mappings hook,
with an empty/bogus bo, leading to potential bugs/crashes.
2) Similar to 1) but here we get a UAF, when the invalidate_mappings
hook is triggered. For example, we get as far as xe_bo_init_locked()
but this fails in some way. But here the bo will be freed on error, but
we still have it attached from dma-buf pov, so if the
invalidate_mappings is now triggered then the bo we access is gone and
we trigger UAF and more bugs/crashes.
To fix this, move the attach step until after we actually have a fully
set up buffer object. Note that the bo is not published to userspace
until later, so not sure what the comment "Don't publish the bo
until we have a valid attachment", is referring to.
We have at least two different customers reporting hitting a NULL ptr
deref in evict_flags when importing something from amdgpu, followed by
triggering the evict flow. Hit rate is also pretty low, which would
hint at some kind of race, so something like 1) or 2) might explain
this.
v2:
- Shuffle the order of the ops slightly (no functional change)
- Improve the comment to better explain the ordering (Matt B)
(cherry picked from commit af1f2ad0c59fe4e2f924c526f66e968289d77971) |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: fix refcount saturation and potential UAF in qrtr_port_remove
In qrtr_port_remove(), the socket reference count is decremented via
__sock_put() before the port is removed from the qrtr_ports XArray and
before the RCU grace period elapses.
This breaks the fundamental RCU update paradigm. It exposes a race
window where a concurrent RCU reader (such as qrtr_reset_ports() or
qrtr_port_lookup()) can obtain a pointer to the socket from the XArray,
and attempt to call sock_hold() on a socket whose reference count has
already dropped to zero.
This exact race condition was hit during syzkaller fuzzing, leading to
the following refcount saturation warning and a potential Use-After-Free:
refcount_t: saturated; leaking memory.
WARNING: CPU: 3 PID: 1273 at lib/refcount.c:22 refcount_warn_saturate+0xae/0x1d0
Modules linked in: qrtr(+) bochs drm_shmem_helper ...
Call Trace:
<TASK>
qrtr_reset_ports net/qrtr/af_qrtr.c:768 [inline] [qrtr]
__qrtr_bind.isra.0+0x48b/0x570 net/qrtr/af_qrtr.c:805 [qrtr]
qrtr_bind+0x17d/0x210 net/qrtr/af_qrtr.c:901 [qrtr]
kernel_bind+0xe4/0x120 net/socket.c:3592
qrtr_ns_init+0x1a6/0x380 net/qrtr/ns.c:715 [qrtr]
qrtr_proto_init+0x3b/0xff0 net/qrtr/af_qrtr.c:169 [qrtr]
do_one_initcall+0xf5/0x5e0 init/main.c:1283
...
</TASK>
Fix this by deferring the reference count decrement until after the
xa_erase() and the synchronize_rcu() complete.
(Note: The v1 of this patch incorrectly replaced __sock_put() with
sock_put(). As Simon Horman pointed out, the callers of qrtr_port_remove()
still hold a reference to the socket, so freeing the socket memory here
would lead to a subsequent UAF in the caller. Thus, the __sock_put() is
kept, but only repositioned to close the RCU race.) |
| In the Linux kernel, the following vulnerability has been resolved:
fs/fcntl: fix SOFTIRQ-unsafe lock order in fasync signaling
A SOFTIRQ-safe to SOFTIRQ-unsafe lock order deadlock can occur in
send_sigio() and send_sigurg() when a process group receives a signal.
When FASYNC is configured for a process group (PIDTYPE_PGID), both
functions use read_lock(&tasklist_lock) to traverse the task list.
However, they are frequently called from softirq context:
- send_sigio() via input_inject_event -> kill_fasync
- send_sigurg() via tcp_check_urg -> sk_send_sigurg (NET_RX_SOFTIRQ)
The deadlock is caused by the rwlock writer fairness mechanism:
1. CPU 0 (process context) holds read_lock(&tasklist_lock) in do_wait().
2. CPU 1 (process context) attempts write_lock(&tasklist_lock) in
fork() or exit() and spins, which blocks all new readers.
3. CPU 0 is interrupted by a softirq (e.g., TCP URG packet reception).
4. The softirq calls send_sigurg() and attempts to acquire
read_lock(&tasklist_lock), deadlocking because CPU 1 is waiting.
