Export limit exceeded: 409430 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (10108 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90214 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: xilinx: formatter_pcm: fix stream_data leak on open error In xlnx_formatter_pcm_open(), stream_data is allocated and adata->play_stream or adata->capture_stream is assigned early. If a later step, such as snd_pcm_hw_constraint_step() or snd_pcm_hw_constraint_integer(), fails, the function returns the error immediately. ALSA does not call the close callback when open fails, so stream_data is leaked and the stream pointer is left dangling, pointing to a substream that ALSA frees. A later interrupt would then call snd_pcm_period_elapsed() on the freed substream. Free stream_data and clear the stream pointer on the error paths. | ||||
| CVE-2026-90392 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix potential UAF when reading bpf link info In bpf_link_show_fdinfo and bpf_link_get_info_by_fd, link->prog is accessed without holding any locks. If the prog is concurrently replaced via bpf_link_update, the old prog can be freed, leading to a potential UAF issue. Fix this by accessing link->prog under RCU protection to safely fetch the pointer and guarantee its lifetime while reading its fields. | ||||
| CVE-2026-93137 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix use-after-free on mm_struct in bpf_find_vma() bpf_find_vma() reads task->mm and calls mmap_read_trylock(mm) without holding a reference on the mm. On a foreign task, a concurrent exit_mm() can free the mm_struct between the lockless read and the trylock, resulting in a use-after-free. mm_struct is not SLAB_TYPESAFE_BY_RCU. For the current task, task->mm is stable. For a foreign task, pin the mm under task->alloc_lock and release it with mmput_async(), mirroring commit d8e27d2d22b6 ("bpf: fix mm lifecycle in open-coded task_vma iterator"). Use spin_trylock() instead of get_task_mm() so BPF context does not block on alloc_lock. Reject irqs-disabled contexts and !CONFIG_MMU on the foreign-task path because dropping the mm reference is not safe there. Race: CPU0 (BPF program) CPU1 (exiting task) ============================ ========================== bpf_find_vma(foreign_task): mm = task->mm exit_mm(): task->mm = NULL mmput(mm) -> frees mm_struct mmap_read_trylock(mm) // UAF on mm | ||||
| CVE-2026-90260 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: don't clobber the extent buffer when zeroing it out On a zoned filesystem a freed-but-still-dirty tree block is written out as zeros (EXTENT_BUFFER_ZONED_ZEROOUT) only to keep the zone write pointer advancing. btree_csum_one_bio() implemented this by memzeroing the extent buffer's own folios before submission. That destroys the in-memory buffer while it may still be referenced. In particular btrfs_free_tree_block() can run on it afterwards and reads the header to add a delayed reference; once the header has been zeroed it frees bytenr 0 and corrupts the extent tree (the btrfs_header_bytenr(buf) != 0 ASSERT in btrfs_free_tree_block(), or an "unable to find ref" abort). It is flaky and reproduces under fsstress, e.g. generic/461 and generic/013. Write the zeros to disk from the shared zero page instead and leave the extent buffer content untouched, so any later reference - including the delayed reference from btrfs_free_tree_block() - still sees a valid header. end_bbio_meta_write() now clears writeback on the buffer's own folios, as the bio no longer carries them. | ||||
| CVE-2026-90270 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: arm_mpam: Disable driver unbind to avoid UAF When a user unbinds an MSC and that MSC is the only MSC left for a component then the corresponding mpam_component will be freed. If the user then goes on to read the schemata file in the resctrl filesystem then the mpam_component will be accessed from resctrl_arch_get_config() leading to a use after free. As the MPAM driver is not a module the unbind sysfs interface is the only way to trigger the remove. Instead of dealing with the complexity of allowing some unused MSC to unbind just remove the unbind sysfs interface. | ||||
| CVE-2026-90291 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: module/dups: Fix use-after-free in kmod_dup_req lifetime handling The kmod dups code uses RCU to ensure that a kmod_dup_req instance is freed only after it is no longer referenced. When releasing an instance, the kmod_dup_request_delete() function removes the kmod_dup_req from the dup_kmod_reqs list, waits via synchronize_rcu() and finally frees it. However, this doesn't work correctly because parallel users referencing the instance in kmod_dup_request_exists_wait() don't enter an RCU read-side critical section. This can result in a use-after-free. The kmod_dup_request_exists_wait() function may need to hold a valid reference to a kmod_dup_req instance across a blocking wait until the corresponding modprobe command completes. This makes it unsuitable for RCU. Fix the issue by changing the lifecycle management of kmod_dup_req to use reference counting. | ||||
