| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| [This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]
With the introduction of Grant Table v2 came the requirement to be able to
switch between versions. Switching from v1 to v2 reduces the number of
valid grant references, as a bigger shared entry structure is then needed
while the shared table doesn't change size. Switching from v2 back to v1
the status frames, which are separate in v2, go away.
Code holding, but intermediately dropping and then re-acquiring the grant
table lock, sometimes wrongly assumes that said properties wouldn't change
across the window in time where the lock is not being held.
The v1 -> v2 issue is CVE-2026-62435.
The v2 -> v1 issue is CVE-2026-62436. |
| Accessing the vNUMA configuration data of a guest is still possible when
domain destruction has already started. The cleaning up of that
configuration information is not synchronized with its retrieval by a
device model controlling the guest. |
| Accesses to the CMOS memory contents are done using an indirect IO port
pair. Therefore Xen needs to cache the guest chosen index, and one of
the usages of the index didn't take the necessary locking to avoid
concurrent changes. As a result, a guest could change the index after
it being checked, causing a subsequent out-of-bound read access to the
contents of an array. |
| The logic to handle periodic Viridian STIMERs performs a division with an
unchecked user-controlled divisor value, that can be set to zero to cause a #DE
fault. |
| Race in USB in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Medium) |
| Hyland Alfresco Transformation Service allows unauthenticated attackers to achieve both arbitrary file read and server-side request forgery through the absolute path traversal. |
| SurrealDB versions before 3.1.0 contain a time-of-check/time-of-use race condition in the HTTP /rpc endpoint that allows unauthenticated requests to inherit authenticated session state. Unauthenticated attackers can send concurrent requests to the /rpc endpoint while legitimate authenticated traffic is active to execute operations with hijacked user privileges. |
| Flameshot is powerful yet simple to use screenshot software. Prior to 14.0.0, the Open With feature wrote screenshots to a predictable temporary path and followed symlinks, creating a time-of-check to time-of-use race that allowed a local unprivileged attacker on the same machine to pre-plant a symlink and cause Flameshot to write PNG data through it, overwriting any file the victim user could write. This issue is fixed in version 14.0.0. |
| A Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability in seunshare of selinux policycoreutils allows a user calling seunshare that is running in the unconfined SELinux domain to delete arbitrary root-owned files,
This issue affects policycoreutils through 3.10. |
| RabbitMQ is a messaging and streaming broker. Prior to 4.1.11 and 4.2.6 on Windows, the RabbitMQ management plugin static file handler rabbit_mgmt_wm_static can pass URL-encoded backslashes to erl_prim_loader:read_file_info before path validation when multiple management extension plugins are enabled, causing outbound DNS and SMB requests to attacker-controlled UNC paths. This issue is fixed in versions 4.1.11 and 4.2.6. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: close TOCTOU race while computing rcv_wnd
The MPTCP output path access locklessly the MPTCP-level ack_seq
in multiple times, using possibly different values for the data_ack
in the DSS option and to compute the announced rcv wnd for the same
packet.
Refactor the cote to avoid inconsistencies which may confuse the
peer. Also ensure that the MPTCP level rcv wnd is updated only when
the egress packet actually contains a DSS ack. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mctp: usb: fix race between urb completion and rx_retry cancellation
It's possible that sequencing between setting ->stopped and cancelling
the rx_retry work (in ndo_stop) could leave us with an urb queued:
T1: ndo_stop T2: rx_retry_work
------------ ----------------
LD: ->stopped => false
ST: ->stopped <= true
usb_kill_urb()
mctp_usb_rx_queue()
usb_submit_urb()
cancel_delayed_work_sync()
That urb completion can then re-schedule rx_retry_work.
Strenghen the sequencing between the stop (preventing another requeue)
and the cancel by updating both atomically under a new rx lock. After
setting ->rx_stopped, and cancelling pending work, we know that the
requeue cannot occur, so all that's left is killing any pending urb. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gem: fix race between change_handle and handle_delete
drm_gem_change_handle_ioctl leaves the old handle live in the IDR
during the window between spin_unlock(table_lock) and the final
spin_lock(table_lock). A concurrent drm_gem_handle_delete on the old
handle succeeds in this window, decrements handle_count to 0, and frees
the GEM object while the new handle's IDR entry still references it.
NULL the old handle's IDR entry before dropping table_lock so that any
concurrent GEM_CLOSE on the old handle sees NULL and returns -EINVAL.
Restore the old entry on the prime-bookkeeping error path. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: adis16260: fix division by zero in write_raw
Add a validation check for the sampling frequency value before using it
as a divisor. A user writing zero to the sampling_frequency sysfs
attribute triggers a division by zero in the kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: nxp-sar-adc: fix division by zero in write_raw
Add a validation check for the sampling frequency value before using it
as a divisor. A user writing zero or a negative value to the
sampling_frequency sysfs attribute triggers a division by zero in the
kernel.