Since PID hashing and do_each_pid_task() traversals are already
RCU-protected, the read_lock on tasklist_lock is no longer strictly
required for safe traversal. Fix this by replacing tasklist_lock with
rcu_read_lock(), aligning the process group signaling path with the
single-PID path. This also mitigates a potential remote denial of
service vector via TCP URG packets.
Lockdep splat:
=====================================================
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
[...]
Chain exists of:
&dev->event_lock --> &f_owner->lock --> tasklist_lock
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(tasklist_lock);
local_irq_disable();
lock(&dev->event_lock);
lock(&f_owner->lock);
<Interrupt>
lock(&dev->event_lock);
*** DEADLOCK *** |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "wireguard: device: enable threaded NAPI"
This reverts commit 933466fc50a8e4eb167acbd0d8ec96a078462e9c which is
commit db9ae3b6b43c79b1ba87eea849fd65efa05b4b2e upstream.
We have had three independent production user reports in combination
with Cilium utilizing WireGuard as encryption underneath that k8s Pod
E/W traffic to certain peer nodes fully stalled. The situation appears
as follows:
- Occurs very rarely but at random times under heavy networking load.
- Once the issue triggers the decryption side stops working completely
for that WireGuard peer, other peers keep working fine. The stall
happens also for newly initiated connections towards that particular
WireGuard peer.
- Only the decryption side is affected, never the encryption side.
- Once it triggers, it never recovers and remains in this state,
the CPU/mem on that node looks normal, no leak, busy loop or crash.
- bpftrace on the affected system shows that wg_prev_queue_enqueue
fails, thus the MAX_QUEUED_PACKETS (1024 skbs!) for the peer's
rx_queue is reached.
- Also, bpftrace shows that wg_packet_rx_poll for that peer is never
called again after reaching this state for that peer. For other
peers wg_packet_rx_poll does get called normally.
- Commit db9ae3b ("wireguard: device: enable threaded NAPI")
switched WireGuard to threaded NAPI by default. The default has
not been changed for triggering the issue, neither did CPU
hotplugging occur (i.e. 5bd8de2 ("wireguard: queueing: always
return valid online CPU in wg_cpumask_choose_online()")).
- The issue has been observed with stable kernels of v5.15 as well as
v6.1. It was reported to us that v5.10 stable is working fine, and
no report on v6.6 stable either (somewhat related discussion in [0]
though).
- In the WireGuard driver the only material difference between v5.10
stable and v5.15 stable is the switch to threaded NAPI by default.
[0] https://lore.kernel.org/netdev/CA+wXwBTT74RErDGAnj98PqS=wvdh8eM1pi4q6tTdExtjnokKqA@mail.gmail.com/
Breakdown of the problem:
1) skbs arriving for decryption are enqueued to the peer->rx_queue in
wg_packet_consume_data via wg_queue_enqueue_per_device_and_peer.
2) The latter only moves the skb into the MPSC peer queue if it does
not surpass MAX_QUEUED_PACKETS (1024) which is kept track in an
atomic counter via wg_prev_queue_enqueue.
3) In case enqueueing was successful, the skb is also queued up
in the device queue, round-robin picks a next online CPU, and
schedules the decryption worker.
4) The wg_packet_decrypt_worker, once scheduled, picks these up
from the queue, decrypts the packets and once done calls into
wg_queue_enqueue_per_peer_rx.
5) The latter updates the state to PACKET_STATE_CRYPTED on success
and calls napi_schedule on the per peer->napi instance.
6) NAPI then polls via wg_packet_rx_poll. wg_prev_queue_peek checks
on the peer->rx_queue. It will wg_prev_queue_dequeue if the
queue->peeked skb was not cached yet, or just return the latter
otherwise. (wg_prev_queue_drop_peeked later clears the cache.)
7) From an ordering perspective, the peer->rx_queue has skbs in order
while the device queue with the per-CPU worker threads from a
global ordering PoV can finish the decryption and signal the skb
PACKET_STATE_CRYPTED out of order.
8) A situation can be observed that the first packet coming in will
be stuck waiting for the decryption worker to be scheduled for
a longer time when the system is under pressure.