| CVE-2026-90292 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix use-after-free in siw_accept() siw_accept() looks up the QP supplied by userspace. If that QP is already in RTS, the function jumps to error cleanup before associating the incoming CEP with it. The cleanup tests whether qp->cep is non-NULL and assumes the current call installed the association. However, qp->cep can point to the CEP of an existing connection. The cleanup then drops a reference from the incoming cep, not qp->cep. Once the incoming endpoint loses its remaining references, this can free it before the subsequent cep->qp store, causing a use-after-free. It also clears the existing QP association. Only release the association reference when qp->cep is the incoming CEP. This preserves an existing association and avoids accessing the freed endpoint. | ||||
| CVE-2026-90308 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: Hold QP references for AE and CM processing AE QP fatal events and iWARP CM paths load QPs from dev->qp_xa and then use or reference them outside the xarray lock. erdma_destroy_qp() can drop the destroy-path reference and free QP resources while such a lookup is in flight. Add erdma_qp_get_by_qpn() to acquire a kref under the xarray lock with kref_get_unless_zero(). Remove the QP from the xarray before dropping the destroy-path reference so no new lookup can acquire it while destruction waits for existing users. | ||||
| CVE-2026-90423 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix UAF in ODP init error-handling path rxe_odp_mr_init_user() stores &umem_odp->umem in mr->umem before calling rxe_odp_init_pages(). If rxe_odp_init_pages() fails, rxe_odp_mr_init_user() releases umem_odp and returns an error. rxe_reg_user_mr() then unwinds the error through rxe_cleanup(), rxe_mr_cleanup(), ib_umem_release(mr->umem). There is an IS_ERR_OR_NULL(umem) check at the start of ib_umem_release(). But since mr->umem is NOT reset to NULL in the error handling path of rxe_odp_mr_init_user(), the check passes and it reads already-freed fields like umem->is_dmabuf, causing UAF. Fix the UAF by clearing mr->umem after releasing the failed ODP umem so the MR cleanup path does not release it again. | ||||
| CVE-2026-90429 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Synchronize the error ISR against VINTF (de)init A user VINTF is torn down by tegra241_cmdqv_deinit_vintf(), which runs from the destroy callback and from the init-failure unwind in the alloc handler. It clears the cmdqv->vintfs[] slot and lets the iommufd core free it, but nothing serializes that against the error interrupt: tegra241_cmdqv_isr() reads cmdqv->vintfs[idx] and dereferences the vintf. A concurrent error can make the ISR read a slot mid-clear (a NULL deref) or use a vintf which is about to be freed (a use-after-free). deinit_vintf() also returns idx to the IDA before clearing the slot, so a concurrent create that reuses idx can publish its new vintf into the slot, only for this teardown to erase it again with the stale NULL store. On the other end, tegra241_cmdqv_init_vintf() publishes a new vintf with a plain store to the cmdqv->vintfs[] slot, and the ISR dereferences fields of a published vintf such as vintf->base. A plain store gives no ordering on a weakly-ordered CPU, and a stale VINTF_ERR_MAP bit on a reused idx can make the ISR pick a vintf the moment it is published, before its fields are set or tegra241_vintf_hw_init() runs. The cmdqv->vintfs[0] slot stays NULL until tegra241_cmdqv_init_structures() first creates VINTF0, so the slot 0 read needs the same NULL check. Publish every slot with an smp_store_release(), and read each slot in the ISR with an smp_load_acquire() under a NULL check, so the ISR always sees a fully built vintf or NULL. Also make deinit_vintf() clear the slot, and synchronize_irq() prior to returning idx to the IDA, so no vintf is freed under a running handler and no reused idx is clobbered. | ||||
| CVE-2026-92511 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in ib_destroy_cq_user() When accessing a CQ via the netlink path the only synchronization mechanism for the said CQ is rdma_restrack_get(). Currently, rdma_restrack_del() is invoked at the end of ib_destroy_cq_user(), which is too late, since by that point vendor-specific resources associated with the CQ might already be freed. This can leave a short window where the CQ remains accessible through restrack, leading to a potential use-after-free. Fix this by moving the rdma_restrack_begin_del() call to the start of ib_destroy_cq_user(), ensuring that the CQ is removed from restrack before its internal resources are released. This guarantees that no new users hold references to a CQ that is in the process of destruction. In addition, this change preserves the intended inverted order between create and destroy routines: resources are added to restrack at the end of successful creation, and hence shall be removed from the restrack first thing during the destruction flow, which keeps the lifecycle management consistent and predictable. | ||||
