| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: fix race of kfree vs kref_get_unless_zero
hci_conn::iso_data is accessed and modified without lock or RCU.
This leads to a race
[Task hdev->workqueue] [Task 2]
iso_recv iso_conn_put(conn)
conn = LOAD hcon->iso_data iso_conn_free(conn)
iso_conn_hold_unless_zero(conn) hcon->iso_data = NULL
kfree(conn)
kref_get_unless_zero(&conn->ref) /* UAF */
and also to races in iso_conn_add() vs. iso_conn_free().
Fix by adding spinlock hci_conn::proto_lock and using it to guard
hci_conn::iso_data. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Block VFs from clobbering special CGX PKIND state
PF and VF NIX LFs that share a CGX LMAC reuse the same hardware PKIND
programming. When HiGig2 or EDSA parsing is enabled, a VF NIX LF alloc must
not reset the LMAC RX PKIND or default TX parse config over the PF setup.
Add cgx_get_pkind() and rvu_cgx_is_pkind_config_permitted() so VFs skip
cgx_set_pkind(), rvu_npc_set_pkind(), and NIX_AF_LFX_TX_PARSE_CFG updates
when the LMAC is using NPC_RX_HIGIG_PKIND or NPC_RX_EDSA_PKIND. |
| In the Linux kernel, the following vulnerability has been resolved:
qede: sync udp_tunnel ports outside qede_lock in the recovery path
A TX timeout on a qede NIC that has VXLAN/GENEVE tunnel ports
configured wedges the rtnetlink control plane of the whole machine:
NETDEV WATCHDOG: ens6f1 (qede): transmit queue 2 timed out 10226 ms
[qede_tx_timeout:586(ens6f1)]TX timeout on queue 2!
[qede_recovery_handler:2665(ens6f0)]Starting a recovery process
The recovery path deadlocks on the driver's own mutex:
qede_sp_task
rtnl_lock()
mutex_lock(&edev->qede_lock) <- taken
qede_recovery_handler
qede_load
udp_tunnel_nic_reset_ntf
__udp_tunnel_nic_device_sync
info->sync_table == qede_udp_tunnel_sync
mutex_lock(&edev->qede_lock) <- same task: deadlock
The mutex is not recursive, so the kworker blocks on itself with
rtnl_lock held, and neither lock is ever released. Every task that
calls rtnl_lock() afterwards (ip, ovs-vswitchd, lldpad, IPv6
addrconf, sshd) blocks forever while the node still answers ping.
In a vmcore from an affected production node rtnl_mutex.owner
decodes to the very kworker blocked at the innermost mutex_lock()
above.
Re-sync the tunnel ports from qede_sp_task() after the internal lock
is dropped, still under rtnl_lock as the udp_tunnel API requires.
This mirrors qede_open(), which calls udp_tunnel_nic_reset_ntf()
under rtnl without the internal lock.
qede_recovery_handler() now returns whether it has successfully
reloaded an open device, and the caller re-syncs the ports only in
that case. This keeps the old gating exactly: a device that was down
or a failed recovery returns false, as those paths never reached the
udp_tunnel_nic_reset_ntf() call before either.
This was the only user of the qede_lock()/qede_unlock() helpers, so
remove them. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: devicetree: don't free uninitialized dev_name on error path
dt_remember_or_free_map() duplicates dev_name for each map entry. If
kstrdup_const() fails, dt_free_map() frees dev_name in all num_maps
entries, including entries that have not been initialized.
Some pinctrl drivers, including pinctrl-imx, allocate the map with
kmalloc() and leave dev_name for the core to initialize. The untouched
entries therefore contain uninitialized data which is passed to
kfree_const().