9) While this is the case, the other CPUs in the meantime finish
decryption and call into napi_schedule.
10) Now in wg_packet_rx_poll it picks up the first in-order skb
from the peer->rx_queue and sees that its state is still
PACKET_STATE_UNCRYPTED. The NAPI poll routine then exits e
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: espintcp: do not reuse an in-progress partial send
espintcp keeps a single in-flight transmit in ctx->partial.
Before building a new sk_msg, espintcp_sendmsg() first tries to flush
that state through espintcp_push_msgs().
For blocking callers, espintcp_push_msgs() may return success even when
the previous partial send is still pending. espintcp_sendmsg() would
then reinitialize emsg->skmsg and reuse ctx->partial while the old
transfer still owns that state.
Do not rebuild the send message when ctx->partial is still in progress.
If espintcp_push_msgs() returns with emsg->len still set, fail the new
send instead of overwriting the live partial state.
This is a memory-safety fix: reusing the live partial-send state can
leave a stale offset attached to a new sk_msg and lead to an out-of-
bounds read in the send path.
tcp_sendmsg_locked() already handles waiting for send buffer memory, so
the fix here is just to preserve espintcp's one-message-at-a-time
transmit state. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/poll: fix signed comparison in io_poll_get_ownership()
io_poll_get_ownership() uses a signed comparison to check whether
poll_refs has reached the threshold for the slowpath:
if (unlikely(atomic_read(&req->poll_refs) >= IO_POLL_REF_BIAS))
atomic_read() returns int (signed). When IO_POLL_CANCEL_FLAG
(BIT(31)) is set in poll_refs, the value becomes negative in
signed arithmetic, so the >= 128 comparison always evaluates to
false and the slowpath is never taken.
Fix this by casting the atomic_read() result to unsigned int
before the comparison, so that the cancel flag is treated as a
large positive value and correctly triggers the slowpath. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tp_meter: avoid use of uninit sender vars
batadv_tp_recv_ack() and batadv_tp_stop() are only valid for tp_vars in the
BATADV_TP_SENDER role. When called with a BATADV_TP_RECEIVER role, it
proceeds to read sender-only members that were never initialized, leading
to undefined behavior.
This can be triggered when a node that is currently acting as a receiver in
an ongoing tp_meter session receives a malicious ACK packet.
Guard against this by checking tp_vars->role immediately after the
lookup and bailing out if it is not BATADV_TP_SENDER, before any of
those members are accessed. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: purge outqueue on stale COOKIE-ECHO handling
sctp_stream_update() is only invoked when the association is moved into
COOKIE_WAIT during association setup/reconfiguration. In this path, the
outbound stream scheduler state (stream->out_curr) is expected to be
clean, since no user data should have been transmitted yet unless the
state machine has already partially progressed.
However, a corner case exists in sctp_sf_do_5_2_6_stale(): when a
Stale Cookie ERROR is received, the association is rolled back from
COOKIE_ECHOED to COOKIE_WAIT. In this scenario, user data may already
have been queued and even bundled with the COOKIE-ECHO chunk.
During the rollback, sctp_stream_update() frees the old stream table
and installs a new one, but it does not invalidate stream->out_curr.
As a result, out_curr may still point to a freed sctp_stream_out
entry from the previous stream state.
Later, SCTP scheduler dequeue paths (FCFS, RR, PRIO, etc.) rely on
stream->out_curr->ext, which can lead to use-after-free once the old
stream state has been released via sctp_stream_free().
This results in crashes such as (reported by Yuqi):
BUG: KASAN: slab-use-after-free in sctp_sched_fcfs_dequeue+0x13a/0x140
Read of size 8 at addr ff1100004d4d3208 by task mini_poc/9312
CPU: 1 UID: 1001 PID: 9312 Comm: mini_poc Not tainted
7.1.0-rc1-00305-gbd3a4795d574 #5 PREEMPT(full)
sctp_sched_fcfs_dequeue+0x13a/0x140
sctp_outq_flush+0x1603/0x33e0
sctp_do_sm+0x31c9/0x5d30
sctp_assoc_bh_rcv+0x392/0x6f0
sctp_inq_push+0x1db/0x270
sctp_rcv+0x138d/0x3c10
Fix this by fully purging the association outqueue when handling the
Stale Cookie case. This ensures all pending transmit and retransmit
state is dropped, and any scheduler cached pointers are invalidated,
making it safe to rebuild stream state during COOKIE_WAIT restart.
