| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Pillow is a Python imaging library. From 5.3.0 until 13.0.0, Pillow can return uninitialized memory as pixels when libtiff performs a short decode of JPEG-compressed or Group 4 fax TIFF data. The _decodeStrip and _decodeTile buffers can be larger than the bytes written by libtiff, but Pillow converts the expected rows without clearing the unwritten tail. The tile path is affected from 5.3.0 and the strip path from 6.0.0. An attacker can supply a crafted TIFF to an application that loads and returns or re-encodes its pixels. This can disclose stale heap contents without memory corruption or a process crash. This issue is fixed in version 13.0.0. |
| Use after free in Remote Desktop Client allows an unauthorized attacker to execute code over a network. |
| Pillow is a Python imaging library. From 9.1.0 until 13.0.0, Pillow can disclose uninitialized stack memory when Image.quantize() uses an empty palette. ImagingPaletteCacheUpdate() leaves a local cache array uninitialized when the palette has zero entries, and the conversion path emits those bytes as output pixel indices. An attacker who controls the palette image can obtain stack contents from a returned PNG or GIF. This can disclose addresses and stack-canary data without an out-of-bounds access, memory corruption, or process crash. This issue is fixed in version 13.0.0. |
| Pillow is a Python imaging library. From 2.6.0 until 13.0.0, Pillow is vulnerable to argument injection when invoking Ghostscript for EPS input. EpsImagePlugin.Ghostscript passes a caller-controlled input filename after -f without converting it to a safe absolute path, so a name beginning with a hyphen can be interpreted as a Ghostscript option. An attacker who controls the filename can inject Ghostscript arguments. Arbitrary command execution specifically requires a leading @ argument-file filename and control of the referenced text file containing additional Ghostscript arguments; the reported chain reproduces with the default -dSAFER invocation. This issue is fixed in version 13.0.0. |
| Pillow is a Python imaging library. Prior to 13.0.0, Pillow's XBM header parser is vulnerable to regular-expression denial of service. In XbmImageFile._open, when an application calls Image.open() on a small crafted XBM file, XbmImagePlugin applies a backtracking expression to the attacker-controlled header before image dimensions are accepted, stalling a worker for minutes and denying service. This issue is fixed in version 13.0.0. |
| A flaw has been found in Saruf-Ratul HR-Payroll-Management-System e7cd81477001afdee95b843fd4137894d9418c9f/3fd6f45ead9f8197510c0910f759e06ee67251e5. Affected by this vulnerability is an unknown functionality of the file chat.php. Executing a manipulation of the argument ID can lead to cross site scripting. It is possible to launch the attack remotely. The exploit has been published and may be used. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. The project was informed of the problem early through an issue report but has not responded yet. |
| The Qode Membership plugin for WordPress is vulnerable to Authentication Bypass leading to Account Takeover in all versions up to, and including, 2.0.6.2 via the qode_membership_check_facebook_user AJAX action. This is due to a typographic error in the Facebook OAuth token verification guard within the qode_membership_login_user_from_social_network function — the guard condition tests an undefined variable ($check_social_useqoder instead of $check_social_user), causing empty() to always return true and rendering the Graph API token verification branch dead code, leaving wp_set_auth_cookie() reachable with no credential or token validation whatsoever. This makes it possible for unauthenticated attackers to log in as any existing WordPress account — including Administrator-level accounts — by supplying a known or enumerated administrator login name (rather than an email address) in the response[email] parameter, which the fallback path in get_user_by('login', $email) resolves to the matching account. Exploitation does require harvesting a valid qode_validate_facebook_login nonce, but this nonce is rendered on any public front-end page containing the [qode_user_login] or [qode_user_register] shortcode and is therefore obtainable without any prior authentication. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in WebRehab Super Forms super-forms allows Path Traversal.This issue affects Super Forms: from n/a through 6.3.316. |
| A weakness has been identified in a2aproject a2a-java up to 1.2.0.Final. This affects the function InMemoryPushNotificationConfigStore.setInfo of the file extras/push-notification-config-store-database-jpa/src/main/java/org/a2aproject/sdk/extras/pushnotificationconfigstore/database/jpa/JpaDatabasePushNotificationConfigStore.java of the component Push Notification Config Store. Executing a manipulation can lead to resource consumption. The attack can be launched remotely. Upgrading to version 1.3.0.Final mitigates this issue. This patch is called b478810a03b4a16841d36aca5c6e87d8f48fce67. You should upgrade the affected component. |
| Vulnerability in the Oracle Purchasing product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Purchasing. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Purchasing accessible data. CVSS 3.1 Base Score 3.5 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:U/C:N/I:L/A:N). |
| Vulnerability in the Installed Base product of Oracle E-Business Suite (component: HTML UI). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Installed Base. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in Installed Base, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Installed Base accessible data as well as unauthorized read access to a subset of Installed Base accessible data. CVSS 3.1 Base Score 6.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N). |
| In the Linux kernel, the following vulnerability has been resolved:
net: microchip: sparx5: clean up PSFP resources on flower setup failure
sparx5_tc_flower_psfp_setup() allocates PSFP stream gate, flow meter and
stream filter resources before adding VCAP actions. If a later step
fails, the resources allocated earlier in the function are not unwound.
