| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix OOB read in smb2_ioctl_query_info QUERY_INFO path
smb2_ioctl_query_info() has two response-copy branches: PASSTHRU_FSCTL
and the default QUERY_INFO path. The QUERY_INFO branch clamps
qi.input_buffer_length to the server-reported OutputBufferLength and then
copies qi.input_buffer_length bytes from qi_rsp->Buffer to userspace, but
it never verifies that the flexible-array payload actually fits within
rsp_iov[1].iov_len.
A malicious server can return OutputBufferLength larger than the actual
QUERY_INFO response, causing copy_to_user() to walk past the response
buffer and expose adjacent kernel heap to userspace.
Guard the QUERY_INFO copy with a bounds check on the actual Buffer
payload. Use struct_size(qi_rsp, Buffer, qi.input_buffer_length)
rather than an open-coded addition so the guard cannot overflow on
32-bit builds. |
| In the Linux kernel, the following vulnerability has been resolved:
net/packet: fix TOCTOU race on mmap'd vnet_hdr in tpacket_snd()
In tpacket_snd(), when PACKET_VNET_HDR is enabled, vnet_hdr points
directly into the mmap'd TX ring buffer shared with userspace. The
kernel validates the header via __packet_snd_vnet_parse() but then
re-reads all fields later in virtio_net_hdr_to_skb(). A concurrent
userspace thread can modify the vnet_hdr fields between validation
and use, bypassing all safety checks.
The non-TPACKET path (packet_snd()) already correctly copies vnet_hdr
to a stack-local variable. All other vnet_hdr consumers in the kernel
(tun.c, tap.c, virtio_net.c) also use stack copies. The TPACKET TX
path is the only caller of virtio_net_hdr_to_skb() that reads directly
from user-controlled shared memory.
Fix this by copying vnet_hdr from the mmap'd ring buffer to a
stack-local variable before validation and use, consistent with the
approach used in packet_snd() and all other callers. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp: Don't attempt to copy CSR to userspace if PSP command failed
When retrieving the PEK CSR, don't attempt to copy the blob to userspace
if the firmware command failed. If the failure was due to an invalid
length, i.e. the userspace buffer+length was too small, copying the number
of bytes _firmware_ requires will overflow the kernel-allocated buffer and
leak data to userspace.
BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
Read of size 2084 at addr ffff898144612e20 by task syz.9.219/21405
CPU: 14 UID: 0 PID: 21405 Comm: syz.9.219 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025
Call Trace:
<TASK>
dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120
print_address_description ../mm/kasan/report.c:378 [inline]
print_report+0xbc/0x260 ../mm/kasan/report.c:482
kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595
check_region_inline ../mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200
instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
_inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
_copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
copy_to_user ../include/linux/uaccess.h:236 [inline]
sev_ioctl_do_pek_csr+0x31f/0x590 ../drivers/crypto/ccp/sev-dev.c:1872
sev_ioctl+0x3a4/0x490 ../drivers/crypto/ccp/sev-dev.c:2562
vfs_ioctl ../fs/ioctl.c:51 [inline]
__do_sys_ioctl ../fs/ioctl.c:597 [inline]
__se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583
do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
WARN if the driver says the command succeeded, but the firmware error code
says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any
firwmware error. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp: Don't attempt to copy PDH cert to userspace if PSP command failed
When retrieving the PDH cert, don't attempt to copy the blobs to userspace
if the firmware command failed. If the failure was due to an invalid
length, i.e. the userspace buffer+length was too small, copying the number
of bytes _firmware_ requires will overflow the kernel-allocated buffer and
leak data to userspace.
BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
Read of size 2084 at addr ffff8885c4ab8aa0 by task syz.0.186/21033
CPU: 51 UID: 0 PID: 21033 Comm: syz.0.186 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.84.12-0 11/17/2025
Call Trace:
<TASK>
dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120
print_address_description ../mm/kasan/report.c:378 [inline]
print_report+0xbc/0x260 ../mm/kasan/report.c:482
kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595
check_region_inline ../mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200
instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
_inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
_copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
copy_to_user ../include/linux/uaccess.h:236 [inline]
sev_ioctl_do_pdh_export+0x3d3/0x7c0 ../drivers/crypto/ccp/sev-dev.c:2347
sev_ioctl+0x2a2/0x490 ../drivers/crypto/ccp/sev-dev.c:2568
vfs_ioctl ../fs/ioctl.c:51 [inline]
__do_sys_ioctl ../fs/ioctl.c:597 [inline]
__se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583
do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
WARN if the driver says the command succeeded, but the firmware error code
says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any
firwmware error. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp: Don't attempt to copy ID to userspace if PSP command failed
When retrieving the ID for the CPU, don't attempt to copy the ID blob to
userspace if the firmware command failed. If the failure was due to an
invalid length, i.e. the userspace buffer+length was too small, copying
the number of bytes _firmware_ requires will overflow the kernel-allocated
buffer and leak data to userspace.
BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
Read of size 64 at addr ffff8881867f5960 by task syz.0.906/24388
CPU: 130 UID: 0 PID: 24388 Comm: syz.0.906 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025
Call Trace:
<TASK>
dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120
print_address_description ../mm/kasan/report.c:378 [inline]
print_report+0xbc/0x260 ../mm/kasan/report.c:482
kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595
check_region_inline ../mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200
instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
_inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
_copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
copy_to_user ../include/linux/uaccess.h:236 [inline]
sev_ioctl_do_get_id2+0x361/0x490 ../drivers/crypto/ccp/sev-dev.c:2222
sev_ioctl+0x25f/0x490 ../drivers/crypto/ccp/sev-dev.c:2575
vfs_ioctl ../fs/ioctl.c:51 [inline]
__do_sys_ioctl ../fs/ioctl.c:597 [inline]
__se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583
do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
WARN if the driver says the command succeeded, but the firmware error code
says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any
firwmware error. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: some missing initializations on replay
In several places in the code, we have a label to signify
the start of the code where a request can be replayed if
necessary. However, some of these places were missing the
necessary reinitializations of certain local variables
before replay.
This change makes sure that these variables get initialized
after the label. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ip6t_eui64: reject invalid MAC header for all packets
`eui64_mt6()` derives a modified EUI-64 from the Ethernet source address
and compares it with the low 64 bits of the IPv6 source address.
The existing guard only rejects an invalid MAC header when
`par->fragoff != 0`. For packets with `par->fragoff == 0`, `eui64_mt6()`
can still reach `eth_hdr(skb)` even when the MAC header is not valid.
Fix this by removing the `par->fragoff != 0` condition so that packets
with an invalid MAC header are rejected before accessing `eth_hdr(skb)`. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: br_nd_send: linearize skb before parsing ND options
br_nd_send() parses neighbour discovery options from ns->opt[] and
assumes that these options are in the linear part of request.
Its callers only guarantee that the ICMPv6 header and target address
are available, so the option area can still be non-linear. Parsing
ns->opt[] in that case can access data past the linear buffer.
Linearize request before option parsing and derive ns from the linear
network header. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: flowlabel: defer exclusive option free until RCU teardown
`ip6fl_seq_show()` walks the global flowlabel hash under the seq-file
RCU read-side lock and prints `fl->opt->opt_nflen` when an option block
is present.
Exclusive flowlabels currently free `fl->opt` as soon as `fl->users`
drops to zero in `fl_release()`. However, the surrounding
`struct ip6_flowlabel` remains visible in the global hash table until
later garbage collection removes it and `fl_free_rcu()` finally tears it
down.
A concurrent `/proc/net/ip6_flowlabel` reader can therefore race that
early `kfree()` and dereference freed option state, triggering a crash
in `ip6fl_seq_show()`.
Fix this by keeping `fl->opt` alive until `fl_free_rcu()`. That matches
the lifetime already required for the enclosing flowlabel while readers
can still reach it under RCU. |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: validate MPLS set/set_masked payload length
validate_set() accepted OVS_KEY_ATTR_MPLS as variable-sized payload for
SET/SET_MASKED actions. In action handling, OVS expects fixed-size
MPLS key data (struct ovs_key_mpls).
Use the already normalized key_len (masked case included) and reject
non-matching MPLS action key sizes.
Reject invalid MPLS action payload lengths early. |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: defer tunnel netdev_put to RCU release
ovs_netdev_tunnel_destroy() may run after NETDEV_UNREGISTER already
detached the device. Dropping the netdev reference in destroy can race
with concurrent readers that still observe vport->dev.