Reproduced on qemu's mcimx6ul-evk (pinctrl-imx) with failslab injection
while binding the pinctrl-consuming device, under KASAN:
BUG: KASAN: double-free in dt_free_map+0x34/0xa4
Free of addr c425a900 by task init/1
kfree from dt_free_map+0x34/0xa4
dt_free_map from dt_remember_or_free_map+0x184/0x198
dt_remember_or_free_map from pinctrl_dt_to_map+0x33c/0x4c8
pinctrl_dt_to_map from create_pinctrl+0x9c/0x5c0
Initialize all dev_name fields to NULL before duplicating the device
name, making the full-map cleanup safe after a partial failure. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Cancel delayed I/O APIC EOI handling before destroying vCPUs
Cancel (and flush) the I/O APIC's delayed EOI handling work during the
"pre VM destroy" phase, before vCPUs are destroyed, as processing the EOI
broadcast will inject another IRQ if the line is asserted, i.e. will try
to deliver an IRQ to the target vCPU(s). Canceling the work after vCPUs
are destroyed leads to UAF if the delayed work is processed after vCPUs are
destroyed.
BUG: KASAN: slab-use-after-free in __kvm_irq_delivery_to_apic_fast+0x9bf/0xa20 arch/x86/kvm/lapic.c:1250
Read of size 8 at addr ffff8880499abea0 by task kworker/1:2/1218
CPU: 1 UID: 0 PID: 1218 Comm: kworker/1:2 Not tainted 7.1.0-rc7 #5 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: events kvm_ioapic_eoi_inject_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94
dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378
print_report+0x139/0x4ad mm/kasan/report.c:482
kasan_report+0xe4/0x1d0 mm/kasan/report.c:595
__kvm_irq_delivery_to_apic_fast+0x9bf/0xa20 arch/x86/kvm/lapic.c:1250
__kvm_irq_delivery_to_apic+0xd8/0xbf0 arch/x86/kvm/lapic.c:1345
kvm_irq_delivery_to_apic arch/x86/kvm/lapic.h:129
ioapic_service+0x308/0x590 arch/x86/kvm/ioapic.c:492
kvm_ioapic_eoi_inject_work+0x13c/0x190 arch/x86/kvm/ioapic.c:532
process_one_work+0xa59/0x19a0 kernel/workqueue.c:3314
process_scheduled_works kernel/workqueue.c:3397
worker_thread+0x5eb/0xe50 kernel/workqueue.c:3478
kthread+0x370/0x450 kernel/kthread.c:436
ret_from_fork+0x72b/0xd30 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Note, the VM is unreachable once kvm_destroy_vm() starts, and scheduling
new work via kvm_ioapic_send_eoi() can only be done via KVM_RUN, i.e.
requires a live vCPU.
Alternatively, KVM could simply destroy the I/O APIC during the "pre" phase
of VM destruction, but that gets more than a bit sketchy as KVM expects the
I/O APIC to exist if ioapic_in_kernel() is true, and nested virtualization
in particular has a bad habit of touching VM-scope state during vCPU
destruction. E.g. attempting to free the PIC during the pre phase would
lead to a NULL pointer dereference in kvm_cpu_has_extint(), and it's not
hard to imagine the I/O APIC having a similar flaw. |
| In the Linux kernel, the following vulnerability has been resolved:
audit: fix potential use-after-free in audit_del_rule()
`audit_del_rule()` destroys `e->rule.exe` via `audit_remove_mark_rule()`
before unlinking the rule from RCU-visible filter lists and waiting for a
grace period. Concurrent readers in `audit_filter()` and
`audit_filter_rules()` still dereference `e->rule.exe`, while the fsnotify
mark can be freed on an independent lifetime path. This creates a
use-after-free window during rule deletion.
Fix this by unlinking the rule from the RCU-visible lists and invoking
`synchronize_rcu()` before calling `audit_remove_mark_rule()` (and other
rule removal helpers). This ensures that all existing RCU readers have
exited the critical section before any underlying resources are destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: mgmt: fix UAF in pair command cancellation
The pairing completion and authentication failure callbacks look up the
pending MGMT_OP_PAIR_DEVICE command by walking hdev->mgmt_pending. The
lookup returned a command that was still linked on the shared pending list,
without keeping mgmt_pending_lock held for the later dereference and
removal.
