| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Tapo C120 v1 and C200 v5
contain a NULL pointer dereference in the HTTPS onboarding connect request parser. The interface is reachable without
authentication after initial setup and does not validate that a password field
is present for certain authentication and encryption parameter combinations,
allowing a malformed request from the same local network to crash the HTTPS service
Successful exploitation may
temporarily make HTTPS management functions unavailable. Repeated malformed
requests may sustain the denial-of-service condition, and recovery may in some
cases require a device reboot. |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: Fix error return when vfs_mkdir() fails
When vfs_mkdir() fails, the error code is not extracted from the
returned error pointer. This causes mkdir_error to be reached with
ret=0, which leads to returning ERR_PTR(0) (NULL) instead of a
proper error pointer.
Fix this by extracting the error code from the error pointer when
vfs_mkdir() fails. |
| A NULL pointer dereference vulnerability in the WatchGuard Fireware OS authentication process allows a remote, unauthenticated attacker to crash the management daemon by sending a specially request to the login interface, resulting in a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: refuse to make a monitor active when it has no queue
A monitor interface only gets a TXQ if it's created active, and one can't
be added later. Setting the flag on a down interface is still allowed, so
the driver is handed a monitor with no queue. ath9k dereferences it:
BUG: kernel NULL pointer dereference, address: 0000000000000066
RIP: 0010:ath_tx_node_init+0x49/0x170 [ath9k]
ath9k_add_interface+0x10c/0x140 [ath9k]
drv_add_interface+0x54/0x250 [mac80211]
ieee80211_do_open+0x32f/0x800 [mac80211]
Reached with CAP_NET_ADMIN by "iw dev X set monitor active" followed by
"ip link set X up". RTNL is held, so netlink operations block behind it.
Refuse the flag when there is no queue to give. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - fix GPF in suspend and resume when unbound
Transport drivers (such as rmi_i2c and rmi_spi) invoke
rmi_driver_suspend() and rmi_driver_resume() on their child rmi_dev
device during system power management events. However, transport drivers
are fully registered and operational even if the physical RMI driver
failed to bind or probe the rmi_dev device.
When rmi_driver_suspend() or rmi_driver_resume() is called on an unbound
rmi_dev, dev_get_drvdata() returns NULL. Calling rmi_disable_irq() or
rmi_enable_irq() without driver data attached causes a NULL pointer
dereference and General Protection Fault when attempting to lock
data->enabled_mutex.
Fix this by checking if driver data is attached to rmi_dev in
rmi_driver_suspend() and rmi_driver_resume(), exiting early if
no driver data is present. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy's ext_authz filter assumes that a request contains a :path pseudoheader when applying query_parameters_to_set or query_parameters_to_remove from an authorization response. A path-less CONNECT request makes request_headers_->Path() return null, and Filter::onComplete dereferences that pointer while parsing the query string. An unauthenticated downstream client can crash the Envoy process when the filter and authorization response use query-parameter mutation. The relevant scope boundary is that the deployment must accept path-less CONNECT and configure ext_authz query-parameter mutation. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1. |
| Dell OpenManage Server Administrator, versions prior to 11.1.0.3, contains a Use of Externally-Controlled Input to Select Classes or Code ('Unsafe Reflection') vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Protection mechanism bypass. |
| Scrapy is a high-level web crawling and scraping framework for Python. From 1.4.0 until 2.14.2, RefererMiddleware in scrapy/spidermiddlewares/referer.py treated a Referrer-Policy response-header value that resembled a Python import path as a referrer policy class, imported the referenced object, and called it. A malicious website could supply a callable such as sys.exit and terminate a crawler processing the response. This issue is fixed in version 2.14.2. |
| If BuildKit daemon is started with --cdi-disabled it can lead to daemon panic when builds try to use CDI devices. This can happen maliciously or by accident. |
| A null pointer dereference vulnerability exists in the Matter SDK (connectedhomeip) before 1.4.0, affecting the ReadRevisionAttribute function used in multiple clusters (Channel, Account Login, TargetNavigator, etc.). The function lacks proper validation of the delegate pointer before dereferencing. A remote unauthenticated attacker can exploit this issue by sending a crafted read request, causing the device to crash (denial of service). This issue has been confirmed in SDK version v1.4 (commit ab3d5ae). |
| Spoofing issue due to invalid pointer in the Graphics component. This vulnerability was fixed in Firefox 156 and Thunderbird 156. |
| Sandbox escape due to invalid pointer in the Graphics component. This vulnerability was fixed in Firefox 156, Firefox ESR 140.16, Firefox ESR 153.3, Thunderbird 156, Thunderbird 140.16, and Thunderbird 153.3. |
| A NULL pointer dereference in mod_xml2enc in Apache Software Foundation Apache HTTP Server before 2.4.69 on all platforms allows an untrusted backend server to cause a denial of service via a proxied response with a charset whose conversion partially succeeds then fails.
Users are recommended to upgrade to version 2.4.69, which fixes this issue. |
| Use of Externally-Controlled Input to Select Classes or Code ('Unsafe Reflection') vulnerability in Unlimited Elements Unlimited Elements For Elementor (Free Widgets, Addons, Templates) unlimited-elements-for-elementor allows Parameter Injection.This issue affects Unlimited Elements For Elementor (Free Widgets, Addons, Templates): from n/a through 2.0.22. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy's ProdClusterManagerFactory::allocateConnPool dereferences transport_socket_options while selecting an HTTP/3 connection pool without first checking whether the pointer is null. LoadBalancerContext implementations used by synthetic, mirror, health-check, and async-client calls can return no transport-socket options. With auto_config and HTTP/3 enabled, routine traffic reaching one of those contexts can crash an Envoy worker. The relevant scope boundary is that the affected branch requires HTTP/3 in the protocol set and a context that supplies no transport-socket options. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1. |
| A flaw was found in the StreamsHub Console for Apache Kafka. Tenant-supplied Kafka client properties from the Console custom resource are copied into the console-api AdminClient configuration without filtering security-sensitive keys, allowing a Console CR author to set config.providers and bootstrap.servers to exfiltrate the console-api ServiceAccount token to an attacker-controlled broker. |
| The Easy PayPal & Stripe Buy Now Button WordPress plugin before 2.0.6 does not derive the payment amount on the server, taking it from a client-supplied field, so an unauthenticated attacker sets an arbitrary lower price for a purchase. |
| The WebToffee Gift Cards for WooCommerce WordPress plugin before 1.3.1 does not validate a user-supplied gift card amount server-side before using it as the cart-item price and store-credit coupon value, allowing unauthenticated users to submit an arbitrary or negative amount, bypassing the configured denominations and manipulating the order total to obtain products without paying. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix NULL pointer dereference in mpi3mr_sas_port_add()
sas_port_alloc_num() can return NULL on memory allocation failure. The
return value is passed directly to sas_port_add() without a NULL check,
which causes a NULL pointer dereference.
Additionally, if sas_port_add() fails, the allocated port is not freed
before jumping to out_fail, leaking the sas_port structure. Call
sas_port_free() to properly release it. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: msc313e: Fix NULL pointer dereference in PM callbacks
msc313e_wdt_probe() doesn't set the driver data for the platform device.
As a result, dev_get_drvdata() in msc313e_wdt_suspend() and
msc313e_wdt_resume() will return NULL, leading to a NULL pointer
dereference afterward.
Set the platform device driver data in msc313e_wdt_probe(). |