Do not release vport->dev in ovs_netdev_tunnel_destroy(). Instead, let
vport_netdev_free() drop the reference from the RCU callback, matching
the non-tunnel destroy path and avoiding additional synchronization
under RTNL. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: only handle RESPONSE during service challenge
Only process RESPONSE packets while the service connection is still in
RXRPC_CONN_SERVICE_CHALLENGING. Check that state under state_lock before
running response verification and security initialization, then use a local
secured flag to decide whether to queue the secured-connection work after
the state transition. This keeps duplicate or late RESPONSE packets from
re-running the setup path and removes the unlocked post-transition state
test. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_netem: fix out-of-bounds access in packet corruption
In netem_enqueue(), the packet corruption logic uses
get_random_u32_below(skb_headlen(skb)) to select an index for
modifying skb->data. When an AF_PACKET TX_RING sends fully non-linear
packets over an IPIP tunnel, skb_headlen(skb) evaluates to 0.
Passing 0 to get_random_u32_below() takes the variable-ceil slow path
which returns an unconstrained 32-bit random integer. Using this
unconstrained value as an offset into skb->data results in an
out-of-bounds memory access.
Fix this by verifying skb_headlen(skb) is non-zero before attempting
to corrupt the linear data area. Fully non-linear packets will silently
bypass the corruption logic. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ip6t_rt: reject oversized addrnr in rt_mt6_check()
Reject rt match rules whose addrnr exceeds IP6T_RT_HOPS.
rt_mt6() expects addrnr to stay within the bounds of rtinfo->addrs[].
Validate addrnr during rule installation so malformed rules are rejected
before the match logic can use an out-of-range value. |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: read UNIX_DIAG_VFS data under unix_state_lock
Exact UNIX diag lookups hold a reference to the socket, but not to
u->path. Meanwhile, unix_release_sock() clears u->path under
unix_state_lock() and drops the path reference after unlocking.
Read the inode and device numbers for UNIX_DIAG_VFS while holding
unix_state_lock(), then emit the netlink attribute after dropping the
lock.
This keeps the VFS data stable while the reply is being built. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix slab-use-after-free in __inet_lookup_established
The ehash table lookups are lockless and rely on
SLAB_TYPESAFE_BY_RCU to guarantee socket memory stability
during RCU read-side critical sections. Both tcp_prot and
tcpv6_prot have their slab caches created with this flag
via proto_register().
However, MPTCP's mptcp_subflow_init() copies tcpv6_prot into
tcpv6_prot_override during inet_init() (fs_initcall, level 5),
before inet6_init() (module_init/device_initcall, level 6) has
called proto_register(&tcpv6_prot). At that point,
tcpv6_prot.slab is still NULL, so tcpv6_prot_override.slab
remains NULL permanently.
This causes MPTCP v6 subflow child sockets to be allocated via
kmalloc (falling into kmalloc-4k) instead of the TCPv6 slab
cache. The kmalloc-4k cache lacks SLAB_TYPESAFE_BY_RCU, so
when these sockets are freed without SOCK_RCU_FREE (which is
cleared for child sockets by design), the memory can be
immediately reused. Concurrent ehash lookups under
rcu_read_lock can then access freed memory, triggering a
slab-use-after-free in __inet_lookup_established.
Fix this by splitting the IPv6-specific initialization out of
mptcp_subflow_init() into a new mptcp_subflow_v6_init(), called
from mptcp_proto_v6_init() before protocol registration. This
ensures tcpv6_prot_override.slab correctly inherits the
SLAB_TYPESAFE_BY_RCU slab cache. |
| In the Linux kernel, the following vulnerability has been resolved:
seg6: separate dst_cache for input and output paths in seg6 lwtunnel
The seg6 lwtunnel uses a single dst_cache per encap route, shared
between seg6_input_core() and seg6_output_core(). These two paths
can perform the post-encap SID lookup in different routing contexts
(e.g., ip rules matching on the ingress interface, or VRF table
separation). Whichever path runs first populates the cache, and the
other reuses it blindly, bypassing its own lookup.