A concurrent MGMT_OP_CANCEL_PAIR_DEVICE request can remove and free the
same pending command before the callback uses it. The reverse race is also
possible when cancel_pair_device() gets a command from pending_find() and a
callback removes it before the cancel path dereferences it. This can lead
to a use-after-free and a second list_del().
Make the pairing lookup helpers transfer ownership of the pending command
by removing it from hdev->mgmt_pending while holding mgmt_pending_lock.
The callbacks and cancel path then complete the command and free it
directly, so racing paths cannot find or free the same command again. Take
a temporary hci_conn reference in cancel_pair_device() because the command
completion drops the reference stored in the pending command. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: HIDP: validate numbered report payloads
When hidp_get_raw_report() waits for a numbered report,
hidp_process_data() compares the expected report number with skb->data[0].
A connected HIDP peer can reply with only a DATA transaction header,
leaving the skb empty after the header is removed.
KMSAN reports an uninitialized-value use in hidp_session_run(), with the
value originating in __alloc_skb() through vhci_write(). The transaction
header checks remove the empty-frame reports, but this report remains until
the payload check is added.
The comparison can also consume a peer-controlled byte beyond the declared
L2CAP PDU. A DATA | FEATURE response followed by an extra 0x01 byte made
the current code accept that byte as report ID 1 and complete
HIDIOCGFEATURE with a zero-byte result. With this change the malformed
response is rejected with -EIO, while a subsequent valid response still
succeeds.
Require a payload byte before comparing a numbered report ID. Unnumbered
reports continue to accept an empty payload. |
| In the Linux kernel, the following vulnerability has been resolved:
fou: Fix use-after-free in fou_create()
fou_create() publishes struct fou through sk_user_data before adding the
new FOU port to the per-netns list. If fou_add_to_port_list() fails,
the error path frees fou while it is still reachable through
sk_user_data. A concurrent receive can then dereference the freed
object in fou_from_sock().
This ordering issue was previously noted in the linked discussion.
The failure is reachable when local port 0 is requested. Each socket
binds to a different ephemeral port, but fou_cfg_cmp() compares the
requested port 0 and reports -EALREADY once an entry already exists.
Release the tunnel socket before freeing fou so sk_user_data is cleared
first, and defer reclamation with kfree_rcu() to protect concurrent RCU
readers. This matches the lifetime handling in fou_release(). |
| In the Linux kernel, the following vulnerability has been resolved:
igbvf: Fix leak in TX DMA error cleanup
If an error is encountered while mapping TX buffers, the driver should
unmap any buffers already mapped for that skb.
Because count is incremented before each frag mapping, it will always
match the correct number of unmappings needed when dma_error is reached.
Decrementing count before the while loop in dma_error causes an
off-by-one error. If any mapping was successful before an unsuccessful
mapping, exactly one DMA mapping (the head) would leak.
This bug was introduced by a 2010 fix for an endless loop in dma_error.
All other affected drivers have already been fixed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix socket use-after-free during link group termination
__smc_lgr_terminate() drops conns_lock after finding a connection in
lgr->conns_all, but before taking a reference on its socket. The connection
is embedded in the socket, and its registration reference protects it only
while the connection remains in the tree.
A concurrent close can unregister the connection and drop that reference,
freeing the socket before the termination worker reaches sock_hold().
The race is reachable when close overlaps link group termination.
Local stress testing reproduced the use-after-free and KASAN reported:
BUG: KASAN: slab-use-after-free in __smc_lgr_terminate.part.0 [smc]
Write of size 4 by task kworker/3:3
Workqueue: events smc_lgr_terminate_work [smc]
__smc_lgr_terminate.part.0 [smc]
The socket was allocated by smc_create(), freed through
slab_free_after_rcu_debug(), and was followed by:
refcount_t: addition on 0; use-after-free.