Updating only stream->out_curr would be insufficient, since queued
and retransmittable data would still reference the old stream state and
trigger later use-after-free in dequeue paths. |
| In the Linux kernel, the following vulnerability has been resolved:
ipc: limit next_id allocation to the valid ID range
The checkpoint/restore sysctl path can request the next SysV IPC id
through ids->next_id. ipc_idr_alloc() currently forwards that request to
idr_alloc() with an open-ended upper bound.
If the valid tail of the SysV IPC id space is full, the allocation can
spill beyond ipc_mni. The returned SysV IPC id still uses the normal
index encoding, so later lookup and removal can target the wrong slot.
This leaves the real IDR entry behind and breaks the IDR state for the
object.
The bug is in ipc_idr_alloc() in the checkpoint/restore path.
1. ids->next_id is passed to:
idr_alloc(&ids->ipcs_idr, new, ipcid_to_idx(next_id), 0, ...)
2. The zero upper bound makes the allocation effectively open-ended.
Once the valid SysV IPC tail is occupied, idr_alloc() can spill past
ipc_mni and allocate an entry beyond the valid IPC id range.
3. The new object id is still encoded with the narrower SysV IPC index
width:
new->id = (new->seq << ipcmni_seq_shift()) + idx
4. Later removal goes through ipc_rmid(), which uses:
ipcid_to_idx(ipcp->id)
That truncates the real IDR index. An object actually stored at a
high index can then be removed as if it lived at a low in-range
index.
5. For shared memory, shm_destroy() frees the current object anyway, but
the real high IDR slot is left behind as a dangling pointer.
6. A subsequent walk of /proc/sysvipc/shm reaches the stale IDR entry
and dereferences freed memory.
Prevent this by bounding the requested allocation to ipc_mni so the
checkpoint/restore path fails once the valid range is exhausted. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_policy: fix strict mode inbound policy matching
match_policy_in() walks sec_path entries from the last transform to the
first one, but strict policy matching needs to consume info->pol[] in
the same forward order as the rule layout.
Derive the strict-match policy position from the number of transforms
already consumed so that multi-element inbound rules are matched
consistently. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: serialize accept_q access
bt_sock_poll() walks the accept queue without synchronization, while
child teardown can unlink the same socket and drop its last reference.
The unsynchronized accept queue walk has existed since the initial
Bluetooth import.
Protect accept_q with a dedicated lock for queue updates and polling.
Also rework bt_accept_dequeue() to take temporary child references under
the queue lock before dropping it and locking the child socket. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ip6t_hbh: reject oversized option lists
struct ip6t_opts stores at most IP6T_OPTS_OPTSNR option descriptors,
but hbh_mt6_check() does not reject larger optsnr values supplied from
userspace.
Validate optsnr in the rule setup path so only match data that fits the
fixed-size opts array can be installed. This follows the existing xtables
pattern of rejecting invalid user-provided counts in checkentry() and
keeps the packet matching path unchanged.
`struct ip6t_opts` has a fixed `opts[IP6T_OPTS_OPTSNR]` array,
where `IP6T_OPTS_OPTSNR` is 16, then off-by-one array access is possible:
[ 137.924693][ T8692] UBSAN: array-index-out-of-bounds in ../net/ipv6/netfilter/ip6t_hbh.c:110:29
[ 137.926167][ T8692] index 16 is out of range for type '__u16 [16]' |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: fix fragment reassembly length accounting
batman-adv keeps a running payload length for queued fragments and uses it
to validate a fragment chain before reassembly.
That accounting currently allows the accumulated fragment length to be
truncated during updates. As a result, malformed fragment chains can
bypass the intended validation and drive reassembly with inconsistent
length state, leading to a local denial of service.
Fix the accounting by storing the accumulated length in a length-typed
field and rejecting update overflows before the existing validation logic
runs.
The fix was verified against the original reproducer and against valid
fragment reassembly paths. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Free reuseport cBPF prog after RCU grace period.