| CVE-2026-93039 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: meson: Keep link pointers valid on realloc failure meson_card_reallocate_links() grows the DAI link and private data arrays with two consecutive krealloc() calls and updates the owner pointers only after both calls have succeeded. A successful krealloc() may move the data: it frees the old block and returns a new one. When that happens for the link array and the second krealloc() then fails, card->dai_link still points to the block that krealloc() already freed, and the error path frees the new block too. The probe error path then calls meson_card_clean_references(), which dereferences card->dai_link and kfree()s it again, resulting in a use-after-free and a double free. Commit card->dai_link and card->num_links right after the first krealloc() succeeds, so the pointer always refers to a valid allocation that meson_card_clean_references() can walk and free. krealloc() with __GFP_ZERO zero-initializes the added entries, so walking them on the error path is safe. With both failure paths reduced to a plain return, drop the goto labels and the error message. | ||||
| CVE-2026-93042 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: Terminate all descriptors without callbacks The DMA Engine client documentation says in the "Terminate APIs" section of Documentation/driver-api/dmaengine/client.rst: "No callback functions will be called for any incomplete transfers." dw-edma instead calls vchan_cookie_complete() when a deferred STOP reaches the interrupt handler. This schedules a callback for the active descriptor and leaves other issued or submitted descriptors queued. A late callback after dmaengine_terminate_sync() can dereference client state that has already been freed, while leftover descriptors may later restart into reused buffers or leak. Move all issued and submitted descriptors to the terminated list whenever termination completes. For a pending STOP, do this from both the DONE and ABORT paths. Complete their cookies in order without scheduling callbacks. A STOP can remain pending until the running transfer raises an interrupt. Make device_synchronize() wait for such a pending STOP to complete before releasing terminated descriptors. Reuse it from free_chan_resources(), then release the remaining virt-dma resources. Sleep instead of busy-polling while waiting, and warn if the existing timeout expires. | ||||
| CVE-2026-92507 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in ib_dealloc_pd_user() When accessing a PD via the netlink path the only synchronization mechanism for the said PD is rdma_restrack_get(). Currently, rdma_restrack_del() is invoked at the end of ib_dealloc_pd_user(), which is too late, since by that point vendor-specific resources associated with the PD might already be freed. This can leave a short window where the PD remains accessible through restrack, leading to a potential use-after-free. Fix this by moving the rdma_restrack_begin_del() call to the start of ib_dealloc_pd_user(), ensuring that the PD is removed from restrack before its internal resources are released. This guarantees that no new users hold references to a PD that is in the process of destruction. In addition, this change preserves the intended inverted order between create and destroy routines: resources are added to restrack at the end of successful creation, and hence shall be removed from the restrack first thing during the destruction flow, which keeps the lifecycle management consistent and predictable. | ||||
| CVE-2026-92508 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in ib_free_cq() When accessing a CQ via the netlink path the only synchronization mechanism for the said CQ is rdma_restrack_get(). Currently, rdma_restrack_del() is invoked at the end of ib_free_cq(), which is too late, since by that point vendor-specific resources associated with the CQ might already be freed. This can leave a short window where the CQ remains accessible through restrack, leading to a potential use-after-free. Fix this by moving the rdma_restrack_del() call to be before the freeing of the vendor-specific resources ensuring that the CQ is removed from restrack before its internal resources are released. This guarantees that no new users hold references to a CQ that is in the process of destruction. | ||||