__smc_lgr_terminate.part.0 [smc]
Take the socket reference while conns_lock still protects the tree entry.
The unregister path then cannot drop the last reference until termination
has finished using the socket. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: do not update comments from kernel-side hash adds
mtype_resize() copies comment pointers with memcpy(), not the comment
objects themselves. During the window after an entry has been copied but
before the table swap and backlog replay, the old table is still
published for packet-side updates while the replacement-table entry
already holds the same ip_set_comment_rcu pointer.
If xt_SET --add-set ... --exist hits that old entry in this window,
mtype_add() calls ip_set_init_comment() even though packet-side adds
carry no comment payload. That call frees the shared comment through the
old entry, so the replacement-table entry now holds a stale pointer.
When the queued add is replayed on the new table, mtype_add() calls
ip_set_init_comment() again and strlen() dereferences the stale pointer.
Fix this in mtype_add() by skipping ip_set_init_comment() when
ext->target marks a packet-side add. Userspace adds still update
comments, while packet-side adds can no longer free comment storage
shared with a resize copy. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: avoid use-after-free in poll trace queue dumps
TIPC socket tracepoints dump queue state through tipc_sk_dump(). Most
queue-dump callsites already serialize that walk under the socket lock or
sk->sk_lock.slock, but tipc_poll() calls trace_tipc_sk_poll(...,
TIPC_DUMP_ALL, ...) without holding either lock.
That lets the poll trace path reach tipc_list_dump() and backlog head/tail
dumping while another context dequeues and frees an skb, leaving the trace
helper dereferencing a stale queue entry.
Stop the unlocked poll trace site from requesting queue dumps. Other queue
dump trace callsites keep their existing output under the locking they
already provide, while poll still emits the event itself without walking
live queue members from an unlocked context. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix tid_tx use-after-free on BA session stop
ieee80211_stop_tx_ba_cb() hands tid_tx to kfree_rcu() through
ieee80211_remove_tid_tx(), and then reads tid_tx->ndp after dropping
sta->lock:
ieee80211_remove_tid_tx(sta, tid); /* kfree_rcu(tid_tx, rcu_head) */
...
spin_unlock_bh(&sta->lock);
if (start_txq)
ieee80211_agg_start_txq(sta, tid, false);
if (send_delba)
ieee80211_send_delba(..., tid_tx->ndp);
That read is not covered by an RCU read-side critical section, and it runs
in preemptible process context: both callers hold the wiphy mutex, reaching
it either from the ieee80211_ba_session_work() wiphy work or from
ieee80211_sta_tear_down_BA_sessions() during station teardown.
Softirqs can run in that window too, both from the local_bh_enable() that
ends ieee80211_agg_start_txq() and from any interrupt exit, so the RCU
callback can free tid_tx before the read.
Driving the function from a test module with the grace period forced into
that window, KASAN reports the read, and the free arrives on the ordinary
RCU softirq path:
BUG: KASAN: slab-use-after-free in ieee80211_stop_tx_ba_cb+0x3cd/0x400
Read of size 1 at addr ffff888002b9f52e by task kworker/0:1/10
[...]
Freed by task 57:
__kasan_slab_free+0x47/0x70
__rcu_free_sheaf_prepare+0x70/0x250
rcu_free_sheaf_nobarn+0x18/0x40
rcu_core+0x426/0x1310
handle_softirqs+0x144/0x590
__irq_exit_rcu+0xea/0x150
irq_exit_rcu+0x9/0x20
sysvec_apic_timer_interrupt+0x6b/0x80
asm_sysvec_apic_timer_interrupt+0x1a/0x20
send_delba is only set when tx_stop is set, which happens for
AGG_STOP_LOCAL_REQUEST alone, so this is reached on local teardown -
session idle timeout, PTK rekey, suspend, HW reconfig - and not from a
peer's DELBA.