Eulgyu Kim reported the splat below with a repro. [0]
The repro sets up a UDP reuseport group with a cBPF prog and
replaces it with a new one while another thread is sending
a UDP packet to the group.
The reuseport prog is freed by sk_reuseport_prog_free().
bpf_prog_put() is called for "e"BPF prog to destruct through
multiple stages while cBPF prog is freed immediately by
bpf_release_orig_filter() and bpf_prog_free().
If a reuseport prog is detached from the setsockopt() path
(reuseport_attach_prog() or reuseport_detach_prog()),
sk_reuseport_prog_free() is called without waiting for RCU
readers to complete, resulting in various bugs.
Let's defer freeing the reuseport cBPF prog after one RCU
grace period.
Note "e"BPF prog is safe as is unless the fast path starts
to touch fields destroyed in bpf_prog_put_deferred() and
__bpf_prog_put_noref().
[0]:
BUG: KASAN: vmalloc-out-of-bounds in reuseport_select_sock+0xedc/0x1220 net/core/sock_reuseport.c:596
Read of size 4 at addr ffffc9000051e004 by task slowme/10208
CPU: 6 UID: 1000 PID: 10208 Comm: slowme Not tainted 7.0.0-geb7ac95ff75e #32 PREEMPT(full)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xca/0x240 mm/kasan/report.c:482
kasan_report+0x118/0x150 mm/kasan/report.c:595
reuseport_select_sock+0xedc/0x1220 net/core/sock_reuseport.c:596
udp4_lib_lookup2+0x3bc/0x950 net/ipv4/udp.c:495
__udp4_lib_lookup+0x768/0xe20 net/ipv4/udp.c:723
__udp4_lib_lookup_skb+0x297/0x390 net/ipv4/udp.c:752
__udp4_lib_rcv+0x1312/0x2620 net/ipv4/udp.c:2752
ip_protocol_deliver_rcu+0x282/0x440 net/ipv4/ip_input.c:207
ip_local_deliver_finish+0x3bb/0x6f0 net/ipv4/ip_input.c:241
NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318
NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318
__netif_receive_skb_one_core net/core/dev.c:6181 [inline]
__netif_receive_skb net/core/dev.c:6294 [inline]
process_backlog+0xaa4/0x1960 net/core/dev.c:6645
__napi_poll+0xae/0x340 net/core/dev.c:7709
napi_poll net/core/dev.c:7772 [inline]
net_rx_action+0x5d7/0xf50 net/core/dev.c:7929
handle_softirqs+0x22b/0x870 kernel/softirq.c:622
do_softirq+0x76/0xd0 kernel/softirq.c:523
</IRQ>
<TASK>
__local_bh_enable_ip+0xf8/0x130 kernel/softirq.c:450
local_bh_enable include/linux/bottom_half.h:33 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:924 [inline]
__dev_queue_xmit+0x1dd7/0x3710 net/core/dev.c:4890
neigh_output include/net/neighbour.h:556 [inline]
ip_finish_output2+0xca9/0x1070 net/ipv4/ip_output.c:237
NF_HOOK_COND include/linux/netfilter.h:307 [inline]
ip_output+0x29f/0x450 net/ipv4/ip_output.c:438
ip_send_skb+0x45/0xc0 net/ipv4/ip_output.c:1508
udp_send_skb+0xb04/0x1510 net/ipv4/udp.c:1195
udp_sendmsg+0x1a71/0x2350 net/ipv4/udp.c:1485
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
__sys_sendto+0x554/0x680 net/socket.c:2206
__do_sys_sendto net/socket.c:2213 [inline]
__se_sys_sendto net/socket.c:2209 [inline]
__x64_sys_sendto+0xde/0x100 net/socket.c:2209
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x160/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x415a2d
Code: b3 66 2e 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f6bc31e41e8 EFLAGS: 00000212 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007f6bc31e4cdc RCX: 0000000000415a2d
RDX: 0000000000000001 RSI: 00007f6bc31e421f RDI: 0000000000000003
RBP: 00007f6bc31e4240 R08: 00007f6bc31e4220 R09: 0000000000000010
R10: 0000000000000000 R11:
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA: During rereg_mr ensure that REREG_ACCESS is compatible
If IB_MR_REREG_ACCESS changes from RO to RW then the umem has to be
re-evaluated to ensure it is properly pinned as RW. Since the umem is
hidden inside each driver's mr struct add a ib_umem_check_rereg() function
that each driver has to call before processing IB_MR_REREG_ACCESS.