Add error paths to release the stream filter, flow meter and stream gate
when setup fails after they have been acquired.
Also make sparx5_psfp_fm_add() return the acquired flow-meter id before
the existing-flow-meter early return. When an existing flow meter is
reused, sparx5_psfp_fm_get() increments its pool reference count, but the
caller previously kept psfp_fmid as 0. If a later setup step failed, the
error path could try to delete flow-meter id 0 instead of the reused flow
meter, leaving the incremented reference behind. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: fix P2P device removal race in brcmf_detach()
When the driver is removed while the user space process that created
the P2P device (e.g. wpa_supplicant) is still exiting, the P2P device
interface is removed twice and the kernel crashes.
The two paths are:
- wpa_supplicant, on exit, sends NL80211_CMD_DEL_INTERFACE for the P2P
device. nl80211_del_interface() holds RTNL and the wiphy mutex and
calls brcmf_p2p_del_vif(), which disables discovery and waits up to
1.5 s for BRCMF_E_IF_DEL. Then it calls brcmf_remove_interface(),
which unregisters the wdev and frees the vif and the ifp.
- brcmf_detach() sets the bus down, so BRCMF_E_IF_DEL never arrives,
and calls brcmf_remove_interface(ifp, false) for the same ifp.
brcmf_p2p_ifp_removed() reads ifp->vif and then blocks on
rtnl_lock(). When brcmf_p2p_del_vif() releases RTNL, it calls
cfg80211_unregister_wdev() on the wdev that was already unregistered
and freed.
The second list_del_rcu() of wdev->list faults on LIST_POISON2:
brcmfmac: brcmf_p2p_del_vif delete P2P vif
brcmfmac: brcmf_p2p_deinit_discovery enter
brcmfmac: brcmf_p2p_del_vif P2P: GO_NEG_PHASE status cleared
brcmfmac: brcmf_detach Enter
brcmfmac: brcmf_bus_change_state 1 -> 0
brcmfmac: brcmf_remove_interface Enter, bsscfgidx=1, ifidx=0
brcmfmac: brcmf_del_if Enter, bsscfgidx=1, ifidx=0
brcmfmac: brcmf_p2p_ifp_removed P2P: device interface removed
[1.5 s later, brcmf_p2p_del_vif() timed out]
brcmfmac: brcmf_remove_interface Enter, bsscfgidx=1, ifidx=0
brcmfmac: brcmf_del_if Enter, bsscfgidx=1, ifidx=0
brcmfmac: brcmf_p2p_ifp_removed P2P: device interface removed
Unable to handle kernel paging request at virtual address dead000000000122
Internal error: Oops: 96000044 [#1] PREEMPT_RT SMP
pc : _cfg80211_unregister_wdev+0x6c/0x264 [cfg80211]
Call trace:
_cfg80211_unregister_wdev+0x6c/0x264 [cfg80211]
cfg80211_unregister_wdev+0x10/0x1c [cfg80211]
brcmf_p2p_ifp_removed+0x84/0xb0 [brcmfmac]
brcmf_remove_interface+0x1f4/0x254 [brcmfmac]
brcmf_detach+0x88/0x180 [brcmfmac]
brcmf_sdio_remove+0x90/0x7b0 [brcmfmac]
brcmf_sdiod_remove+0x20/0xa0 [brcmfmac]
brcmf_ops_sdio_remove+0xbc/0x12c [brcmfmac]
sdio_bus_remove+0x38/0x144
device_release_driver_internal+0x1e8/0x2c0
device_release_driver+0x14/0x20
brcmf_sdio_bus_remove+0x2c/0x40 [brcmfmac]
brcmf_fwvid_unregister_vendor+0xd8/0x170 [brcmfmac]
__exit_compat+0x18/0x418 [brcmfmac_cyw]
__arm64_sys_delete_module+0x1ac/0x244
The log was taken with debug=0x406 on an i.MX 8M Plus board with a
CYW55513 (Sona IF513) on SDIO. The driver is the Ezurio backport of
brcmfmac from v6.18.22 on a 5.4-rt kernel. The code involved is the same
in mainline.