Read ndp into a local before the session is freed, while sta->lock is still
held. tid_tx->ndp has a single writer, in
ieee80211_tx_ba_session_handle_start(), which cannot run concurrently here:
both paths are serialised by the wiphy mutex, and the session is already
marked HT_AGG_STATE_STOPPING at this point. tid_tx->ndp is also the only
tid_tx dereference left after ieee80211_remove_tid_tx() in this function.
[move/change the comment a bit to be more general not just on ndp,
initialize ndp directly] |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_misc: reject a flag character as the field delimiter
The registration string starts with a user chosen delimiter that
separates the individual fields. So that the field parsers terminate
even on a truncated string create_entry() pads the buffer with that
same delimiter:
memset(buf + count, del, 8);
Most fields are scanned for the delimiter with strchr()/scanarg() and
happily stop on the padding. The flags field is different: instead of
scanning for the delimiter check_special_flags() consumes the flag
characters 'P', 'O', 'C' and 'F' and stops at the first byte that is
none of them, relying on the trailing delimiter to end the scan.
If the delimiter is itself a flag character the padding no longer acts
as a terminator. The scan swallows all eight padding bytes and keeps
reading past the end of the allocation until it hits a byte that is
not a flag character. For example registering
PaPEPPxPPiP
with 'P' as the delimiter (name "a", type extension, magic "x",
interpreter "i", empty flags) leaves the flag scan running off the end
of the buffer. The registration is rejected in the end because the
parser does not stop exactly at buf + count, but only after the out of
bounds read has already happened. With an unlucky allocation layout the
scan can walk into an unmapped page; under KASAN it is reported as a
slab out of bounds read. binfmt_misc mounts are available to
unprivileged users in a user namespace so the read is reachable without
privileges.
Reject a delimiter that is one of the flag characters up front. Such a
registration was always rejected anyway, only after the out of bounds
read, so no valid registration string changes meaning. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_reporting: use system_freezable_wq to fix UAF during suspend
During PM freeze (e.g. S3 suspend or S4 hibernation), device drivers like
virtio_balloon reset their underlying virtio devices and delete their
virtqueues via vdev->config->del_vqs().
However, page reporting work (page_reporting_process) was scheduled on the
global system_wq. Because system_wq lacks the WQ_FREEZABLE flag, the PM
freezer skips it, leaving page_reporting_process active during suspend.
If pages are freed into the buddy allocator while suspending (for example,
when core MM invokes the balloon shrinker during S4 hibernation image
saving), page reporting triggers virtballoon_free_page_report() on deleted
virtqueues, resulting in a Use-After-Free / General Protection Fault:
[ 196.795226] general protection fault, probably for non-canonical address 0xaa1436fe70dae6df: 0000 [#1] SMP NOPTI
[ 196.825967] Workqueue: events page_reporting_process
[ 196.831038] RIP: 0010:virtqueue_add_split+0x233/0x4c0 [virtio_ring]
[ 196.927073] virtballoon_free_page_report+0x3a/0xe0 [virtio_balloon]
[ 196.946943] page_reporting_process+0x370/0x4f0
Fix this by switching page reporting work to system_freezable_wq. This
ensures that the PM freezer pauses page_reporting_process before device
drivers destroy their reporting virtqueues. Because the reporting worker
is frozen, memory reclamation/freeing (e.g. via shrinker execution) can
safely return pages to MM during freeze without triggering unfrozen
reporting work on deleted virtqueues.
This aligns with the driver's existing design. The comment in
virtballoon_freeze() states:
/*
* The workqueue is already frozen by the PM core before this
* function is called.
*/
Testing:
I have verified these fixes using Google’s virtualization infrastructure
by running continuous suspend/resume iterations (40+ cycles) while
churning memory using stress-ng (`stress-ng --vm 4 --vm-bytes 60%
--timeout 1`) to constantly create free pages for the buddy allocator. We
also set the `page_reporting_order` parameter to 0 to make the page
reporting worker highly sensitive, forcing it to pick up any 4K free
pages. This confirmed that the UAF crashes are no longer reproducible. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: stop fast-leave after deleting a port group
br_multicast_leave_group() iterates mp->ports with pp = &p->next in
its fast-leave path. After br_multicast_del_pg() removes p,
continuing the loop advances pp through the deleted entry.