Also prevent unsigned integer underflow when the computed cycle count is
smaller than NXP_SAR_ADC_CONV_TIME, which would wrap the u32 inpsamp to
a huge value. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device close
Since hci_dev_close_sync() can now be called during the reset path, we
should also set HCI_CMD_DRAIN_WORKQUEUE. This avoids queuing timeouts
while the hdev workqueue is being drained. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-buf: fix UAF in dma_buf_fd() tracepoint
Once FD_ADD() returns, the fd is live in the file descriptor table
and a thread sharing that table can close() it before DMA_BUF_TRACE()
runs. The close drops the last reference, __fput() frees the dma_buf,
and the tracepoint then dereferences dmabuf to take dmabuf->name_lock
-- slab-use-after-free.
Split FD_ADD() back into get_unused_fd_flags() + fd_install() and
emit the tracepoint between them. While the fdtable slot is reserved
with a NULL file pointer, a racing close() returns -EBADF without
entering __fput(), so the dma_buf stays alive across the trace. Same
approach as commit 2d76319c4cbb ("dma-buf: fix UAF in dma_buf_put()
tracepoint").
This undoes the FD_ADD() conversion done in commit 34dfce523c90
("dma: convert dma_buf_fd() to FD_ADD()"); FD_ADD() has no place to
hook the tracepoint safely. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: annotate data-races around hdev->req_status
__hci_cmd_sync_sk() sets hdev->req_status under hdev->req_lock:
hdev->req_status = HCI_REQ_PEND;
However, several other functions read or write hdev->req_status without
holding any lock:
- hci_send_cmd_sync() reads req_status in hci_cmd_work (workqueue)
- hci_cmd_sync_complete() reads/writes from HCI event completion
- hci_cmd_sync_cancel() / hci_cmd_sync_cancel_sync() read/write
- hci_abort_conn() reads in connection abort path
Since __hci_cmd_sync_sk() runs on hdev->req_workqueue while
hci_send_cmd_sync() runs on hdev->workqueue, these are different
workqueues that can execute concurrently on different CPUs. The plain
C accesses constitute a data race.
Add READ_ONCE()/WRITE_ONCE() annotations on all concurrent accesses
to hdev->req_status to prevent potential compiler optimizations that
could affect correctness (e.g., load fusing in the wait_event
condition or store reordering). |
| Time-of-check Time-of-use (TOCTOU) race condition vulnerability in Erlang/OTP ssl (dtls_packet_demux module) allows an unauthenticated remote attacker to crash all active DTLS sessions on a listener.
A DTLS server listener uses a single shared dtls_packet_demux gen_server process to route incoming UDP datagrams to the correct connection handler. When a DTLS client reconnects rapidly from the same source address and port (sending multiple ClientHello messages in quick succession), a race condition in the demux's internal gb_trees key-value store causes a {key_exists, {old, Client}} crash, terminating the demux process. Because the demux is shared across all DTLS associations on that listener, its crash immediately kills every active DTLS session, not just the attacker's.
The attack is pre-authentication: the attacker only needs to send UDP datagrams containing valid ClientHello messages from the same source IP and port before the intermediate DOWN monitor message is processed by the gen_server. No credentials, no completed handshake, and no special configuration are required, and the crash can be repeated indefinitely to create a persistent denial of service for all clients of that listener.
This vulnerability is associated with program file lib/ssl/src/dtls_packet_demux.erl.
This issue affects OTP from OTP 25.3 before OTP 29.0.3, OTP 28.5.0.3 and OTP 27.3.4.14, corresponding to ssl from 10.9 before 11.7.3, 11.6.0.3 and 11.2.12.10. |
| Paymenter is a free and open-source webshop solution for management of hosting services. In versions prior to 1.5.5, the credit payment implementation in app/Livewire/Invoices/Show.php executes a pessimistic row lock (lockForUpdate()) outside of an active database transaction. Because MySQL/MariaDB requires an enclosing transaction to enforce row-level locks, the guard is ineffective. Concurrent payment requests can exploit this race condition to read the same credit balance simultaneously, allowing users to pay multiple invoices using the same credit balance. In database systems like MySQL, a row lock only works inside a formal transaction; without one, the lock is completely ignored. Because there is no active lock, two payment requests sent at the exact same millisecond can look at the database at the same time. Both requests see the original credit balance, decide it is sufficient, and approve the payment. Because the payment processes successfully through ExtensionHelper::addPayment(), the application provisions the corresponding services or digital goods, resulting in direct financial or resource loss to the platform. This issue has been fixed in version 1.5.5. |