Fix this by splitting the cache into cache_input and cache_output,
so each path maintains its own cached dst independently. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: uinput - fix circular locking dependency with ff-core
A lockdep circular locking dependency warning can be triggered
reproducibly when using a force-feedback gamepad with uinput (for
example, playing ELDEN RING under Wine with a Flydigi Vader 5
controller):
ff->mutex -> udev->mutex -> input_mutex -> dev->mutex -> ff->mutex
The cycle is caused by four lock acquisition paths:
1. ff upload: input_ff_upload() holds ff->mutex and calls
uinput_dev_upload_effect() -> uinput_request_submit() ->
uinput_request_send(), which acquires udev->mutex.
2. device create: uinput_ioctl_handler() holds udev->mutex and calls
uinput_create_device() -> input_register_device(), which acquires
input_mutex.
3. device register: input_register_device() holds input_mutex and
calls kbd_connect() -> input_register_handle(), which acquires
dev->mutex.
4. evdev release: evdev_release() calls input_flush_device() under
dev->mutex, which calls input_ff_flush() acquiring ff->mutex.
Fix this by introducing a new state_lock spinlock to protect
udev->state and udev->dev access in uinput_request_send() instead of
acquiring udev->mutex. The function only needs to atomically check
device state and queue an input event into the ring buffer via
uinput_dev_event() -- both operations are safe under a spinlock
(ktime_get_ts64() and wake_up_interruptible() do not sleep). This
breaks the ff->mutex -> udev->mutex link since a spinlock is a leaf in
the lock ordering and cannot form cycles with mutexes.
To keep state transitions visible to uinput_request_send(), protect
writes to udev->state in uinput_create_device() and
uinput_destroy_device() with the same state_lock spinlock.
Additionally, move init_completion(&request->done) from
uinput_request_send() to uinput_request_submit() before
uinput_request_reserve_slot(). Once the slot is allocated,
uinput_flush_requests() may call complete() on it at any time from
the destroy path, so the completion must be initialised before the
request becomes visible.
Lock ordering after the fix:
ff->mutex -> state_lock (spinlock, leaf)
udev->mutex -> state_lock (spinlock, leaf)
udev->mutex -> input_mutex -> dev->mutex -> ff->mutex (no back-edge) |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix incorrect return value after changing leaf in lookup_extent_data_ref()
After commit 1618aa3c2e01 ("btrfs: simplify return variables in
lookup_extent_data_ref()"), the err and ret variables were merged into
a single ret variable. However, when btrfs_next_leaf() returns 0
(success), ret is overwritten from -ENOENT to 0. If the first key in
the next leaf does not match (different objectid or type), the function
returns 0 instead of -ENOENT, making the caller believe the lookup
succeeded when it did not. This can lead to operations on the wrong
extent tree item, potentially causing extent tree corruption.
Fix this by returning -ENOENT directly when the key does not match,
instead of relying on the ret variable. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: fix use-after-free in timeout object destroy
nft_ct_timeout_obj_destroy() frees the timeout object with kfree()
immediately after nf_ct_untimeout(), without waiting for an RCU grace
period. Concurrent packet processing on other CPUs may still hold
RCU-protected references to the timeout object obtained via
rcu_dereference() in nf_ct_timeout_data().
Add an rcu_head to struct nf_ct_timeout and use kfree_rcu() to defer
freeing until after an RCU grace period, matching the approach already
used in nfnetlink_cttimeout.c.
KASAN report:
BUG: KASAN: slab-use-after-free in nf_conntrack_tcp_packet+0x1381/0x29d0
Read of size 4 at addr ffff8881035fe19c by task exploit/80
Call Trace:
nf_conntrack_tcp_packet+0x1381/0x29d0
nf_conntrack_in+0x612/0x8b0
nf_hook_slow+0x70/0x100
__ip_local_out+0x1b2/0x210
tcp_sendmsg_locked+0x722/0x1580
__sys_sendto+0x2d8/0x320
Allocated by task 75:
nft_ct_timeout_obj_init+0xf6/0x290
nft_obj_init+0x107/0x1b0
nf_tables_newobj+0x680/0x9c0
nfnetlink_rcv_batch+0xc29/0xe00
Freed by task 26:
nft_obj_destroy+0x3f/0xa0
nf_tables_trans_destroy_work+0x51c/0x5c0
process_one_work+0x2c4/0x5a0 |