If multicast-to-unicast was enabled, the bridge can hold multiple port
groups for the same port and group with different source MAC
addresses. Once multicast-to-unicast is disabled,
br_port_group_equal() matches those entries by port only. A fast leave
can then delete one entry and continue from its stale next pointer,
leaving mp->ports pointing at a deleted port group.
Fast leave only needs to remove one matching port group. Break after
br_multicast_del_pg() so the loop stops before dereferencing the
removed entry. |
| In the Linux kernel, the following vulnerability has been resolved:
net: pktgen: fix proc entry use-after-free
pktgen_change_name() replaces pkt_dev->entry while holding t->if_lock.
pktgen_remove_device() removes the same entry before
_rem_dev_from_if_list() takes that lock.
This allows the following interleaving:
CPU 0 (NETDEV_CHANGENAME) CPU 1 (kpktgend)
if_lock(t)
proc_remove(pkt_dev->entry)
proc_remove(pkt_dev->entry)
pkt_dev->entry = proc_create_data(...)
if_unlock(t)
The kthread can pass the stale proc_dir_entry to proc_remove() after the
rename path has freed it. A reproducer with a widened race window reports:
BUG: KASAN: slab-use-after-free in proc_remove+0x78/0x80
Read of size 8 at addr ffff8881478fea70 by task kpktgend_0/67
Call Trace:
proc_remove+0x78/0x80
pktgen_remove_device.isra.0+0x11c/0x4c0
pktgen_thread_worker+0x1214/0x6bc0
kthread+0x2c6/0x3b0
Allocated by task 95:
__proc_create+0x204/0x790
proc_create_data+0x72/0xe0
pktgen_thread_write+0xd61/0x1510
Freed by task 28:
kmem_cache_free+0xcb/0x3d0
proc_free_inode+0x5b/0x80
rcu_core+0x50a/0x1850
The buggy address belongs to the object at ffff8881478fea00
which belongs to the cache proc_dir_entry of size 192
Move proc_remove() into the if_lock-protected list removal helper. Keep it
before list_del_rcu() to preserve the ordering required by add_device().
The rename path must then finish replacing the entry before removal, or
it observes that the device is no longer on the list. |
| In the Linux kernel, the following vulnerability has been resolved:
veth: convert frag_list skbs before running XDP
A frag_list skb can reach veth with data_len set but nr_frags zero.
veth_convert_skb_to_xdp_buff() only converts skbs that are shared,
locked, have frags[], or do not have enough headroom. It later uses
skb_is_nonlinear() to decide whether to set XDP_FLAGS_HAS_FRAGS and
xdp_frags_size.
That exposes frag_list data to XDP as if it were stored in frags[], but
frags[] is empty. AF_XDP copy mode can then trust the bogus XDP fragment
metadata, walk an empty fragment entry, and crash in memcpy() from
__xsk_rcv().
Route non-linear skbs through skb_pp_cow_data() before exposing them to
XDP, and only advertise XDP frags when the resulting skb has frags[].
skb_copy_bits() already handles frag_list input, and skb_pp_cow_data()
builds frags[] output with skb_add_rx_frag(), which is the
representation XDP multi-buffer expects. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: use neigh_ha_snapshot() in route_shortcircuit()
The neighbour hardware address n->ha can be updated asynchronously by the
neighbour subsystem, protected by n->ha_lock seqlock. Reading n->ha without
holding the seqlock loop can lead to torn reads or reading a partially updated
MAC address.
Use neigh_ha_snapshot() in route_shortcircuit() to safely copy n->ha under
read_seqbegin()/read_seqretry() lock protection before using it.
Note that arp_reduce() and neigh_reduce() seem to have the same issue
left for future patches. |