To reproduce:
1. Start wpa_supplicant on wlan0 and let it associate. It creates the
P2P device (iw dev shows "type P2P-device").
2. Stop wpa_supplicant and remove the driver without waiting for
wpa_supplicant to exit:
kill $(pidof wpa_supplicant)
rmmod brcmfmac_cyw brcmfmac
The crash is reproducible on that board.
For the interface without a netdev (the P2P device), take RTNL and the
wiphy mutex in brcmf_detach() before reading iflist, and remove it with
locked=true. If brcmf_p2p_del_vif() runs first, brcmf_detach() finds the
slot empty. If brcmf_detach() runs first, nl80211 does not find the wdev
any more. The interfaces with a netdev are removed as before, because
brcmf_del_if() takes RTNL on its own for the primary interface. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: scrub: fix local_root reference leak in scrub_print_warning_inode()
When paths_from_inode() fails, scrub_print_warning_inode() jumps to err
without dropping the reference taken by btrfs_get_fs_root(), leaking a
reference to the root every time path resolution fails while printing
scrub warnings. Every other error and success path of the function
drops the reference.
Drop the reference on the paths_from_inode() failure path too. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: validate the superblock on resume
dm_integrity_resume() re-reads the superblock from the device so that it
picks up the flags and the recalculate position. It performs no
validation on the result, while the constructor validates the superblock
it reads and sizes all the in-memory structures according to it. The user
may modify the superblock on the underlying device while the dm-integrity
device is suspended, so that the two no longer agree.
In particular, access_journal_data() shifts the journal entry index by
ic->sb->log2_sectors_per_block, while ic->journal_section_sectors and the
journal page list were computed with the value that was present at
constructor time. Increasing log2_sectors_per_block makes the index run
past the end of the journal, and dm-integrity then writes 512 bytes
through lowmem_page_address(NULL).
Snapshot the validated superblock in the constructor and refuse to resume
if any of the fields that describe the on-disk geometry changed. |
| NVIDIA TensorRT-LLM for any platform contains a vulnerability in KvCacheAwareRouter tokenizer loading, where an attacker could cause inclusion of functionality from an untrusted control sphere. A successful exploit might lead to code execution, information disclosure, data tampering, and denial of service. |
| In affected versions of Octopus Server, a user with permission to upload a malicious nuget package is able to deploy a script step so the script executes outside of the parent directory. |
| NVIDIA TensorRT-LLM contains a vulnerability where an attacker could cause a server-side request forgery. A successful exploit of this vulnerability might lead to information disclosure. |
| A misconfiguration issue in the affected service in Control-M/Enterprise Manager and Control-M/Server may allow unauthenticated remote users to access certain service functionality, which could potentially result in information exposure or affect service availability.
This vulnerability affects :
* Control-M/Enterprise Manager versions 9.0.20 to 9.0.22 (excluded) and potentially earlier unsupported versions.
* Control-M/Server versions 9.0.20 to 9.0.22 (excluded) and potentially earlier unsupported versions |
| Grav from 1.7.53.3 before 1.7.53.6 contains an authorization bypass in Debugger::isDebuggerRequestAuthorized() that allows unauthenticated visitors to read /__clockwork/ profiler data via a loopback REMOTE_ADDR fallback. Behind a same-host reverse proxy, remote requests appear as loopback, letting attackers read stored records including administrator plaintext passwords and configuration credentials. |