mlx4 has to retain its duplicate ib_access_writable check because it
implements IB_MR_REREG_ACCESS | IB_MR_REREG_TRANS by changing both items
in place sequentially while the MR is live, so it will continue to not
support this combination. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: fix unlocked test for dm_suspended_md
The function dm_blk_report_zones tests if the device is suspended with
the "dm_suspended_md" call. However, this function is called without
holding any locks, so the device may be suspended just after it.
Move the call to dm_suspended_md after dm_get_live_table, so that the
device can't be suspended after the suspended state was tested. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix iova-to-va conversion for MR page sizes != PAGE_SIZE
The current implementation incorrectly handles memory regions (MRs) with
page sizes different from the system PAGE_SIZE. The core issue is that
rxe_set_page() is called with mr->page_size step increments, but the
page_list stores individual struct page pointers, each representing
PAGE_SIZE of memory.
ib_sg_to_page() has ensured that when i>=1 either
a) SG[i-1].dma_end and SG[i].dma_addr are contiguous
or
b) SG[i-1].dma_end and SG[i].dma_addr are mr->page_size aligned.
This leads to incorrect iova-to-va conversion in scenarios:
1) page_size < PAGE_SIZE (e.g., MR: 4K, system: 64K):
ibmr->iova = 0x181800
sg[0]: dma_addr=0x181800, len=0x800
sg[1]: dma_addr=0x173000, len=0x1000
Access iova = 0x181800 + 0x810 = 0x182010
Expected VA: 0x173010 (second SG, offset 0x10)
Before fix:
- index = (0x182010 >> 12) - (0x181800 >> 12) = 1
- page_offset = 0x182010 & 0xFFF = 0x10
- xarray[1] stores system page base 0x170000
- Resulting VA: 0x170000 + 0x10 = 0x170010 (wrong)
2) page_size > PAGE_SIZE (e.g., MR: 64K, system: 4K):
ibmr->iova = 0x18f800
sg[0]: dma_addr=0x18f800, len=0x800
sg[1]: dma_addr=0x170000, len=0x1000
Access iova = 0x18f800 + 0x810 = 0x190010
Expected VA: 0x170010 (second SG, offset 0x10)
Before fix:
- index = (0x190010 >> 16) - (0x18f800 >> 16) = 1
- page_offset = 0x190010 & 0xFFFF = 0x10
- xarray[1] stores system page for dma_addr 0x170000
- Resulting VA: system page of 0x170000 + 0x10 = 0x170010 (wrong)
Yi Zhang reported a kernel panic[1] years ago related to this defect.
Solution:
1. Replace xarray with pre-allocated rxe_mr_page array for sequential
indexing (all MR page indices are contiguous)
2. Each rxe_mr_page stores both struct page* and offset within the
system page
3. Handle MR page_size != PAGE_SIZE relationships:
- page_size > PAGE_SIZE: Split MR pages into multiple system pages
- page_size <= PAGE_SIZE: Store offset within system page
4. Add boundary checks and compatibility validation
This ensures correct iova-to-va conversion regardless of MR page size
and system PAGE_SIZE relationship, while improving performance through
array-based sequential access.
Tests on 4K and 64K PAGE_SIZE hosts:
- rdma-core/pytests
$ ./build/bin/run_tests.py --dev eth0_rxe
- blktest:
$ TIMEOUT=30 QUICK_RUN=1 USE_RXE=1 NVMET_TRTYPES=rdma ./check nvme srp rnbd
[1] https://lore.kernel.org/all/CAHj4cs9XRqE25jyVw9rj9YugffLn5+f=1znaBEnu1usLOciD+g@mail.gmail.com/T/ |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: use list_del_rcu for netlink hooks
nft_netdev_unregister_hooks and __nft_unregister_flowtable_net_hooks need
to use list_del_rcu(), this list can be walked by concurrent dumpers.
Add a new helper and use it consistently. |