| CVE-2026-92510 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in ib_destroy_srq_user() When accessing a SRQ via the netlink path the only synchronization mechanism for the said SRQ is rdma_restrack_get(). Currently, rdma_restrack_del() is invoked at the end of ib_destroy_srq_user(), which is too late, since by that point vendor-specific resources associated with the SRQ might already be freed. This can leave a short window where the SRQ remains accessible through restrack, leading to a potential use-after-free. Fix this by moving the rdma_restrack_begin_del() call to the start of ib_destroy_srq_user(), ensuring that the SRQ is removed from restrack before its internal resources are released. This guarantees that no new users hold references to a SRQ that is in the process of destruction. In addition, this change preserves the intended inverted order between create and destroy routines: resources are added to restrack at the end of successful creation, and hence shall be removed from the restrack first thing during the destruction flow, which keeps the lifecycle management consistent and predictable. | ||||
| CVE-2026-93192 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Clear queue->active_job when v3d_fence_create() fails The run_job() callbacks for BIN, RENDER, TFU and CSD assign the incoming job to queue->active_job before calling v3d_fence_create(). If v3d_fence_create() fails, the callback returns NULL without clearing active_job, leaving a dangling pointer. Create a failure path in all run_job() callbacks that clears the active job before returning NULL. The BIN path takes queue->queue_lock around the clear as it races against v3d_overflow_mem_work(); RENDER, TFU and CSD paths have no concurrent reader, so the clear is lock-free. | ||||
| CVE-2026-93382 | 1 Google | 1 Chrome | 2026-09-19 | 8.8 High |
| Use after free in PDFium in Google Chrome prior to 153.0.8010.52 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-90302 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: synchronize heartbeat callbacks with o2net teardown Patch series "ocfs2: harden heartbeat teardown races". This series fixes two OCFS2 heartbeat/o2net teardown races found by KASAN. This patch (of 2): Heartbeat callbacks stay registered while configfs local-node teardown enters o2net_stop_listening(). A node-down event can still run through o2net_disconnect_node() and o2net_set_nn_state() while teardown is destroying o2net_wq, so the later queue/flush operations can hit a dead workqueue. KASAN has caught this as a slab-use-after-free in __queue_work() with the call chain: KASAN slab-use-after-free in __queue_work+0x56/0xa90 Read of size 4 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 __queue_work+0x56/0xa90 srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x19f/0x330 kasan_report+0xe0/0x110 __queue_delayed_work+0x58/0x1e0 queue_delayed_work_on+0xb4/0xc0 o2net_set_nn_state+0x467/0x840 o2net_disconnect_node+0x7b/0xe0 o2net_hb_node_down_cb+0x54/0x60 o2hb_run_event_list+0x236/0x2d0 o2hb_check_slot+0xad4/0xbc0 lock_release+0xc8/0x290 o2hb_check_slot+0x9ea/0xbc0 trace_hardirqs_on+0x18/0x130 o2hb_do_disk_heartbeat+0x646/0xb30 (fs/ocfs2/cluster/heartbeat.c:1079) __lock_acquire+0x466/0x2260 lockdep_hardirqs_on_prepare+0xea/0x1a0 ktime_get_with_offset+0xe9/0x230 o2hb_thread+0x14e/0x770 kthread+0x1ad/0x1f0 ret_from_fork+0x3c9/0x540 __switch_to+0x2e9/0x730 ret_from_fork_asm+0x1a/0x30 Allocated by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 __kmalloc_noprof+0x292/0x760 __alloc_workqueue+0x736/0xc60 alloc_workqueue_noprof+0xb1/0x110 o2net_start_listening+0xe5/0x430 o2nm_node_local_store+0x184/0x310 configfs_write_iter+0x18a/0x210 vfs_write+0x469/0x810 ksys_write+0xd2/0x170 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x313/0x590 rcu_core+0x4f4/0x1320 handle_softirqs+0x156/0x660 queue_delayed_work_on o2net_set_nn_state o2net_disconnect_node o2net_hb_node_down_cb o2hb_run_event_list Keep heartbeat callbacks registered so quorum state still tracks node state, but stop them from driving o2net reconnect/disconnect work once local teardown starts. Mark the transport offline before destroying o2net_wq, wait for any in-flight heartbeat callback to finish, and delay bring-up replay until the new local node is published through o2nm_this_node(). The replay also has to stay serialized with heartbeat callback delivery. Otherwise a live-node snapshot can be copied, a real hb_down callback can install -ENOTCONN for a peer, and the stale replay can call o2net_hb_node_up() for that same peer and queue reconnect work even though heartbeat is already down. The buggy scenario involves two paths, with each column showing the order within that path: local-node teardown: heartbeat node-down callback: 1. configfs local-off enters 1. o2hb_run_event_list() invokes o2net_stop_listening(). o2net_hb_node_down_cb(). 2. teardown heads for 2. the callback reaches destroy_workqueue(o2net_wq). o2net_disconnect_node() and o2net_set_nn_state(). 3. teardown destroys and NULLs 3. the callback flushes or queues o2net_wq. work through o2net_wq. | ||||
| CVE-2026-90268 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: sd: Fix error handling in sd_probe() after large pool creation failure After device_add(&sdkp->disk_dev) succeeds, sd_large_pool_create() failure must unregister disk_dev and let scsi_disk_release() free sdkp. Going through out_free_index kfree()s an already registered device and leaks the sysfs entry. | ||||